Skip to contentSkip to conversation

staging: iio: meter: ade7758_ring: Match alignment with open parenthesis

PATCH Superseded Georgiana Rodica Chelu 2 participants 4 messages Sep 19, 2016

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: iio: meter: ade7758_ring: Match alignment with open parenthesis

This patch indents the lines to match alignment with the open parenthesis. Also, it organizes the parameters on a single line, in case the modifications do not break the rule of 80 characters per line.

---
 drivers/staging/iio/meter/ade7758_ring.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/staging/iio/meter/ade7758_ring.c +3 -7
index a6b76d4..57c213d 100644
@@ -38,18 +38,14 @@ static int ade7758_write_waveform_type(struct device *dev, unsigned int type)
 	int ret;
 	u8 reg;
 
-	ret = ade7758_spi_read_reg_8(dev,
-			ADE7758_WAVMODE,
-			&reg);
+	ret = ade7758_spi_read_reg_8(dev, ADE7758_WAVMODE, &reg);
 	if (ret)
 		goto out;
 
 	reg &= ~0x1F;
 	reg |= type & 0x1F;
 
-	ret = ade7758_spi_write_reg_8(dev,
-			ADE7758_WAVMODE,
-			reg);
+	ret = ade7758_spi_write_reg_8(dev, ADE7758_WAVMODE, reg);
 out:
 	return ret;
 }
@@ -94,7 +90,7 @@ static int ade7758_ring_preenable(struct iio_dev *indio_dev)
 				 indio_dev->masklength);
 
 	ade7758_write_waveform_type(&indio_dev->dev,
-		indio_dev->channels[channel].address);
+				    indio_dev->channels[channel].address);
 
 	return 0;
 }
Signature · 1 line
2.7.4
#1 lore raw
Quoted 3 lines · Georgiana Rodica Chelu

This patch indents the lines to match alignment with the open parenthesis. Also, it organizes the parameters on a single line, in case the modifications do not break the rule of 80 characters per line.

The patch looks like it improves the readability of the code. The commit message could be more concise though. Use the imperative. It is not necessary to say "This patch", since it is clear what is being discussed. So the first sentence could be, for example, "Indent lines to match..."

Also, I guess there is some maintainer for this driver. You should send patches to tha maintainer too. See the Submit a patch section of the tutorial to see the suggested call to get_maintainer.pl to find who to also send the patch to.

julia

Quoted 50 lines
---
 drivers/staging/iio/meter/ade7758_ring.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/staging/iio/meter/ade7758_ring.c +3 -8
index a6b76d4..57c213d 100644
@@ -38,18 +38,14 @@ static int ade7758_write_waveform_type(struct device *dev, unsigned int type)
 	int ret;
 	u8 reg;
 
-	ret = ade7758_spi_read_reg_8(dev,
-			ADE7758_WAVMODE,
-			&reg);
+	ret = ade7758_spi_read_reg_8(dev, ADE7758_WAVMODE, &reg);
 	if (ret)
 		goto out;
 
 	reg &= ~0x1F;
 	reg |= type & 0x1F;
 
-	ret = ade7758_spi_write_reg_8(dev,
-			ADE7758_WAVMODE,
-			reg);
+	ret = ade7758_spi_write_reg_8(dev, ADE7758_WAVMODE, reg);
 out:
 	return ret;
 }
@@ -94,7 +90,7 @@ static int ade7758_ring_preenable(struct iio_dev *indio_dev)
 				 indio_dev->masklength);
 
 	ade7758_write_waveform_type(&indio_dev->dev,
-		indio_dev->channels[channel].address);
+				    indio_dev->channels[channel].address);
 
 	return 0;
 }
--

2.7.4

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20160919122255.GA11414%40fireworks.
For more options, visit https://groups.google.com/d/optout.

#2 lore raw

Hi,

Thank you for your advice.

I used the script get_maintainer.pl and there are several maintainers for this driver. It is enough to put a single maintainer on cc, right?

Also, should I create a second version to make the commit message clearer?

Georgiana

Quoted 76 lines · Julia Lawall
Quoted 1 line · Georgiana Rodica Chelu

This patch indents the lines to match alignment with the open

parenthesis.

Quoted 2 lines

Also, it organizes the parameters on a single line, in case the modifications do not break the rule of 80 characters per line.

The patch looks like it improves the readability of the code. The commit message could be more concise though. Use the imperative. It is not necessary to say "This patch", since it is clear what is being discussed. So the first sentence could be, for example, "Indent lines to match..."

Also, I guess there is some maintainer for this driver. You should send patches to tha maintainer too. See the Submit a patch section of the tutorial to see the suggested call to get_maintainer.pl to find who to also send the patch to.

julia

Review

Quoted 7 lines
---
 drivers/staging/iio/meter/ade7758_ring.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
(quoted diff) +0 -0

b/drivers/staging/iio/meter/ade7758_ring.c

drivers/staging/iio/meter/ade7758_ring.c static int ade7758_write_waveform_type(struct

Quoted 4 lines

index a6b76d4..57c213d 100644

drivers/staging/iio/meter/ade7758_ring.c +0 -0
@@ -38,18 +38,14 @@ static int ade7758_write_waveform_type(struct

device *dev, unsigned int type)

drivers/staging/iio/meter/ade7758_ring.c static int ade7758_ring_preenable(struct iio_dev

Quoted 21 lines
drivers/staging/iio/meter/ade7758_ring.c +2 -6
      int ret;
      u8 reg;
 
-     ret = ade7758_spi_read_reg_8(dev,
-                     ADE7758_WAVMODE,
-                     &reg);
+     ret = ade7758_spi_read_reg_8(dev, ADE7758_WAVMODE, &reg);
      if (ret)
              goto out;
 
      reg &= ~0x1F;
      reg |= type & 0x1F;
 
-     ret = ade7758_spi_write_reg_8(dev,
-                     ADE7758_WAVMODE,
-                     reg);
+     ret = ade7758_spi_write_reg_8(dev, ADE7758_WAVMODE, reg);
 out:
      return ret;
 }
@@ -94,7 +90,7 @@ static int ade7758_ring_preenable(struct iio_dev

*indio_dev)

Quoted 11 lines
drivers/staging/iio/meter/ade7758_ring.c +1 -2
                               indio_dev->masklength);
 
      ade7758_write_waveform_type(&indio_dev->dev,
-             indio_dev->channels[channel].address);
+                                 indio_dev->channels[channel].address);
 
      return 0;
 }
--

2.7.4

Quoted 2 lines

--
You received this message because you are subscribed to the Google

Groups "outreachy-kernel" group.

Quoted 1 line

To unsubscribe from this group and stop receiving emails from it, send

an email to [email protected].

Quoted 2 lines

To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/

msgid/outreachy-kernel/20160919122255.GA11414%40fireworks.

Quoted 2 lines

For more options, visit https://groups.google.com/d/optout.

#3 lore raw
Quoted 7 lines · Georgiana Chelu

Hi,

Thank you for your advice.

I used the script get_maintainer.pl and there are several maintainers for this driver. It is enough to put a single maintainer on cc, right?

No, if you used the command as it is in the Submit a patch section, then you should put all of the names that are listed. There is none that is more important than another.

If you just ran get_maintainer with no other arguments, then you get a lot of information about people who have submitted patches on the code, but are not actually maintainers. You should not send the patch to all of those people.

Quoted 2 lines

Also, should I create a second version to make the commit message clearer?

Yes, that would be perfect, thanks.

julia

Quoted 97 lines

Georgiana

On 19 September 2016 at 15:26, Julia Lawall <[email protected]> wrote:

      On Mon, 19 Sep 2016, Georgiana Rodica Chelu wrote:

      > This patch indents the lines to match alignment with the open
      parenthesis.
      > Also, it organizes the parameters on a single line, in case
      the
      > modifications do not break the rule of 80 characters per line.

      The patch looks like it improves the readability of the code. 
      The commit
      message could be more concise though.  Use the imperative.  It
      is not
      necessary to say "This patch", since it is clear what is being
      discussed.
      So the first sentence could be, for example, "Indent lines to
      match..."

      Also, I guess there is some maintainer for this driver.  You
      should send
      patches to tha maintainer too.  See the Submit a patch section
      of the
      tutorial to see the suggested call to get_maintainer.pl to find
      who to
      also send the patch to.

      julia

      >
      > Signed-off-by: Georgiana Rodica Chelu
      <[email protected]>
      > ---
      >  drivers/staging/iio/meter/ade7758_ring.c | 10 +++-------
      >  1 file changed, 3 insertions(+), 7 deletions(-)
      >
      > diff --git a/drivers/staging/iio/meter/ade7758_ring.c
      b/drivers/staging/iio/meter/ade7758_ring.c
      > index a6b76d4..57c213d 100644
      > --- a/drivers/staging/iio/meter/ade7758_ring.c
      > +++ b/drivers/staging/iio/meter/ade7758_ring.c
      > @@ -38,18 +38,14 @@ static int
      ade7758_write_waveform_type(struct device *dev, unsigned int
      type)
      >       int ret;
      >       u8 reg;
      >
      > -     ret = ade7758_spi_read_reg_8(dev,
      > -                     ADE7758_WAVMODE,
      > -                     &reg);
      > +     ret = ade7758_spi_read_reg_8(dev, ADE7758_WAVMODE,
      &reg);
      >       if (ret)
      >               goto out;
      >
      >       reg &= ~0x1F;
      >       reg |= type & 0x1F;
      >
      > -     ret = ade7758_spi_write_reg_8(dev,
      > -                     ADE7758_WAVMODE,
      > -                     reg);
      > +     ret = ade7758_spi_write_reg_8(dev, ADE7758_WAVMODE,
      reg);
      >  out:
      >       return ret;
      >  }
      > @@ -94,7 +90,7 @@ static int ade7758_ring_preenable(struct
      iio_dev *indio_dev)
      >                                indio_dev->masklength);
      >
      >       ade7758_write_waveform_type(&indio_dev->dev,
      > -             indio_dev->channels[channel].address);
      > +                               
       indio_dev->channels[channel].address);
      >
      >       return 0;
      >  }
      > --
      > 2.7.4
      >
Quoted 2 lines

--
You received this message because you are subscribed to the Google

Groups "outreachy-kernel" group.

Quoted 1 line

To unsubscribe from this group and stop receiving emails from it,

send an email to [email protected].

Quoted 1 line

To post to this group, send email to

[email protected].

Quoted 1 line

To view this discussion on the web visithttps://groups.google.com/d/msgid/outreachy-kernel/20160919122255.GA11414%4

0fireworks.

Quoted 2 lines

For more options, visit https://groups.google.com/d/optout.