Skip to contentSkip to conversation

2016.07 regression: kwboot does not work on Kirkwood

U-Boot Simon Baatz 1 participant 1 message Aug 2, 2016

lore
Share & tools
lore
#0 lore raw

Hi,

I just tried to boot a freshly built u-boot.kwb using UART boot on a Kirkwood box (IB-NAS6210), but to no avail. An old backup image does not boot either.

After scratching my head for quite some time, I found this change in commit f4db6c976cf ("arm: mvebu: Add runtime detection of UART (xmodem) boot-mode") to kwboot.c:

@@ -652,6 +654,14 @@ kwboot_img_patch_hdr(void *img, size_t size)

        hdr->blockid = IBR_HDR_UART_ID;

+ /*

+        * Subtract mkimage header size from destination address
+        * as this header is not expected by the Marvell BootROM.
+        * This way, the execution address is identical to the
+        * one the image is compiled for (TEXT_BASE).
+        */
+       hdr->destaddr = hdr->destaddr - sizeof(struct image_header);
+
        if (image_ver == 0) {
                struct main_hdr_v0 *hdr_v0 = img;

Reverting this change makes kwboot work again for me.

I don't know what the correct fix is. Should we change hdr->destaddr only for header version 1? (Orion and Kirkwood use header version 0, right?)

- Simon