net/mlx4_en: Add DCB PFC support through CEE netlink commands
Hello Rana Shahout,
The patch af7d51852631: "net/mlx4_en: Add DCB PFC support through CEE netlink commands" from Jun 21, 2016, leads to the following static checker warning:
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c:164 mlx4_en_dcbnl_set_all() warn: signedness bug returning '(-22)'
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
156 static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev)
This is a u8 function. It's called twice but it looks like the important caller is dcbnl_setall() from net/dcb/dcbnl.c. I dont' think we're returning the right values but I'm not sure what's expected.
157 {
158 struct mlx4_en_priv *priv = netdev_priv(netdev);
159 struct mlx4_en_dev *mdev = priv->mdev;
160 struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg;
161 int err = 0;
162
163 if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE))
164 return -EINVAL;
^^^^^^^^^^^^^^
165
166 if (dcb_cfg->pfc_state) {
167 int tc;
168
169 priv->prof->rx_pause = 0;
170 priv->prof->tx_pause = 0;
171 for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) {
172 u8 tc_mask = 1 << tc;
173
174 switch (dcb_cfg->tc_config[tc].dcb_pfc) {
175 case pfc_disabled:
176 priv->prof->tx_ppp &= ~tc_mask;
177 priv->prof->rx_ppp &= ~tc_mask;
178 break;
179 case pfc_enabled_full:
180 priv->prof->tx_ppp |= tc_mask;
181 priv->prof->rx_ppp |= tc_mask;
182 break;
183 case pfc_enabled_tx:
184 priv->prof->tx_ppp |= tc_mask;
185 priv->prof->rx_ppp &= ~tc_mask;
186 break;
187 case pfc_enabled_rx:
188 priv->prof->tx_ppp &= ~tc_mask;
189 priv->prof->rx_ppp |= tc_mask;
190 break;
191 default:
192 break;
193 }
194 }
195 en_dbg(DRV, priv, "Set pfc on\n");
196 } else {
197 priv->prof->rx_pause = 1;
197 priv->prof->rx_pause = 1;
198 priv->prof->tx_pause = 1;
199 en_dbg(DRV, priv, "Set pfc off\n");
200 }
201
202 err = mlx4_SET_PORT_general(mdev->dev, priv->port,
203 priv->rx_skb_size + ETH_FCS_LEN,
204 priv->prof->tx_pause,
205 priv->prof->tx_ppp,
206 priv->prof->rx_pause,
207 priv->prof->rx_ppp);
208 if (err)
209 en_err(priv, "Failed setting pause params\n");
210 return err;
^^^^^^^^^^This is negatives as well.
211 }
regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dan,
Yes, you are right.
According to other drivers, it seems that the returned values should be:
0, in case of DCB configuration change and reset required. 1, in case of no DCB configuration change .
2, in case of DCB configuration change and reset is NOT required.
I will fix it.
Thank you!
Rana;
-----Original Message-----
From: Dan Carpenter [mailto:[email protected]]
Sent: Saturday, June 25, 2016 1:04 AM
To: Rana Shahout <ranas-VPRAkNaXOzVWk0Htik3J/[email protected]>
Cc: [email protected]
Subject: re: net/mlx4_en: Add DCB PFC support through CEE netlink commands
Hello Rana Shahout,
The patch af7d51852631: "net/mlx4_en: Add DCB PFC support through CEE netlink commands" from Jun 21, 2016, leads to the following static checker warning:
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c:164 mlx4_en_dcbnl_set_all() warn: signedness bug returning '(-22)'
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
156 static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev)
This is a u8 function. It's called twice but it looks like the important caller is dcbnl_setall() from net/dcb/dcbnl.c. I dont' think we're returning the right values but I'm not sure what's expected.
157 {
158 struct mlx4_en_priv *priv = netdev_priv(netdev);
159 struct mlx4_en_dev *mdev = priv->mdev;
160 struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg;
161 int err = 0;
162
163 if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE))
164 return -EINVAL;
^^^^^^^^^^^^^^
165
166 if (dcb_cfg->pfc_state) {
167 int tc;
168
169 priv->prof->rx_pause = 0;
170 priv->prof->tx_pause = 0;
171 for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) {
172 u8 tc_mask = 1 << tc;
173
174 switch (dcb_cfg->tc_config[tc].dcb_pfc) {
175 case pfc_disabled:
176 priv->prof->tx_ppp &= ~tc_mask;
177 priv->prof->rx_ppp &= ~tc_mask;
178 break;
179 case pfc_enabled_full:
180 priv->prof->tx_ppp |= tc_mask;
181 priv->prof->rx_ppp |= tc_mask;
182 break;
183 case pfc_enabled_tx:
184 priv->prof->tx_ppp |= tc_mask;
185 priv->prof->rx_ppp &= ~tc_mask;
186 break;
187 case pfc_enabled_rx:
188 priv->prof->tx_ppp &= ~tc_mask;
189 priv->prof->rx_ppp |= tc_mask;
190 break;
191 default:
192 break;
193 }
194 }
195 en_dbg(DRV, priv, "Set pfc on\n");
196 } else {
197 priv->prof->rx_pause = 1;
197 priv->prof->rx_pause = 1;
198 priv->prof->tx_pause = 1;
199 en_dbg(DRV, priv, "Set pfc off\n");
200 }
201
202 err = mlx4_SET_PORT_general(mdev->dev, priv->port,
203 priv->rx_skb_size + ETH_FCS_LEN,
204 priv->prof->tx_pause,
205 priv->prof->tx_ppp,
206 priv->prof->rx_pause,
207 priv->prof->rx_ppp);
208 if (err)
209 en_err(priv, "Failed setting pause params\n");
210 return err;
^^^^^^^^^^This is negatives as well.
211 }
regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html