UBI: Fix typos
Subsystems (4)
PATCH 1/2 UBI: Fix typos
Signed-off-by Andrew F. Davis <[email protected]>
--- drivers/mtd/ubi/Kconfig | 2 +- drivers/mtd/ubi/io.c | 2 +- drivers/mtd/ubi/ubi.h | 3 +-- 3 files changed, 3 insertions(+), 4 deletions(-)
drivers/mtd/ubi/Kconfig +1 -1
@@ -2,7 +2,7 @@ menuconfig MTD_UBI tristate "Enable UBI - Unsorted block images" select CRC32 help - UBI is a software layer above MTD layer which admits of LVM-like + UBI is a software layer above MTD layer which admits use of LVM-like logical volumes on top of MTD devices, hides some complexities of flash chips like wear and bad blocks and provides some other useful capabilities. Please, consult the MTD web site for more details
drivers/mtd/ubi/io.c +1 -1
@@ -45,7 +45,7 @@* About minimal I/O units. In general, UBI assumes flash device model where * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1, * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the -* @ubi->mtd->writesize field. But as an exception, UBI admits of using another +* @ubi->mtd->writesize field. But as an exception, UBI admits use of another * (smaller) minimal I/O unit size for EC and VID headers to make it possible * to do different optimizations. *
drivers/mtd/ubi/ubi.h +1 -2
@@ -544,8 +544,7 @@ struct ubi_debug_info {* @vid_hdr_aloffset: starting offset of the VID header aligned to * @hdrs_min_io_size * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset -* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or -* not +* @bad_allowed: whether the MTD device admits bad physical eraseblocks or not * @nor_flash: non-zero if working on top of NOR flash * @max_write_size: maximum amount of bytes the underlying flash can write at a * time (MTD write buffer size)
Signature · 1 line
2.11.0
PATCH 2/2 net: phy: dp83848: Fix Typo
Signed-off-by Andrew F. Davis <[email protected]>
--- drivers/net/phy/dp83848.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/dp83848.c +1 -1
@@ -112,5 +112,5 @@ static struct phy_driver dp83848_driver[] = {module_phy_driver (dp83848_driver);MODULE_DESCRIPTION ("Texas Instruments DP83848 PHY driver" ); -MODULE_AUTHOR ("Andrew F. Davis <[email protected]" ); +MODULE_AUTHOR ("Andrew F. Davis <[email protected]>" );MODULE_LICENSE ("GPL" );
Signature · 1 line
2.11.0
Quoted 39 lines · Andrew F. Davis
Signed-off-by Andrew F. Davis <[email protected]>--- drivers/mtd/ubi/Kconfig | 2 +- drivers/mtd/ubi/io.c | 2 +- drivers/mtd/ubi/ubi.h | 3 +-- 3 files changed, 3 insertions(+), 4 deletions(-)drivers/mtd/ubi/Kconfig +1
-1@@ -2,7 +2,7 @@ menuconfig MTD_UBI tristate "Enable UBI - Unsorted block images" select CRC32 help - UBI is a software layer above MTD layer which admits of LVM-like + UBI is a software layer above MTD layer which admits use of LVM-like logical volumes on top of MTD devices, hides some complexities of flash chips like wear and bad blocks and provides some other useful capabilities. Please, consult the MTD web site for more detailsdrivers/mtd/ubi/io.c +1
-1@@ -45,7 +45,7 @@* About minimal I/O units. In general, UBI assumes flash device model where * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1, * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the -* @ubi->mtd->writesize field. But as an exception, UBI admits of using another +* @ubi->mtd->writesize field. But as an exception, UBI admits use of another * (smaller) minimal I/O unit size for EC and VID headers to make it possible * to do different optimizations. * drivers/mtd/ubi/ubi.h +0
-0
drivers/mtd/ubi/ubi.h struct ubi_debug_info { · line 550
Quoted 9 lines
drivers/mtd/ubi/ubi.h +1
-2@@ -544,8 +544,7 @@ struct ubi_debug_info {* @vid_hdr_aloffset: starting offset of the VID header aligned to * @hdrs_min_io_size * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset -* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or -* not +* @bad_allowed: whether the MTD device admits bad physical eraseblocks or not * @nor_flash: non-zero if working on top of NOR flash * @max_write_size: maximum amount of bytes the underlying flash can write at a * time (MTD write buffer size)
Ping? These still apply to v4.11-rc1, does anyone take these trivial patches anymore?