musb fixes for v4.9-rc cycle
Subsystems (8)
cover musb fixes for v4.9-rc cycle
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
Regards,
Tony
Tony Lindgren (4):
usb: musb: Fix broken use of static variable for multiple instances
usb: musb: Fix sleeping function called from invalid context for hdrc
glue
usb: musb: Fix PM for hub disconnect
phy: twl4030-usb: Fix for musb session bit based PM
drivers/phy/phy-twl4030-usb.c | 4 +- drivers/usb/musb/musb_core.c | 107 +++++++++++++++++++++++++++++++++++------ drivers/usb/musb/musb_core.h | 13 ++++- drivers/usb/musb/musb_dsps.c | 24 ++++++--- drivers/usb/musb/musb_gadget.c | 28 ++++++++--- drivers/usb/musb/tusb6010.c | 6 +-- 6 files changed, 148 insertions(+), 34 deletions(-)
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161107215020.31399-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
PATCH 1/4 usb: musb: Fix broken use of static variable for multiple instances
We can't use static variable first for checking when musb is initialized when we have multiple musb instances like on am335x.
--- drivers/usb/musb/musb_core.c | 9 +++++---- drivers/usb/musb/musb_core.h | 2 ++ 2 files changed, 7 insertions(+), 4 deletions(-)
drivers/usb/musb/musb_core.c +5 -4
@@ -2296,6 +2296,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)if (status) goto fail5; + musb->is_initialized =1 ;pm_runtime_mark_last_busy (musb->controller);pm_runtime_put_autosuspend (musb->controller);
@@ -2634,7 +2635,6 @@ static int musb_runtime_suspend(struct device *dev)static int musb_runtime_resume (struct device *dev) {struct musb *musb =dev_to_musb (dev); -static int first =1 ;/* * When pm_runtime_get_sync called for the first time in driver
@@ -2645,9 +2645,10 @@ static int musb_runtime_resume(struct device *dev)* Also context restore without save does not make * any sense */ -if (!first) -musb_restore_context (musb); - first =0 ; +if (!musb->is_initialized) +return 0 ; + +musb_restore_context (musb);if (musb->need_finish_resume) { musb->need_finish_resume =0 ;
drivers/usb/musb/musb_core.h +2 -0
@@ -385,6 +385,8 @@ struct musb {int a_wait_bcon;/* VBUS timeout in msecs */ unsigned long idle_timeout;/* Next timeout in jiffies */ + unsigned is_initialized:1; +/* active means connected and not suspended */ unsigned is_active:1;
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161107215020.31399-2-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Johan Hovold
Reviewed-byRe: [PATCH 1/4] usb: musb: Fix broken use of static variable for multiple instances
Quoted 4 lines · Tony Lindgren
We can't use static variable first for checking when musb is initialized when we have multiple musb instances like on am335x.
Signed-off-by Tony Lindgren <[email protected]>
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 2/4 usb: musb: Fix sleeping function called from invalid context for hdrc glue
In reply to a message not in the archiveCommit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer that runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled. And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.
Also note that we now also need to get rid of static int first as that won't work right on devices with two musb instances like am335x.
Later on we may be able to remove other delayed work in the musb driver and just do it from pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
glue layer")
--- drivers/usb/musb/musb_core.c | 69 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_core.h | 7 +++++ drivers/usb/musb/musb_dsps.c | 24 ++++++++++----- drivers/usb/musb/musb_gadget.c | 22 ++++++++++++-- 4 files changed, 112 insertions(+), 10 deletions(-)
drivers/usb/musb/musb_core.c +69 -0
@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;
@@ -2018,6 +2019,66 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +void (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +static void musb_pending_work (struct work_struct *work) +{ +struct musb *musb; +struct musb_pending_work *w; +unsigned long flags; +int error; + + musb = container_of(work, struct musb, pending_resume_work.work); + error =pm_runtime_get_sync (musb->controller); +if (error <0 ) { +dev_err (musb->controller,"failed resume for pending work: %i\n" , + error); + +return ; + } +spin_lock_irqsave (&musb->list_lock, flags); +while (!list_empty (&musb->pending_list)) { + w =list_first_entry (&musb->pending_list, + struct musb_pending_work, + node); +list_del (&w->node); +spin_unlock_irqrestore (&musb->list_lock, flags); +if (w->callback) + w->callback (musb, w->data); +devm_kfree (musb->controller, w); +spin_lock_irqsave (&musb->list_lock, flags); + } +spin_unlock_irqrestore (&musb->list_lock, flags); +pm_runtime_mark_last_busy (musb->controller); +pm_runtime_put_autosuspend (musb->controller); +} + +void musb_queue_resume_work (struct musb *musb, +void (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; + +if (WARN_ON (!callback)) +return ; + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +list_add_tail (&w->node, &musb->pending_list); +spin_unlock_irqrestore (&musb->list_lock, flags); +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
@@ -2065,6 +2126,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
@@ -2215,6 +2277,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)/* Init IRQ workqueue before request_irq */ INIT_WORK (&musb->irq_work, musb_irq_work);INIT_DELAYED_WORK (&musb->deassert_reset_work, musb_deassert_reset); +INIT_DELAYED_WORK (&musb->pending_resume_work, musb_pending_work);INIT_DELAYED_WORK (&musb->finish_resume_work, musb_host_finish_resume);/* setup musb parts of the core (especially endpoints) */
@@ -2312,6 +2375,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) fail3:cancel_work_sync (&musb->irq_work);cancel_delayed_work_sync (&musb->finish_resume_work); +cancel_delayed_work_sync (&musb->pending_resume_work);cancel_delayed_work_sync (&musb->deassert_reset_work);if (musb->dma_controller)musb_dma_controller_destroy (musb->dma_controller);
@@ -2379,6 +2443,7 @@ static int musb_remove(struct platform_device *pdev)cancel_work_sync (&musb->irq_work);cancel_delayed_work_sync (&musb->finish_resume_work); +cancel_delayed_work_sync (&musb->pending_resume_work);cancel_delayed_work_sync (&musb->deassert_reset_work);pm_runtime_get_sync (musb->controller);musb_host_cleanup (musb);
@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; + +schedule_delayed_work (&musb->pending_resume_work,0 ); +if (musb->need_finish_resume) { musb->need_finish_resume =0 ; schedule_delayed_work(&musb->finish_resume_work,
@@ -2649,6 +2717,7 @@ static int musb_runtime_resume(struct device *dev)return 0 ;musb_restore_context (musb); +schedule_delayed_work (&musb->pending_resume_work,0 );if (musb->need_finish_resume) { musb->need_finish_resume =0 ;
drivers/usb/musb/musb_core.h +7 -0
@@ -303,6 +303,7 @@ struct musb_context_registers {struct musb {/* device lock */ spinlock_t lock; +spinlock_t list_lock;/* resume work list lock */ struct musb_io io;const struct musb_platform_ops *ops;
@@ -311,6 +312,7 @@ struct musb {irqreturn_t (*isr)(int ,void *);struct work_struct irq_work;struct delayed_work deassert_reset_work; +struct delayed_work pending_resume_work;struct delayed_work finish_resume_work;struct delayed_work gadget_work;u16 hwvers;
@@ -337,6 +339,7 @@ struct musb {struct list_head control;/* of musb_qh */ struct list_head in_bulk;/* of musb_qh */ struct list_head out_bulk;/* of musb_qh */ +struct list_head pending_list;/* pending work list */ struct timer_list otg_timer;struct notifier_block nb;
@@ -542,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);extern void musb_hnp_stop (struct musb *musb); +void musb_queue_resume_work (struct musb *musb, +void (*callback)(struct musb *musb,void *data), +void *data); +static inline void musb_platform_set_vbus (struct musb *musb,int is_on) {if (musb->ops->set_vbus)
drivers/usb/musb/musb_dsps.c +17 -7
@@ -188,9 +188,8 @@ static void dsps_musb_disable(struct musb *musb)musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +static void dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);
@@ -198,11 +197,6 @@ static void otg_timer(unsigned long _musb)u8 devctl;unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical
@@ -246,6 +240,22 @@ static void otg_timer(unsigned long _musb)break ; }spin_unlock_irqrestore (&musb->lock, flags); +} + +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +int err; + + err =pm_runtime_get (dev); +if (err <0 ) +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); + +if (pm_runtime_active (dev)) +dsps_check_status (musb,NULL ); +else +musb_queue_resume_work (musb, dsps_check_status,NULL );pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev);
drivers/usb/musb/musb_gadget.c +19 -3
@@ -1222,6 +1222,16 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +void musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; +unsigned long flags; + +spin_lock_irqsave (&musb->lock, flags); +musb_ep_restart (musb, req); +spin_unlock_irqrestore (&musb->lock, flags); +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {
@@ -1255,7 +1265,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller); +pm_runtime_get (musb->controller);spin_lock_irqsave (&musb->lock, lockflags);/* don't queue if the ep is down */
@@ -1271,8 +1281,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,list_add_tail (&request->list, &musb_ep->req_list);/* it this is the head of the queue, start i/o ... */ -if (!musb_ep->busy && &request->list == musb_ep->req_list.next) -musb_ep_restart (musb, request); +if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { +if (pm_runtime_active (musb->controller)) +musb_ep_restart (musb, request); +else +musb_queue_resume_work (musb, + musb_ep_restart_resume_work, + request); + } unlock:spin_unlock_irqrestore (&musb->lock, lockflags);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161107215020.31399-3-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 15 lines · Tony Lindgren
Commit
65b3f50ed6fa("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call forpm_runtime_get_synctootg_timerthat runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:[<
c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)I did not notice that as I did not have
CONFIG_DEBUG_ATOMIC_SLEEPenabled. And looks like alsomusb_gadget_queue()suffers from the same problem.
Quoted 6 lines
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.Also note that we now also need to get rid of static int first as that won't work right on devices with two musb instances like am335x.
This paragraph no longer applies to this patch.
Quoted 27 lines
Later on we may be able to remove other delayed work in the musb driver and just do it from
pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- drivers/usb/musb/musb_core.c | 69 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_core.h | 7 +++++ drivers/usb/musb/musb_dsps.c | 24 ++++++++++----- drivers/usb/musb/musb_gadget.c | 22 ++++++++++++-- 4 files changed, 112 insertions(+), 10 deletions(-)drivers/usb/musb/musb_core.c +7
-0+static void musb_pending_work (struct work_struct *work) +{ +struct musb *musb; +struct musb_pending_work *w; +unsigned long flags; +int error; +
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2044
Quoted 10 lines
drivers/usb/musb/musb_core.c +10
-0+ musb = container_of(work, struct musb, pending_resume_work.work); + error =pm_runtime_get_sync (musb->controller); +if (error <0 ) { +dev_err (musb->controller,"failed resume for pending work: %i\n" , + error); + +return ; + } +spin_lock_irqsave (&musb->list_lock, flags); +while (!list_empty (&musb->pending_list)) {
This construct is no longer needed as no work is (and must not be) added while the controller is resumed and list_for_each_entry_safe() would therefore do.
Quoted 24 lines
drivers/usb/musb/musb_core.c +15
-0+ w =list_first_entry (&musb->pending_list, + struct musb_pending_work, + node); +list_del (&w->node); +spin_unlock_irqrestore (&musb->list_lock, flags); +if (w->callback) + w->callback (musb, w->data); +devm_kfree (musb->controller, w); +spin_lock_irqsave (&musb->list_lock, flags); + } +spin_unlock_irqrestore (&musb->list_lock, flags); +pm_runtime_mark_last_busy (musb->controller); +pm_runtime_put_autosuspend (musb->controller); +}@@ -2379,6 +2443,7 @@ static int musb_remove(struct platform_device *pdev)cancel_work_sync (&musb->irq_work);cancel_delayed_work_sync (&musb->finish_resume_work); +cancel_delayed_work_sync (&musb->pending_resume_work);cancel_delayed_work_sync (&musb->deassert_reset_work);pm_runtime_get_sync (musb->controller);musb_host_cleanup (musb);
drivers/usb/musb/musb_core.c static int musb_resume(struct device *dev) · line 2674
Quoted 6 lines
drivers/usb/musb/musb_core.c +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; + +schedule_delayed_work (&musb->pending_resume_work,0 ); +
The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
And then the above should not be needed, right?
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling dsps_check_status() while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).
Quoted 16 lines
drivers/usb/musb/musb_core.c +1
-0if (musb->need_finish_resume) { musb->need_finish_resume =0 ; schedule_delayed_work(&musb->finish_resume_work,@@ -2649,6 +2717,7 @@ static int musb_runtime_resume(struct device *dev)return 0 ;musb_restore_context (musb); +schedule_delayed_work (&musb->pending_resume_work,0 );if (musb->need_finish_resume) { musb->need_finish_resume =0 ;
drivers/usb/musb/musb_gadget.c void musb_ep_restart(struct musb *musb, struct musb_request *req) · line 1225
Quoted 4 lines
drivers/usb/musb/musb_gadget.c +1
-0@@ -1222,6 +1222,16 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +void musb_ep_restart_resume_work (struct musb *musb,void *data)
Missing static keyword.
drivers/usb/musb/musb_gadget.c void musb_ep_restart(struct musb *musb, struct musb_request *req) · line 1233
Quoted 8 lines
drivers/usb/musb/musb_gadget.c +8
-0+{ +struct musb_request *req = data; +unsigned long flags; + +spin_lock_irqsave (&musb->lock, flags); +musb_ep_restart (musb, req); +spin_unlock_irqrestore (&musb->lock, flags); +}
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 12 lines · Johan Hovold
drivers/usb/musb/musb_core.c static int musb_resume(struct device *dev) · line 2674
Quoted 7 lines · Tony Lindgren
drivers/usb/musb/musb_core.c +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; + +schedule_delayed_work (&musb->pending_resume_work,0 ); +The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
Quoted 1 line
And then the above should not be needed, right?
Hmm that's an interesting idea. I think that would allow us to get rid of the delayed work if we check the list both on resume and suspend :)
Quoted 4 lines
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).
And then this should no longer be an issue either.
I'll take a look and will also check the other comments.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 13 lines · Tony Lindgren
Quoted 12 lines · Johan Hovold
drivers/usb/musb/musb_core.c static int musb_resume(struct device *dev) · line 2674
Quoted 7 lines · Tony Lindgren
drivers/usb/musb/musb_core.c +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; + +schedule_delayed_work (&musb->pending_resume_work,0 ); +The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
Quoted 5 lines
Quoted 1 line
And then the above should not be needed, right?
Hmm that's an interesting idea. I think that would allow us to get rid of the delayed work if we check the list both on resume and suspend :)
Note that I was referring to draining the runtime-resume work on system suspend above. I think we still want the delayed work considering that we could stay active for long periods of time.
Quoted 6 lines
Quoted 4 lines
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
It would still be an issue as a system-suspending device could already have been runtime-resumed so that dsps_check_status() would be called directly from the timer function.
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 16 lines · Johan Hovold
Quoted 15 lines · Tony Lindgren
Quoted 13 lines · Johan Hovold
Review static int musb_resume(struct device *dev) · line 2674
Quoted 7 lines · Tony Lindgren
(quoted diff) +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; + + schedule_delayed_work(&musb->pending_resume_work, 0); +The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
And then the above should not be needed, right?
Quoted 7 lines
Quoted 3 lines
Hmm that's an interesting idea. I think that would allow us to get rid of the delayed work if we check the list both on resume and suspend :)
Note that I was referring to draining the runtime-resume work on system suspend above. I think we still want the delayed work considering that we could stay active for long periods of time.
It seems it's the delayed work causing these race issues, so I'd like to avoid it. I think we can do it all from PM runtime resume and checking at the end of musb_queue_resume_work(). We need to introduce is_runtime_suspended though. This is along the lines of what we have in Documentation/power/runtime_pm.txt if you search for completion there.
Below is a version doing things without delayed work, care to check again if you still see races there?
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.
The glue layers should do pm_runtime_get_sync(musb->controller) which dsps glue already does. So that's the musb_core.c device instance. And looks like we have dsps_suspend() call del_timer_sync(&glue->timer) already. I think we're safe here.
Regards,
Tony
8< ----------------------
Quoted 1 line
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glue
Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer that runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled. And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.
Later on we may be able to remove other delayed work in the musb driver and just do it from pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
glue layer")
--- drivers/usb/musb/musb_core.c | 114 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 31 +++++++---- drivers/usb/musb/musb_gadget.c | 21 ++++++-- 4 files changed, 156 insertions(+), 17 deletions(-)
drivers/usb/musb/musb_core.c +110 -4
@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;
@@ -2018,6 +2019,87 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock. +*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node); +devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock. +* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +if (pm_runtime_active (musb->controller)) +return musb_run_resume_work (musb); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
@@ -2065,6 +2147,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
@@ -2556,6 +2639,7 @@ static int musb_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);unsigned long flags; +WARN_ON (!list_empty (&musb->pending_list));musb_platform_disable (musb);musb_generic_disable (musb);
@@ -2579,9 +2663,11 @@ static int musb_suspend(struct device *dev)static int musb_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); -u8 devctl; -u8 mask; +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error; +u8 devctl; +u8 mask;/* * For static cmos like DaVinci, register values were preserved
@@ -2599,6 +2685,7 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; +if (musb->need_finish_resume) { musb->need_finish_resume =0 ; schedule_delayed_work(&musb->finish_resume_work,
@@ -2615,6 +2702,13 @@ static int musb_resume(struct device *dev)musb_start (musb); +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
@@ -2622,14 +2716,18 @@ static int musb_runtime_suspend(struct device *dev) {struct musb *musb =dev_to_musb (dev); +WARN_ON (!list_empty (&musb->pending_list));musb_save_context (musb); + musb->is_runtime_suspended =1 ;return 0 ; }static int musb_runtime_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error;/* * When pm_runtime_get_sync called for the first time in driver
@@ -2651,6 +2749,14 @@ static int musb_runtime_resume(struct device *dev) msecs_to_jiffies(USB_RESUME_TIMEOUT)); } +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); + musb->is_runtime_suspended =0 ; +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
drivers/usb/musb/musb_core.h +7 -0
@@ -303,6 +303,7 @@ struct musb_context_registers {struct musb {/* device lock */ spinlock_t lock; +spinlock_t list_lock;/* resume work list lock */ struct musb_io io;const struct musb_platform_ops *ops;
@@ -337,6 +338,7 @@ struct musb {struct list_head control;/* of musb_qh */ struct list_head in_bulk;/* of musb_qh */ struct list_head out_bulk;/* of musb_qh */ +struct list_head pending_list;/* pending work list */ struct timer_list otg_timer;struct notifier_block nb;
@@ -386,6 +388,7 @@ struct musb {unsigned long idle_timeout;/* Next timeout in jiffies */ unsigned is_initialized:1; + unsigned is_runtime_suspended:1;/* active means connected and not suspended */ unsigned is_active:1;
@@ -542,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);extern void musb_hnp_stop (struct musb *musb); +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data); +static inline void musb_platform_set_vbus (struct musb *musb,int is_on) {if (musb->ops->set_vbus)
drivers/usb/musb/musb_dsps.c +21 -10
@@ -188,21 +188,15 @@ static void dsps_musb_disable(struct musb *musb)musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +/* Caller must take musb->lock */ +static int dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);const struct dsps_musb_wrapper *wrp = glue->wrp;u8 devctl; -unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +206,6 @@ static void otg_timer(unsigned long _musb)dev_dbg (musb->controller,"Poll devctl %02x (%s)\n" , devctl,usb_otg_state_string (musb->xceiv->otg->state)); -spin_lock_irqsave (&musb->lock, flags);switch (musb->xceiv->otg->state) {case OTG_STATE_A_WAIT_VRISE : mod_timer(&glue->timer, jiffies +
@@ -245,8 +238,26 @@ static void otg_timer(unsigned long _musb)default :break ; } -spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; +} + +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if (err <0 ) +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }
drivers/usb/musb/musb_gadget.c +18 -3
@@ -1222,6 +1222,15 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {
@@ -1255,7 +1264,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller); +pm_runtime_get (musb->controller);spin_lock_irqsave (&musb->lock, lockflags);/* don't queue if the ep is down */
@@ -1271,8 +1280,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,list_add_tail (&request->list, &musb_ep->req_list);/* it this is the head of the queue, start i/o ... */ -if (!musb_ep->busy && &request->list == musb_ep->req_list.next) -musb_ep_restart (musb, request); +if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { + status =musb_queue_resume_work (musb, + musb_ep_restart_resume_work, + request); +if (status <0 ) +dev_err (musb->controller,"%s resume work: %i\n" , + __func__, status); + } unlock:spin_unlock_irqrestore (&musb->lock, lockflags);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 28 lines · Tony Lindgren
* Johan Hovold <[email protected]> [161108 12:03]:
drivers/usb/musb/musb_core.c +27
-0+int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback);
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2100
Quoted 10 lines
drivers/usb/musb/musb_core.c +10
-0+devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +if (pm_runtime_active (musb->controller)) +return musb_run_resume_work (musb); + +return error; +}
Hmm I think we can also leave out musb_run_resume_work() at the end, we should not hit that case any longer.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 34 lines · Tony Lindgren
Quoted 33 lines · Tony Lindgren
* Johan Hovold <[email protected]> [161108 12:03]:
drivers/usb/musb/musb_core.c +32
-0+int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); +
Quoted 8 lines
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2100
Quoted 5 lines
drivers/usb/musb/musb_core.c +5
-0+if (pm_runtime_active (musb->controller)) +return musb_run_resume_work (musb); + +return error; +}Hmm I think we can also leave out
musb_run_resume_work()at the end, we should not hit that case any longer.
That seems to be the case, yes. But we still need to process that work somehow also when racing with runtime_resume() (e.g. here or at every call site).
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
In reply to a message not in the archiveQuoted 25 lines · Tony Lindgren
Quoted 16 lines · Johan Hovold
Quoted 15 lines · Tony Lindgren
Quoted 13 lines · Johan Hovold
drivers/usb/musb/musb_core.c static int musb_resume(struct device *dev) · line 2674
Quoted 7 lines · Tony Lindgren
drivers/usb/musb/musb_core.c +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; + +schedule_delayed_work (&musb->pending_resume_work,0 ); +The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
And then the above should not be needed, right?
Quoted 7 lines
Quoted 3 lines
Hmm that's an interesting idea. I think that would allow us to get rid of the delayed work if we check the list both on resume and suspend :)
Note that I was referring to draining the runtime-resume work on system suspend above. I think we still want the delayed work considering that we could stay active for long periods of time.
Quoted 6 lines
It seems it's the delayed work causing these race issues, so I'd like to avoid it. I think we can do it all from PM runtime resume and checking at the end of
musb_queue_resume_work(). We need to introduceis_runtime_suspendedthough. This is along the lines of what we have inDocumentation/power/runtime_pm.txtif you search for completion there.
Sure, if you can avoid processing the deferred work also at runtime-suspend then getting rid of the delayed work would be preferred.
Quoted 2 lines
Below is a version doing things without delayed work, care to check again if you still see races there?
I believe there are still some issues however.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 4 lines
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
Quoted 8 lines
Quoted 3 lines
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.The glue layers should do
pm_runtime_get_sync(musb->controller)which dsps glue already does. So that's themusb_core.cdevice instance. And looks like we havedsps_suspend()calldel_timer_sync(&glue->timer)already. I think we're safe here.
But the point is that the controller might be RPM_ACTIVE if the controller was already runtime resumed when it is system suspended.
Since this (and the previous) patch run the work directly from the timer callback if active, it could end up accessing the controller after it has been system suspended. Specifically, stopping the timer in the glue (parent) suspend callback is too late to avoid this.
pm_runtime_get_sync(musb->controller); musb_runtime_resume() musb_restore_context(); ... musb_suspend() musb_save_context(); otg_timer() pm_runtime_get(); if (pm_runtime_active(musb->controller)) dsps_check_status(); pm_runtime_put_autosuspend(); dsps_suspend() del_timer_sync();
Quoted 84 lines
8< ----------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glueCommit
65b3f50ed6fa("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call forpm_runtime_get_synctootg_timerthat runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:[<
c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)I did not notice that as I did not have
CONFIG_DEBUG_ATOMIC_SLEEPenabled. And looks like alsomusb_gadget_queue()suffers from the same problem.Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.Later on we may be able to remove other delayed work in the musb driver and just do it from
pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- drivers/usb/musb/musb_core.c | 114 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 31 +++++++---- drivers/usb/musb/musb_gadget.c | 21 ++++++-- 4 files changed, 156 insertions(+), 17 deletions(-)drivers/usb/musb/musb_core.c +28
-0@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;@@ -2018,6 +2019,87 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock. +*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node);
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2058
Quoted 10 lines
drivers/usb/musb/musb_core.c +10
-0+devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock.
Caller must also hold an RPM reference.
Quoted 24 lines
drivers/usb/musb/musb_core.c +24
-0+* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback;
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2092
Quoted 10 lines
drivers/usb/musb/musb_core.c +10
-0+ w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ;
But this means you should be able to run the callback below, right? It has to be run from somewhere so otherwise the caller needs to retry instead.
Quoted 22 lines
drivers/usb/musb/musb_core.c +11
-0+ } +spin_unlock_irqrestore (&musb->list_lock, flags); + +if (pm_runtime_active (musb->controller)) +return musb_run_resume_work (musb); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;@@ -2065,6 +2147,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
drivers/usb/musb/musb_core.c static int musb_suspend(struct device *dev) · line 2642
Quoted 4 lines
drivers/usb/musb/musb_core.c +1
-0@@ -2556,6 +2639,7 @@ static int musb_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);unsigned long flags; +WARN_ON (!list_empty (&musb->pending_list));
And this also depends on anyone attempting to queue work having first gotten an RPM reference (so that driver core runtime resumes the device before calling suspend()).
But no, there's actually still a window were this could be false when work is queued while runtime resuming (and eventually is executed from musb_queue_resume_work()).
Quoted 41 lines
drivers/usb/musb/musb_core.c +13
-3musb_platform_disable (musb);musb_generic_disable (musb);@@ -2579,9 +2663,11 @@ static int musb_suspend(struct device *dev)static int musb_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); -u8 devctl; -u8 mask; +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error; +u8 devctl; +u8 mask;/* * For static cmos like DaVinci, register values were preserved @@ -2599,6 +2685,7 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; +if (musb->need_finish_resume) { musb->need_finish_resume =0 ; schedule_delayed_work(&musb->finish_resume_work,@@ -2615,6 +2702,13 @@ static int musb_resume(struct device *dev)musb_start (musb); +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
drivers/usb/musb/musb_core.c static int musb_runtime_suspend(struct device *dev) · line 2719
Quoted 4 lines
drivers/usb/musb/musb_core.c +1
-0@@ -2622,14 +2716,18 @@ static int musb_runtime_suspend(struct device *dev) {struct musb *musb =dev_to_musb (dev); +WARN_ON (!list_empty (&musb->pending_list));
This does not seem to hold as work could get queued while RPM_SUSPENDING unless you also take the list_lock here (or add explicit barriers).
drivers/usb/musb/musb_core.c static int musb_runtime_suspend(struct device *dev) · line 2724
Quoted 5 lines
drivers/usb/musb/musb_core.c +1
-0musb_save_context (musb); + musb->is_runtime_suspended =1 ;return 0 ; }
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 20 lines · Johan Hovold
drivers/usb/musb/musb_core.c static int musb_suspend(struct device *dev) · line 2642
Quoted 13 lines · Tony Lindgren
drivers/usb/musb/musb_core.c +2
-0@@ -2065,6 +2147,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;@@ -2556,6 +2639,7 @@ static int musb_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);unsigned long flags; +WARN_ON (!list_empty (&musb->pending_list));And this also depends on anyone attempting to queue work having first gotten an RPM reference (so that driver core runtime resumes the device before calling
suspend()).
Quoted 3 lines
But no, there's actually still a window were this could be false when work is queued while runtime resuming (and eventually is executed from
musb_queue_resume_work()).
As you just pointed out that can actually never happen and corresponding code can be removed from musb_queue_resume_work(), so scrap this last paragraph too. :)
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
In reply to Johan HovoldQuoted 74 lines · Johan Hovold
Quoted 25 lines · Tony Lindgren
Quoted 16 lines · Johan Hovold
Quoted 15 lines · Tony Lindgren
Quoted 13 lines · Johan Hovold
Review static int musb_resume(struct device *dev) · line 2674
Quoted 7 lines · Tony Lindgren
(quoted diff) +3
-0@@ -2604,6 +2669,9 @@ static int musb_resume(struct device *dev) mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; + + schedule_delayed_work(&musb->pending_resume_work, 0); +The interactions with system suspend looks a bit suspicious. It seems you need to drain any pending resume work on suspend for example.
And then the above should not be needed, right?
Quoted 7 lines
Quoted 3 lines
Hmm that's an interesting idea. I think that would allow us to get rid of the delayed work if we check the list both on resume and suspend :)
Note that I was referring to draining the runtime-resume work on system suspend above. I think we still want the delayed work considering that we could stay active for long periods of time.
Quoted 6 lines
It seems it's the delayed work causing these race issues, so I'd like to avoid it. I think we can do it all from PM runtime resume and checking at the end of
musb_queue_resume_work(). We need to introduceis_runtime_suspendedthough. This is along the lines of what we have inDocumentation/power/runtime_pm.txtif you search for completion there.Sure, if you can avoid processing the deferred work also at runtime-suspend then getting rid of the delayed work would be preferred.
Quoted 2 lines
Below is a version doing things without delayed work, care to check again if you still see races there?
I believe there are still some issues however.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 4 lines
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
Quoted 8 lines
Quoted 3 lines
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.The glue layers should do
pm_runtime_get_sync(musb->controller)which dsps glue already does. So that's themusb_core.cdevice instance. And looks like we havedsps_suspend()calldel_timer_sync(&glue->timer)already. I think we're safe here.But the point is that the controller might be
RPM_ACTIVEif the controller was already runtime resumed when it is system suspended.Since this (and the previous) patch run the work directly from the timer callback if active, it could end up accessing the controller after it has been system suspended. Specifically, stopping the timer in the glue (parent) suspend callback is too late to avoid this.
pm_runtime_get_sync(musb->controller); musb_runtime_resume() musb_restore_context(); ... musb_suspend() musb_save_context();
Quoted 9 lines
otg_timer() pm_runtime_get(); if (pm_runtime_active(musb->controller)) dsps_check_status(); pm_runtime_put_autosuspend(); dsps_suspend() del_timer_sync();
OK so we need to return without doing anything from otg_timer() on pm_runtime_get() to avoid that.
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Quoted 5 lines
Quoted 3 lines
+/*
+ * Called to run work if device is active or else queue the work to happen
+ * on resume. Caller must takemusb->lock.Caller must also hold an RPM reference.
Good point, will add.
Quoted 4 lines
Quoted 4 lines
(quoted diff) +4
-0+ if (musb->is_runtime_suspended) { + list_add_tail(&w->node, &musb->pending_list); + error = 0; + } else {
Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ dev_err(musb->controller, "could not add resume work %p\n", + callback); + devm_kfree(musb->controller, w); + error = -EINPROGRESS;But this means you should be able to run the callback below, right? It has to be run from somewhere so otherwise the caller needs to retry instead.
Well there's no longer need to run the callback at that point any longer and with that removed that should not be an issue.
Anyways, musb->is_runtime_suspended is needed to protect anything from being queued between runtime resume having called musb_run_resume_work() and before pm_runtime_active() is true. At that point the caller could just wait for pm_runtime_active() to be set and run the code. But based on my tests that does not happen and queueing is faster than getting to the pm_runtime_active() state so we just print errors in those cases if we ever hit it later on.
Sounds like the rest of your comments are no longer an issue, please let me know if that's not the case.
Updated version n of the patch below.
Regards,
Tony
8< ---------------------------
Quoted 1 line
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glue
Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer that runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled. And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.
Later on we may be able to remove other delayed work in the musb driver and just do it from pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
glue layer")
--- drivers/usb/musb/musb_core.c | 112 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 34 +++++++++---- drivers/usb/musb/musb_gadget.c | 21 ++++++-- 4 files changed, 157 insertions(+), 17 deletions(-)
drivers/usb/musb/musb_core.c +108 -4
@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;
@@ -2018,6 +2019,85 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock and must hold +* an RPM reference. +*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node); +devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock. +* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
@@ -2065,6 +2145,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
@@ -2556,6 +2637,7 @@ static int musb_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);unsigned long flags; +WARN_ON (!list_empty (&musb->pending_list));musb_platform_disable (musb);musb_generic_disable (musb);
@@ -2579,9 +2661,11 @@ static int musb_suspend(struct device *dev)static int musb_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); -u8 devctl; -u8 mask; +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error; +u8 devctl; +u8 mask;/* * For static cmos like DaVinci, register values were preserved
@@ -2599,6 +2683,7 @@ static int musb_resume(struct device *dev) mask =MUSB_DEVCTL_BDEVICE |MUSB_DEVCTL_FSDEV |MUSB_DEVCTL_LSDEV ;if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status =0 ; +if (musb->need_finish_resume) { musb->need_finish_resume =0 ; schedule_delayed_work(&musb->finish_resume_work,
@@ -2615,6 +2700,13 @@ static int musb_resume(struct device *dev)musb_start (musb); +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
@@ -2622,14 +2714,18 @@ static int musb_runtime_suspend(struct device *dev) {struct musb *musb =dev_to_musb (dev); +WARN_ON (!list_empty (&musb->pending_list));musb_save_context (musb); + musb->is_runtime_suspended =1 ;return 0 ; }static int musb_runtime_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error;/* * When pm_runtime_get_sync called for the first time in driver
@@ -2651,6 +2747,14 @@ static int musb_runtime_resume(struct device *dev) msecs_to_jiffies(USB_RESUME_TIMEOUT)); } +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); + musb->is_runtime_suspended =0 ; +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
drivers/usb/musb/musb_core.h +7 -0
@@ -303,6 +303,7 @@ struct musb_context_registers {struct musb {/* device lock */ spinlock_t lock; +spinlock_t list_lock;/* resume work list lock */ struct musb_io io;const struct musb_platform_ops *ops;
@@ -337,6 +338,7 @@ struct musb {struct list_head control;/* of musb_qh */ struct list_head in_bulk;/* of musb_qh */ struct list_head out_bulk;/* of musb_qh */ +struct list_head pending_list;/* pending work list */ struct timer_list otg_timer;struct notifier_block nb;
@@ -386,6 +388,7 @@ struct musb {unsigned long idle_timeout;/* Next timeout in jiffies */ unsigned is_initialized:1; + unsigned is_runtime_suspended:1;/* active means connected and not suspended */ unsigned is_active:1;
@@ -542,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);extern void musb_hnp_stop (struct musb *musb); +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data); +static inline void musb_platform_set_vbus (struct musb *musb,int is_on) {if (musb->ops->set_vbus)
drivers/usb/musb/musb_dsps.c +24 -10
@@ -188,21 +188,15 @@ static void dsps_musb_disable(struct musb *musb)musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +/* Caller must take musb->lock */ +static int dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);const struct dsps_musb_wrapper *wrp = glue->wrp;u8 devctl; -unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +206,6 @@ static void otg_timer(unsigned long _musb)dev_dbg (musb->controller,"Poll devctl %02x (%s)\n" , devctl,usb_otg_state_string (musb->xceiv->otg->state)); -spin_lock_irqsave (&musb->lock, flags);switch (musb->xceiv->otg->state) {case OTG_STATE_A_WAIT_VRISE : mod_timer(&glue->timer, jiffies +
@@ -245,8 +238,29 @@ static void otg_timer(unsigned long _musb)default :break ; } -spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; +} + +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if (err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); + +return ; + } + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }
drivers/usb/musb/musb_gadget.c +18 -3
@@ -1222,6 +1222,15 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {
@@ -1255,7 +1264,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller); +pm_runtime_get (musb->controller);spin_lock_irqsave (&musb->lock, lockflags);/* don't queue if the ep is down */
@@ -1271,8 +1280,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,list_add_tail (&request->list, &musb_ep->req_list);/* it this is the head of the queue, start i/o ... */ -if (!musb_ep->busy && &request->list == musb_ep->req_list.next) -musb_ep_restart (musb, request); +if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { + status =musb_queue_resume_work (musb, + musb_ep_restart_resume_work, + request); +if (status <0 ) +dev_err (musb->controller,"%s resume work: %i\n" , + __func__, status); + } unlock:spin_unlock_irqrestore (&musb->lock, lockflags);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 45 lines · Tony Lindgren
Quoted 44 lines · Johan Hovold
Quoted 11 lines · Tony Lindgren
Quoted 10 lines · Johan Hovold
Quoted 8 lines · Tony Lindgren
Quoted 4 lines · Johan Hovold
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
Quoted 8 lines
Quoted 3 lines
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.The glue layers should do
pm_runtime_get_sync(musb->controller)which dsps glue already does. So that's themusb_core.cdevice instance. And looks like we havedsps_suspend()calldel_timer_sync(&glue->timer)already. I think we're safe here.But the point is that the controller might be
RPM_ACTIVEif the controller was already runtime resumed when it is system suspended.Since this (and the previous) patch run the work directly from the timer callback if active, it could end up accessing the controller after it has been system suspended. Specifically, stopping the timer in the glue (parent) suspend callback is too late to avoid this.
pm_runtime_get_sync(musb->controller); musb_runtime_resume() musb_restore_context(); ... musb_suspend() musb_save_context(); otg_timer() pm_runtime_get(); if (pm_runtime_active(musb->controller)) dsps_check_status(); pm_runtime_put_autosuspend();
Quoted 6 lines
Quoted 3 lines
dsps_suspend() del_timer_sync();OK so we need to return without doing anything from
otg_timer()onpm_runtime_get()to avoid that.
I'm afraid that won't work as pm_runtime_get() would still succeed (i.e. even after musb_suspend()).
See 6f3c77b040fc ("PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2").
Quoted 2 lines
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Yes, and make sure to stop polling in musb_suspend(). Would it be possible to use the enable and disable ops for this until then?
Quoted 24 lines
Quoted 5 lines
Quoted 3 lines
+/*
+ * Called to run work if device is active or else queue the work to happen
+ * on resume. Caller must takemusb->lock.Caller must also hold an RPM reference.
Good point, will add.
Quoted 4 lines
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else {Quoted 8 lines
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2093
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ;But this means you should be able to run the callback below, right? It has to be run from somewhere so otherwise the caller needs to retry instead.
Well there's no longer need to run the callback at that point any longer and with that removed that should not be an issue.
Quoted 7 lines
Anyways,
musb->is_runtime_suspendedis needed to protect anything from being queued between runtime resume having calledmusb_run_resume_work()and beforepm_runtime_active()is true. At that point the caller could just wait forpm_runtime_active()to be set and run the code. But based on my tests that does not happen and queueing is faster than getting to thepm_runtime_active()state so we just print errors in those cases if we ever hit it later on.
But for a generic solution, this race could still be an issue. What about musb_gadget_queue() for example? Would not failing to start I/O if racing with resume be a problem?
Quoted 2 lines
Sounds like the rest of your comments are no longer an issue, please let me know if that's not the case.
I think the barrier comment for the WARN_ON on musb_runtime_suspend() still applies.
Quoted 43 lines
8< ---------------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glueCommit
65b3f50ed6fa("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call forpm_runtime_get_synctootg_timerthat runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:[<
c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)I did not notice that as I did not have
CONFIG_DEBUG_ATOMIC_SLEEPenabled. And looks like alsomusb_gadget_queue()suffers from the same problem.Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake as noted by Johan Hovold <[email protected]>.Later on we may be able to remove other delayed work in the musb driver and just do it from
pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- drivers/usb/musb/musb_core.c | 112 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 34 +++++++++---- drivers/usb/musb/musb_gadget.c | 21 ++++++-- 4 files changed, 157 insertions(+), 17 deletions(-)
drivers/usb/musb/musb_core.c static int musb_runtime_suspend(struct device *dev) · line 2719
Quoted 6 lines
drivers/usb/musb/musb_core.c +2
-0@@ -2622,14 +2714,18 @@ static int musb_runtime_suspend(struct device *dev) {struct musb *musb =dev_to_musb (dev); +WARN_ON (!list_empty (&musb->pending_list));musb_save_context (musb); + musb->is_runtime_suspended =1 ;
Isn't the compiler free to reorder the store to is_runtime_suspended here so that the WARN_ON could trigger when queuing is racing with runtime suspend?
Removing the WARN_ON, or moving it under list_lock while updating is_runtime_suspended should do.
drivers/usb/musb/musb_dsps.c static void otg_timer(unsigned long _musb) · line 254
Quoted 13 lines
drivers/usb/musb/musb_dsps.c +10
-0return 0 ; } +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if (err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);
So as mentioned above, this would not be sufficient to detect that dev has been (system) suspended.
Quoted 32 lines
drivers/usb/musb/musb_dsps.c +9
-0+ +return ; + } + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }drivers/usb/musb/musb_gadget.c +9
-0@@ -1222,6 +1222,15 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {
drivers/usb/musb/musb_gadget.c static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, · line 1267
Quoted 5 lines
drivers/usb/musb/musb_gadget.c +1
-1@@ -1255,7 +1264,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller); +pm_runtime_get (musb->controller);
Add the missing error handling here too?
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 50 lines · Johan Hovold
Quoted 49 lines · Tony Lindgren
Quoted 47 lines · Johan Hovold
Quoted 11 lines · Tony Lindgren
Quoted 10 lines · Johan Hovold
Quoted 8 lines · Tony Lindgren
Quoted 4 lines · Johan Hovold
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
Quoted 8 lines
Quoted 3 lines
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.The glue layers should do
pm_runtime_get_sync(musb->controller)which dsps glue already does. So that's themusb_core.cdevice instance. And looks like we havedsps_suspend()calldel_timer_sync(&glue->timer)already. I think we're safe here.But the point is that the controller might be
RPM_ACTIVEif the controller was already runtime resumed when it is system suspended.Since this (and the previous) patch run the work directly from the timer callback if active, it could end up accessing the controller after it has been system suspended. Specifically, stopping the timer in the glue (parent) suspend callback is too late to avoid this.
pm_runtime_get_sync(musb->controller); musb_runtime_resume() musb_restore_context(); ... musb_suspend() musb_save_context(); otg_timer() pm_runtime_get(); if (pm_runtime_active(musb->controller)) dsps_check_status(); pm_runtime_put_autosuspend(); dsps_suspend() del_timer_sync();
Quoted 8 lines
Quoted 2 lines
OK so we need to return without doing anything from
otg_timer()onpm_runtime_get()to avoid that.I'm afraid that won't work as
pm_runtime_get()would still succeed (i.e. even aftermusb_suspend()).See
6f3c77b040fc("PM / Runtime: letrpm_resume()succeed ifRPM_ACTIVE, even when disabled, v2").
But doesn't that assume that we have musb core as in musb->controller in RPM_ACTIVE state? While if it's been suspended that's not the case meaning rpm_resume would fail?
If we have a window for a race there with RPM_ACTIVE set, we could add musb->is_disabled flag that gets set in musb_suspend().
Quoted 5 lines
Quoted 2 lines
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?
Hmm care to explain a bit more? That is assuming that rpm_resume() won't fail above.. And that using musb->is_disabled flag won't work..
Quoted 24 lines
Quoted 16 lines
Quoted 4 lines
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else {Quoted 8 lines
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2093
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ;But this means you should be able to run the callback below, right? It has to be run from somewhere so otherwise the caller needs to retry instead.
Well there's no longer need to run the callback at that point any longer and with that removed that should not be an issue.
Quoted 7 lines
Anyways,
musb->is_runtime_suspendedis needed to protect anything from being queued between runtime resume having calledmusb_run_resume_work()and beforepm_runtime_active()is true. At that point the caller could just wait forpm_runtime_active()to be set and run the code. But based on my tests that does not happen and queueing is faster than getting to thepm_runtime_active()state so we just print errors in those cases if we ever hit it later on.
Quoted 3 lines
But for a generic solution, this race could still be an issue. What about
musb_gadget_queue()for example? Would not failing to start I/O if racing with resume be a problem?
It's probably safest to return an error for cases like that rather than attempt to do something and risk corrupting packets. I'll move the check to happen earlier musb_gadget_queue() so we don't do anything with the request if pm_runtime_get() fails there. That should make it easy to add further handling if we ever start really hitting that issue.
Quoted 5 lines
Quoted 2 lines
Sounds like the rest of your comments are no longer an issue, please let me know if that's not the case.
I think the barrier comment for the
WARN_ONonmusb_runtime_suspend()still applies.
OK, will remove that like you suggested.
Quoted 8 lines
drivers/usb/musb/musb_gadget.c static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, · line 1267
Quoted 6 lines
drivers/usb/musb/musb_gadget.c +1
-1@@ -1255,7 +1264,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller); +pm_runtime_get (musb->controller);Add the missing error handling here too?
Will do and move it earlier to bail out before doing anything with the request.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 7 lines · Tony Lindgren
Quoted 2 lines · Johan Hovold
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?Hmm care to explain a bit more? That is assuming that
rpm_resume()won't fail above.. And that usingmusb->is_disabledflag won't work..
Oh you're talking about musb_enable/disable ops, not the pm_runtime/enable/disable ops :)
Yeah that might work for disabling the dsps specific timer.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 11 lines · Tony Lindgren
Quoted 7 lines · Tony Lindgren
Quoted 2 lines · Johan Hovold
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?Hmm care to explain a bit more? That is assuming that
rpm_resume()won't fail above.. And that usingmusb->is_disabledflag won't work..Oh you're talking about musb_enable/disable ops, not the pm_runtime/enable/disable ops :)
Indeed, sorry for being unclear.
Quoted 1 line
Yeah that might work for disabling the dsps specific timer.
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
In reply to a message not in the archiveQuoted 57 lines · Tony Lindgren
Quoted 56 lines · Johan Hovold
Quoted 45 lines · Tony Lindgren
Quoted 44 lines · Johan Hovold
Quoted 11 lines · Tony Lindgren
Quoted 10 lines · Johan Hovold
Quoted 8 lines · Tony Lindgren
Quoted 4 lines · Johan Hovold
In fact, the dsps timer must also be cancelled on suspend, or you could end up calling
dsps_check_status()while suspended (it is currently not cancelled until the parent device is suspended, which could be too late).And then this should no longer be an issue either.
Quoted 8 lines
Quoted 3 lines
It would still be an issue as a system-suspending device could already have been runtime-resumed so that
dsps_check_status()would be called directly from the timer function.The glue layers should do
pm_runtime_get_sync(musb->controller)which dsps glue already does. So that's themusb_core.cdevice instance. And looks like we havedsps_suspend()calldel_timer_sync(&glue->timer)already. I think we're safe here.But the point is that the controller might be
RPM_ACTIVEif the controller was already runtime resumed when it is system suspended.Since this (and the previous) patch run the work directly from the timer callback if active, it could end up accessing the controller after it has been system suspended. Specifically, stopping the timer in the glue (parent) suspend callback is too late to avoid this.
pm_runtime_get_sync(musb->controller); musb_runtime_resume() musb_restore_context(); ... musb_suspend() musb_save_context(); otg_timer() pm_runtime_get(); if (pm_runtime_active(musb->controller)) dsps_check_status(); pm_runtime_put_autosuspend();Quoted 6 lines
Quoted 3 lines
dsps_suspend() del_timer_sync();OK so we need to return without doing anything from
otg_timer()onpm_runtime_get()to avoid that.I'm afraid that won't work as
pm_runtime_get()would still succeed (i.e. even aftermusb_suspend()).
Quoted 6 lines
Quoted 2 lines
See
6f3c77b040fc("PM / Runtime: letrpm_resume()succeed ifRPM_ACTIVE, even when disabled, v2").But doesn't that assume that we have musb core as in
musb->controllerinRPM_ACTIVEstate? While if it's been suspended that's not the case meaningrpm_resumewould fail?
Right, and it's still a good idea to check the return value of pm_runtime_get(). It just won't be enough for when RPM_ACTIVE.
Quoted 2 lines
If we have a window for a race there with
RPM_ACTIVEset, we could addmusb->is_disabledflag that gets set inmusb_suspend().
Yes.
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?Hmm care to explain a bit more? That is assuming that
rpm_resume()won't fail above.. And that usingmusb->is_disabledflag won't work..
By stopping the timer in musb->ops->disable which is called during suspend, the race could perhaps also be avoided.
Quoted 28 lines
Quoted 24 lines
Quoted 16 lines
Quoted 4 lines
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else {Quoted 8 lines
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2093
Quoted 4 lines
drivers/usb/musb/musb_core.c +4
-0+dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ;But this means you should be able to run the callback below, right? It has to be run from somewhere so otherwise the caller needs to retry instead.
Well there's no longer need to run the callback at that point any longer and with that removed that should not be an issue.
Quoted 7 lines
Anyways,
musb->is_runtime_suspendedis needed to protect anything from being queued between runtime resume having calledmusb_run_resume_work()and beforepm_runtime_active()is true. At that point the caller could just wait forpm_runtime_active()to be set and run the code. But based on my tests that does not happen and queueing is faster than getting to thepm_runtime_active()state so we just print errors in those cases if we ever hit it later on.Quoted 3 lines
But for a generic solution, this race could still be an issue. What about
musb_gadget_queue()for example? Would not failing to start I/O if racing with resume be a problem?
Quoted 6 lines
It's probably safest to return an error for cases like that rather than attempt to do something and risk corrupting packets. I'll move the check to happen earlier
musb_gadget_queue()so we don't do anything with the request ifpm_runtime_get()fails there. That should make it easy to add further handling if we ever start really hitting that issue.
Ok.
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 26 lines · Johan Hovold
Quoted 10 lines · Tony Lindgren
Quoted 5 lines · Johan Hovold
I'm afraid that won't work as
pm_runtime_get()would still succeed (i.e. even aftermusb_suspend()).See
6f3c77b040fc("PM / Runtime: letrpm_resume()succeed ifRPM_ACTIVE, even when disabled, v2").But doesn't that assume that we have musb core as in
musb->controllerinRPM_ACTIVEstate? While if it's been suspended that's not the case meaningrpm_resumewould fail?Right, and it's still a good idea to check the return value of
pm_runtime_get(). It just won't be enough for whenRPM_ACTIVE.Quoted 2 lines
If we have a window for a race there with
RPM_ACTIVEset, we could addmusb->is_disabledflag that gets set inmusb_suspend().Yes.
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?
Quoted 6 lines
Quoted 3 lines
Hmm care to explain a bit more? That is assuming that
rpm_resume()won't fail above.. And that usingmusb->is_disabledflag won't work..By stopping the timer in
musb->ops->disablewhich is called during suspend, the race could perhaps also be avoided.
Yes I think that's the way to go here :) Updated version below again.
Regards,
Tony
8< --------------------------
Quoted 1 line
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glue
Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer that runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled. And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake, and we need to make sure the DSPS glue
timer is stopped as noted by Johan Hovold <[email protected]>.
Later on we may be able to remove other delayed work in the musb driver and just do it from pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
glue layer")
--- drivers/usb/musb/musb_core.c | 110 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 35 +++++++++---- drivers/usb/musb/musb_gadget.c | 32 ++++++++++-- 4 files changed, 166 insertions(+), 18 deletions(-)
drivers/usb/musb/musb_core.c +106 -4
@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;
@@ -2018,6 +2019,85 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock and must hold +* an RPM reference. +*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node); +devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock. +* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
@@ -2065,6 +2145,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
@@ -2558,6 +2639,7 @@ static int musb_suspend(struct device *dev)musb_platform_disable (musb);musb_generic_disable (musb); +WARN_ON (!list_empty (&musb->pending_list));spin_lock_irqsave (&musb->lock, flags);
@@ -2579,9 +2661,11 @@ static int musb_suspend(struct device *dev)static int musb_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); -u8 devctl; -u8 mask; +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error; +u8 devctl; +u8 mask;/* * For static cmos like DaVinci, register values were preserved
@@ -2615,6 +2699,13 @@ static int musb_resume(struct device *dev)musb_start (musb); +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
@@ -2623,13 +2714,16 @@ static int musb_runtime_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);musb_save_context (musb); + musb->is_runtime_suspended =1 ;return 0 ; }static int musb_runtime_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error;/* * When pm_runtime_get_sync called for the first time in driver
@@ -2651,6 +2745,14 @@ static int musb_runtime_resume(struct device *dev) msecs_to_jiffies(USB_RESUME_TIMEOUT)); } +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); + musb->is_runtime_suspended =0 ; +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
drivers/usb/musb/musb_core.h +7 -0
@@ -303,6 +303,7 @@ struct musb_context_registers {struct musb {/* device lock */ spinlock_t lock; +spinlock_t list_lock;/* resume work list lock */ struct musb_io io;const struct musb_platform_ops *ops;
@@ -337,6 +338,7 @@ struct musb {struct list_head control;/* of musb_qh */ struct list_head in_bulk;/* of musb_qh */ struct list_head out_bulk;/* of musb_qh */ +struct list_head pending_list;/* pending work list */ struct timer_list otg_timer;struct notifier_block nb;
@@ -386,6 +388,7 @@ struct musb {unsigned long idle_timeout;/* Next timeout in jiffies */ unsigned is_initialized:1; + unsigned is_runtime_suspended:1;/* active means connected and not suspended */ unsigned is_active:1;
@@ -542,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);extern void musb_hnp_stop (struct musb *musb); +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data); +static inline void musb_platform_set_vbus (struct musb *musb,int is_on) {if (musb->ops->set_vbus)
drivers/usb/musb/musb_dsps.c +25 -10
@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)musb_writel (reg_base, wrp->coreintr_clear, wrp->usb_bitmap);musb_writel (reg_base, wrp->epintr_clear, wrp->txep_bitmap | wrp->rxep_bitmap); +del_timer_sync (&glue->timer);musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +/* Caller must take musb->lock */ +static int dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);const struct dsps_musb_wrapper *wrp = glue->wrp;u8 devctl; -unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +207,6 @@ static void otg_timer(unsigned long _musb)dev_dbg (musb->controller,"Poll devctl %02x (%s)\n" , devctl,usb_otg_state_string (musb->xceiv->otg->state)); -spin_lock_irqsave (&musb->lock, flags);switch (musb->xceiv->otg->state) {case OTG_STATE_A_WAIT_VRISE : mod_timer(&glue->timer, jiffies +
@@ -245,8 +239,29 @@ static void otg_timer(unsigned long _musb)default :break ; } -spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; +} + +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if ((err != -EINPROGRESS ) && err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); + +return ; + } + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }
drivers/usb/musb/musb_gadget.c +28 -4
@@ -1222,13 +1222,22 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {struct musb_ep *musb_ep;struct musb_request *request;struct musb *musb; -int status =0 ; +int status;unsigned long lockflags;if (!ep || !req)
@@ -1245,6 +1254,16 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,if (request->ep != musb_ep)return -EINVAL ; + status =pm_runtime_get (musb->controller); +if ((status != -EINPROGRESS ) && status <0 ) { +dev_err (musb->controller, +"pm runtime get failed in %s\n" , + __func__); + +return status; + } + status =0 ; +trace_musb_req_enq (request);/* request is mine now... */
@@ -1255,7 +1274,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller);spin_lock_irqsave (&musb->lock, lockflags);/* don't queue if the ep is down */
@@ -1271,8 +1289,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,list_add_tail (&request->list, &musb_ep->req_list);/* it this is the head of the queue, start i/o ... */ -if (!musb_ep->busy && &request->list == musb_ep->req_list.next) -musb_ep_restart (musb, request); +if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { + status =musb_queue_resume_work (musb, + musb_ep_restart_resume_work, + request); +if (status <0 ) +dev_err (musb->controller,"%s resume work: %i\n" , + __func__, status); + } unlock:spin_unlock_irqrestore (&musb->lock, lockflags);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 99 lines · Tony Lindgren
Quoted 26 lines · Johan Hovold
Quoted 10 lines · Tony Lindgren
Quoted 5 lines · Johan Hovold
I'm afraid that won't work as
pm_runtime_get()would still succeed (i.e. even aftermusb_suspend()).See
6f3c77b040fc("PM / Runtime: letrpm_resume()succeed ifRPM_ACTIVE, even when disabled, v2").But doesn't that assume that we have musb core as in
musb->controllerinRPM_ACTIVEstate? While if it's been suspended that's not the case meaningrpm_resumewould fail?Right, and it's still a good idea to check the return value of
pm_runtime_get(). It just won't be enough for whenRPM_ACTIVE.Quoted 2 lines
If we have a window for a race there with
RPM_ACTIVEset, we could addmusb->is_disabledflag that gets set inmusb_suspend().Yes.
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
In the long run it would be nice to make whatever optional state polling musb generic with just a glue layer callback.
Yes, and make sure to stop polling in
musb_suspend(). Would it be possible to use the enable and disable ops for this until then?Quoted 6 lines
Quoted 3 lines
Hmm care to explain a bit more? That is assuming that
rpm_resume()won't fail above.. And that usingmusb->is_disabledflag won't work..By stopping the timer in
musb->ops->disablewhich is called during suspend, the race could perhaps also be avoided.Yes I think that's the way to go here :) Updated version below again.
Regards,
Tony
8< --------------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glueCommit
65b3f50ed6fa("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call forpm_runtime_get_synctootg_timerthat runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:[<
c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)I did not notice that as I did not have
CONFIG_DEBUG_ATOMIC_SLEEPenabled. And looks like alsomusb_gadget_queue()suffers from the same problem.Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake, and we need to make sure the DSPS glue
timer is stopped as noted by Johan Hovold <[email protected]>.Later on we may be able to remove other delayed work in the musb driver and just do it from
pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- drivers/usb/musb/musb_core.c | 110 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 35 +++++++++---- drivers/usb/musb/musb_gadget.c | 32 ++++++++++-- 4 files changed, 166 insertions(+), 18 deletions(-)drivers/usb/musb/musb_core.c +1
-0@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;@@ -2018,6 +2019,85 @@ static void musb_free(struct musb *musb)musb_host_free (musb); }
drivers/usb/musb/musb_core.c static void musb_free(struct musb *musb) · line 2031
Quoted 10 lines
drivers/usb/musb/musb_core.c +10
-0+struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock and must hold +* an RPM reference.
The RPM reference is needed for musb_queue_resume_work() below, not this one.
Quoted 77 lines
drivers/usb/musb/musb_core.c +69
-0+*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node); +devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock. +* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
drivers/usb/musb/musb_dsps.c static void dsps_musb_disable(struct musb *musb) · line 188
Quoted 4 lines
drivers/usb/musb/musb_dsps.c +1
-0@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)musb_writel (reg_base, wrp->coreintr_clear, wrp->usb_bitmap);musb_writel (reg_base, wrp->epintr_clear, wrp->txep_bitmap | wrp->rxep_bitmap); +del_timer_sync (&glue->timer);
Don't you want to move starting the timer to dsps_musb_enable() as well?
Quoted 41 lines
drivers/usb/musb/musb_dsps.c +6
-10musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +/* Caller must take musb->lock */ +static int dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);const struct dsps_musb_wrapper *wrp = glue->wrp;u8 devctl; -unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical @@ -212,7 +207,6 @@ static void otg_timer(unsigned long _musb)dev_dbg (musb->controller,"Poll devctl %02x (%s)\n" , devctl,usb_otg_state_string (musb->xceiv->otg->state)); -spin_lock_irqsave (&musb->lock, flags);switch (musb->xceiv->otg->state) {case OTG_STATE_A_WAIT_VRISE : mod_timer(&glue->timer, jiffies +@@ -245,8 +239,29 @@ static void otg_timer(unsigned long _musb)default :break ; } -spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; +} + +static void otg_timer (unsigned long _musb)
drivers/usb/musb/musb_dsps.c static void otg_timer(unsigned long _musb) · line 256
Quoted 10 lines
drivers/usb/musb/musb_dsps.c +10
-0+{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if ((err != -EINPROGRESS ) && err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); +
Add pm_runtime_put_noidle() to balance the counter also on errors.
Quoted 39 lines
drivers/usb/musb/musb_dsps.c +8
-0+return ; + } + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }drivers/usb/musb/musb_gadget.c +10
-1@@ -1222,13 +1222,22 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {struct musb_ep *musb_ep;struct musb_request *request;struct musb *musb; -int status =0 ; +int status;unsigned long lockflags;if (!ep || !req)
drivers/usb/musb/musb_gadget.c static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, · line 1261
Quoted 8 lines
drivers/usb/musb/musb_gadget.c +5
-0@@ -1245,6 +1254,16 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,if (request->ep != musb_ep)return -EINVAL ; + status =pm_runtime_get (musb->controller); +if ((status != -EINPROGRESS ) && status <0 ) { +dev_err (musb->controller, +"pm runtime get failed in %s\n" , + __func__);
Missing pm_runtime_put_noidle() here too.
drivers/usb/musb/musb_gadget.c static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, · line 1266
Quoted 5 lines
drivers/usb/musb/musb_gadget.c +5
-0+ +return status; + } + status =0 ; +
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 7 lines · Johan Hovold
Quoted 3 lines · Tony Lindgren
+ * Called from
musb_runtime_resume(),musb_resume(), and
+ *musb_queue_resume_work(). Callers must takemusb->lockand must hold
+ * an RPM reference.The RPM reference is needed for
musb_queue_resume_work()below, not this one.
Indeed thanks for catching that.
Quoted 9 lines
drivers/usb/musb/musb_dsps.c static void dsps_musb_disable(struct musb *musb) · line 188
Quoted 7 lines
drivers/usb/musb/musb_dsps.c +1
-0@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)musb_writel (reg_base, wrp->coreintr_clear, wrp->usb_bitmap);musb_writel (reg_base, wrp->epintr_clear, wrp->txep_bitmap | wrp->rxep_bitmap); +del_timer_sync (&glue->timer);Don't you want to move starting the timer to
dsps_musb_enable()as well?
Looks like we already have mod_timer() being called in dsps_musb_enable(), I'll mention that in the patch description.
Quoted 6 lines
drivers/usb/musb/musb_dsps.c static void dsps_musb_disable(struct musb *musb) · line 192
Quoted 4 lines
drivers/usb/musb/musb_dsps.c +4
-0+ err =pm_runtime_get (dev); +if ((err != -EINPROGRESS ) && err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); +Add
pm_runtime_put_noidle()to balance the counter also on errors.
Right.. We're now returning early, adding it to both places.
Updated patch below.
Regards,
Tony
8< ------------------------
Quoted 1 line
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glue
Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer that runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled. And looks like also musb_gadget_queue() suffers from the same problem.
Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake, and we need to make sure the DSPS glue
timer is stopped as noted by Johan Hovold <[email protected]>. Note that we already are re-enabling the timer with mod_timer() in dsps_musb_enable().
Later on we may be able to remove other delayed work in the musb driver and just do it from pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
glue layer")
--- drivers/usb/musb/musb_core.c | 109 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/musb/musb_core.h | 7 +++ drivers/usb/musb/musb_dsps.c | 36 ++++++++++---- drivers/usb/musb/musb_gadget.c | 33 +++++++++++-- 4 files changed, 167 insertions(+), 18 deletions(-)
drivers/usb/musb/musb_core.c +105 -4
@@ -1969,6 +1969,7 @@ static struct musb *allocate_instance(struct device *dev,INIT_LIST_HEAD (&musb->control);INIT_LIST_HEAD (&musb->in_bulk);INIT_LIST_HEAD (&musb->out_bulk); +INIT_LIST_HEAD (&musb->pending_list); musb->vbuserr_retry =VBUSERR_RETRY_COUNT ; musb->a_wait_bcon =OTG_TIME_A_WAIT_BCON ;
@@ -2018,6 +2019,84 @@ static void musb_free(struct musb *musb)musb_host_free (musb); } +struct musb_pending_work { +int (*callback)(struct musb *musb,void *data); +void *data; +struct list_head node; +}; + +/* +* Called from musb_runtime_resume(), musb_resume(), and +* musb_queue_resume_work(). Callers must take musb->lock. +*/ +static int musb_run_resume_work (struct musb *musb) +{ +struct musb_pending_work *w, *_w; +unsigned long flags; +int error =0 ; + +spin_lock_irqsave (&musb->list_lock, flags); +list_for_each_entry_safe (w, _w, &musb->pending_list, node) { +if (w->callback) { + error = w->callback (musb, w->data); +if (error <0 ) { +dev_err (musb->controller, +"resume callback %p failed: %i\n" , + w->callback, error); + } + } +list_del (&w->node); +devm_kfree (musb->controller, w); + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} + +/* +* Called to run work if device is active or else queue the work to happen +* on resume. Caller must take musb->lock and must hold an RPM reference. +* +* Note that we cowardly refuse queuing work after musb PM runtime +* resume is done calling musb_run_resume_work() and return -EINPROGRESS +* instead. +*/ +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data) +{ +struct musb_pending_work *w; +unsigned long flags; +int error; + +if (WARN_ON (!callback)) +return -EINVAL ; + +if (pm_runtime_active (musb->controller)) +return callback (musb, data); + + w =devm_kzalloc (musb->controller,sizeof (*w),GFP_ATOMIC ); +if (!w) +return -ENOMEM ; + + w->callback = callback; + w->data = data; +spin_lock_irqsave (&musb->list_lock, flags); +if (musb->is_runtime_suspended) { +list_add_tail (&w->node, &musb->pending_list); + error =0 ; + }else { +dev_err (musb->controller,"could not add resume work %p\n" , + callback); +devm_kfree (musb->controller, w); + error = -EINPROGRESS ; + } +spin_unlock_irqrestore (&musb->list_lock, flags); + +return error; +} +EXPORT_SYMBOL_GPL (musb_queue_resume_work); +static void musb_deassert_reset (struct work_struct *work) {struct musb *musb;
@@ -2065,6 +2144,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) }spin_lock_init (&musb->lock); +spin_lock_init (&musb->list_lock); musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops;
@@ -2558,6 +2638,7 @@ static int musb_suspend(struct device *dev)musb_platform_disable (musb);musb_generic_disable (musb); +WARN_ON (!list_empty (&musb->pending_list));spin_lock_irqsave (&musb->lock, flags);
@@ -2579,9 +2660,11 @@ static int musb_suspend(struct device *dev)static int musb_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); -u8 devctl; -u8 mask; +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error; +u8 devctl; +u8 mask;/* * For static cmos like DaVinci, register values were preserved
@@ -2615,6 +2698,13 @@ static int musb_resume(struct device *dev)musb_start (musb); +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
@@ -2623,13 +2713,16 @@ static int musb_runtime_suspend(struct device *dev)struct musb *musb =dev_to_musb (dev);musb_save_context (musb); + musb->is_runtime_suspended =1 ;return 0 ; }static int musb_runtime_resume (struct device *dev) { -struct musb *musb =dev_to_musb (dev); +struct musb *musb =dev_to_musb (dev); +unsigned long flags; +int error;/* * When pm_runtime_get_sync called for the first time in driver
@@ -2651,6 +2744,14 @@ static int musb_runtime_resume(struct device *dev) msecs_to_jiffies(USB_RESUME_TIMEOUT)); } +spin_lock_irqsave (&musb->lock, flags); + error =musb_run_resume_work (musb); +if (error) +dev_err (musb->controller,"resume work failed with %i\n" , + error); + musb->is_runtime_suspended =0 ; +spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; }
drivers/usb/musb/musb_core.h +7 -0
@@ -303,6 +303,7 @@ struct musb_context_registers {struct musb {/* device lock */ spinlock_t lock; +spinlock_t list_lock;/* resume work list lock */ struct musb_io io;const struct musb_platform_ops *ops;
@@ -337,6 +338,7 @@ struct musb {struct list_head control;/* of musb_qh */ struct list_head in_bulk;/* of musb_qh */ struct list_head out_bulk;/* of musb_qh */ +struct list_head pending_list;/* pending work list */ struct timer_list otg_timer;struct notifier_block nb;
@@ -386,6 +388,7 @@ struct musb {unsigned long idle_timeout;/* Next timeout in jiffies */ unsigned is_initialized:1; + unsigned is_runtime_suspended:1;/* active means connected and not suspended */ unsigned is_active:1;
@@ -542,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);extern void musb_hnp_stop (struct musb *musb); +int musb_queue_resume_work (struct musb *musb, +int (*callback)(struct musb *musb,void *data), +void *data); +static inline void musb_platform_set_vbus (struct musb *musb,int is_on) {if (musb->ops->set_vbus)
drivers/usb/musb/musb_dsps.c +26 -10
@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)musb_writel (reg_base, wrp->coreintr_clear, wrp->usb_bitmap);musb_writel (reg_base, wrp->epintr_clear, wrp->txep_bitmap | wrp->rxep_bitmap); +del_timer_sync (&glue->timer);musb_writeb (musb->mregs,MUSB_DEVCTL ,0 ); } -static void otg_timer (unsigned long _musb) +/* Caller must take musb->lock */ +static int dsps_check_status (struct musb *musb,void *unused) { -struct musb *musb = (void *)_musb;void __iomem *mregs = musb->mregs;struct device *dev = musb->controller;struct dsps_glue *glue =dev_get_drvdata (dev->parent);const struct dsps_musb_wrapper *wrp = glue->wrp;u8 devctl; -unsigned long flags;int skip_session =0 ; -int err; - - err =pm_runtime_get_sync (dev); -if (err <0 ) -dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err);/* * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +207,6 @@ static void otg_timer(unsigned long _musb)dev_dbg (musb->controller,"Poll devctl %02x (%s)\n" , devctl,usb_otg_state_string (musb->xceiv->otg->state)); -spin_lock_irqsave (&musb->lock, flags);switch (musb->xceiv->otg->state) {case OTG_STATE_A_WAIT_VRISE : mod_timer(&glue->timer, jiffies +
@@ -245,8 +239,30 @@ static void otg_timer(unsigned long _musb)default :break ; } -spin_unlock_irqrestore (&musb->lock, flags); +return 0 ; +} + +static void otg_timer (unsigned long _musb) +{ +struct musb *musb = (void *)_musb; +struct device *dev = musb->controller; +unsigned long flags; +int err; + + err =pm_runtime_get (dev); +if ((err != -EINPROGRESS ) && err <0 ) { +dev_err (dev,"Poll could not pm_runtime_get: %i\n" , err); +pm_runtime_put_noidle (dev); + +return ; + } + +spin_lock_irqsave (&musb->lock, flags); + err =musb_queue_resume_work (musb, dsps_check_status,NULL ); +if (err <0 ) +dev_err (dev,"%s resume work: %i\n" , __func__, err); +spin_unlock_irqrestore (&musb->lock, flags);pm_runtime_mark_last_busy (dev);pm_runtime_put_autosuspend (dev); }
drivers/usb/musb/musb_gadget.c +29 -4
@@ -1222,13 +1222,22 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)rxstate (musb, req); } +static int musb_ep_restart_resume_work (struct musb *musb,void *data) +{ +struct musb_request *req = data; + +musb_ep_restart (musb, req); + +return 0 ; +} +static int musb_gadget_queue (struct usb_ep *ep,struct usb_request *req,gfp_t gfp_flags) {struct musb_ep *musb_ep;struct musb_request *request;struct musb *musb; -int status =0 ; +int status;unsigned long lockflags;if (!ep || !req)
@@ -1245,6 +1254,17 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,if (request->ep != musb_ep)return -EINVAL ; + status =pm_runtime_get (musb->controller); +if ((status != -EINPROGRESS ) && status <0 ) { +dev_err (musb->controller, +"pm runtime get failed in %s\n" , + __func__); +pm_runtime_put_noidle (musb->controller); + +return status; + } + status =0 ; +trace_musb_req_enq (request);/* request is mine now... */
@@ -1255,7 +1275,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,map_dma_buffer (request, musb, musb_ep); -pm_runtime_get_sync (musb->controller);spin_lock_irqsave (&musb->lock, lockflags);/* don't queue if the ep is down */
@@ -1271,8 +1290,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,list_add_tail (&request->list, &musb_ep->req_list);/* it this is the head of the queue, start i/o ... */ -if (!musb_ep->busy && &request->list == musb_ep->req_list.next) -musb_ep_restart (musb, request); +if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { + status =musb_queue_resume_work (musb, + musb_ep_restart_resume_work, + request); +if (status <0 ) +dev_err (musb->controller,"%s resume work: %i\n" , + __func__, status); + } unlock:spin_unlock_irqrestore (&musb->lock, lockflags);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Johan Hovold
Reviewed-byRe: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 36 lines · Tony Lindgren
Quoted 1 line · Johan Hovold
On Thu, Nov 10, 2016 at 12:40:03PM -0700, Tony Lindgren wrote:
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 2 Nov 2016 19:59:05 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glueCommit
65b3f50ed6fa("usb: musb: Add PM runtime support for MUSB DSPS glue layer") wrongly added a call forpm_runtime_get_synctootg_timerthat runs in softirq context. That causes a "BUG: sleeping function called from invalid context" every time when polling the cable status:[<
c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0) [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254) [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c) [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210) [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc) [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)I did not notice that as I did not have
CONFIG_DEBUG_ATOMIC_SLEEPenabled. And looks like alsomusb_gadget_queue()suffers from the same problem.Let's fix the issue by using a list of delayed work then call it on
resume. Note that we want to do this only when musb core and it's
parent devices are awake, and we need to make sure the DSPS glue
timer is stopped as noted by Johan Hovold <[email protected]>. Note that we already are re-enabling the timer withmod_timer()indsps_musb_enable().Later on we may be able to remove other delayed work in the musb driver and just do it from
pending_resume_work. But this should be done only for delayed work that does not have other timing requirements beyond just being run on resume.
Quoted 4 lines
Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Looks good to me now. Feel free to add
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
Quoted 9 lines · Johan Hovold
Quoted 4 lines · Tony Lindgren
Fixes 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPSglue layer")
Reported-by Johan Hovold <[email protected]>Signed-off-by Tony Lindgren <[email protected]>Looks good to me now. Feel free to add
Reviewed-by Johan Hovold <[email protected]>
Thanks a lot for all your numerous reviews :) I'll repost the whole series again a bit later today.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 3/4 usb: musb: Fix PM for hub disconnect
In reply to a message not in the archiveWith a USB hub disconnected, devctl can be 0x19 for about a second on am335x and will stay forever on at least omap3. And we get no further interrupts when devctl session bit clears. This keeps PM runtime active.
Let's fix the issue by polling devctl until the session bit clears or times out. We can do this by making musb->irq_work into delayed_work.
And with the polling implemented, we can now also have the quirk for invalid VBUS it to avoid disconnecting too early while VBUS is ramping up.
PM for musb-core")
--- drivers/usb/musb/musb_core.c | 29 +++++++++++++++++++---------- drivers/usb/musb/musb_core.h | 4 ++-- drivers/usb/musb/musb_gadget.c | 6 +++--- drivers/usb/musb/tusb6010.c | 6 +++--- 4 files changed, 27 insertions(+), 18 deletions(-)
drivers/usb/musb/musb_core.c +19 -10
@@ -986,7 +986,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, }#endif -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 );return handled; }
@@ -1855,14 +1855,23 @@ static void musb_pm_runtime_check_session(struct musb *musb)MUSB_DEVCTL_HR ;switch (devctl & ~s) {case MUSB_QUIRK_B_INVALID_VBUS_91 : -if (!musb->session && !musb->quirk_invalid_vbus) { - musb->quirk_invalid_vbus = true; +if (musb->quirk_retries--) {musb_dbg (musb, -"First invalid vbus, assume no session" ); +"Poll devctl on invalid vbus, assume no session" ); +schedule_delayed_work (&musb->irq_work, +msecs_to_jiffies (1000 )); +return ; } -break ;case MUSB_QUIRK_A_DISCONNECT_19 : +if (musb->quirk_retries--) { +musb_dbg (musb, +"Poll devctl on possible host mode disconnect" ); +schedule_delayed_work (&musb->irq_work, +msecs_to_jiffies (1000 )); + +return ; + }if (!musb->session)break ;musb_dbg (musb,"Allow PM on possible host mode disconnect" );
@@ -1886,9 +1895,9 @@ static void musb_pm_runtime_check_session(struct musb *musb)if (error <0 )dev_err (musb->controller,"Could not enable: %i\n" , error); + musb->quirk_retries =3 ; }else {musb_dbg (musb,"Allow PM with no session: %02x" , devctl); - musb->quirk_invalid_vbus = false;pm_runtime_mark_last_busy (musb->controller);pm_runtime_put_autosuspend (musb->controller); }
@@ -1899,7 +1908,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)/* Only used to provide driver mode change events */ static void musb_irq_work (struct work_struct *data) { - struct musb *musb = container_of(data, struct musb, irq_work); + struct musb *musb = container_of(data, struct musb, irq_work.work);musb_pm_runtime_check_session (musb);
@@ -2275,7 +2284,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)musb_generic_disable (musb);/* Init IRQ workqueue before request_irq */ -INIT_WORK (&musb->irq_work, musb_irq_work); +INIT_DELAYED_WORK (&musb->irq_work, musb_irq_work);INIT_DELAYED_WORK (&musb->deassert_reset_work, musb_deassert_reset);INIT_DELAYED_WORK (&musb->pending_resume_work, musb_pending_work);INIT_DELAYED_WORK (&musb->finish_resume_work, musb_host_finish_resume);
@@ -2373,7 +2382,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)musb_host_cleanup (musb); fail3: -cancel_work_sync (&musb->irq_work); +cancel_delayed_work_sync (&musb->irq_work);cancel_delayed_work_sync (&musb->finish_resume_work);cancel_delayed_work_sync (&musb->pending_resume_work);cancel_delayed_work_sync (&musb->deassert_reset_work);
@@ -2441,7 +2450,7 @@ static int musb_remove(struct platform_device *pdev)*/ musb_exit_debugfs (musb); -cancel_work_sync (&musb->irq_work); +cancel_delayed_work_sync (&musb->irq_work);cancel_delayed_work_sync (&musb->finish_resume_work);cancel_delayed_work_sync (&musb->pending_resume_work);cancel_delayed_work_sync (&musb->deassert_reset_work);
drivers/usb/musb/musb_core.h +2 -2
@@ -310,7 +310,7 @@ struct musb {struct musb_context_registers context;irqreturn_t (*isr)(int ,void *); -struct work_struct irq_work; +struct delayed_work irq_work;struct delayed_work deassert_reset_work;struct delayed_work pending_resume_work;struct delayed_work finish_resume_work;
@@ -382,7 +382,7 @@ struct musb {int port_mode;/* MUSB_PORT_MODE_* */ bool session; -bool quirk_invalid_vbus; +unsigned long quirk_retries;bool is_host;int a_wait_bcon;/* VBUS timeout in msecs */
drivers/usb/musb/musb_gadget.c +3 -3
@@ -1114,7 +1114,7 @@ static int musb_gadget_enable(struct usb_ep *ep, musb_ep->dma ?"dma, " :"" , musb_ep->packet_sz); -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 ); fail:spin_unlock_irqrestore (&musb->lock, flags);
@@ -1158,7 +1158,7 @@ static int musb_gadget_disable(struct usb_ep *ep) musb_ep->desc =NULL ; musb_ep->end_point.desc =NULL ; -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 );spin_unlock_irqrestore (&(musb->lock), flags);
@@ -1985,7 +1985,7 @@ static int musb_gadget_stop(struct usb_gadget *g)*/ /* Force check of devctl register for PM runtime */ -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 );pm_runtime_mark_last_busy (musb->controller);pm_runtime_put_autosuspend (musb->controller);
drivers/usb/musb/tusb6010.c +3 -3
@@ -724,7 +724,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)dev_dbg (musb->controller,"vbus change, %s, otg %03x\n" ,usb_otg_state_string (musb->xceiv->otg->state), otg_stat); idle_timeout = jiffies + (1 *HZ ); -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 ); }else /* A-dev state machine */ { dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
@@ -814,7 +814,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)break ; } } -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 );return idle_timeout; }
@@ -864,7 +864,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)musb_writel (tbase,TUSB_PRCM_WAKEUP_CLEAR , reg);if (reg & ~TUSB_PRCM_WNORCS ) { musb->is_active =1 ; -schedule_work (&musb->irq_work); +schedule_delayed_work (&musb->irq_work,0 ); }dev_dbg (musb->controller,"wake %sactive %02x\n" , musb->is_active ?"" :"in" , reg);
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 4/4 phy: twl4030-usb: Fix for musb session bit based PM
In reply to a message not in the archiveNow with musb driver implementing generic session bit based PM, we need to have the USB PHYs behaving in a sane way for platforms implementing PM.
Currently twl4030-usb enables PM in twl4030_phy_power_on() and then disables it in twl4030_phy_power_off(). This will block PM runtime for the SoC when no cable is connected.
Fix the issue by moving PM runtime autosuspend call to happen where it gets called in twl4030_phy_power_on().
Note that this patch should not be backported to anything before commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") as before that all the glue layers implemented their own PM.
runtime PM for musb-core")
--- drivers/phy/phy-twl4030-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/phy/phy-twl4030-usb.c +2 -2
@@ -459,8 +459,6 @@ static int twl4030_phy_power_off(struct phy *phy)struct twl4030_usb *twl =phy_get_drvdata (phy);dev_dbg (twl->dev,"%s\n" , __func__); -pm_runtime_mark_last_busy (twl->dev); -pm_runtime_put_autosuspend (twl->dev);return 0 ; }
@@ -472,6 +470,8 @@ static int twl4030_phy_power_on(struct phy *phy)dev_dbg (twl->dev,"%s\n" , __func__);pm_runtime_get_sync (twl->dev);schedule_delayed_work (&twl->id_workaround_work,HZ ); +pm_runtime_mark_last_busy (twl->dev); +pm_runtime_put_autosuspend (twl->dev);return 0 ; }
Signature · 5 lines
2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Ladislav Michl
Tested-byHi Tony,
Quoted 5 lines · Tony Lindgren
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
I still need 87326e858448c40e32f142c0b8dcc59d7b27c641 (usb: musb: Remove extra PM runtime calls from 2430 glue layer) reverted, but I'm happy with that solution so far.
Quoted 2 lines
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Yes please!
Quoted 2 lines
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
tested on IGEPv2 with v4.9-rc4, so here's my
Best regards,
ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161108133821.GA1855-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 5 lines · Ladislav Michl
Hi Tony,
Quoted 2 lines · Tony Lindgren
Hi all,
Quoted 7 lines
Quoted 3 lines
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
I still need
87326e858448c40e32f142c0b8dcc59d7b27c641(usb: musb: Remove extra PM runtime calls from 2430 glue layer) reverted, but I'm happy with that solution so far.
Weird, I have not figured out what happens there..
The only thing I'm still wondering about is if phy-twl4030-usb.c is losing ID pin interrupts occasionally but have not been able to verify that. Maybe try the following additional patch and see if it makes any difference?
Regards,
Tony
8< --------------
drivers/phy/phy-twl4030-usb.c +11 -0
@@ -304,6 +304,17 @@ static enum musb_vbus_id_status status &= ~BIT (7 ); else twl->vbus_supplied = true; + +/* Recheck status again for ID pin */ +if (!(status &BIT (2 ))) { +msleep (200 ); + status =twl4030_readb (twl, +TWL_MODULE_PM_MASTER , +STS_HW_CONDITIONS ); +if (status <0 ) +dev_err (twl->dev,"USB link status err %d\n" , + status); + } }if (status &BIT (2 ))
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 14 lines · Tony Lindgren
Quoted 5 lines · Ladislav Michl
Hi Tony,
Quoted 2 lines · Tony Lindgren
Hi all,
Quoted 7 lines
Quoted 3 lines
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
I still need
87326e858448c40e32f142c0b8dcc59d7b27c641(usb: musb: Remove extra PM runtime calls from 2430 glue layer) reverted, but I'm happy with that solution so far.
Quoted 6 lines
Weird, I have not figured out what happens there..
The only thing I'm still wondering about is if
phy-twl4030-usb.cis losing ID pin interrupts occasionally but have not been able to verify that. Maybe try the following additional patch and see if it makes any difference?
And eventually the glue layers only should need to do this on init:
pm_runtime_enable(glue->dev);
And this on the exit path:
pm_runtime_disable(glue->dev);
And musb core as the child device should keep things awake when needed.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines · Tony Lindgren
Quoted 6 lines · Tony Lindgren
Weird, I have not figured out what happens there..
The only thing I'm still wondering about is if
phy-twl4030-usb.cis losing ID pin interrupts occasionally but have not been able to verify that. Maybe try the following additional patch and see if it makes any difference?And eventually the glue layers only should need to do this on init:
Quoted 8 lines
pm_runtime_enable(glue->dev);And this on the exit path:
pm_runtime_disable(glue->dev);And musb core as the child device should keep things awake when needed.
Tested your patch, does not work, does not trigger "USB link status err" both without and with pm_runtime_enable/disable.
Best regards,
ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161108171951.GA27533-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 16 lines · Ladislav Michl
Quoted 15 lines · Tony Lindgren
Quoted 6 lines · Tony Lindgren
Weird, I have not figured out what happens there..
The only thing I'm still wondering about is if
phy-twl4030-usb.cis losing ID pin interrupts occasionally but have not been able to verify that. Maybe try the following additional patch and see if it makes any difference?And eventually the glue layers only should need to do this on init:
pm_runtime_enable(glue->dev);And this on the exit path:
Quoted 7 lines
Quoted 4 lines
pm_runtime_disable(glue->dev);And musb core as the child device should keep things awake when needed.
Tested your patch, does not work, does not trigger "USB link status err" both without and with pm_runtime_enable/disable.
OK. The patch below still works for me with musb_core.c autosuspend_delay set to 100. Also works with it set to 10.
Note that we had two timeouts without this.. Can you try playing with the timeout in musb_core.c and see if that helps?
Regards,
Tony
8< ------------------
drivers/usb/musb/musb_core.c +2 -3
@@ -1898,8 +1898,7 @@ static void musb_pm_runtime_check_session(struct musb *musb) musb->quirk_retries =3 ; }else {musb_dbg (musb,"Allow PM with no session: %02x" , devctl); -pm_runtime_mark_last_busy (musb->controller); -pm_runtime_put_autosuspend (musb->controller); +pm_runtime_put_sync_suspend (musb->controller); } musb->session = s;
@@ -2268,7 +2267,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)* 500 ms for some margin. */ pm_runtime_use_autosuspend (musb->controller); -pm_runtime_set_autosuspend_delay (musb->controller,500 ); +pm_runtime_set_autosuspend_delay (musb->controller,100 );pm_runtime_enable (musb->controller);pm_runtime_get_sync (musb->controller);
drivers/usb/musb/omap2430.c +4 -6
@@ -513,17 +513,18 @@ static int omap2430_probe(struct platform_device *pdev) }pm_runtime_enable (glue->dev); -pm_runtime_use_autosuspend (glue->dev); -pm_runtime_set_autosuspend_delay (glue->dev,100 ); ret =platform_device_add (musb);if (ret) {dev_err (&pdev->dev,"failed to register musb device\n" ); - goto err2; + goto err3; }return 0 ; +err3: +pm_runtime_disable (glue->dev); + err2:platform_device_put (musb);
@@ -535,10 +536,7 @@ static int omap2430_remove(struct platform_device *pdev) {struct omap2430_glue *glue =platform_get_drvdata (pdev); -pm_runtime_get_sync (glue->dev);platform_device_unregister (glue->musb); -pm_runtime_put_sync (glue->dev); -pm_runtime_dont_use_autosuspend (glue->dev);pm_runtime_disable (glue->dev);return 0 ;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Ladislav Michl
Tested-byQuoted 6 lines · Tony Lindgren
OK. The patch below still works for me with
musb_core.cautosuspend_delayset to 100. Also works with it set to 10.Note that we had two timeouts without this.. Can you try playing with the timeout in
musb_core.cand see if that helps?
This patch works for me, also with autosuspend_delay set to 10.
Thank you,
ladis
Quoted 53 lines
Regards,
Tony
8< ------------------
drivers/usb/musb/musb_core.c +2
-3@@ -1898,8 +1898,7 @@ static void musb_pm_runtime_check_session(struct musb *musb) musb->quirk_retries =3 ; }else {musb_dbg (musb,"Allow PM with no session: %02x" , devctl); -pm_runtime_mark_last_busy (musb->controller); -pm_runtime_put_autosuspend (musb->controller); +pm_runtime_put_sync_suspend (musb->controller); } musb->session = s;@@ -2268,7 +2267,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)* 500 ms for some margin. */ pm_runtime_use_autosuspend (musb->controller); -pm_runtime_set_autosuspend_delay (musb->controller,500 ); +pm_runtime_set_autosuspend_delay (musb->controller,100 );pm_runtime_enable (musb->controller);pm_runtime_get_sync (musb->controller);drivers/usb/musb/omap2430.c +4
-3@@ -513,17 +513,18 @@ static int omap2430_probe(struct platform_device *pdev) }pm_runtime_enable (glue->dev); -pm_runtime_use_autosuspend (glue->dev); -pm_runtime_set_autosuspend_delay (glue->dev,100 ); ret =platform_device_add (musb);if (ret) {dev_err (&pdev->dev,"failed to register musb device\n" ); - goto err2; + goto err3; }return 0 ; +err3: +pm_runtime_disable (glue->dev); + err2:platform_device_put (musb);
drivers/usb/musb/omap2430.c static int omap2430_remove(struct platform_device *pdev) · line 542
Quoted 10 lines
drivers/usb/musb/omap2430.c +0
-3@@ -535,10 +536,7 @@ static int omap2430_remove(struct platform_device *pdev) {struct omap2430_glue *glue =platform_get_drvdata (pdev); -pm_runtime_get_sync (glue->dev);platform_device_unregister (glue->musb); -pm_runtime_put_sync (glue->dev); -pm_runtime_dont_use_autosuspend (glue->dev);pm_runtime_disable (glue->dev);return 0 ;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161108225206.GA14049-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 10 lines · Ladislav Michl
Quoted 6 lines · Tony Lindgren
OK. The patch below still works for me with
musb_core.cautosuspend_delayset to 100. Also works with it set to 10.Note that we had two timeouts without this.. Can you try playing with the timeout in
musb_core.cand see if that helps?This patch works for me, also with
autosuspend_delayset to 10.
Oh so to confirm, the $subject series patches + this one only fixes your issue? So no more revert needed?
I think the musb_core timeout had to be 500 to idle the 2430 glue layer phy also, but I need to recheck that. That should be a separate patch and can be done later.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Tony Lindgren
Quoted 9 lines · Ladislav Michl
Quoted 6 lines · Tony Lindgren
OK. The patch below still works for me with
musb_core.cautosuspend_delayset to 100. Also works with it set to 10.Note that we had two timeouts without this.. Can you try playing with the timeout in
musb_core.cand see if that helps?
Quoted 4 lines
Quoted 1 line
This patch works for me, also with
autosuspend_delayset to 10.Oh so to confirm, the $subject series patches + this one only fixes your issue? So no more revert needed?
Right. Revert is no more needed.
Quoted 7 lines
I think the
musb_coretimeout had to be 500 to idle the 2430 glue layer phy also, but I need to recheck that. That should be a separate patch and can be done later.Regards,
Tony
Regards,
ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20161108233934.GA25005-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 11 lines · Ladislav Michl
Quoted 10 lines · Tony Lindgren
Quoted 9 lines · Ladislav Michl
Quoted 6 lines · Tony Lindgren
OK. The patch below still works for me with
musb_core.cautosuspend_delayset to 100. Also works with it set to 10.Note that we had two timeouts without this.. Can you try playing with the timeout in
musb_core.cand see if that helps?
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
This patch works for me, also with
autosuspend_delayset to 10.Oh so to confirm, the $subject series patches + this one only fixes your issue? So no more revert needed?
Right. Revert is no more needed.
OK good to hear!
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Laurent Pinchart
Tested-byHi Tony,
Thank you for the patches.
Quoted 11 lines · On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
The series fixes my problems, both with the original and latest version of patch 2/4.
I have however seen the following warning once with the original version of 2/4.
[ 3.094116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110626] ------------[ cut here ]------------ [ 3.110717] WARNING: CPU: 0 PID: 4 at /home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x348 [ 3.110717] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional access [ 3.110717] Modules linked in: [ 3.110717] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.9.0-rc4-00577-g1cd727de4a19 #29 [ 3.110717] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 3.110717] Workqueue: events musb_irq_work [ 3.158813] [<c0110118>] (unwind_backtrace) from [<c010c0cc>] (show_stack+0x10/0x14) [ 3.158813] [<c010c0cc>] (show_stack) from [<c0490dec>] (dump_stack+0xa8/0xe0) [ 3.158813] [<c0490dec>] (dump_stack) from [<c01377e4>] (__warn+0xd8/0x104) [ 3.158813] [<c01377e4>] (__warn) from [<c01378b8>] (warn_slowpath_fmt+0x38/0x48) [ 3.158813] [<c01378b8>] (warn_slowpath_fmt) from [<c04c49d4>] (l3_interrupt_handler+0x220/0x348) [ 3.203613] [<c04c49d4>] (l3_interrupt_handler) from [<c01a03d0>] (__handle_irq_event_percpu+0x98/0x3ec) [ 3.203613] [<c01a03d0>] (__handle_irq_event_percpu) from [<c01a0740>] (handle_irq_event_percpu+0x1c/0x58) [ 3.203613] [<c01a0740>] (handle_irq_event_percpu) from [<c01a07b4>] (handle_irq_event+0x38/0x5c) [ 3.233123] [<c01a07b4>] (handle_irq_event) from [<c01a3c38>] (handle_fasteoi_irq+0xcc/0x1a4) [ 3.233123] [<c01a3c38>] (handle_fasteoi_irq) from [<c019fb40>] (generic_handle_irq+0x18/0x28) [ 3.233123] [<c019fb40>] (generic_handle_irq) from [<c019fc54>] (__handle_domain_irq+0x64/0xdc) [ 3.251190] [<c019fc54>] (__handle_domain_irq) from [<c010152c>] (gic_handle_irq+0x48/0x9c) [ 3.251190] [<c010152c>] (gic_handle_irq) from [<c087fdb0>] (__irq_svc+0x70/0x98) [ 3.251190] Exception stack(0xee8c7e18 to 0xee8c7e60) [ 3.251190] 7e00: fc0ab000 00000060 [ 3.282348] 7e20: 0000001f 00000000 00000000 ef6a7ac0 fc0ab000 00000060 c0dcda2c c06a2928 [ 3.282348] 7e40: c0d0512c c0d0512c 00000000 ee8c7e68 c06a2928 c06a34b8 60000153 ffffffff [ 3.282348] [<c087fdb0>] (__irq_svc) from [<c06a34b8>] (musb_default_readb+0x48/0x184) [ 3.282348] [<c06a34b8>] (musb_default_readb) from [<c06a2928>] (musb_irq_work+0x1c/0x1cc) [ 3.316528] [<c06a2928>] (musb_irq_work) from [<c0154c94>] (process_one_work+0x1d4/0x6b8) [ 3.325256] [<c0154c94>] (process_one_work) from [<c0155314>] (worker_thread+0x164/0x488) [ 3.325256] [<c0155314>] (worker_thread) from [<c015b7e4>] (kthread+0xd0/0xec) [ 3.325256] [<c015b7e4>] (kthread) from [<c01083f0>] (ret_from_fork+0x14/0x24) [ 3.325256] ---[ end trace 0c154bedf8e63312 ]--- [ 3.363372] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Initialized TWL6030 USB module [ 3.365051] hub 1-1:1.0: USB hub found [ 3.365325] hub 1-1:1.0: 5 ports detected
It never occurred with the latest version of the patch, but I can't seem to reproduce it either with the original version.
Quoted 14 lines
Tony Lindgren (4):
usb: musb: Fix broken use of static variable for multiple instances
usb: musb: Fix sleeping function called from invalid context for hdrc
glue
usb: musb: Fix PM for hub disconnect
phy: twl4030-usb: Fix for musb session bit based PMdrivers/phy/phy-twl4030-usb.c | 4 +- drivers/usb/musb/musb_core.c | 107 ++++++++++++++++++++++++++++++++------ drivers/usb/musb/musb_core.h | 13 ++++- drivers/usb/musb/musb_dsps.c | 24 ++++++--- drivers/usb/musb/musb_gadget.c | 28 ++++++++--- drivers/usb/musb/tusb6010.c | 6 +-- 6 files changed, 148 insertions(+), 34 deletions(-)
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 14 lines · Laurent Pinchart
Hi Tony,
Thank you for the patches.
Quoted 9 lines · On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Quoted 7 lines
Quoted 2 lines
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
The series fixes my problems, both with the original and latest version of patch 2/4.
OK good to hear and thanks for testing.
Quoted 7 lines
I have however seen the following warning once with the original version of 2/4.
[ 3.094116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110626] ------------[ cut here ]------------ [ 3.110717] WARNING: CPU: 0 PID: 4 at /home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x348 [ 3.110717] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional access
I've seen similar with interconnect target was not ready in time on ti81xx when booting that got fixed with commit ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x"). It is possible that omap4 needs similar fix but hard to say unless we have it reproducable. Anyways, below is an untested patch for omap4 to play with. Maybe repeated reboot or modprobe test would make it reproducable?
Regards,
Tony
8< ------------------------------
arch/arm/mach-omap2/omap_hwmod_44xx_data.c +1 -0
@@ -2982,6 +2982,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, .syss_offs = 0x0408, + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_AUTOIDLE |SYSC_HAS_ENAWAKEUP |SYSC_HAS_MIDLEMODE |SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Tony,
Quoted 33 lines · On Thursday 10 Nov 2016 08:01:52 Tony Lindgren wrote:
Quoted 10 lines · Laurent Pinchart
Quoted 9 lines · On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Quoted 7 lines
Quoted 2 lines
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
The series fixes my problems, both with the original and latest version of patch 2/4.
OK good to hear and thanks for testing.
Quoted 8 lines
I have however seen the following warning once with the original version of 2/4.
[ 3.094116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110626] ------------[ cut here ]------------ [ 3.110717] WARNING: CPU: 0 PID: 4 atQuoted 4 lines
/home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147l3_interrupt_handler+0x220/0x348[ 3.110717] 44000000.ocp:L3 Custom
Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional access
Quoted 7 lines
I've seen similar with interconnect target was not ready in time on ti81xx when booting that got fixed with commit
ebf244148092("ARM: OMAP2+: Usesrst_udelayfor USB on dm814x"). It is possible that omap4 needs similar fix but hard to say unless we have it reproducable. Anyways, below is an untested patch for omap4 to play with. Maybe repeated reboot or modprobe test would make it reproducable?
I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while active
printed in a loop at boot time. I've traced musb->is_active being set to 1 in musb_start() with
musb->port_mode = MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state = OTG_STATE_A_IDLE
devctl = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_VBUS
I can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
Quoted 13 lines
8< ------------------------------
(quoted diff) +0
-0
b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c---a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++b/arch/arm/mach-omap2/omap_hwmod_44xx_data.carch/arm/mach-omap2/omap_hwmod_44xx_data.c +1
-0@@ -2982,6 +2982,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, .syss_offs = 0x0408, + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_AUTOIDLE |SYSC_HAS_ENAWAKEUP |SYSC_HAS_MIDLEMODE |SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 55 lines · On Thursday 10 Nov 2016 19:18:23 Laurent Pinchart wrote:
Quoted 35 lines · On Thursday 10 Nov 2016 08:01:52 Tony Lindgren wrote:
Quoted 10 lines · Laurent Pinchart
Quoted 9 lines · On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Quoted 8 lines
Quoted 2 lines
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
The series fixes my problems, both with the original and latest version of
patch 2/4.OK good to hear and thanks for testing.
I have however seen the following warning once with the original version
Quoted 11 lines
of 2/4.
[ 3.094116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110626] ------------[ cut here ]------------ [ 3.110717] WARNING: CPU: 0 PID: 4 at
/home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147l3_interrupt_handler+0x220/0x348[ 3.110717] 44000000.ocp:L3 Custom
Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional accessQuoted 7 lines
I've seen similar with interconnect target was not ready in time on ti81xx when booting that got fixed with commit
ebf244148092("ARM: OMAP2+: Usesrst_udelayfor USB on dm814x"). It is possible that omap4 needs similar fix but hard to say unless we have it reproducable. Anyways, below is an untested patch for omap4 to play with. Maybe repeated reboot or modprobe test would make it reproducable?I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()with
Quoted 6 lines
musb->port_mode=MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state=OTG_STATE_A_IDLE
devctl =MUSB_DEVCTL_BDEVICE|MUSB_DEVCTL_VBUSI can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
And on a side note, selecting CONFIG_USB_GADGET=m makes it impossible to build CONFIG_USB_NOT_XCEIV=y, making OMAP3 EHCI support only available as a module. *sigh* :-)
Felipe, git blame points at you, can this be fixed ?
Quoted 17 lines
Quoted 17 lines
8< ------------------------------
(quoted diff) +0
-0
b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c---a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c(quoted diff) +1
-0@@ -2982,6 +2982,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, .syss_offs = 0x0408, + .srst_udelay = 2,arch/arm/mach-omap2/omap_hwmod_44xx_data.c +0
-0.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |SYSC_HAS_MIDLEMODE |SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 57 lines · On Thursday 10 Nov 2016 19:18:23 Laurent Pinchart wrote:
Hi Tony,
Quoted 35 lines · On Thursday 10 Nov 2016 08:01:52 Tony Lindgren wrote:
Quoted 10 lines · Laurent Pinchart
Quoted 9 lines · On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
Hi all,
Here are musb fixes for the issues that I've been able to track down. Not sure if these will help with the problem Ladis was seeing as I'm not able to reproduce that one it seems.
As many people depend on this driver I'd like to have these merged for v4.9-rc cycle after review and testing.
Quoted 8 lines
Quoted 2 lines
Please review and test. You need to use v4.9-rc3 or later for testing because of the earlier fixes.
The series fixes my problems, both with the original and latest version of
patch 2/4.OK good to hear and thanks for testing.
Quoted 8 lines
I have however seen the following warning once with the original version of 2/4.
[ 3.094116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110626] ------------[ cut here ]------------ [ 3.110717] WARNING: CPU: 0 PID: 4 atQuoted 4 lines
/home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147l3_interrupt_handler+0x220/0x348[ 3.110717] 44000000.ocp:L3 Custom
Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional accessQuoted 7 lines
I've seen similar with interconnect target was not ready in time on ti81xx when booting that got fixed with commit
ebf244148092("ARM: OMAP2+: Usesrst_udelayfor USB on dm814x"). It is possible that omap4 needs similar fix but hard to say unless we have it reproducable. Anyways, below is an untested patch for omap4 to play with. Maybe repeated reboot or modprobe test would make it reproducable?I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()with
Quoted 6 lines
musb->port_mode=MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state=OTG_STATE_A_IDLE
devctl =MUSB_DEVCTL_BDEVICE|MUSB_DEVCTL_VBUSI can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
Turns out it doesn't :-(
CONFIG_USB_MUSB_HDRC=yCONFIG_USB_MUSB_HOST=y
# CONFIG_USB_GADGET is not set
and the problem still occurs.
Quoted 17 lines
Quoted 17 lines
8< ------------------------------
(quoted diff) +0
-0
b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c---a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c(quoted diff) +1
-0@@ -2982,6 +2982,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, .syss_offs = 0x0408, + .srst_udelay = 2,arch/arm/mach-omap2/omap_hwmod_44xx_data.c +0
-0.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |SYSC_HAS_MIDLEMODE |SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 10 lines · Laurent Pinchart
I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while activeprinted in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()with
Quoted 6 lines
musb->port_mode=MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state=OTG_STATE_A_IDLE
devctl =MUSB_DEVCTL_BDEVICE|MUSB_DEVCTL_VBUSI can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
Do you have the ID pin grounded or how do you get to the A_IDLE state? I'm pretty much only testing with loadable modules as in omap2plus_defconfig, I don't think I've seen this issue..
Maybe check the changes in your .config against just plain omap2plus_defconfig? Are you trying to force host only mode?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Tony,
Quoted 12 lines · On Thursday 10 Nov 2016 10:50:33 Tony Lindgren wrote:
Quoted 11 lines · Laurent Pinchart
I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()with
Quoted 8 lines
Quoted 6 lines
musb->port_mode=MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state=OTG_STATE_A_IDLE
devctl =MUSB_DEVCTL_BDEVICE|MUSB_DEVCTL_VBUSI can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
Do you have the ID pin grounded
I've measured it on the board and I don't. Booting with the USB cable unplugged and the board powered through the power jack gives the same result.
Quoted 1 line
or how do you get to the
A_IDLEstate?
Don't ask me :-)
Quoted 5 lines
I'm pretty much only testing with loadable modules as in
omap2plus_defconfig, I don't think I've seen this issue..Maybe check the changes in your .config against just plain
omap2plus_defconfig? Are you trying to force host only mode?
I started anew from omap2plus_defconfig and applied the following changes to enable NFS root.
-CONFIG_USB_NET_DRIVERS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_HCD_OMAP=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_USB_GADGET=m
-CONFIG_OMAP_USB2=m
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_OMAP=y
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_USB_GADGET is not set
+CONFIG_OMAP_USB2=y
I had to disable CONFIG_USB_GADGET is compiling it as a module prevents selecting CONFIG_NOP_USB_XCEIV=y, which is a dependency for CONFIG_USB_EHCI_HCD_OMAP=m.
The new configuration resulted in a few changes, among which the most notable is
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_DUAL_ROLE=y
+CONFIG_USB_MUSB_HOST=y
I then get the same error as originally reported.
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=y
Quoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Any ideas why we have a dependency like that in Kconfig?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Tony,
Quoted 13 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=y
Quoted 7 lines
Quoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Any ideas why we have a dependency like that in
Kconfig?
Well, with CONFIG_USB_GADGET disabled, I don't expect CONFIG_USB_MUSB_GADGET to be enabled. MUSB can only operate in host mode in that case, so musb-
Quoted 1 line
xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello,
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 5 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.
I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to MUSB_PORT_MODE_DUAL_ROLE in DT, a kernel configured with CONFIG_USB_MUSB_HOST=y (for instance because CONFIG_USB_GADGET is disabled) will print an endless stream of the following meessage.
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while active
musb_init_controller() performs the following actions
case MUSB_PORT_MODE_DUAL_ROLE:
status = musb_host_setup(musb, plat->power);
if (status < 0)
goto fail3;
status = musb_gadget_setup(musb);
if (status) {
musb_host_cleanup(musb);
goto fail3;
}
status = musb_platform_set_mode(musb, MUSB_OTG);
break;and as gadget support is disabled musb_gadget_setup() compiles to a no-op inline function. The system is thus configured in host mode by musb_host_setup() with musb->xceiv->otg->state = OTG_STATE_A_IDLE. A later call to musb_start() verifies the condition
if (musb->port_mode != MUSB_PORT_MODE_HOST &&
musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {and sets musb->is_active to 1. Later, musb_bus_suspend() complains because is_active is not 0.
What is wrong in that sequence ?
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 33 lines · Laurent Pinchart
Hello,
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 5 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
Quoted 6 lines
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to
MUSB_PORT_MODE_DUAL_ROLEin DT, a kernel configured withCONFIG_USB_MUSB_HOST=y(for instance becauseCONFIG_USB_GADGETis disabled) will print an endless stream of the following meessage.[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while active
I don't have a omap3/4 platform to test on this, but I don't see this problem on am335x board.
Quoted 15 lines
musb_init_controller()performs the following actionscase MUSB_PORT_MODE_DUAL_ROLE: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_gadget_setup(musb); if (status) { musb_host_cleanup(musb); goto fail3; } status = musb_platform_set_mode(musb, MUSB_OTG); break;
Quoted 8 lines
and as gadget support is disabled
musb_gadget_setup()compiles to a no-op inline function. The system is thus configured in host mode bymusb_host_setup()withmusb->xceiv->otg->state=OTG_STATE_A_IDLE. A later call tomusb_start()verifies the conditionif (musb->port_mode != MUSB_PORT_MODE_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
To get there, devctl[MUSB_DEVCTL_VBUS] bits have to be set, where does the vbus voltage come from? Session is not on yet.
Quoted 11 lines
and sets
musb->is_activeto 1. Later,musb_bus_suspend()complains becauseis_activeis not 0.What is wrong in that sequence ?
Signature · 3 lines
Regards, Laurent Pinchart
Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 64 lines · Bin Liu
Quoted 33 lines · Laurent Pinchart
Hello,
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 5 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
Quoted 6 lines
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to
MUSB_PORT_MODE_DUAL_ROLEin DT, a kernel configured withCONFIG_USB_MUSB_HOST=y(for instance becauseCONFIG_USB_GADGETis disabled) will print an endless stream of the following meessage.[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while activeI don't have a omap3/4 platform to test on this, but I don't see this problem on am335x board.
Quoted 20 lines
musb_init_controller()performs the following actionscase MUSB_PORT_MODE_DUAL_ROLE: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_gadget_setup(musb); if (status) { musb_host_cleanup(musb); goto fail3; } status = musb_platform_set_mode(musb, MUSB_OTG); break;and as gadget support is disabled
musb_gadget_setup()compiles to a no-op inline function. The system is thus configured in host mode bymusb_host_setup()withmusb->xceiv->otg->state=OTG_STATE_A_IDLE. A later call tomusb_start()verifies the condition
Quoted 12 lines
Quoted 3 lines
if (musb->port_mode != MUSB_PORT_MODE_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {To get there, devctl[MUSB_DEVCTL_VBUS] bits have to be set, where does the vbus voltage come from? Session is not on yet.
Quoted 5 lines
and sets
musb->is_activeto 1. Later,musb_bus_suspend()complains becauseis_activeis not 0.What is wrong in that sequence ?
I think the issue is pandaboard connected to a PC with mini-B cable while musb is being forced to host mode?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello,
Quoted 42 lines · On Friday 11 Nov 2016 08:53:22 Tony Lindgren wrote:
Quoted 41 lines · Bin Liu
Quoted 40 lines · Laurent Pinchart
Hello,
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 6 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to
MUSB_PORT_MODE_DUAL_ROLEin DT, a kernel configured withCONFIG_USB_MUSB_HOST=y(for instance becauseCONFIG_USB_GADGETis disabled) will print an endless stream of the following meessage.
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
I don't have a omap3/4 platform to test on this, but I don't see this problem on am335x board.
Which board is that ? For the problem to occur the board has to have an OTG connector.
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
musb_init_controller()performs the following actionscase MUSB_PORT_MODE_DUAL_ROLE: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_gadget_setup(musb); if (status) { musb_host_cleanup(musb); goto fail3; } status = musb_platform_set_mode(musb, MUSB_OTG); break;and as gadget support is disabled
musb_gadget_setup()compiles to a no-op inline function. The system is thus configured in host mode bymusb_host_setup()withmusb->xceiv->otg->state=OTG_STATE_A_IDLE. A later call tomusb_start()verifies the condition
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
if (musb->port_mode != MUSB_PORT_MODE_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {To get there, devctl[MUSB_DEVCTL_VBUS] bits have to be set, where does the vbus voltage come from? Session is not on yet.
MUSB_DEVCTL is first set to 0 by musb_generic_disable() called from musb_init_controller(). The register is then left untouched (as far as I can tell, I've intercepted all musb_writeb() and musb_readb() calls) until musb_start() to reads the register. The read value has BDEVICE and VBUS=3 set.
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
and sets
musb->is_activeto 1. Later,musb_bus_suspend()complains becauseis_activeis not 0.What is wrong in that sequence ?
I think the issue is pandaboard connected to a PC with mini-B cable while musb is being forced to host mode?
The issue also occurs when the cable isn't connected.
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 45 lines · Laurent Pinchart
Hello,
Quoted 42 lines · On Friday 11 Nov 2016 08:53:22 Tony Lindgren wrote:
Quoted 41 lines · Bin Liu
Quoted 40 lines · Laurent Pinchart
Hello,
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 6 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to
MUSB_PORT_MODE_DUAL_ROLEin DT, a kernel configured withCONFIG_USB_MUSB_HOST=y(for instance becauseCONFIG_USB_GADGETis disabled) will print an endless stream of the following meessage.
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
I don't have a omap3/4 platform to test on this, but I don't see this problem on am335x board.
Which board is that ? For the problem to occur the board has to have an OTG connector.
It is the TI am335x GP EVM, which usb0 port has an otg receptacle, and a power switch controlled by usb0 drvvbus pin.
Quoted 24 lines
Quoted 24 lines
Quoted 24 lines
Quoted 23 lines
musb_init_controller()performs the following actionscase MUSB_PORT_MODE_DUAL_ROLE: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_gadget_setup(musb); if (status) { musb_host_cleanup(musb); goto fail3; } status = musb_platform_set_mode(musb, MUSB_OTG); break;and as gadget support is disabled
musb_gadget_setup()compiles to a no-op inline function. The system is thus configured in host mode bymusb_host_setup()withmusb->xceiv->otg->state=OTG_STATE_A_IDLE. A later call tomusb_start()verifies the conditionif (musb->port_mode != MUSB_PORT_MODE_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
To get there, devctl[MUSB_DEVCTL_VBUS] bits have to be set, where does the vbus voltage come from? Session is not on yet.
MUSB_DEVCTLis first set to 0 bymusb_generic_disable()called frommusb_init_controller(). The register is then left untouched (as far as I can tell, I've intercepted allmusb_writeb()andmusb_readb()calls) untilmusb_start()to reads the register. The read value has BDEVICE and VBUS=3 set.
The DEVCTL_VBUS bits are set by the controller, when it sense VBUS voltage > VBUS_VALID.
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
and sets
musb->is_activeto 1. Later,musb_bus_suspend()complains becauseis_activeis not 0.What is wrong in that sequence ?
I think the issue is pandaboard connected to a PC with mini-B cable while musb is being forced to host mode?
The issue also occurs when the cable isn't connected.
If the otg port is not connected to a host but you still get VBUS=3, the vbus voltage must be provided from the board itself. We have to check the schematics to see how it is possible. This is pandaboard es, right? Assume I will be able to find its schematics on internet...
Quoted 6 lines
Signature · 4 lines
-- Regards, Laurent Pinchart
Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Bin,
Quoted 97 lines · On Friday 11 Nov 2016 17:06:02 Bin Liu wrote:
Quoted 41 lines · Laurent Pinchart
Quoted 40 lines · On Friday 11 Nov 2016 08:53:22 Tony Lindgren wrote:
Quoted 39 lines · Bin Liu
Quoted 38 lines · Laurent Pinchart
Quoted 20 lines · On Friday 11 Nov 2016 00:27:52 Laurent Pinchart wrote:
Quoted 19 lines · On Thursday 10 Nov 2016 13:42:34 Tony Lindgren wrote:
Quoted 12 lines · Laurent Pinchart
I had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=yQuoted 1 line
I then get the same error as originally reported.
Yeah OK, that's the problem.. We still have musb hardware trying to do things on it's own and phy trying to detect the state.
Quoted 6 lines
Quoted 1 line
Any ideas why we have a dependency like that in
Kconfig?Well, with
CONFIG_USB_GADGETdisabled, I don't expectCONFIG_USB_MUSB_GADGETto be enabled. MUSB can only operate in host mode in that case, so musb->xceiv->otg->state=OTG_STATE_A_IDLEmakes sense.I've tried to investigate this but I'm not familiar enough with the MUSB driver to reach any conclusion. Felipe, if you have time could you give me a hand ?
To summarize the issue, on a pandaboard-es where the MUSB is wired to an OTG connector with mode rightfully set to
MUSB_PORT_MODE_DUAL_ROLEin DT, a kernel configured withCONFIG_USB_MUSB_HOST=y(for instance becauseCONFIG_USB_GADGETis disabled) will print an endless stream of the following meessage.Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idlewhile active
I don't have a omap3/4 platform to test on this, but I don't see this problem on am335x board.
Which board is that ? For the problem to occur the board has to have an OTG connector.
It is the TI am335x GP EVM, which usb0 port has an otg receptacle, and a power switch controlled by usb0 drvvbus pin.
Quoted 23 lines
Quoted 23 lines
Quoted 23 lines
Quoted 22 lines
musb_init_controller()performs the following actionscase MUSB_PORT_MODE_DUAL_ROLE: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_gadget_setup(musb); if (status) { musb_host_cleanup(musb); goto fail3; } status = musb_platform_set_mode(musb, MUSB_OTG); break;and as gadget support is disabled
musb_gadget_setup()compiles to a no-op inline function. The system is thus configured in host mode bymusb_host_setup()withmusb->xceiv->otg->state=OTG_STATE_A_IDLE. A later call tomusb_start()verifies the conditionif (musb->port_mode != MUSB_PORT_MODE_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
To get there, devctl[MUSB_DEVCTL_VBUS] bits have to be set, where does the vbus voltage come from? Session is not on yet.
MUSB_DEVCTLis first set to 0 bymusb_generic_disable()called frommusb_init_controller(). The register is then left untouched (as far as I can tell, I've intercepted allmusb_writeb()andmusb_readb()calls) untilmusb_start()to reads the register. The read value has BDEVICE and VBUS=3 set.The
DEVCTL_VBUSbits are set by the controller, when it sense VBUS voltage >VBUS_VALID.Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
and sets
musb->is_activeto 1. Later,musb_bus_suspend()complains becauseis_activeis not 0.What is wrong in that sequence ?
I think the issue is pandaboard connected to a PC with mini-B cable while musb is being forced to host mode?
Quoted 6 lines
Quoted 1 line
The issue also occurs when the cable isn't connected.
If the otg port is not connected to a host but you still get VBUS=3, the vbus voltage must be provided from the board itself. We have to check the schematics to see how it is possible. This is pandaboard es, right? Assume I will be able to find its schematics on internet...
http://pandaboard.org/sites/default/files/board_reference/ES/750-2170-002-sch_revb.pdf
It would seem that the voltage is provided by the TWL6030. I'm not sure what's turning it on as the MUSB driver doesn't seem to perform any set_vbus call in the faulty configuration (I've traced musb_platform_set_vbus(), omap2430_musb_set_vbus(), otg_set_vbus(), omap_usb_set_vbus() and twl6030_set_vbus() and none of them get called).
An interesting point to note is that the TWL6030 gets probed after MUSB when MUSB is configured in host mode only, and that happens after the call to musb_start().
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Laurent,
Quoted 10 lines · Laurent Pinchart
Hi Bin,
http://pandaboard.org/sites/default/files/board_reference/ES/750-2170-002-sch_revb.pdf
It would seem that the voltage is provided by the TWL6030. I'm not sure what's turning it on as the MUSB driver doesn't seem to perform any
set_vbuscall in the faulty configuration (I've tracedmusb_platform_set_vbus(),omap2430_musb_set_vbus(),otg_set_vbus(),omap_usb_set_vbus()andtwl6030_set_vbus()and none of them get called).
Quoted 3 lines
An interesting point to note is that the TWL6030 gets probed after MUSB when MUSB is configured in host mode only, and that happens after the call to
musb_start().
just gave 4.9.0 more testing on IGEPv2 board (DM3730 based), schematics here:
https://www.isee.biz/support/downloads/item/igepv2-rc-schematics
musb is configured in host only mode, driver compiled in. ID pin is grounded, VBUS not connected, D+, D-, and GND are connected to self powered hub.
$ lsusb -t
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-omap/3p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=udlfb, 480M
|__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 4: Dev 5, If 1, Class=CDC Data, Driver=cdc_acm, 12M
|__ Port 4: Dev 5, If 0, Class=Communications, Driver=cdc_acm, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci-omap3/3p, 12M1) without following patch I'm getting:
udlfb: wait for urb interrupted: ffffffc2 available: 0 however, devices get enumerated
drivers/usb/musb/musb_core.c +1 -1
@@ -2275,7 +2274,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)* 500 ms for some margin. */ pm_runtime_use_autosuspend (musb->controller); -pm_runtime_set_autosuspend_delay (musb->controller,500 ); +pm_runtime_set_autosuspend_delay (musb->controller,100 );pm_runtime_enable (musb->controller);pm_runtime_get_sync (musb->controller);
2) With the patch above, everything is working correctly, until I unplug all devices from hub. Usb core then tries to suspend port which leads to endless flood of:
musb_bus_suspend 2586: trying to suspend as a_idle while active Disabling CONFIG_PM causes usb device enumeration stop working.
3) Few boards were still suffering from:
musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90, <VBusValid), retry #3, port1 00000104 but that turned out to be hardware problem as they came to customer with
OTG connector, tvs diodes and capacitor unpopulated and customer's technician soldered C834 with wrong polarity, causing twl's charge
pump surrending its job after a while.
Anyone has a clue how to fix 2?
Best regards,
ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 33 lines · Ladislav Michl
Hi Laurent,
Quoted 10 lines · Laurent Pinchart
Hi Bin,
http://pandaboard.org/sites/default/files/board_reference/ES/750-2170-002-sch_revb.pdf
It would seem that the voltage is provided by the TWL6030. I'm not sure what's turning it on as the MUSB driver doesn't seem to perform any
set_vbuscall in the faulty configuration (I've tracedmusb_platform_set_vbus(),omap2430_musb_set_vbus(),otg_set_vbus(),omap_usb_set_vbus()andtwl6030_set_vbus()and none of them get called).Quoted 3 lines
An interesting point to note is that the TWL6030 gets probed after MUSB when MUSB is configured in host mode only, and that happens after the call to
musb_start().just gave 4.9.0 more testing on IGEPv2 board (DM3730 based), schematics here:
https://www.isee.biz/support/downloads/item/igepv2-rc-schematicsmusb is configured in host only mode, driver compiled in. ID pin is grounded, VBUS not connected, D+, D-, and GND are connected to self powered hub.
$ lsusb -t /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-omap/3p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=udlfb, 480M |__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 4: Dev 5, If 1, Class=CDC Data, Driver=cdc_acm, 12M |__ Port 4: Dev 5, If 0, Class=Communications, Driver=cdc_acm, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci-omap3/3p, 12M
Quoted 3 lines
1) without following patch I'm getting:
udlfb: wait for urb interrupted:ffffffc2available: 0 however, devices get enumerated
So things are working..
Quoted 13 lines
drivers/usb/musb/musb_core.c +1
-1@@ -2275,7 +2274,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)* 500 ms for some margin. */ pm_runtime_use_autosuspend (musb->controller); -pm_runtime_set_autosuspend_delay (musb->controller,500 ); +pm_runtime_set_autosuspend_delay (musb->controller,100 );pm_runtime_enable (musb->controller);pm_runtime_get_sync (musb->controller);
Quoted 5 lines
2) With the patch above, everything is working correctly, until I unplug all devices from hub. Usb core then tries to suspend port which leads to endless flood of:
musb_bus_suspend2586: trying to suspend asa_idlewhile active DisablingCONFIG_PMcauses usb device enumeration stop working.
I think that's because musb needs to stay awake a little while to negotiate with the PHY over ULPI whatever. Otherwise I think the PHY might not idle properly, or might be in some unknown state?
If you have ID pin grounded, then a_idle is where we'd expect things to be. That still does not explain why it's stuck in a loop though.
Quoted 6 lines
3) Few boards were still suffering from:
musb-hdrc musb-hdrc.0.auto:VBUS_ERRORina_idle(90, <VBusValid), retry #3, port1 00000104 but that turned out to be hardware problem as they came to customer with
OTG connector, tvs diodes and capacitor unpopulated and customer's technician soldered C834 with wrong polarity, causing twl's charge
pump surrending its job after a while.
OK yeah host mode VBUS errors are common if the VBUS voltage does not come up fast enough for musb.
Quoted 1 line
Anyone has a clue how to fix 2?
No idea.. Maybe try to add some printks to see why active is set at that point?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony,
Quoted 69 lines · On Thursday 10 Nov 2016 22:29:34 Laurent Pinchart wrote:
Quoted 12 lines · On Thursday 10 Nov 2016 10:50:33 Tony Lindgren wrote:
Quoted 11 lines · Laurent Pinchart
I'll try to give it a go, but right now I'm stuck with a different MUSB problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and have switched gadget support from being compiled in to being compiled as a module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withQuoted 8 lines
Quoted 6 lines
musb->port_mode=MUSB_PORT_MODE_DUAL_ROLEmusb->xceiv->otg->state=OTG_STATE_A_IDLE
devctl =MUSB_DEVCTL_BDEVICE|MUSB_DEVCTL_VBUSI can disable gadget support completely which will I believe fix the problem, but that's just a workaround. Help would be appreciated.
Do you have the ID pin grounded
I've measured it on the board and I don't. Booting with the USB cable unplugged and the board powered through the power jack gives the same result.
Quoted 1 line
or how do you get to the
A_IDLEstate?Don't ask me :-)
Quoted 5 lines
I'm pretty much only testing with loadable modules as in
omap2plus_defconfig, I don't think I've seen this issue..Maybe check the changes in your .config against just plain
omap2plus_defconfig? Are you trying to force host only mode?I started anew from
omap2plus_defconfigand applied the following changes to enable NFS root.(quoted diff) +9
-9-CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_HCD_OMAP=m -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GADGET=m -CONFIG_OMAP_USB2=m +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_OMAP=y +CONFIG_NOP_USB_XCEIV=y +# CONFIG_USB_GADGET is not set +CONFIG_OMAP_USB2=yI had to disable
CONFIG_USB_GADGETis compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.The new configuration resulted in a few changes, among which the most notable is
(quoted diff) +1
-3-# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HOST=y
Quoted 1 line
I then get the same error as originally reported.
Actually disabling CONFIG_USB_MUSB_HDRC gets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines · Laurent Pinchart
On Thursday 10 Nov 2016 22:29:34 Laurent Pinchart wrote:
Actually disablingCONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?
OK I think I have my hands full already..
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withActually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?
I'm seeing this too. Did you manage to boot your Panda? If I disable CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.
Tomi
A message that is not in the archive (sent off-list or not yet received): 839f0f26-3bb0-d368-8cff-dbccaffa7244-l0cyMroinI0@public.gmane.org
Hi Tomi,
Quoted 7 lines · On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote:
Quoted 6 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()with
Quoted 7 lines
Quoted 3 lines
Actually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?I'm seeing this too. Did you manage to boot your Panda? If I disable
CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.
Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 is connected to the EHCI USB interface so it shouldn't depend on MUSB.
I've attached my .config to this e-mail.
Signature · 3 lines
Regards, Laurent Pinchart
Quoted 14 lines · Laurent Pinchart
Hi Tomi,
Quoted 11 lines · On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote:
Quoted 9 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withActually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?
Quoted 6 lines
Quoted 3 lines
I'm seeing this too. Did you manage to boot your Panda? If I disable
CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 is connected to the EHCI USB interface so it shouldn't depend on MUSB.
smsx95xx. I didn't look at it further, so possibly there's something else broken/changed that prevented the ethernet from working.
Tomi
A message that is not in the archive (sent off-list or not yet received): 47c6e11e-3725-8955-5cc4-654df4d1c3bc-l0cyMroinI0@public.gmane.org
Quoted 19 lines · Tomi Valkeinen
Quoted 18 lines · Laurent Pinchart
Hi Tomi,
Quoted 14 lines · On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote:
Quoted 9 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withActually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?I'm seeing this too. Did you manage to boot your Panda? If I disable
CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.
Quoted 5 lines
Quoted 2 lines
Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 is connected to the EHCI USB interface so it shouldn't depend on MUSB.
smsx95xx. I didn't look at it further, so possibly there's something else broken/changed that prevented the ethernet from working.
I have omap2plus_defconfig with initramfs work just fine for nfsroot and musb peripheral mode on pandaboard es. Well I have not tried it since last week with Linux next.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 23 lines · Tony Lindgren
Quoted 22 lines · Tomi Valkeinen
Quoted 20 lines · Laurent Pinchart
Hi Tomi,
Quoted 7 lines · On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote:
Quoted 6 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withQuoted 7 lines
Quoted 3 lines
Actually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?I'm seeing this too. Did you manage to boot your Panda? If I disable
CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 is connected to the EHCI USB interface so it shouldn't depend on MUSB.
Quoted 6 lines
Quoted 2 lines
smsx95xx. I didn't look at it further, so possibly there's something else broken/changed that prevented the ethernet from working.
I have
omap2plus_defconfigwith initramfs work just fine for nfsroot and musb peripheral mode on pandaboard es. Well I have not tried it since last week with Linux next.
Ok, I found the issue. I had to enable CONFIG_NOP_USB_XCEIV. (the musb_bus_suspend issue is still there, though).
Tomi
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.9.0-rc6 Kernel Configuration
#CONFIG_ARM=yCONFIG_ARM_HAS_SG_CHAIN=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_ARM_DMA_USE_IOMMU=y CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 CONFIG_MIGHT_HAVE_PCI=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_PROC_CPU=yCONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_BANDGAP=y CONFIG_FIX_EARLYCON_MEM=yCONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=yCONFIG_GENERIC_BUG=yCONFIG_PGTABLE_LEVELS=2 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not setCONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_CROSS_MEMORY_ATTACH=yCONFIG_FHANDLE=y
# CONFIG_USELIB is not setCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_SHOW_LEVEL=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not setCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_ARCH_HAS_TICK_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not setCONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not setCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=y
# CONFIG_TASKS_RCU is not setCONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not setCONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=16CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_NMI_LOG_BUF_SHIFT=13CONFIG_GENERIC_SCHED_CLOCK=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_SWAP_ENABLED=yCONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not setCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not setCONFIG_CGROUP_FREEZER=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=y
# CONFIG_USER_NS is not setCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_HAVE_UID16=yCONFIG_BPF=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not setCONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not setCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not setCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not setCONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_COMPAT_BRK=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_KEXEC_CORE=yCONFIG_OPROFILE=yCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_KRETPROBES=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_NMI=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_GENERIC_IDLE_POLL_SETUP=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_CLK=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_WANT_IPC_PARSE_VERSION=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=yCONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not setCONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not setCONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not setCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_MOD_ARCH_SPECIFIC=yCONFIG_MODULES_USE_ELF_REL=yCONFIG_ARCH_HAS_ELF_RANDOMIZE=yCONFIG_HAVE_ARCH_MMAP_RND_BITS=yCONFIG_HAVE_EXIT_THREAD=yCONFIG_ARCH_MMAP_RND_BITS_MIN=8CONFIG_ARCH_MMAP_RND_BITS_MAX=16CONFIG_ARCH_MMAP_RND_BITS=8
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not setCONFIG_CLONE_BACKWARDS=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not setCONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_FREEZER=y
#
# System Type
#CONFIG_MMU=yCONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#CONFIG_ARCH_MULTI_V6=yCONFIG_ARCH_MULTI_V7=yCONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_ASPEED is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not setCONFIG_ARCH_OMAP=y
#
# TI OMAP Common Features
#
#
# OMAP Feature Selections
#CONFIG_POWER_AVS_OMAP=y CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=yCONFIG_OMAP_MUX=yCONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_DM_TIMER=yCONFIG_OMAP_PM_NOOP=y CONFIG_MACH_OMAP_GENERIC=y
#
# TI OMAP/AM/DM/DRA Family
#CONFIG_ARCH_OMAP2=yCONFIG_ARCH_OMAP3=yCONFIG_ARCH_OMAP4=yCONFIG_SOC_OMAP5=yCONFIG_SOC_AM33XX=yCONFIG_SOC_AM43XX=yCONFIG_SOC_DRA7XX=yCONFIG_ARCH_OMAP2PLUS=yCONFIG_OMAP_INTERCONNECT_BARRIER=y
#
# TI OMAP2/3/4 Specific Features
#CONFIG_ARCH_OMAP2PLUS_TYPICAL=yCONFIG_SOC_HAS_OMAP2_SDRC=yCONFIG_SOC_HAS_REALTIME_COUNTER=y
#
# OMAP Core Type
#CONFIG_SOC_OMAP2420=yCONFIG_SOC_OMAP2430=yCONFIG_SOC_OMAP3430=yCONFIG_SOC_TI81XX=yCONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Legacy Platform Data Board Type
#CONFIG_MACH_OMAP2_TUSB6010=yCONFIG_MACH_OMAP3517EVM=yCONFIG_MACH_OMAP3_PANDORA=yCONFIG_MACH_NOKIA_N810=yCONFIG_MACH_NOKIA_N810_WIMAX=yCONFIG_MACH_NOKIA_N8X0=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_OMAP5_ERRATA_801819 is not set
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TANGO is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8750 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#CONFIG_CPU_V6=yCONFIG_CPU_V6K=yCONFIG_CPU_V7=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=yCONFIG_CPU_ABRT_EV6=yCONFIG_CPU_ABRT_EV7=yCONFIG_CPU_PABRT_V6=yCONFIG_CPU_PABRT_V7=yCONFIG_CPU_CACHE_V6=yCONFIG_CPU_CACHE_V7=yCONFIG_CPU_CACHE_VIPT=yCONFIG_CPU_COPY_V6=yCONFIG_CPU_TLB_V6=yCONFIG_CPU_TLB_V7=yCONFIG_CPU_HAS_ASID=yCONFIG_CPU_CP15=yCONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not setCONFIG_ARM_THUMB=yCONFIG_ARM_THUMBEE=yCONFIG_ARM_VIRT_EXT=yCONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not setCONFIG_KUSER_HELPERS=yCONFIG_VDSO=yCONFIG_DMA_CACHE_RWFO=yCONFIG_OUTER_CACHE=yCONFIG_OUTER_CACHE_SYNC=yCONFIG_MIGHT_HAVE_CACHE_L2X0=yCONFIG_CACHE_L2X0=y
# CONFIG_CACHE_L2X0_PMU is not setCONFIG_PL310_ERRATA_588369=yCONFIG_PL310_ERRATA_727915=y
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not setCONFIG_ARM_L1_CACHE_SHIFT_6=yCONFIG_ARM_L1_CACHE_SHIFT=6CONFIG_ARM_DMA_MEM_BUFFERABLE=yCONFIG_ARM_HEAVY_MB=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_ALIGN_RODATA=yCONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_326103 is not setCONFIG_ARM_ERRATA_411920=yCONFIG_ARM_ERRATA_430973=yCONFIG_ARM_ERRATA_643719=yCONFIG_ARM_ERRATA_720789=yCONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_364296 is not set
# CONFIG_ARM_ERRATA_764369 is not setCONFIG_ARM_ERRATA_775420=yCONFIG_ARM_ERRATA_798181=y
# CONFIG_ARM_ERRATA_773022 is not set
# CONFIG_ARM_ERRATA_818325_852422 is not set
# CONFIG_ARM_ERRATA_821420 is not set
# CONFIG_ARM_ERRATA_825619 is not set
# CONFIG_ARM_ERRATA_852421 is not set
# CONFIG_ARM_ERRATA_852423 is not set
#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#CONFIG_HAVE_SMP=yCONFIG_SMP=yCONFIG_SMP_ON_UP=yCONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not setCONFIG_HAVE_ARM_SCU=yCONFIG_HAVE_ARM_ARCH_TIMER=yCONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not setCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_NR_CPUS=2CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not setCONFIG_ARCH_NR_GPIO=512
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=yCONFIG_HZ_FIXED=0CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100CONFIG_SCHED_HRTICK=yCONFIG_ARM_PATCH_IDIV=yCONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not setCONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not setCONFIG_HAVE_ARCH_PFN_VALID=yCONFIG_HIGHMEM=yCONFIG_HIGHPTE=yCONFIG_CPU_SW_DOMAIN_PAN=yCONFIG_HW_PERF_EVENTS=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ARM_MODULE_PLTS is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_NO_BOOTMEM=yCONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_COMPACTION=yCONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_BOUNCE=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not setCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not setCONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not setCONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not setCONFIG_FRAME_VECTOR=yCONFIG_FORCE_MAX_ZONEORDER=12CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not setCONFIG_SECCOMP=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
#
# Boot options
#CONFIG_USE_OF=yCONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set CONFIG_ZBOOT_ROM_TEXT=0x0CONFIG_ZBOOT_ROM_BSS=0x0CONFIG_ARM_APPENDED_DTB=yCONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not setCONFIG_KEXEC=yCONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not setCONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#CONFIG_CPUFREQ_DT=mCONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set
#
# CPU Idle
#CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not setCONFIG_CPU_IDLE_GOV_MENU=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_CPUIDLE is not setCONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#CONFIG_VFP=y
CONFIG_VFPv3=yCONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set
#
# Userspace binary formats
#CONFIG_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=y
#
# Power management options
#CONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not setCONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not setCONFIG_PM_OPP=yCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not setCONFIG_CPU_PM=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARM_CPU_SUSPEND=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_NET=yCONFIG_NET_INGRESS=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not setCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not setCONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not setCONFIG_PHONET=m
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not setCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not setCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not setCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=y
# CONFIG_BPF_JIT is not setCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not setCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not setCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not setCONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_NET_DEVLINK is not setCONFIG_MAY_USE_DEVLINK=yCONFIG_HAVE_CBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER=yCONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_FW_LOADER_USER_HELPER=yCONFIG_FW_LOADER_USER_HELPER_FALLBACK=yCONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_SOC_BUS=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not setCONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#CONFIG_CMA_SIZE_MBYTES=32CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not setCONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
# CONFIG_ARM_CCI400_PMU is not set
# CONFIG_ARM_CCI5xx_PMU is not set
# CONFIG_ARM_CCN is not set
# CONFIG_BRCMSTB_GISB_ARB is not setCONFIG_OMAP_INTERCONNECT=yCONFIG_OMAP_OCP2SCP=y
# CONFIG_VEXPRESS_CONFIG is not setCONFIG_CONNECTOR=mCONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not setCONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not setCONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not setCONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not setCONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not setCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not setCONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not setCONFIG_MTD_M25P80=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not setCONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not setCONFIG_MTD_NAND=yCONFIG_MTD_NAND_BCH=yCONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI_DT is not set
# CONFIG_MTD_NAND_GPIO is not setCONFIG_MTD_NAND_OMAP2=yCONFIG_MTD_NAND_OMAP_BCH=yCONFIG_MTD_NAND_OMAP_BCH_BUILD=yCONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_MTK is not setCONFIG_MTD_ONENAND=yCONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not setCONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not setCONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_MT81xx_NOR is not setCONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_SPI_CADENCE_QUADSPI is not setCONFIG_MTD_UBI=yCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not setCONFIG_DTC=yCONFIG_OF=y
# CONFIG_OF_UNITTEST is not setCONFIG_OF_FLATTREE=yCONFIG_OF_EARLY_FLATTREE=yCONFIG_OF_DYNAMIC=yCONFIG_OF_ADDRESS=yCONFIG_OF_IRQ=yCONFIG_OF_NET=yCONFIG_OF_MDIO=yCONFIG_OF_RESERVED_MEM=yCONFIG_OF_RESOLVE=yCONFIG_OF_OVERLAY=yCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_NVME_TARGET is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not setCONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not setCONFIG_SRAM=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers #
#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not setCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not setCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_SATA_DWC is not set
#
# PATA SFF controllers with BMDMA
#
#
# PIO-only SFF controllers
#
# CONFIG_PATA_PLATFORM is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not setCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not setCONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not setCONFIG_DM9000=y
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_DNET is not setCONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not setCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not setCONFIG_KS8851=yCONFIG_KS8851_MLL=y
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not setCONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not setCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not setCONFIG_NET_VENDOR_SMSC=yCONFIG_SMC91X=y
# CONFIG_SMC911X is not setCONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
# CONFIG_NET_VENDOR_STMICRO is not setCONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not setCONFIG_NET_VENDOR_TI=yCONFIG_TI_DAVINCI_EMAC=yCONFIG_TI_DAVINCI_MDIO=yCONFIG_TI_DAVINCI_CPDMA=yCONFIG_TI_CPSW_PHY_SEL=yCONFIG_TI_CPSW_ALE=yCONFIG_TI_CPSW=yCONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not setCONFIG_PHYLIB=yCONFIG_SWPHY=y
#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_HISI_FEMAC is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not setCONFIG_AT803X_PHY=y
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not setCONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not setCONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=yCONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not setCONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not setCONFIG_USB_NET_SMSC75XX=mCONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not setCONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not setCONFIG_USB_NET_CDC_SUBSET_ENABLE=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not setCONFIG_USB_CDC_PHONET=m
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not setCONFIG_WLAN=yCONFIG_WLAN_VENDOR_ADMTEK=yCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_AT76C50X_USB is not setCONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not setCONFIG_WLAN_VENDOR_CISCO=yCONFIG_WLAN_VENDOR_INTEL=yCONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_P54_COMMON is not setCONFIG_WLAN_VENDOR_MARVELL=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_SPI is not setCONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
# CONFIG_LIBERTAS_THINFIRM is not setCONFIG_MWIFIEX=mCONFIG_MWIFIEX_USB=mCONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not setCONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8187 is not setCONFIG_RTL_CARDS=m
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not setCONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not setCONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not setCONFIG_WL12XX=mCONFIG_WL18XX=mCONFIG_WLCORE=mCONFIG_WLCORE_SPI=mCONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not setCONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not setCONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not setCONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not setCONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_OMAP4=mCONFIG_KEYBOARD_TWL4030=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_PROPERTIES=yCONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not setCONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not setCONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_TOUCHSCREEN_TI_AM335X_TSC=mCONFIG_TOUCHSCREEN_PIXCIR=y
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not setCONFIG_TOUCHSCREEN_TSC200X_CORE=m
# CONFIG_TOUCHSCREEN_TSC2004 is not setCONFIG_TOUCHSCREEN_TSC2005=mCONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not setCONFIG_INPUT_TPS65218_PWRBUTTON=mCONFIG_INPUT_TWL4030_PWRBUTTON=m
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not setCONFIG_INPUT_PALMAS_PWRBUTTON=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#CONFIG_SERIO=mCONFIG_SERIO_SERPORT=mCONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not setCONFIG_DEVMEM=yCONFIG_DEVKMEM=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=yCONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not setCONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not setCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=10CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=yCONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_RT288X is not setCONFIG_SERIAL_8250_OMAP=yCONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=yCONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_OMAP=mCONFIG_HW_RANDOM_OMAP3_ROM=m
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not setCONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not setCONFIG_SPI_OMAP24XX=yCONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #CONFIG_PINCTRL=y
#
# Pin controllers
#CONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not setCONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_PALMAS is not setCONFIG_ARCH_HAVE_CUSTOM_GPIO_H=yCONFIG_GPIOLIB=yCONFIG_OF_GPIO=yCONFIG_GPIOLIB_IRQCHIP=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not setCONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_ZX is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not setCONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not setCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
# CONFIG_GPIO_LP873X is not setCONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65910 is not setCONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not set
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
#
# SPI or I2C GPIO expanders
#
# CONFIG_GPIO_MCP23S08 is not set
#
# USB GPIO expanders
#
# CONFIG_W1 is not setCONFIG_POWER_AVS=yCONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_VERSATILE is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not setCONFIG_BATTERY_BQ27XXX=mCONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not setCONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not setCONFIG_CHARGER_BQ2415X=mCONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24257 is not setCONFIG_CHARGER_BQ24735=m
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65217 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not setCONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set CONFIG_THERMAL=mCONFIG_THERMAL_HWMON=yCONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
#
# Texas Instruments thermal drivers
#CONFIG_TI_SOC_THERMAL=mCONFIG_TI_THERMAL=y
# CONFIG_OMAP3_THERMAL is not setCONFIG_OMAP4_THERMAL=yCONFIG_OMAP5_THERMAL=yCONFIG_DRA752_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not setCONFIG_OMAP_WATCHDOG=mCONFIG_TWL4030_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not setCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not setCONFIG_MFD_OMAP_USB_HOST=yCONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not setCONFIG_MFD_TPS65217=yCONFIG_MFD_TI_LP873X=yCONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not setCONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not setCONFIG_TWL4030_CORE=yCONFIG_TWL4030_POWER=yCONFIG_MFD_TWL4030_AUDIO=yCONFIG_TWL6040_CORE=yCONFIG_MENELAUS=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not setCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not setCONFIG_REGULATOR_LP872X=yCONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MT6311 is not setCONFIG_REGULATOR_PALMAS=yCONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not setCONFIG_REGULATOR_TI_ABB=y
# CONFIG_REGULATOR_TPS51632 is not setCONFIG_REGULATOR_TPS62360=mCONFIG_REGULATOR_TPS65023=yCONFIG_REGULATOR_TPS6507X=yCONFIG_REGULATOR_TPS65217=yCONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6524X is not setCONFIG_REGULATOR_TPS65910=yCONFIG_REGULATOR_TWL4030=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not setCONFIG_MEDIA_RC_SUPPORT=yCONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not setCONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_SUBDEV_API=yCONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_V4L2_MEM2MEM_DEV=yCONFIG_VIDEOBUF2_CORE=yCONFIG_VIDEOBUF2_MEMOPS=yCONFIG_VIDEOBUF2_DMA_CONTIG=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#CONFIG_RC_CORE=yCONFIG_RC_MAP=yCONFIG_RC_DECODERS=yCONFIG_LIRC=mCONFIG_IR_LIRC_CODEC=mCONFIG_IR_NEC_DECODER=yCONFIG_IR_RC5_DECODER=yCONFIG_IR_RC6_DECODER=yCONFIG_IR_JVC_DECODER=yCONFIG_IR_SONY_DECODER=yCONFIG_IR_SANYO_DECODER=yCONFIG_IR_SHARP_DECODER=yCONFIG_IR_MCE_KBD_DECODER=yCONFIG_IR_XMP_DECODER=yCONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not setCONFIG_IR_RX51=m
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_MEDIA_USB_SUPPORT is not setCONFIG_V4L_PLATFORM_DRIVERS=yCONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not setCONFIG_VIDEO_AM437X_VPFE=y
# CONFIG_VIDEO_XILINX is not setCONFIG_VIDEO_TI_CAL=yCONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not setCONFIG_VIDEO_TI_VPE=y
# CONFIG_VIDEO_TI_VPE_DEBUG is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) #
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_IR_I2C=y
#
# I2C Encoders, decoders, sensors and other helper chips #
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not setCONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
#
# Camera sensor devices
#CONFIG_VIDEO_OV2659=y
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_S5C73M3 is not set
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_AS3645A is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
#
# Sensors used on soc_camera driver
#
#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
#
# Customise DVB Frontends
#CONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_TUNER_DIB0090=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#CONFIG_DRM=m
# CONFIG_DRM_DP_AUX_CHARDEV is not setCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not setCONFIG_DRM_GEM_CMA_HELPER=yCONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not setCONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_ARMADA is not setCONFIG_DRM_OMAP=mCONFIG_DRM_OMAP_NUM_CRTCS=2CONFIG_OMAP2_DSS_INIT=yCONFIG_OMAP2_DSS=m
# CONFIG_OMAP2_DSS_DEBUG is not setCONFIG_OMAP2_DSS_DEBUGFS=y
# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not setCONFIG_OMAP2_DSS_DPI=yCONFIG_OMAP2_DSS_VENC=yCONFIG_OMAP2_DSS_HDMI_COMMON=yCONFIG_OMAP4_DSS_HDMI=yCONFIG_OMAP5_DSS_HDMI=yCONFIG_OMAP2_DSS_SDI=yCONFIG_OMAP2_DSS_DSI=yCONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
#
# OMAPDRM External Display Device Drivers
#CONFIG_DRM_OMAP_ENCODER_OPA362=mCONFIG_DRM_OMAP_ENCODER_TFP410=mCONFIG_DRM_OMAP_ENCODER_TPD12S015=mCONFIG_DRM_OMAP_CONNECTOR_DVI=mCONFIG_DRM_OMAP_CONNECTOR_HDMI=mCONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=mCONFIG_DRM_OMAP_PANEL_DPI=mCONFIG_DRM_OMAP_PANEL_DSI_CM=mCONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=mCONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=mCONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=mCONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=mCONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=mCONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=mCONFIG_DRM_TILCDC=mCONFIG_DRM_TILCDC_SLAVE_COMPAT=y
# CONFIG_DRM_FSL_DCU is not setCONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_STI is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#CONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=mCONFIG_FB_CFB_COPYAREA=mCONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_UVESA=m
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not setCONFIG_FB_UDL=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_DA8XX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=mCONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_TPS65217 is not setCONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEOMODE_HELPERS=yCONFIG_HDMI=y
#
# Console display driver support
#CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_PCM_ELD=yCONFIG_SND_PCM_IEC958=yCONFIG_SND_DMAENGINE_PCM=yCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_PROC_FS=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not setCONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# HD-Audio
#CONFIG_SND_HDA_PREALLOC_SIZE=64CONFIG_SND_ARM=yCONFIG_SND_SPI=yCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not setCONFIG_SND_SOC=yCONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_ATMEL_SOC is not setCONFIG_SND_EDMA_SOC=y
# CONFIG_SND_DAVINCI_SOC_I2S is not setCONFIG_SND_DAVINCI_SOC_MCASP=yCONFIG_SND_DAVINCI_SOC_GENERIC_EVM=yCONFIG_SND_AM33XX_SOC_EVM=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not setCONFIG_SND_OMAP_SOC=yCONFIG_SND_OMAP_SOC_DMIC=mCONFIG_SND_OMAP_SOC_MCBSP=mCONFIG_SND_OMAP_SOC_MCPDM=m
# CONFIG_SND_OMAP_SOC_HDMI_AUDIO is not set
# CONFIG_SND_OMAP_SOC_N810 is not set
# CONFIG_SND_OMAP_SOC_RX51 is not set
# CONFIG_SND_OMAP_SOC_AM3517EVM is not setCONFIG_SND_OMAP_SOC_OMAP_TWL4030=mCONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=mCONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
# CONFIG_SND_SOC_IMG is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not setCONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not setCONFIG_SND_SOC_DMIC=mCONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5677_SPI is not set
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not setCONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_TS3A227E is not setCONFIG_SND_SOC_TWL4030=mCONFIG_SND_SOC_TWL6040=m
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_TPA6130A2 is not setCONFIG_SND_SIMPLE_CARD_UTILS=yCONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not setCONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# USB HID support
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not setCONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not setCONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=yCONFIG_USB_XHCI_PLATFORM=yCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_HCD_OMAP=m
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not setCONFIG_USB_DWC3=yCONFIG_USB_DWC3_HOST=y
#
# Platform Glue Driver Support
#CONFIG_USB_DWC3_OMAP=yCONFIG_USB_DWC3_OF_SIMPLE=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#CONFIG_USB_PHY=yCONFIG_NOP_USB_XCEIV=mCONFIG_AM335X_CONTROL_USB=mCONFIG_AM335X_PHY_USB=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not setCONFIG_USB_ULPI=yCONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=m
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not setCONFIG_LEDS_PCA963X=m
# CONFIG_LEDS_DAC124S085 is not setCONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not setCONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=mCONFIG_LEDS_TRIGGER_CPU=yCONFIG_LEDS_TRIGGER_GPIO=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_ACCESSIBILITY is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not setCONFIG_RTC_DRV_TWL92330=yCONFIG_RTC_DRV_TWL4030=mCONFIG_RTC_DRV_PALMAS=m
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#CONFIG_RTC_DRV_OMAP=m
# CONFIG_RTC_DRV_SNVS is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not setCONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#CONFIG_DMA_ENGINE=yCONFIG_DMA_VIRTUAL_CHANNELS=yCONFIG_DMA_OF=yCONFIG_DMA_OMAP=y
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not setCONFIG_TI_CPPI41=yCONFIG_TI_DMA_CROSSBAR=yCONFIG_TI_EDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not setCONFIG_CLKDEV_LOOKUP=yCONFIG_HAVE_CLK_PREPARE=yCONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not setCONFIG_CLK_TWL6040=m
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_NXP is not setCONFIG_COMMON_CLK_PALMAS=m
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not setCONFIG_COMMON_CLK_TI_ADPLL=y
#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
#
# Clock Source drivers
#CONFIG_CLKSRC_OF=yCONFIG_CLKSRC_PROBE=yCONFIG_CLKSRC_MMIO=yCONFIG_CLKSRC_TI_32K=yCONFIG_ARM_ARCH_TIMER=yCONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not setCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not setCONFIG_OF_IOMMU=yCONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set
#
# Remoteproc drivers
#
# CONFIG_OMAP_REMOTEPROC is not set
# CONFIG_STE_MODEM_RPROC is not set
# CONFIG_WKUP_M3_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not setCONFIG_EXTCON=y
#
# Extcon Device Drivers
#CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_MAX3355 is not setCONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not setCONFIG_EXTCON_USB_GPIO=yCONFIG_MEMORY=yCONFIG_TI_EMIF=mCONFIG_OMAP_GPMC=y
# CONFIG_OMAP_GPMC_DEBUG is not set
# CONFIG_IIO is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not setCONFIG_PWM_OMAP_DMTIMER=m
# CONFIG_PWM_PCA9685 is not setCONFIG_PWM_TIECAP=yCONFIG_PWM_TIEHRPWM=yCONFIG_PWM_TIPWMSS=yCONFIG_PWM_TWL=yCONFIG_PWM_TWL_LED=yCONFIG_IRQCHIP=yCONFIG_ARM_GIC=yCONFIG_ARM_GIC_MAX_NR=1CONFIG_OMAP_IRQCHIP=yCONFIG_IRQ_CROSSBAR=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#CONFIG_GENERIC_PHY=yCONFIG_PHY_DM816X_USB=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not setCONFIG_OMAP_CONTROL_PHY=yCONFIG_OMAP_USB2=yCONFIG_TI_PIPE3=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#CONFIG_ARM_PMU=y
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not setCONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not setCONFIG_HAVE_ARM_SMCCC=y
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=yCONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not setCONFIG_FILE_LOCKING=yCONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not setCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not setCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not setCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_JFFS2_FS=yCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not setCONFIG_JFFS2_SUMMARY=yCONFIG_JFFS2_FS_XATTR=yCONFIG_JFFS2_FS_POSIX_ACL=yCONFIG_JFFS2_FS_SECURITY=yCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not setCONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not setCONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_LOGFS is not setCONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V2=yCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not setCONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not setCONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not setCONFIG_GRACE_PERIOD=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not setCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_SECTION_MISMATCH_WARN_ONLY=yCONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_MAGIC_SYSRQ=yCONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not setCONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_PANIC_TIMEOUT=0CONFIG_SCHED_DEBUG=yCONFIG_SCHED_INFO=yCONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not setCONFIG_TIMER_STATS=yCONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not setCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not setCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not setCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not setCONFIG_PROBE_EVENTS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not setCONFIG_TRACING_EVENTS_GPIO=y
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not setCONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not setCONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not setCONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not setCONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not setCONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=yCONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not setCONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not setCONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=mCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_KPP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not setCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not setCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not setCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not setCONFIG_CRYPTO_SEQIV=mCONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not setCONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not setCONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not setCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not setCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_DRBG_MENU=mCONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not setCONFIG_CRYPTO_DRBG=mCONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_ARM_CRYPTO is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not setCONFIG_RATIONAL=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_ARCH_USE_CMPXCHG_LOCKREF=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not setCONFIG_CRC7=yCONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not setCONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=yCONFIG_XZ_DEC_ARM=yCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=yCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_XZ=yCONFIG_DECOMPRESS_LZO=yCONFIG_DECOMPRESS_LZ4=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_BCH=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_NLATTR=yCONFIG_GENERIC_ATOMIC64=y
# CONFIG_CORDIC is not setCONFIG_DDR=y
# CONFIG_IRQ_POLL is not setCONFIG_LIBFDT=yCONFIG_OID_REGISTRY=yCONFIG_SG_SPLIT=yCONFIG_SG_POOL=yCONFIG_ARCH_HAS_SG_CHAIN=yCONFIG_SBITMAP=y
# CONFIG_VIRTUALIZATION is not set
A message that is not in the archive (sent off-list or not yet received): c76fd922-9ac8-3b32-902a-7839a4817109-l0cyMroinI0@public.gmane.org
Quoted 27 lines · Tomi Valkeinen
Quoted 26 lines · Tony Lindgren
Quoted 24 lines · Tomi Valkeinen
Quoted 14 lines · Laurent Pinchart
Hi Tomi,
Quoted 11 lines · On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote:
Quoted 9 lines · Laurent Pinchart
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle whileactive
printed in a loop at boot time. I've traced
musb->is_activebeing set to 1 inmusb_start()withActually disabling
CONFIG_USB_MUSB_HDRCgets rid of the problem, quite understandably. It's not a fix though, just a workaround. Are you interested in investigating this ?Quoted 6 lines
Quoted 3 lines
I'm seeing this too. Did you manage to boot your Panda? If I disable
CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet doesn't work, and so my nfsroot doesn't mount.Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 is connected to the EHCI USB interface so it shouldn't depend on MUSB.
smsx95xx. I didn't look at it further, so possibly there's something else broken/changed that prevented the ethernet from working.
Quoted 6 lines
Quoted 3 lines
I have
omap2plus_defconfigwith initramfs work just fine for nfsroot and musb peripheral mode on pandaboard es. Well I have not tried it since last week with Linux next.Ok, I found the issue. I had to enable
CONFIG_NOP_USB_XCEIV. (themusb_bus_suspendissue is still there, though).
OK. And what changes to your current .config make the musb_bus_suspend() issues show up?
If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 5 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If CONFIG_USB_MUSB_HDRC is disabled, the musb error goes away.
Tomi
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.9.0-rc6 Kernel Configuration
#CONFIG_ARM=yCONFIG_ARM_HAS_SG_CHAIN=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_ARM_DMA_USE_IOMMU=y CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 CONFIG_MIGHT_HAVE_PCI=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_PROC_CPU=yCONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_BANDGAP=y CONFIG_FIX_EARLYCON_MEM=yCONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=yCONFIG_GENERIC_BUG=yCONFIG_PGTABLE_LEVELS=2 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not setCONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_CROSS_MEMORY_ATTACH=yCONFIG_FHANDLE=y
# CONFIG_USELIB is not setCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_SHOW_LEVEL=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not setCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_ARCH_HAS_TICK_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not setCONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not setCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=y
# CONFIG_TASKS_RCU is not setCONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not setCONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=16CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_NMI_LOG_BUF_SHIFT=13CONFIG_GENERIC_SCHED_CLOCK=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_SWAP_ENABLED=yCONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not setCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not setCONFIG_CGROUP_FREEZER=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=y
# CONFIG_USER_NS is not setCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_HAVE_UID16=yCONFIG_BPF=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not setCONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not setCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not setCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not setCONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_COMPAT_BRK=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_KEXEC_CORE=yCONFIG_OPROFILE=yCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_KRETPROBES=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_NMI=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_GENERIC_IDLE_POLL_SETUP=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_CLK=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_WANT_IPC_PARSE_VERSION=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=yCONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not setCONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not setCONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not setCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_MOD_ARCH_SPECIFIC=yCONFIG_MODULES_USE_ELF_REL=yCONFIG_ARCH_HAS_ELF_RANDOMIZE=yCONFIG_HAVE_ARCH_MMAP_RND_BITS=yCONFIG_HAVE_EXIT_THREAD=yCONFIG_ARCH_MMAP_RND_BITS_MIN=8CONFIG_ARCH_MMAP_RND_BITS_MAX=16CONFIG_ARCH_MMAP_RND_BITS=8
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not setCONFIG_CLONE_BACKWARDS=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not setCONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_FREEZER=y
#
# System Type
#CONFIG_MMU=yCONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#CONFIG_ARCH_MULTI_V6=yCONFIG_ARCH_MULTI_V7=yCONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_ASPEED is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not setCONFIG_ARCH_OMAP=y
#
# TI OMAP Common Features
#
#
# OMAP Feature Selections
#CONFIG_POWER_AVS_OMAP=y CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=yCONFIG_OMAP_MUX=yCONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_DM_TIMER=yCONFIG_OMAP_PM_NOOP=y CONFIG_MACH_OMAP_GENERIC=y
#
# TI OMAP/AM/DM/DRA Family
#CONFIG_ARCH_OMAP2=yCONFIG_ARCH_OMAP3=yCONFIG_ARCH_OMAP4=yCONFIG_SOC_OMAP5=yCONFIG_SOC_AM33XX=yCONFIG_SOC_AM43XX=yCONFIG_SOC_DRA7XX=yCONFIG_ARCH_OMAP2PLUS=yCONFIG_OMAP_INTERCONNECT_BARRIER=y
#
# TI OMAP2/3/4 Specific Features
#CONFIG_ARCH_OMAP2PLUS_TYPICAL=yCONFIG_SOC_HAS_OMAP2_SDRC=yCONFIG_SOC_HAS_REALTIME_COUNTER=y
#
# OMAP Core Type
#CONFIG_SOC_OMAP2420=yCONFIG_SOC_OMAP2430=yCONFIG_SOC_OMAP3430=yCONFIG_SOC_TI81XX=yCONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Legacy Platform Data Board Type
#CONFIG_MACH_OMAP2_TUSB6010=yCONFIG_MACH_OMAP3517EVM=yCONFIG_MACH_OMAP3_PANDORA=yCONFIG_MACH_NOKIA_N810=yCONFIG_MACH_NOKIA_N810_WIMAX=yCONFIG_MACH_NOKIA_N8X0=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_OMAP5_ERRATA_801819 is not set
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TANGO is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8750 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#CONFIG_CPU_V6=yCONFIG_CPU_V6K=yCONFIG_CPU_V7=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=yCONFIG_CPU_ABRT_EV6=yCONFIG_CPU_ABRT_EV7=yCONFIG_CPU_PABRT_V6=yCONFIG_CPU_PABRT_V7=yCONFIG_CPU_CACHE_V6=yCONFIG_CPU_CACHE_V7=yCONFIG_CPU_CACHE_VIPT=yCONFIG_CPU_COPY_V6=yCONFIG_CPU_TLB_V6=yCONFIG_CPU_TLB_V7=yCONFIG_CPU_HAS_ASID=yCONFIG_CPU_CP15=yCONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not setCONFIG_ARM_THUMB=yCONFIG_ARM_THUMBEE=yCONFIG_ARM_VIRT_EXT=yCONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not setCONFIG_KUSER_HELPERS=yCONFIG_VDSO=yCONFIG_DMA_CACHE_RWFO=yCONFIG_OUTER_CACHE=yCONFIG_OUTER_CACHE_SYNC=yCONFIG_MIGHT_HAVE_CACHE_L2X0=yCONFIG_CACHE_L2X0=y
# CONFIG_CACHE_L2X0_PMU is not setCONFIG_PL310_ERRATA_588369=yCONFIG_PL310_ERRATA_727915=y
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not setCONFIG_ARM_L1_CACHE_SHIFT_6=yCONFIG_ARM_L1_CACHE_SHIFT=6CONFIG_ARM_DMA_MEM_BUFFERABLE=yCONFIG_ARM_HEAVY_MB=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_ALIGN_RODATA=yCONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_326103 is not setCONFIG_ARM_ERRATA_411920=yCONFIG_ARM_ERRATA_430973=yCONFIG_ARM_ERRATA_643719=yCONFIG_ARM_ERRATA_720789=yCONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_364296 is not set
# CONFIG_ARM_ERRATA_764369 is not setCONFIG_ARM_ERRATA_775420=yCONFIG_ARM_ERRATA_798181=y
# CONFIG_ARM_ERRATA_773022 is not set
# CONFIG_ARM_ERRATA_818325_852422 is not set
# CONFIG_ARM_ERRATA_821420 is not set
# CONFIG_ARM_ERRATA_825619 is not set
# CONFIG_ARM_ERRATA_852421 is not set
# CONFIG_ARM_ERRATA_852423 is not set
#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#CONFIG_HAVE_SMP=yCONFIG_SMP=yCONFIG_SMP_ON_UP=yCONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not setCONFIG_HAVE_ARM_SCU=yCONFIG_HAVE_ARM_ARCH_TIMER=yCONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not setCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_NR_CPUS=2CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not setCONFIG_ARCH_NR_GPIO=512
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=yCONFIG_HZ_FIXED=0CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100CONFIG_SCHED_HRTICK=yCONFIG_ARM_PATCH_IDIV=yCONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not setCONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not setCONFIG_HAVE_ARCH_PFN_VALID=yCONFIG_HIGHMEM=yCONFIG_HIGHPTE=yCONFIG_CPU_SW_DOMAIN_PAN=yCONFIG_HW_PERF_EVENTS=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ARM_MODULE_PLTS is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_NO_BOOTMEM=yCONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_COMPACTION=yCONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_BOUNCE=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not setCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not setCONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not setCONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not setCONFIG_FRAME_VECTOR=yCONFIG_FORCE_MAX_ZONEORDER=12CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not setCONFIG_SECCOMP=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
#
# Boot options
#CONFIG_USE_OF=yCONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set CONFIG_ZBOOT_ROM_TEXT=0x0CONFIG_ZBOOT_ROM_BSS=0x0CONFIG_ARM_APPENDED_DTB=yCONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not setCONFIG_KEXEC=yCONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not setCONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#CONFIG_CPUFREQ_DT=mCONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set
#
# CPU Idle
#CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not setCONFIG_CPU_IDLE_GOV_MENU=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_CPUIDLE is not setCONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#CONFIG_VFP=y
CONFIG_VFPv3=yCONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set
#
# Userspace binary formats
#CONFIG_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=y
#
# Power management options
#CONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not setCONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not setCONFIG_PM_OPP=yCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not setCONFIG_CPU_PM=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARM_CPU_SUSPEND=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_NET=yCONFIG_NET_INGRESS=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not setCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not setCONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not setCONFIG_PHONET=m
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not setCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not setCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not setCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=y
# CONFIG_BPF_JIT is not setCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not setCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not setCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not setCONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_NET_DEVLINK is not setCONFIG_MAY_USE_DEVLINK=yCONFIG_HAVE_CBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER=yCONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_FW_LOADER_USER_HELPER=yCONFIG_FW_LOADER_USER_HELPER_FALLBACK=yCONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_SOC_BUS=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not setCONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#CONFIG_CMA_SIZE_MBYTES=32CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not setCONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
# CONFIG_ARM_CCI400_PMU is not set
# CONFIG_ARM_CCI5xx_PMU is not set
# CONFIG_ARM_CCN is not set
# CONFIG_BRCMSTB_GISB_ARB is not setCONFIG_OMAP_INTERCONNECT=yCONFIG_OMAP_OCP2SCP=y
# CONFIG_VEXPRESS_CONFIG is not setCONFIG_CONNECTOR=mCONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not setCONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not setCONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not setCONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not setCONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not setCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not setCONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not setCONFIG_MTD_M25P80=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not setCONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not setCONFIG_MTD_NAND=yCONFIG_MTD_NAND_BCH=yCONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI_DT is not set
# CONFIG_MTD_NAND_GPIO is not setCONFIG_MTD_NAND_OMAP2=yCONFIG_MTD_NAND_OMAP_BCH=yCONFIG_MTD_NAND_OMAP_BCH_BUILD=yCONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_MTK is not setCONFIG_MTD_ONENAND=yCONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not setCONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not setCONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_MT81xx_NOR is not setCONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_SPI_CADENCE_QUADSPI is not setCONFIG_MTD_UBI=yCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not setCONFIG_DTC=yCONFIG_OF=y
# CONFIG_OF_UNITTEST is not setCONFIG_OF_FLATTREE=yCONFIG_OF_EARLY_FLATTREE=yCONFIG_OF_DYNAMIC=yCONFIG_OF_ADDRESS=yCONFIG_OF_IRQ=yCONFIG_OF_NET=yCONFIG_OF_MDIO=yCONFIG_OF_RESERVED_MEM=yCONFIG_OF_RESOLVE=yCONFIG_OF_OVERLAY=yCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_NVME_TARGET is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not setCONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not setCONFIG_SRAM=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers #
#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not setCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not setCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_SATA_DWC is not set
#
# PATA SFF controllers with BMDMA
#
#
# PIO-only SFF controllers
#
# CONFIG_PATA_PLATFORM is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not setCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not setCONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not setCONFIG_DM9000=y
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_DNET is not setCONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not setCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not setCONFIG_KS8851=yCONFIG_KS8851_MLL=y
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not setCONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not setCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not setCONFIG_NET_VENDOR_SMSC=yCONFIG_SMC91X=y
# CONFIG_SMC911X is not setCONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
# CONFIG_NET_VENDOR_STMICRO is not setCONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not setCONFIG_NET_VENDOR_TI=yCONFIG_TI_DAVINCI_EMAC=yCONFIG_TI_DAVINCI_MDIO=yCONFIG_TI_DAVINCI_CPDMA=yCONFIG_TI_CPSW_PHY_SEL=yCONFIG_TI_CPSW_ALE=yCONFIG_TI_CPSW=yCONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not setCONFIG_PHYLIB=yCONFIG_SWPHY=y
#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_HISI_FEMAC is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not setCONFIG_AT803X_PHY=y
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not setCONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not setCONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=yCONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not setCONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not setCONFIG_USB_NET_SMSC75XX=mCONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not setCONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not setCONFIG_USB_NET_CDC_SUBSET_ENABLE=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not setCONFIG_USB_CDC_PHONET=m
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not setCONFIG_WLAN=yCONFIG_WLAN_VENDOR_ADMTEK=yCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_AT76C50X_USB is not setCONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not setCONFIG_WLAN_VENDOR_CISCO=yCONFIG_WLAN_VENDOR_INTEL=yCONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_P54_COMMON is not setCONFIG_WLAN_VENDOR_MARVELL=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_SPI is not setCONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
# CONFIG_LIBERTAS_THINFIRM is not setCONFIG_MWIFIEX=mCONFIG_MWIFIEX_USB=mCONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not setCONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8187 is not setCONFIG_RTL_CARDS=m
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not setCONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not setCONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not setCONFIG_WL12XX=mCONFIG_WL18XX=mCONFIG_WLCORE=mCONFIG_WLCORE_SPI=mCONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not setCONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not setCONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not setCONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not setCONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_OMAP4=mCONFIG_KEYBOARD_TWL4030=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_PROPERTIES=yCONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not setCONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not setCONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_TOUCHSCREEN_TI_AM335X_TSC=mCONFIG_TOUCHSCREEN_PIXCIR=y
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not setCONFIG_TOUCHSCREEN_TSC200X_CORE=m
# CONFIG_TOUCHSCREEN_TSC2004 is not setCONFIG_TOUCHSCREEN_TSC2005=mCONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not setCONFIG_INPUT_TPS65218_PWRBUTTON=mCONFIG_INPUT_TWL4030_PWRBUTTON=m
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not setCONFIG_INPUT_PALMAS_PWRBUTTON=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#CONFIG_SERIO=mCONFIG_SERIO_SERPORT=mCONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not setCONFIG_DEVMEM=yCONFIG_DEVKMEM=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=yCONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not setCONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not setCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=10CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=yCONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_RT288X is not setCONFIG_SERIAL_8250_OMAP=yCONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=yCONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_OMAP=mCONFIG_HW_RANDOM_OMAP3_ROM=m
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not setCONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not setCONFIG_SPI_OMAP24XX=yCONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #CONFIG_PINCTRL=y
#
# Pin controllers
#CONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not setCONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_PALMAS is not setCONFIG_ARCH_HAVE_CUSTOM_GPIO_H=yCONFIG_GPIOLIB=yCONFIG_OF_GPIO=yCONFIG_GPIOLIB_IRQCHIP=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not setCONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_ZX is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not setCONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not setCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
# CONFIG_GPIO_LP873X is not setCONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65910 is not setCONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not set
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
#
# SPI or I2C GPIO expanders
#
# CONFIG_GPIO_MCP23S08 is not set
#
# USB GPIO expanders
#
# CONFIG_W1 is not setCONFIG_POWER_AVS=yCONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_VERSATILE is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not setCONFIG_BATTERY_BQ27XXX=mCONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not setCONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not setCONFIG_CHARGER_BQ2415X=mCONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24257 is not setCONFIG_CHARGER_BQ24735=m
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65217 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not setCONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set CONFIG_THERMAL=mCONFIG_THERMAL_HWMON=yCONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
#
# Texas Instruments thermal drivers
#CONFIG_TI_SOC_THERMAL=mCONFIG_TI_THERMAL=y
# CONFIG_OMAP3_THERMAL is not setCONFIG_OMAP4_THERMAL=yCONFIG_OMAP5_THERMAL=yCONFIG_DRA752_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not setCONFIG_OMAP_WATCHDOG=mCONFIG_TWL4030_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not setCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not setCONFIG_MFD_OMAP_USB_HOST=yCONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not setCONFIG_MFD_TPS65217=yCONFIG_MFD_TI_LP873X=yCONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not setCONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not setCONFIG_TWL4030_CORE=yCONFIG_TWL4030_POWER=yCONFIG_MFD_TWL4030_AUDIO=yCONFIG_TWL6040_CORE=yCONFIG_MENELAUS=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not setCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not setCONFIG_REGULATOR_LP872X=yCONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MT6311 is not setCONFIG_REGULATOR_PALMAS=yCONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not setCONFIG_REGULATOR_TI_ABB=y
# CONFIG_REGULATOR_TPS51632 is not setCONFIG_REGULATOR_TPS62360=mCONFIG_REGULATOR_TPS65023=yCONFIG_REGULATOR_TPS6507X=yCONFIG_REGULATOR_TPS65217=yCONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6524X is not setCONFIG_REGULATOR_TPS65910=yCONFIG_REGULATOR_TWL4030=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not setCONFIG_MEDIA_RC_SUPPORT=yCONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not setCONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_SUBDEV_API=yCONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_V4L2_MEM2MEM_DEV=yCONFIG_VIDEOBUF2_CORE=yCONFIG_VIDEOBUF2_MEMOPS=yCONFIG_VIDEOBUF2_DMA_CONTIG=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#CONFIG_RC_CORE=yCONFIG_RC_MAP=yCONFIG_RC_DECODERS=yCONFIG_LIRC=mCONFIG_IR_LIRC_CODEC=mCONFIG_IR_NEC_DECODER=yCONFIG_IR_RC5_DECODER=yCONFIG_IR_RC6_DECODER=yCONFIG_IR_JVC_DECODER=yCONFIG_IR_SONY_DECODER=yCONFIG_IR_SANYO_DECODER=yCONFIG_IR_SHARP_DECODER=yCONFIG_IR_MCE_KBD_DECODER=yCONFIG_IR_XMP_DECODER=yCONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not setCONFIG_IR_RX51=m
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_MEDIA_USB_SUPPORT is not setCONFIG_V4L_PLATFORM_DRIVERS=yCONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not setCONFIG_VIDEO_AM437X_VPFE=y
# CONFIG_VIDEO_XILINX is not setCONFIG_VIDEO_TI_CAL=yCONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not setCONFIG_VIDEO_TI_VPE=y
# CONFIG_VIDEO_TI_VPE_DEBUG is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) #
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_IR_I2C=y
#
# I2C Encoders, decoders, sensors and other helper chips #
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not setCONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
#
# Camera sensor devices
#CONFIG_VIDEO_OV2659=y
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_S5C73M3 is not set
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_AS3645A is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
#
# Sensors used on soc_camera driver
#
#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
#
# Customise DVB Frontends
#CONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_TUNER_DIB0090=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#CONFIG_DRM=m
# CONFIG_DRM_DP_AUX_CHARDEV is not setCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not setCONFIG_DRM_GEM_CMA_HELPER=yCONFIG_DRM_KMS_CMA_HELPER=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not setCONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_ARMADA is not setCONFIG_DRM_OMAP=mCONFIG_DRM_OMAP_NUM_CRTCS=2CONFIG_OMAP2_DSS_INIT=yCONFIG_OMAP2_DSS=m
# CONFIG_OMAP2_DSS_DEBUG is not setCONFIG_OMAP2_DSS_DEBUGFS=y
# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not setCONFIG_OMAP2_DSS_DPI=yCONFIG_OMAP2_DSS_VENC=yCONFIG_OMAP2_DSS_HDMI_COMMON=yCONFIG_OMAP4_DSS_HDMI=yCONFIG_OMAP5_DSS_HDMI=yCONFIG_OMAP2_DSS_SDI=yCONFIG_OMAP2_DSS_DSI=yCONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
#
# OMAPDRM External Display Device Drivers
#CONFIG_DRM_OMAP_ENCODER_OPA362=mCONFIG_DRM_OMAP_ENCODER_TFP410=mCONFIG_DRM_OMAP_ENCODER_TPD12S015=mCONFIG_DRM_OMAP_CONNECTOR_DVI=mCONFIG_DRM_OMAP_CONNECTOR_HDMI=mCONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=mCONFIG_DRM_OMAP_PANEL_DPI=mCONFIG_DRM_OMAP_PANEL_DSI_CM=mCONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=mCONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=mCONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=mCONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=mCONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=mCONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=mCONFIG_DRM_TILCDC=mCONFIG_DRM_TILCDC_SLAVE_COMPAT=y
# CONFIG_DRM_FSL_DCU is not setCONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_STI is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
#CONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=mCONFIG_FB_CFB_COPYAREA=mCONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_UVESA=m
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not setCONFIG_FB_UDL=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_DA8XX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=mCONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_TPS65217 is not setCONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEOMODE_HELPERS=yCONFIG_HDMI=y
#
# Console display driver support
#CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_PCM_ELD=yCONFIG_SND_PCM_IEC958=yCONFIG_SND_DMAENGINE_PCM=yCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_PROC_FS=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not setCONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# HD-Audio
#CONFIG_SND_HDA_PREALLOC_SIZE=64CONFIG_SND_ARM=yCONFIG_SND_SPI=yCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not setCONFIG_SND_SOC=yCONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_ATMEL_SOC is not setCONFIG_SND_EDMA_SOC=y
# CONFIG_SND_DAVINCI_SOC_I2S is not setCONFIG_SND_DAVINCI_SOC_MCASP=yCONFIG_SND_DAVINCI_SOC_GENERIC_EVM=yCONFIG_SND_AM33XX_SOC_EVM=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not setCONFIG_SND_OMAP_SOC=yCONFIG_SND_OMAP_SOC_DMIC=mCONFIG_SND_OMAP_SOC_MCBSP=mCONFIG_SND_OMAP_SOC_MCPDM=m
# CONFIG_SND_OMAP_SOC_HDMI_AUDIO is not set
# CONFIG_SND_OMAP_SOC_N810 is not set
# CONFIG_SND_OMAP_SOC_RX51 is not set
# CONFIG_SND_OMAP_SOC_AM3517EVM is not setCONFIG_SND_OMAP_SOC_OMAP_TWL4030=mCONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=mCONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
# CONFIG_SND_SOC_IMG is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not setCONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not setCONFIG_SND_SOC_DMIC=mCONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5677_SPI is not set
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not setCONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_TS3A227E is not setCONFIG_SND_SOC_TWL4030=mCONFIG_SND_SOC_TWL6040=m
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_TPA6130A2 is not setCONFIG_SND_SIMPLE_CARD_UTILS=yCONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not setCONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# USB HID support
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not setCONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not setCONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=yCONFIG_USB_XHCI_PLATFORM=yCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_HCD_OMAP=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not setCONFIG_USB_MUSB_HDRC=yCONFIG_USB_MUSB_HOST=y
#
# Platform Glue Layer
#CONFIG_USB_MUSB_TUSB6010=mCONFIG_USB_MUSB_OMAP2PLUS=yCONFIG_USB_MUSB_AM35X=mCONFIG_USB_MUSB_DSPS=yCONFIG_USB_MUSB_AM335X_CHILD=y
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not setCONFIG_USB_INVENTRA_DMA=yCONFIG_USB_TI_CPPI41_DMA=yCONFIG_USB_DWC3=yCONFIG_USB_DWC3_HOST=y
#
# Platform Glue Driver Support
#CONFIG_USB_DWC3_OMAP=yCONFIG_USB_DWC3_OF_SIMPLE=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#CONFIG_USB_PHY=yCONFIG_NOP_USB_XCEIV=yCONFIG_AM335X_CONTROL_USB=mCONFIG_AM335X_PHY_USB=mCONFIG_TWL6030_USB=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not setCONFIG_USB_ULPI=yCONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=m
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not setCONFIG_LEDS_PCA963X=m
# CONFIG_LEDS_DAC124S085 is not setCONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not setCONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=mCONFIG_LEDS_TRIGGER_CPU=yCONFIG_LEDS_TRIGGER_GPIO=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_ACCESSIBILITY is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not setCONFIG_RTC_DRV_TWL92330=yCONFIG_RTC_DRV_TWL4030=mCONFIG_RTC_DRV_PALMAS=m
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#CONFIG_RTC_DRV_OMAP=m
# CONFIG_RTC_DRV_SNVS is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not setCONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#CONFIG_DMA_ENGINE=yCONFIG_DMA_VIRTUAL_CHANNELS=yCONFIG_DMA_OF=yCONFIG_DMA_OMAP=y
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not setCONFIG_TI_CPPI41=yCONFIG_TI_DMA_CROSSBAR=yCONFIG_TI_EDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not setCONFIG_CLKDEV_LOOKUP=yCONFIG_HAVE_CLK_PREPARE=yCONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not setCONFIG_CLK_TWL6040=m
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_NXP is not setCONFIG_COMMON_CLK_PALMAS=m
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not setCONFIG_COMMON_CLK_TI_ADPLL=y
#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
#
# Clock Source drivers
#CONFIG_CLKSRC_OF=yCONFIG_CLKSRC_PROBE=yCONFIG_CLKSRC_MMIO=yCONFIG_CLKSRC_TI_32K=yCONFIG_ARM_ARCH_TIMER=yCONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not setCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not setCONFIG_OF_IOMMU=yCONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set
#
# Remoteproc drivers
#
# CONFIG_OMAP_REMOTEPROC is not set
# CONFIG_STE_MODEM_RPROC is not set
# CONFIG_WKUP_M3_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not setCONFIG_EXTCON=y
#
# Extcon Device Drivers
#CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_MAX3355 is not setCONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not setCONFIG_EXTCON_USB_GPIO=yCONFIG_MEMORY=yCONFIG_TI_EMIF=mCONFIG_OMAP_GPMC=y
# CONFIG_OMAP_GPMC_DEBUG is not set
# CONFIG_IIO is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not setCONFIG_PWM_OMAP_DMTIMER=m
# CONFIG_PWM_PCA9685 is not setCONFIG_PWM_TIECAP=yCONFIG_PWM_TIEHRPWM=yCONFIG_PWM_TIPWMSS=yCONFIG_PWM_TWL=yCONFIG_PWM_TWL_LED=yCONFIG_IRQCHIP=yCONFIG_ARM_GIC=yCONFIG_ARM_GIC_MAX_NR=1CONFIG_OMAP_IRQCHIP=yCONFIG_IRQ_CROSSBAR=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#CONFIG_GENERIC_PHY=yCONFIG_PHY_DM816X_USB=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not setCONFIG_OMAP_CONTROL_PHY=yCONFIG_OMAP_USB2=yCONFIG_TI_PIPE3=yCONFIG_TWL4030_USB=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#CONFIG_ARM_PMU=y
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not setCONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not setCONFIG_HAVE_ARM_SMCCC=y
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=yCONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not setCONFIG_FILE_LOCKING=yCONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not setCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not setCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not setCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_JFFS2_FS=yCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not setCONFIG_JFFS2_SUMMARY=yCONFIG_JFFS2_FS_XATTR=yCONFIG_JFFS2_FS_POSIX_ACL=yCONFIG_JFFS2_FS_SECURITY=yCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not setCONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not setCONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_LOGFS is not setCONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V2=yCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not setCONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not setCONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not setCONFIG_GRACE_PERIOD=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not setCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_SECTION_MISMATCH_WARN_ONLY=yCONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_MAGIC_SYSRQ=yCONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not setCONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_PANIC_TIMEOUT=0CONFIG_SCHED_DEBUG=yCONFIG_SCHED_INFO=yCONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not setCONFIG_TIMER_STATS=yCONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not setCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not setCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not setCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not setCONFIG_PROBE_EVENTS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not setCONFIG_TRACING_EVENTS_GPIO=y
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not setCONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not setCONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not setCONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not setCONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not setCONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=yCONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not setCONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not setCONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=mCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_KPP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not setCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not setCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not setCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not setCONFIG_CRYPTO_SEQIV=mCONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not setCONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not setCONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not setCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not setCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_DRBG_MENU=mCONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not setCONFIG_CRYPTO_DRBG=mCONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_ARM_CRYPTO is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not setCONFIG_RATIONAL=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_ARCH_USE_CMPXCHG_LOCKREF=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not setCONFIG_CRC7=yCONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not setCONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=yCONFIG_XZ_DEC_ARM=yCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=yCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_XZ=yCONFIG_DECOMPRESS_LZO=yCONFIG_DECOMPRESS_LZ4=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_BCH=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_NLATTR=yCONFIG_GENERIC_ATOMIC64=y
# CONFIG_CORDIC is not setCONFIG_DDR=y
# CONFIG_IRQ_POLL is not setCONFIG_LIBFDT=yCONFIG_OID_REGISTRY=yCONFIG_SG_SPLIT=yCONFIG_SG_POOL=yCONFIG_ARCH_HAS_SG_CHAIN=yCONFIG_SBITMAP=y
# CONFIG_VIRTUALIZATION is not set
A message that is not in the archive (sent off-list or not yet received): 19526c30-5f18-337a-1e73-7f8965a778c1-l0cyMroinI0@public.gmane.org
Quoted 10 lines · Tomi Valkeinen
Quoted 5 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If
CONFIG_USB_MUSB_HDRCis disabled, the musb error goes away.
Maybe compare against omap2plus_defconfig? If you have musb set to host only mode it still tries to follow the ID pin from phy and do things on it's own. And ID pin is floating in B mode and with no cable connected.
AFAIK, the only sane configuration for musb is the OTG mode because the hardware tries to do things on it's own. And the host only mode only really works if phy has ID pin grounded or else the phy has to do trickery to rewrite the state to musb.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello,
Quoted 9 lines · On Wednesday 23 Nov 2016 18:40:09 Tomi Valkeinen wrote:
Quoted 5 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If
CONFIG_USB_MUSB_HDRCis disabled, the musb error goes away.
For what it's worth, that's exactly the same problem I experienced. See
https://www.spinics.net/lists/linux-usb/msg149172.html for an analysis.
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Laurent Pinchart
Hello,
Quoted 4 lines · On Wednesday 23 Nov 2016 18:40:09 Tomi Valkeinen wrote:
Quoted 3 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If
CONFIG_USB_MUSB_HDRCis disabled, the musb error goes away.For what it's worth, that's exactly the same problem I experienced. See
https://www.spinics.net/lists/linux-usb/msg149172.html for an analysis.
The problem is that with the built-in musb configuration we're trying to set USB-B cable to host mode with ID pin not grounded. That's not going to work on most hardware unless the PHY can configure the ID pin.
Here's how to fix the .config for built-in musb:
1. Change to have CONFIG_USB_GADGET=y
2. Then change CONFIG_USB_MUSB_DUAL_ROLE=y instead of CONFIG_USB_MUSB_HOST
We should probably get rid of CONFIG_USB_MUSB_HOST to avoid this.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Tony,
Quoted 19 lines · On Wednesday 07 Dec 2016 21:51:23 Tony Lindgren wrote:
Quoted 5 lines · Laurent Pinchart
Quoted 4 lines · On Wednesday 23 Nov 2016 18:40:09 Tomi Valkeinen wrote:
Quoted 3 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If
CONFIG_USB_MUSB_HDRCis disabled, the musb error goes away.For what it's worth, that's exactly the same problem I experienced. See
https://www.spinics.net/lists/linux-usb/msg149172.html for an analysis.The problem is that with the built-in musb configuration we're trying to set USB-B cable to host mode with ID pin not grounded. That's not going to work on most hardware unless the PHY can configure the ID pin.
Quoted 7 lines
Here's how to fix the .config for built-in musb:
1. Change to have
CONFIG_USB_GADGET=y2. Then change
CONFIG_USB_MUSB_DUAL_ROLE=yinstead ofCONFIG_USB_MUSB_HOSTWe should probably get rid of
CONFIG_USB_MUSB_HOSTto avoid this.
The reason I went for host mode is that I had to disable CONFIG_USB_GADGET as compiling it as a module prevents selecting CONFIG_NOP_USB_XCEIV=y, which is a dependency for CONFIG_USB_EHCI_HCD_OMAP=m.
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be
built-in
select USB_PHY
Signature · 8 lines
Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 26 lines · Laurent Pinchart
Hi Tony,
Quoted 23 lines · On Wednesday 07 Dec 2016 21:51:23 Tony Lindgren wrote:
Quoted 5 lines · Laurent Pinchart
Quoted 4 lines · On Wednesday 23 Nov 2016 18:40:09 Tomi Valkeinen wrote:
Quoted 3 lines · Tony Lindgren
OK. And what changes to your current .config make the
musb_bus_suspend()issues show up?Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
If it happens with USB-B cable from host to musb with musb set to host only mode I'm not suprised there are errors :)
I have no USB cables connected. I have attached my config. If
CONFIG_USB_MUSB_HDRCis disabled, the musb error goes away.For what it's worth, that's exactly the same problem I experienced. See
https://www.spinics.net/lists/linux-usb/msg149172.html for an analysis.The problem is that with the built-in musb configuration we're trying to set USB-B cable to host mode with ID pin not grounded. That's not going to work on most hardware unless the PHY can configure the ID pin.
Here's how to fix the .config for built-in musb:
1. Change to have
CONFIG_USB_GADGET=y
Quoted 7 lines
Quoted 3 lines
2. Then change
CONFIG_USB_MUSB_DUAL_ROLE=yinstead ofCONFIG_USB_MUSB_HOSTWe should probably get rid of
CONFIG_USB_MUSB_HOSTto avoid this.The reason I went for host mode is that I had to disable
CONFIG_USB_GADGETas compiling it as a module prevents selectingCONFIG_NOP_USB_XCEIV=y, which is a dependency forCONFIG_USB_EHCI_HCD_OMAP=m.
OK well like I said the CONFIG_USB_MUSB_HOST selection for a USB-B cable won't work from the hardware point of view. The only case where it works is if the PHY ID pin is grounded. Anything else will be flakey and won't prevent musb from attempting to change it's state on it's own.
Quoted 5 lines
config
NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
depends onUSB_GADGET|| !USB_GADGET # if USB_GADGET=m, NOP can't be
built-in
selectUSB_PHY
No idea why it's done that way..
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html