thermal: add Intel BXT WhiskeyCove PMIC thermal driver
PATCH 2/3 thermal: add Intel BXT WhiskeyCove PMIC thermal driver
This patch adds support for Intel BXT WhiskeyCove pmic thermal driver which is intended to handle the alert interrupts triggered upon thermal trip point cross and notify the thermal framework appropriately with the zone, temp, crossed trip and event details.
Signed-off-by Yegnesh Iyer <[email protected]>
Signed-off-by Bin Gao <[email protected]>
--- drivers/thermal/Kconfig | 10 +++ drivers/thermal/Makefile | 1 + drivers/thermal/intel_pmic_thermal.c | 159 +++++++++++++++++++++++++++++++++++ 3 files changed, 170 insertions(+) create mode 100644 drivers/thermal/intel_pmic_thermal.c
drivers/thermal/Kconfig +10 -0
@@ -332,6 +332,16 @@ menu "ACPI INT340X thermal drivers" source drivers/thermal/int340x_thermal/Kconfig endmenu +config INTEL_PMIC_THERMAL + tristate "Intel PMIC thermal driver" + depends on X86 && INTEL_SOC_PMIC && REGMAP + help + Select this driver for Intel PMIC with ADC channels monitoring system + temperature measurements and alerts. + This driver is used for monitoring the ADC channels of PMIC and handles + the alert trip point interrupts and notifies the thermal framework with + the trip point and temperature details of the zone. + config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI
drivers/thermal/Makefile +1 -0
@@ -45,6 +45,7 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ +obj-$(CONFIG_INTEL_PMIC_THERMAL) += intel_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_ST_THERMAL) += st/ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
drivers/thermal/intel_pmic_thermal.c new file +159 -0
159 lines not on this page · raw message
Signature · 1 line
1.9.1