powerpc: Thermal control for dual core G5s
PATCH 1/1 powerpc: Thermal control for dual core G5s
Hello Benjamin Herrenschmidt,
The patch ac171c46667c: "[PATCH] powerpc: Thermal control for dual core G5s" from Feb 8, 2006, leads to the following static checker warning:
drivers/macintosh/windfarm_smu_controls.c:83 smu_set_fan()
warn: buffer overflow 'buffer' 16 <= 16
drivers/macintosh/windfarm_smu_controls.c
54 static int smu_set_fan(int pwm, u8 id, u16 value)
55 {
56 struct smu_cmd cmd;
57 u8 buffer[16];
^^^^^^^^^^16 bytes.
58 DECLARE_COMPLETION_ONSTACK(comp);
59 int rc;
60
61 /* Fill SMU command structure */
62 cmd.cmd = SMU_CMD_FAN_COMMAND;
63
64 /* The SMU has an "old" and a "new" way of setting the fan speed
65 * Unfortunately, I found no reliable way to know which one works
66 * on a given machine model. After some investigations it appears
67 * that MacOS X just tries the new one, and if it fails fallbacks
68 * to the old ones ... Ugh.
69 */
70 retry:
71 if (smu_supports_new_fans_ops) {
72 buffer[0] = 0x30;
73 buffer[1] = id;
74 *((u16 *)(&buffer[2])) = value;
75 cmd.data_len = 4;
76 } else {
77 if (id > 7)
^^^^^^Assume id is 7.
78 return -EINVAL;
79 /* Fill argument buffer */
80 memset(buffer, 0, 16);
81 buffer[0] = pwm ? 0x10 : 0x00;
82 buffer[1] = 0x01 << id;
83 *((u16 *)&buffer[2 + id * 2]) = value;
^^^^^^^^^^^^^^^^^^2 + 7 * 2 = 16. We're write two bytes beyond the end of the array.
84 cmd.data_len = 14;
85 }
86 regards,
dan carpenter
Quoted 8 lines · Dan Carpenter
Hello Benjamin Herrenschmidt,
The patch
ac171c46667c: "[PATCH] powerpc: Thermal control for dual core G5s" from Feb 8, 2006, leads to the following static checker warning:
drivers/macintosh/windfarm_smu_controls.c:83smu_set_fan()
warn: buffer overflow 'buffer' 16 <= 16
Thanks. I had a look at it seems like id is actually always smaller than 6. So it's just the check id > 7 that needs to be id > 5 I think and unless some of these machines have a bad device-tree I think we don't actually corrupt memory.
Quoted 51 lines
drivers/macintosh/windfarm_smu_controls.c
54 static intsmu_set_fan(int pwm, u8 id, u16 value)55 {
56 structsmu_cmdcmd;
57 u8 buffer[16];
^^^^^^^^^^
16 bytes.58 DECLARE_COMPLETION_ONSTACK(comp);
59 int rc;
60
61 /* Fill SMU command structure */
62 cmd.cmd =SMU_CMD_FAN_COMMAND;
63
64 /* The SMU has an "old" and a "new" way of setting the fan speed
65 * Unfortunately, I found no reliable way to know which one works
66 * on a given machine model. After some investigations it appears
67 * that MacOS X just tries the new one, and if it fails fallbacks
68 * to the old ones ... Ugh.
69 */
70 retry:
71 if (smu_supports_new_fans_ops) {
72 buffer[0] =0x30;
73 buffer[1] = id;
74 *((u16 *)(&buffer[2])) = value; 75 cmd.data_len = 4;
76 } else {
77 if (id > 7)
^^^^^^
Assume id is 7.78 return
-EINVAL;
79 /* Fill argument buffer */
80 memset(buffer, 0, 16);
81 buffer[0] = pwm ?0x10:0x00; 82 buffer[1] =0x01<< id;
83 *((u16 *)&buffer[2 + id * 2]) = value; ^^^^^^^^^^^^^^^^^^
2 + 7 * 2 = 16. We're write two bytes beyond the end of the array.84 cmd.data_len = 14;
85 }
86regards,
dan carpenter