Skip to contentSkip to conversation

Allwinner DT patches for 4.8, take 2

GIT PULL Maxime Ripard 3 participants 4 messages Jul 15, 2016 – Jul 18, 2016

lore
Share & tools
lore
#0 lore raw

Hi Arnd, Kevin, Olof,

Here is the final (hopefully) pull request for the Allwinner SoCs for the 4.8 merge window.

Thanks!
Maxime

The following changes since commit d509e205d81f074a9b8d93ac80ab56405dede48b:

ARM: dts: sun5i: Enable otg on the auxtex t004 (2016-07-05 08:54:33 +0200)

are available in the git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.8-2

for you to fetch changes up to 339120c5f638727a8359b054ec06ed2d66dc9b19:

ARM: dts: sun8i: Add dts file for inet86dz board (2016-07-11 08:39:27 +0200)

----------------------------------------------------------------
Allwinner DT changes for 4.8, take 2

Another set of changes for the 4.8 merge window, among which:
- Reworking of the DT for the tablets based on Allwinner reference design and q8 designs to avoid duplication as much as possible
- Renaming a DT merged in the first PR for consistency
- Enable a few devices on some boards
- New boards: Polaroid MID2407PXE03, inet86dz

----------------------------------------------------------------
Chen-Yu Tsai (9):
ARM: dts: sun7i: lamobo-r1: Fix USB-based WiFi module power
ARM: dts: sun7i: lamobo-r1: Remove usb1 vbus regulator
ARM: dts: sun8i-h3: Rename sinovoip-bpi-m2-plus to bananapi-m2-plus
ARM: dts: sun7i: lamobo-r1: Fix GPIO flags in reg_ahci_5v
ARM: dts: sun7i: lamobo-r1: Enable audio codec
ARM: dts: sun7i: bananapi-m1-plus: Reindent whole file using tabs
ARM: dts: sun7i: bananapi-m1-plus: Unify suffix for board specific labels
ARM: dts: sun7i: bananapi-m1-plus: red LED is power LED
ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG

Hans de Goede (13):
ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi
ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts
ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi
ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc
ARM: dts: sun5i: reference-design-tablet: Remove mention of q8
ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts
ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts
ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi
ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply
ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04
ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts
ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet
ARM: dts: sun8i: Add dts file for inet86dz board

 arch/arm/boot/dts/Makefile                         |   4 +-
 arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts    | 178 +-----------
 arch/arm/boot/dts/sun5i-a13-q8-tablet.dts          |  38 ++-
 arch/arm/boot/dts/sun5i-a13-utoo-p66.dts           | 180 ++-----------
 ...mon.dtsi => sun5i-reference-design-tablet.dtsi} |  46 +---
 arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 300 ++++++++++++---------
 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts          |  20 +-
 arch/arm/boot/dts/sun8i-a23-inet86dz.dts           |  58 ++++
 .../boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts   |  50 ++++
 .../boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts   | 207 +-------------
 arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts         |  77 +-----
 ...i-m2-plus.dts => sun8i-h3-bananapi-m2-plus.dts} |   6 +-
 arch/arm/boot/dts/sun8i-q8-common.dtsi             | 173 +-----------
 .../boot/dts/sun8i-reference-design-tablet.dtsi    | 216 +++++++++++++++
 ...mon.dtsi => sunxi-reference-design-tablet.dtsi} |   0
 15 files changed, 577 insertions(+), 976 deletions(-)
 rename arch/arm/boot/dts/{sun5i-q8-common.dtsi => sun5i-reference-design-tablet.dtsi} (88%)
 create mode 100644 arch/arm/boot/dts/sun8i-a23-inet86dz.dts
 create mode 100644 arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
 rename arch/arm/boot/dts/{sun8i-h3-sinovoip-bpi-m2-plus.dts => sun8i-h3-bananapi-m2-plus.dts} (97%)
 create mode 100644 arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
 rename arch/arm/boot/dts/{sunxi-q8-common.dtsi => sunxi-reference-design-tablet.dtsi} (100%)
Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160715/f7eab20b/attachment-0001.sig>
#1 lore raw
Quoted 23 lines · CEST Maxime Ripard

Hi Arnd, Kevin, Olof,

Here is the final (hopefully) pull request for the Allwinner SoCs for the 4.8 merge window.

Thanks!
Maxime

The following changes since commit d509e205d81f074a9b8d93ac80ab56405dede48b:

ARM: dts: sun5i: Enable otg on the auxtex t004 (2016-07-05 08:54:33 +0200)

are available in the git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.8-2

for you to fetch changes up to 339120c5f638727a8359b054ec06ed2d66dc9b19:

ARM: dts: sun8i: Add dts file for inet86dz board (2016-07-11 08:39:27 +0200)

----------------------------------------------------------------
Allwinner DT changes for 4.8, take 2

Quoted 7 lines

Another set of changes for the 4.8 merge window, among which:
- Reworking of the DT for the tablets based on Allwinner reference design and q8 designs to avoid duplication as much as possible
- Renaming a DT merged in the first PR for consistency
- Enable a few devices on some boards
- New boards: Polaroid MID2407PXE03, inet86dz

This breaks the allmodconfig build, not pulling:

DTC arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dtb
Error: ../arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts:252.1-18 Label or path usb_power_supply not found

Please send a fixed pull request.

Arnd

#2 lore raw

Hi Maxime,

Quoted 32 lines · Arnd Bergmann
Quoted 23 lines · CEST Maxime Ripard

Hi Arnd, Kevin, Olof,

Here is the final (hopefully) pull request for the Allwinner SoCs for the 4.8 merge window.

Thanks!
Maxime

The following changes since commit d509e205d81f074a9b8d93ac80ab56405dede48b:

ARM: dts: sun5i: Enable otg on the auxtex t004 (2016-07-05 08:54:33 +0200)

are available in the git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.8-2

for you to fetch changes up to 339120c5f638727a8359b054ec06ed2d66dc9b19:

ARM: dts: sun8i: Add dts file for inet86dz board (2016-07-11 08:39:27 +0200)

----------------------------------------------------------------
Allwinner DT changes for 4.8, take 2

Quoted 7 lines

Another set of changes for the 4.8 merge window, among which:
- Reworking of the DT for the tablets based on Allwinner reference design and q8 designs to avoid duplication as much as possible
- Renaming a DT merged in the first PR for consistency
- Enable a few devices on some boards
- New boards: Polaroid MID2407PXE03, inet86dz

Quoted 4 lines

This breaks the allmodconfig build, not pulling:

DTC arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dtb
Error: ../arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts:252.1-18 Label or path usb_power_supply not found

Commit 7409d9ba72ef ("ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG" depends on the regulator/OPP patch that you wanted me to rework.

Please drop this patch for now.

ChenYu

Quoted 3 lines

Please send a fixed pull request.

Arnd

#3 lore raw
In reply to Arnd Bergmann
Quoted 32 lines · Arnd Bergmann
Quoted 23 lines · CEST Maxime Ripard

Hi Arnd, Kevin, Olof,

Here is the final (hopefully) pull request for the Allwinner SoCs for the 4.8 merge window.

Thanks!
Maxime

The following changes since commit d509e205d81f074a9b8d93ac80ab56405dede48b:

ARM: dts: sun5i: Enable otg on the auxtex t004 (2016-07-05 08:54:33 +0200)

are available in the git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.8-2

for you to fetch changes up to 339120c5f638727a8359b054ec06ed2d66dc9b19:

ARM: dts: sun8i: Add dts file for inet86dz board (2016-07-11 08:39:27 +0200)

----------------------------------------------------------------
Allwinner DT changes for 4.8, take 2

Quoted 7 lines

Another set of changes for the 4.8 merge window, among which:
- Reworking of the DT for the tablets based on Allwinner reference design and q8 designs to avoid duplication as much as possible
- Renaming a DT merged in the first PR for consistency
- Enable a few devices on some boards
- New boards: Polaroid MID2407PXE03, inet86dz

Quoted 6 lines

This breaks the allmodconfig build, not pulling:

DTC arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dtb
Error: ../arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts:252.1-18 Label or path usb_power_supply not found

Please send a fixed pull request.

Ouch, sorry for that, I'll send a new pull request that will compile...

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160718/8bf726c4/attachment.sig>