fm10k: Align Rx buffers to 512B blocks
Subsystems (2)
PATCH 1/1 fm10k: Align Rx buffers to 512B blocks
While reviewing the i40e driver changes to support page based receive I realized that I had overlooked the fact that the fm10k hardware required a 512 byte alignment for Rx buffers. This patch is meant to address that by changing the alignment for Rx buffers to 512 bytes instead of allowing it to be L1 cache aligned.
--- drivers/net/ethernet/intel/fm10k/fm10k_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/fm10k/fm10k_main.c +1 -1
@@ -272,7 +272,7 @@ static bool fm10k_add_rx_frag(struct fm10k_rx_buffer *rx_buffer,#if (PAGE_SIZE <8192 )unsigned int truesize =FM10K_RX_BUFSZ ;#else -unsigned int truesize =SKB_DATA_ALIGN (size); +unsigned int truesize =ALIGN (size,512 );#endif unsigned int pull_len;
Singh
PATCH 1/1 fm10k: Align Rx buffers to 512B blocks
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Alexander Duyck
Sent: Friday, April 15, 2016 10:01 AM
To: [email protected]; Kirsher, Jeffrey T <[email protected]>; alexander.duyck at gmail.com
Subject: [Intel-wired-lan] [next-queue PATCH] fm10k: Align Rx buffers to 512B blocks
While reviewing the i40e driver changes to support page based receive I realized that I had overlooked the fact that the fm10k hardware required a 512 byte alignment for Rx buffers. This patch is meant to address that by changing the alignment for Rx buffers to 512 bytes instead of allowing it to be L1 cache aligned.
---