Skip to contentSkip to conversation

No surround sound with ALC892 on B150M Pro4/D3 - fixed with hdajackretask

DISCUSSION Benjamin Valentin 2 participants 6 messages Oct 17, 2016 – Oct 25, 2016 Sound

lore
Share & tools
lore
#0 lore raw

Hi,

I had a problem with mainboard insofar that it would let me select 5.1 surround output in my sound settings, but sound would only play from the two front speakers, all other channels remained silent.

Some fiddeling with hdajackretask would generate a firmware where two pins that were previously used for rear and LFE are now disabled and two previously disabled pins are now configured as rear and LFE - I left the other pins to their default setting as much as I could. The generated firmware is attached below.

I'd like to help that this will work out of the box in the future, is there any further information I can provide you with?

The board is an Asrock B150M Pro4/D3 [1] with the ALC892 HDA Codec. alsa-info from before the procedure can be found at [2].

I'm running Linux 4.8/alsa 1.1.2 on Ubuntu 16.10

The generated /lib/firmware/hda-jack-retask.fw is

[codec]
0x10ec0892 0x18498892 0

[pincfg]
0x11 0x411111f0
0x12 0x411111f0
0x14 0x01014010
0x15 0x40f000f0
0x16 0x40f000f0
0x17 0x411111f0
0x18 0x01014011
0x19 0x02a19950
0x1a 0x01014012
0x1b 0x02214120
0x1c 0x411111f0
0x1d 0x4005e601
0x1e 0x01452130
0x1f 0x411111f0

[model]
auto

regards,
Benjamin

[1] http://www.asrock.com/mb/Intel/B150M%20Pro4D3/?cat=Specifications
[2] http://www.alsa-project.org/db/?f=8e7b0788cde8967048959d50a57b0bb214ddc7fb

#1 lore raw
Quoted 42 lines · Benjamin Valentin

Hi,

I had a problem with mainboard insofar that it would let me select 5.1 surround output in my sound settings, but sound would only play from the two front speakers, all other channels remained silent.

Some fiddeling with hdajackretask would generate a firmware where two pins that were previously used for rear and LFE are now disabled and two previously disabled pins are now configured as rear and LFE - I left the other pins to their default setting as much as I could. The generated firmware is attached below.

I'd like to help that this will work out of the box in the future, is there any further information I can provide you with?

The board is an Asrock B150M Pro4/D3 [1] with the ALC892 HDA Codec. alsa-info from before the procedure can be found at [2].

I'm running Linux 4.8/alsa 1.1.2 on Ubuntu 16.10

The generated /lib/firmware/hda-jack-retask.fw is

[codec]
0x10ec0892 0x18498892 0

[pincfg]
0x11 0x411111f0
0x12 0x411111f0
0x14 0x01014010
0x15 0x40f000f0
0x16 0x40f000f0
0x17 0x411111f0
0x18 0x01014011
0x19 0x02a19950
0x1a 0x01014012
0x1b 0x02214120
0x1c 0x411111f0
0x1d 0x4005e601
0x1e 0x01452130
0x1f 0x411111f0

Quoted 8 lines

[model]
auto

regards,
Benjamin

[1] http://www.asrock.com/mb/Intel/B150M%20Pro4D3/?cat=Specifications
[2] http://www.alsa-project.org/db/?f=8e7b0788cde8967048959d50a57b0bb214ddc7fb

Does the patch below work for you?

thanks,

Takashi

---
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Fix surround output pins for ASRock B150M mobo

ASRock B150M Pro4/D3 mobo with ALC892 codec doesn't seem to provide proper pins for the surround outputs, hence we need to specify the pincfgs manually with a couple of other corrections.

---
 sound/pci/hda/patch_realtek.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/pci/hda/patch_realtek.c +12 -0
index b582d57fe184..284315555229 100644
@@ -6625,6 +6625,7 @@ enum {
 	ALC891_FIXUP_HEADSET_MODE,
 	ALC891_FIXUP_DELL_MIC_NO_PRESENCE,
 	ALC662_FIXUP_ACER_VERITON,
+	ALC892_FIXUP_ASROCK_MOBO,
 };
 
 static const struct hda_fixup alc662_fixups[] = {
@@ -6901,6 +6902,16 @@ static const struct hda_fixup alc662_fixups[] = {
 			{ }
 		}
 	},
+	[ALC892_FIXUP_ASROCK_MOBO] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x15, 0x40f000f0 }, /* disabled */
+			{ 0x16, 0x40f000f0 }, /* disabled */
+			{ 0x18, 0x01014011 }, /* LO */
+			{ 0x18, 0x01014012 }, /* LO */
+			{ }
+		}
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -6938,6 +6949,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+	SND_PCI_QUIRK(0x1849, 0x5892, "ASRock B150M", ALC892_FIXUP_ASROCK_MOBO),
 	SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
 	SND_PCI_QUIRK(0x1b0a, 0x01b8, "ACER Veriton", ALC662_FIXUP_ACER_VERITON),
 	SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
Signature · 1 line
2.10.1
#2 lore raw
Quoted 1 line · On Thu, 20 Oct 2016 12:18:16 +0200 Takashi Iwai <[email protected]> wrote:

Does the patch below work for you?

Thank you, that works - there is only one typo ;)

Quoted 10 lines
---
 sound/pci/hda/patch_realtek.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
(quoted diff) +0 -0

b/sound/pci/hda/patch_realtek.c index b582d57fe184..284315555229 100644 --- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
static const struct hda_fixup alc662_fixups[] = {

sound/pci/hda/patch_realtek.c static const struct hda_fixup alc662_fixups[] · line 6911

Quoted 10 lines
sound/pci/hda/patch_realtek.c +7 -0
@@ -6901,6 +6902,16 @@ static const struct hda_fixup alc662_fixups[]
 = { { }
 		}
 	},
+	[ALC892_FIXUP_ASROCK_MOBO] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x15, 0x40f000f0 }, /* disabled */
+			{ 0x16, 0x40f000f0 }, /* disabled */
+			{ 0x18, 0x01014011 }, /* LO */
+			{ 0x18, 0x01014012 }, /* LO */
			^^^^^^

should be
+ { 0x15, 0x40f000f0 }, /* disabled */
+ { 0x16, 0x40f000f0 }, /* disabled */
+ { 0x18, 0x01014011 }, /* LO */
+ { 0x1a, 0x01014012 }, /* LO */

otherwise there will be no center/lfe channel.

Thanks!
Benjamin

#3 lore raw
Quoted 29 lines · Benjamin Valentin
Quoted 1 line · On Thu, 20 Oct 2016 12:18:16 +0200 Takashi Iwai <[email protected]> wrote:

Does the patch below work for you?

Thank you, that works - there is only one typo ;)

Quoted 10 lines
---
 sound/pci/hda/patch_realtek.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
(quoted diff) +0 -0

b/sound/pci/hda/patch_realtek.c index b582d57fe184..284315555229 100644 --- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
static const struct hda_fixup alc662_fixups[] = {

sound/pci/hda/patch_realtek.c static const struct hda_fixup alc662_fixups[] · line 6911

Quoted 10 lines
sound/pci/hda/patch_realtek.c +7 -0
@@ -6901,6 +6902,16 @@ static const struct hda_fixup alc662_fixups[]
 = { { }
 		}
 	},
+	[ALC892_FIXUP_ASROCK_MOBO] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x15, 0x40f000f0 }, /* disabled */
+			{ 0x16, 0x40f000f0 }, /* disabled */
+			{ 0x18, 0x01014011 }, /* LO */
+			{ 0x18, 0x01014012 }, /* LO */
			^^^^^^
Quoted 7 lines

should be
+ { 0x15, 0x40f000f0 }, /* disabled */
+ { 0x16, 0x40f000f0 }, /* disabled */
+ { 0x18, 0x01014011 }, /* LO */
+ { 0x1a, 0x01014012 }, /* LO */

otherwise there will be no center/lfe channel.

Doh, yes, it should be 0x1a.
And did the patch work for you?

thanks,

Takashi

#5 lore raw
Quoted 7 lines · Benjamin Valentin

Am 21.10.2016 9:20 vorm. schrieb "Takashi Iwai" <[email protected]>:

Quoted 2 lines

Doh, yes, it should be 0x1a.
And did the patch work for you?

Yes it did.

OK, I merged the patch now.

thanks,

Takashi