ALSA: add shell for Intel HDMI LPE audio driver
RFC PATCH v4 3/7 ALSA: add shell for Intel HDMI LPE audio driver
On Baytrail and Cherrytrail, HDaudio may be fused out or disabled by the BIOS. This driver enables an alternate path to the i915 display registers and DMA.
Although there is no hardware path between i915 display and LPE/SST audio clusters, this HDMI capability is referred to in the documentation as "HDMI LPE Audio" so we keep the name for consistency. There is no hardware path or control dependencies with the LPE/SST DSP functionality.
The hdmi-lpe-audio driver will be probed when the i915 driver creates a child platform device.
Since this driver is neither SoC nor PCI, a new x86 folder is added
Signed-off-by Pierre-Louis Bossart <[email protected]>
Signed-off-by Jerome Anand <[email protected]>
--- sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 16 + sound/x86/Makefile | 8 + sound/x86/intel_hdmi_lpe_audio.c | 622 +++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 692 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 1341 insertions(+), 1 deletion(-) create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
sound/Kconfig +2 -0
@@ -108,6 +108,8 @@ source "sound/parisc/Kconfig" source "sound/soc/Kconfig" +source "sound/x86/Kconfig" + endif # SND menuconfig SOUND_PRIME
sound/Makefile +1 -1
@@ -5,7 +5,7 @@ obj-$(CONFIG_SOUND) += soundcore.o obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ - firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ + firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ obj-$(CONFIG_SND_AOA) += aoa/ # This one must be compilable even if sound is configured out
sound/x86/Kconfig new file +16 -0
@@ -0,0 +1,16 @@ +menuconfig SND_X86 + tristate "X86 sound devices" + ---help--- + + X86 sound devices that don't fall under SoC or PCI categories + +if SND_X86 + +config HDMI_LPE_AUDIO + tristate "HDMI audio without HDaudio on Intel Atom platforms" + depends on DRM_I915 + default n + help + Choose this option to support HDMI LPE Audio mode + +endif # SND_X86
sound/x86/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +DRIVER_NAME := hdmi_lpe_audio + +ccflags-y += -Idrivers/gpu/drm/i915 + +$(DRIVER_NAME)-objs += \ + intel_hdmi_lpe_audio.o + +obj-$(CONFIG_HDMI_LPE_AUDIO) += $(DRIVER_NAME).o
sound/x86/intel_hdmi_lpe_audio.c new file +622 -0
622 lines not on this page · raw message
sound/x86/intel_hdmi_lpe_audio.h new file +692 -0
692 lines not on this page · raw message
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx