ASoC: sunxi: Add bindings for sun8i to SPDIF
Subsystems (3)
PATCH 1/1 ASoC: sunxi: Add bindings for sun8i to SPDIF
From: Marcus Cooper <[email protected]>
The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address.
--- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +1 -0
@@ -10,6 +10,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC + - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - reg : Offset and length of the register set for the device.
Signature · 1 line
2.11.0
Quoted 6 lines · On Thu, Jan 12, 2017 at 06:33:43PM +0100…
From: Marcus Cooper <[email protected]>
The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address.
Signed-off-by Marcus Cooper <[email protected]>
Signature · 3 lines
Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Mark Brown
maintainerQuoted 9 lines · On Thu, Jan 12, 2017 at 06:33:43PM +0100…
From: Marcus Cooper <[email protected]>
The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address.
Signed-off-by Marcus Cooper <[email protected]>--- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 + 1 file changed, 1 insertion(+)
This is fine but it doesn't actually add the compatible string to the driver which I'd expect.
Quoted 6 lines · Mark Brown
Quoted 5 lines · On Thu, Jan 12, 2017 at 06:33:43PM +0100…
From: Marcus Cooper <[email protected]>
The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address.
Quoted 7 lines
Quoted 4 lines
Signed-off-by Marcus Cooper <[email protected]>--- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 + 1 file changed, 1 insertion(+)This is fine but it doesn't actually add the compatible string to the driver which I'd expect.
Hi Mark,
I missed the binding documentation on the patch for the driver so I pushed it separately instead of pushing a new patch version. You can find it under the subject heading 'ASoC: sun4i-spdif: Add support for the H3 SoC' and Maxime has ACK it (on the condition that I add the binding doc).
BR,
CK
Quoted 5 lines
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] For more options, visit https://groups.google.com/d/optout.
Mark Brown
maintainerQuoted 5 lines · Code Kipper
I missed the binding documentation on the patch for the driver so I pushed it separately instead of pushing a new patch version. You can find it under the subject heading 'ASoC: sun4i-spdif: Add support for the H3 SoC' and Maxime has ACK it (on the condition that I add the binding doc).
I don't seem to have that patch. If Maxime said it needed changes for him to ack it there's every chance I just deleted it waiting for you to resend, it's certainly confusing to see a patch like this without the matching code.
Quoted 8 lines · Mark Brown
Quoted 5 lines · Code Kipper
I missed the binding documentation on the patch for the driver so I pushed it separately instead of pushing a new patch version. You can find it under the subject heading 'ASoC: sun4i-spdif: Add support for the H3 SoC' and Maxime has ACK it (on the condition that I add the binding doc).
Quoted 4 lines
I don't seem to have that patch. If Maxime said it needed changes for him to ack it there's every chance I just deleted it waiting for you to resend, it's certainly confusing to see a patch like this without the matching code.
No worries...I'll squash this patch into it and send as a V2. CK
Mark Brown
maintainerApplied "ASoC: sunxi: Add bindings for sun8i to SPDIF" to the asoc tree
In reply to [email protected]The patch
ASoC: sunxi: Add bindings for sun8i to SPDIF
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
cb5c978f9a56c459d5f13901efcfe44b97c4182dMon Sep 17 00:00:00 2001
From: Marcus Cooper <[email protected]>
Date: Thu, 19 Jan 2017 20:52:57 +0100
Subject: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF
The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address.
--- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +1 -0
@@ -10,6 +10,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC + - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - reg : Offset and length of the register set for the device.
Signature · 1 line
2.11.0