Use per-cpu allocator for !irq requests and prepare for a bulk allocator v4
Subsystems (2)
cover Use per-cpu allocator for !irq requests and prepare for a bulk allocator v4
For Vlastimil, this version passed a few tests with full debugging on without triggering the additional !in_interrupt() checks. The biggest change is patch 3 which avoids draining the per-cpu lists from IPI context.
Changelog since v3
o Debugging check in allocation path
o Make it harder to use the free path incorrectly
o Use preempt-safe stats counter
o Do not use IPIs to drain the per-cpu allocator
Changelog since v2
o Add ack's and benchmark data
o Rebase to 4.10-rc3
Changelog since v1
o Remove a scheduler point from the allocation path
o Finalise the bulk allocator and test it
This series is motivated by a conversation led by Jesper Dangaard Brouer at the last LSF/MM proposing a generic page pool for DMA-coherent pages. Part of his motivation was due to the overhead of allocating multiple order-0 that led some drivers to use high-order allocations and splitting them. This is very slow in some cases.
The first two patches in this series restructure the page allocator such that it is relatively easy to introduce an order-0 bulk page allocator. A patch exists to do that and has been handed over to Jesper until an in-kernel users is created. The third patch prevents the per-cpu allocator being drained from IPI context as that can potentially corrupt the list after patch four is merged. The final patch alters the per-cpu alloctor to make it exclusive to !irq requests. This cuts allocation/free overhead by roughly 30%.
Performance tests from both Jesper and I are included in the patch.
mm/page_alloc.c | 284 ++++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 181 insertions(+), 103 deletions(-)
Signature · 7 lines
2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 1/4 mm, page_alloc: Split buffered_rmqueue
buffered_rmqueue removes a page from a given zone and uses the per-cpu list for order-0. This is fine but a hypothetical caller that wanted multiple order-0 pages has to disable/reenable interrupts multiple times. This patch structures buffere_rmqueue such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change.
--- mm/page_alloc.c | 126 +++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 78 insertions(+), 48 deletions(-)
mm/page_alloc.c +78 -48
@@ -2602,73 +2602,103 @@ static inline void zone_statistics(struct zone *preferred_zone, struct zone *z)#endif } +/* Remove page from the per-cpu list, caller must protect the list */ +static struct page *__rmqueue_pcplist (struct zone *zone,int migratetype, +bool cold,struct per_cpu_pages *pcp, +struct list_head *list) +{ +struct page *page; + +do { +if (list_empty (list)) { + pcp->count +=rmqueue_bulk (zone,0 , + pcp->batch, list, + migratetype, cold); +if (unlikely (list_empty (list))) +return NULL ; + } + +if (cold) + page = list_last_entry(list, struct page, lru); +else + page = list_first_entry(list, struct page, lru); + +list_del (&page->lru); + pcp->count--; + }while (check_new_pcp (page)); + +return page; +} + +/* Lock and remove page from the per-cpu list */ +static struct page *rmqueue_pcplist (struct zone *preferred_zone, +struct zone *zone,unsigned int order, +gfp_t gfp_flags,int migratetype) +{ +struct per_cpu_pages *pcp; +struct list_head *list; +bool cold = ((gfp_flags & __GFP_COLD) !=0 ); +struct page *page; +unsigned long flags; + +local_irq_save (flags); + pcp = &this_cpu_ptr (zone->pageset)->pcp; + list = &pcp->lists[migratetype]; + page =__rmqueue_pcplist (zone, migratetype, cold, pcp, list); +if (page) { +__count_zid_vm_events (PGALLOC ,page_zonenum (page),1 << order); +zone_statistics (preferred_zone, zone, gfp_flags); + } +local_irq_restore (flags); +return page; +} +/* * Allocate a page from the given zone. Use pcplists for order-0 allocations. */ static inline -struct page *buffered_rmqueue (struct zone *preferred_zone, +struct page *rmqueue (struct zone *preferred_zone,struct zone *zone,unsigned int order,gfp_t gfp_flags,unsigned int alloc_flags,int migratetype) {unsigned long flags;struct page *page; -bool cold = ((gfp_flags & __GFP_COLD) !=0 );if (likely (order ==0 )) { -struct per_cpu_pages *pcp; -struct list_head *list; - -local_irq_save (flags); -do { - pcp = &this_cpu_ptr (zone->pageset)->pcp; - list = &pcp->lists[migratetype]; -if (list_empty (list)) { - pcp->count +=rmqueue_bulk (zone,0 , - pcp->batch, list, - migratetype, cold); -if (unlikely (list_empty (list))) - goto failed; - } - -if (cold) - page = list_last_entry(list, struct page, lru); -else - page = list_first_entry(list, struct page, lru); - -list_del (&page->lru); - pcp->count--; + page =rmqueue_pcplist (preferred_zone, zone, order, + gfp_flags, migratetype); + goto out; + } - }while (check_new_pcp (page)); - }else { -/* -* We most definitely don't want callers attempting to -* allocate greater than order-1 page units with __GFP_NOFAIL. -*/ -WARN_ON_ONCE ((gfp_flags & __GFP_NOFAIL) && (order >1 )); -spin_lock_irqsave (&zone->lock, flags); +/* +* We most definitely don't want callers attempting to +* allocate greater than order-1 page units with __GFP_NOFAIL. +*/ +WARN_ON_ONCE ((gfp_flags & __GFP_NOFAIL) && (order >1 )); +spin_lock_irqsave (&zone->lock, flags); -do { - page =NULL ; -if (alloc_flags &ALLOC_HARDER ) { - page =__rmqueue_smallest (zone, order,MIGRATE_HIGHATOMIC ); -if (page) -trace_mm_page_alloc_zone_locked (page, order, migratetype); - } -if (!page) - page =__rmqueue (zone, order, migratetype); - }while (page &&check_new_pages (page, order)); -spin_unlock (&zone->lock); +do { + page =NULL ; +if (alloc_flags &ALLOC_HARDER ) { + page =__rmqueue_smallest (zone, order,MIGRATE_HIGHATOMIC ); +if (page) +trace_mm_page_alloc_zone_locked (page, order, migratetype); + }if (!page) - goto failed; -__mod_zone_freepage_state (zone, -(1 << order), -get_pcppage_migratetype (page)); - } + page =__rmqueue (zone, order, migratetype); + }while (page &&check_new_pages (page, order)); +spin_unlock (&zone->lock); +if (!page) + goto failed; +__mod_zone_freepage_state (zone, -(1 << order), +get_pcppage_migratetype (page));__count_zid_vm_events (PGALLOC ,page_zonenum (page),1 << order);zone_statistics (preferred_zone, zone);local_irq_restore (flags); +out:VM_BUG_ON_PAGE (bad_range (zone, page), page);return page;
@@ -2974,7 +3004,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags, } try_this_zone: - page =buffered_rmqueue (ac->preferred_zoneref->zone, zone, order, + page =rmqueue (ac->preferred_zoneref->zone, zone, order, gfp_mask, alloc_flags, ac->migratetype);if (page) {prep_new_page (page, order, gfp_mask, alloc_flags);
Signature · 7 lines
2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 2/4 mm, page_alloc: Split alloc_pages_nodemask
In reply to Mel Gormanalloc_pages_nodemask does a number of preperation steps that determine what zones can be used for the allocation depending on a variety of factors. This is fine but a hypothetical caller that wanted multiple order-0 pages has to do the preparation steps multiple times. This patch structures __alloc_pages_nodemask such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change.
--- mm/page_alloc.c | 81 ++++++++++++++++++++++++++++++++++----------------------- 1 file changed, 49 insertions(+), 32 deletions(-)
mm/page_alloc.c +49 -32
@@ -3756,64 +3756,81 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,return page; } -/* -* This is the 'heart' of the zoned buddy allocator. -*/ -struct page * -__alloc_pages_nodemask (gfp_t gfp_mask,unsigned int order, -struct zonelist *zonelist,nodemask_t *nodemask) +static inline bool prepare_alloc_pages (gfp_t gfp_mask,unsigned int order, +struct zonelist *zonelist,nodemask_t *nodemask, +struct alloc_context *ac,gfp_t *alloc_mask, +unsigned int *alloc_flags) { -struct page *page; -unsigned int cpuset_mems_cookie; -unsigned int alloc_flags =ALLOC_WMARK_LOW ; -gfp_t alloc_mask = gfp_mask;/* The gfp_t that was actually used for allocation */ -struct alloc_context ac = { - .high_zoneidx =gfp_zone (gfp_mask), - .zonelist = zonelist, - .nodemask = nodemask, - .migratetype =gfpflags_to_migratetype (gfp_mask), - }; + ac->high_zoneidx =gfp_zone (gfp_mask); + ac->zonelist = zonelist; + ac->nodemask = nodemask; + ac->migratetype =gfpflags_to_migratetype (gfp_mask);if (cpusets_enabled ()) { - alloc_mask |= __GFP_HARDWALL; - alloc_flags |=ALLOC_CPUSET ; -if (!ac.nodemask) - ac.nodemask = &cpuset_current_mems_allowed; + *alloc_mask |= __GFP_HARDWALL; + *alloc_flags |=ALLOC_CPUSET ; +if (!ac->nodemask) + ac->nodemask = &cpuset_current_mems_allowed; } - gfp_mask &= gfp_allowed_mask; -lockdep_trace_alloc (gfp_mask);might_sleep_if (gfp_mask & __GFP_DIRECT_RECLAIM);if (should_fail_alloc_page (gfp_mask, order)) -return NULL ; +return false;/* * Check the zones suitable for the gfp_mask contain at least one * valid zone. It's possible to have an empty zonelist as a result * of __GFP_THISNODE and a memoryless node */ -if (unlikely (!zonelist->_zonerefs->zone)) -return NULL ; +if (unlikely (!ac->zonelist->_zonerefs->zone)) +return false; -if (IS_ENABLED (CONFIG_CMA ) && ac.migratetype ==MIGRATE_MOVABLE ) - alloc_flags |=ALLOC_CMA ; +if (IS_ENABLED (CONFIG_CMA ) && ac->migratetype ==MIGRATE_MOVABLE ) + *alloc_flags |=ALLOC_CMA ; -retry_cpuset: - cpuset_mems_cookie =read_mems_allowed_begin (); +return true; +} +/* Determine whether to spread dirty pages and what the first usable zone */ +static inline void finalise_ac (gfp_t gfp_mask, +unsigned int order,struct alloc_context *ac) +{/* Dirty zone balancing only done in the fast path */ - ac.spread_dirty_pages = (gfp_mask & __GFP_WRITE); + ac->spread_dirty_pages = (gfp_mask & __GFP_WRITE);/* * The preferred zone is used for statistics but crucially it is * also used as the starting point for the zonelist iterator. It * may get reset for allocations that ignore memory policies. */ - ac.preferred_zoneref =first_zones_zonelist (ac.zonelist, - ac.high_zoneidx, ac.nodemask); + ac->preferred_zoneref =first_zones_zonelist (ac->zonelist, + ac->high_zoneidx, ac->nodemask); +} + +/* +* This is the 'heart' of the zoned buddy allocator. +*/ +struct page * +__alloc_pages_nodemask (gfp_t gfp_mask,unsigned int order, +struct zonelist *zonelist,nodemask_t *nodemask) +{ +struct page *page; +unsigned int cpuset_mems_cookie; +unsigned int alloc_flags =ALLOC_WMARK_LOW ; +gfp_t alloc_mask = gfp_mask;/* The gfp_t that was actually used for allocation */ +struct alloc_context ac = { }; + + gfp_mask &= gfp_allowed_mask; +if (!prepare_alloc_pages (gfp_mask, order, zonelist, nodemask, &ac, &alloc_mask, &alloc_flags)) +return NULL ; + +retry_cpuset: + cpuset_mems_cookie =read_mems_allowed_begin (); + +finalise_ac (gfp_mask, order, &ac);if (!ac.preferred_zoneref) { page =NULL ; goto no_zone;
Signature · 7 lines
2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 3/4 mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanThe per-cpu page allocator can be drained immediately via drain_all_pages() which sends IPIs to every CPU. In the next patch, the per-cpu allocator will only be used for interrupt-safe allocations which prevents draining it from IPI context. This patch uses workqueues to drain the per-cpu lists instead.
This is slower but no slowdown during intensive reclaim was measured and the paths that use drain_all_pages() are not that sensitive to performance. This is particularly true as the path would only be triggered when reclaim is failing. It also makes a some sense to avoid storming a machine with IPIs when it's under memory pressure. Arguably, it should be further adjusted so that only one caller at a time is draining pages but it's beyond the scope of the current patch.
--- mm/page_alloc.c | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-)
mm/page_alloc.c +35 -7
@@ -2341,19 +2341,21 @@ void drain_local_pages(struct zone *zone)drain_pages (cpu); } +static void drain_local_pages_wq (struct work_struct *work) +{ +drain_local_pages (NULL ); +} +/* * Spill all the per-cpu pages from all CPUs back into the buddy allocator. * * When zone parameter is non-NULL, spill just the single zone's pages. * -* Note that this code is protected against sending an IPI to an offline -* CPU but does not guarantee sending an IPI to newly hotplugged CPUs: -* on_each_cpu_mask() blocks hotplug and won't talk to offlined CPUs but -* nothing keeps CPUs from showing up after we populated the cpumask and -* before the call to on_each_cpu_mask(). +* Note that this can be extremely slow as the draining happens in a workqueue. */ void drain_all_pages (struct zone *zone) { +struct work_struct __percpu *works;int cpu;/*
@@ -2362,6 +2364,16 @@ void drain_all_pages(struct zone *zone)*/ static cpumask_t cpus_with_pcps; +/* Workqueues cannot recurse */ +if (current->flags &PF_WQ_WORKER ) +return ; + +/* +* As this can be called from reclaim context, do not reenter reclaim. +* An allocation failure can be handled, it's simply slower +*/ + works = alloc_percpu_gfp(struct work_struct, GFP_ATOMIC); +/* * We don't care about racing with CPU hotplug event * as offline notification will cause the notified
@@ -2392,8 +2404,24 @@ void drain_all_pages(struct zone *zone)else cpumask_clear_cpu (cpu, &cpus_with_pcps); } -on_each_cpu_mask (&cpus_with_pcps, (smp_call_func_t ) drain_local_pages, - zone,1 ); + +if (works) { +for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (works, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work); + } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (works, cpu)); + }else { +for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct work; + +INIT_WORK (&work, drain_local_pages_wq); +schedule_work_on (cpu, &work); +flush_work (&work); + } + } }#ifdef CONFIG_HIBERNATION
Signature · 7 lines
2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 4/4 mm, page_alloc: Only use per-cpu allocator for irq-safe requests
In reply to Mel GormanMany workloads that allocate pages are not handling an interrupt at a time. As allocation requests may be from IRQ context, it's necessary to disable/enable IRQs for every page allocation. This cost is the bulk of the free path but also a significant percentage of the allocation path.
This patch alters the locking and checks such that only irq-safe allocation requests use the per-cpu allocator. All others acquire the irq-safe zone->lock and allocate from the buddy allocator. It relies on disabling preemption to safely access the per-cpu structures. It could be slightly modified to avoid soft IRQs using it but it's not clear it's worthwhile.
This modification may slow allocations from IRQ context slightly but the main gain from the per-cpu allocator is that it scales better for allocations from multiple contexts. There is an implicit assumption that intensive allocations from IRQ contexts on multiple CPUs from a single NUMA node are rare and that the fast majority of scaling issues are encountered in !IRQ contexts such as page faulting. It's worth noting that this patch is not required for a bulk page allocator but it significantly reduces the overhead.
The following is results from a page allocator micro-benchmark. Only order-0 is interesting as higher orders do not use the per-cpu allocator
4.10.0-rc2 4.10.0-rc2
vanilla irqsafe-v1r5
Amean alloc-odr0-1 287.15 ( 0.00%) 219.00 ( 23.73%)
Amean alloc-odr0-2 221.23 ( 0.00%) 183.23 ( 17.18%)
Amean alloc-odr0-4 187.00 ( 0.00%) 151.38 ( 19.05%)
Amean alloc-odr0-8 167.54 ( 0.00%) 132.77 ( 20.75%)
Amean alloc-odr0-16 156.00 ( 0.00%) 123.00 ( 21.15%)
Amean alloc-odr0-32 149.00 ( 0.00%) 118.31 ( 20.60%)
Amean alloc-odr0-64 138.77 ( 0.00%) 116.00 ( 16.41%)
Amean alloc-odr0-128 145.00 ( 0.00%) 118.00 ( 18.62%)
Amean alloc-odr0-256 136.15 ( 0.00%) 125.00 ( 8.19%)
Amean alloc-odr0-512 147.92 ( 0.00%) 121.77 ( 17.68%)
Amean alloc-odr0-1024 147.23 ( 0.00%) 126.15 ( 14.32%)
Amean alloc-odr0-2048 155.15 ( 0.00%) 129.92 ( 16.26%)
Amean alloc-odr0-4096 164.00 ( 0.00%) 136.77 ( 16.60%)
Amean alloc-odr0-8192 166.92 ( 0.00%) 138.08 ( 17.28%)
Amean alloc-odr0-16384 159.00 ( 0.00%) 138.00 ( 13.21%)
Amean free-odr0-1 165.00 ( 0.00%) 89.00 ( 46.06%)
Amean free-odr0-2 113.00 ( 0.00%) 63.00 ( 44.25%)
Amean free-odr0-4 99.00 ( 0.00%) 54.00 ( 45.45%)
Amean free-odr0-8 88.00 ( 0.00%) 47.38 ( 46.15%)
Amean free-odr0-16 83.00 ( 0.00%) 46.00 ( 44.58%)
Amean free-odr0-32 80.00 ( 0.00%) 44.38 ( 44.52%)
Amean free-odr0-64 72.62 ( 0.00%) 43.00 ( 40.78%)
Amean free-odr0-128 78.00 ( 0.00%) 42.00 ( 46.15%)
Amean free-odr0-256 80.46 ( 0.00%) 57.00 ( 29.16%)
Amean free-odr0-512 96.38 ( 0.00%) 64.69 ( 32.88%)
Amean free-odr0-1024 107.31 ( 0.00%) 72.54 ( 32.40%)
Amean free-odr0-2048 108.92 ( 0.00%) 78.08 ( 28.32%)
Amean free-odr0-4096 113.38 ( 0.00%) 82.23 ( 27.48%)
Amean free-odr0-8192 112.08 ( 0.00%) 82.85 ( 26.08%)
Amean free-odr0-16384 110.38 ( 0.00%) 81.92 ( 25.78%)
Amean total-odr0-1 452.15 ( 0.00%) 308.00 ( 31.88%)
Amean total-odr0-2 334.23 ( 0.00%) 246.23 ( 26.33%)
Amean total-odr0-4 286.00 ( 0.00%) 205.38 ( 28.19%)
Amean total-odr0-8 255.54 ( 0.00%) 180.15 ( 29.50%)
Amean total-odr0-16 239.00 ( 0.00%) 169.00 ( 29.29%)
Amean total-odr0-32 229.00 ( 0.00%) 162.69 ( 28.96%)
Amean total-odr0-64 211.38 ( 0.00%) 159.00 ( 24.78%)
Amean total-odr0-128 223.00 ( 0.00%) 160.00 ( 28.25%)
Amean total-odr0-256 216.62 ( 0.00%) 182.00 ( 15.98%)
Amean total-odr0-512 244.31 ( 0.00%) 186.46 ( 23.68%)
Amean total-odr0-1024 254.54 ( 0.00%) 198.69 ( 21.94%)
Amean total-odr0-2048 264.08 ( 0.00%) 208.00 ( 21.24%)
Amean total-odr0-4096 277.38 ( 0.00%) 219.00 ( 21.05%)
Amean total-odr0-8192 279.00 ( 0.00%) 220.92 ( 20.82%)
Amean total-odr0-16384 269.38 ( 0.00%) 219.92 ( 18.36%)This is the alloc, free and total overhead of allocating order-0 pages in batches of 1 page up to 16384 pages. Avoiding disabling/enabling overhead massively reduces overhead. Alloc overhead is roughly reduced by 14-20% in most cases. The free path is reduced by 26-46% and the total reduction is significant.
Many users require zeroing of pages from the page allocator which is the vast cost of allocation. Hence, the impact on a basic page faulting benchmark is not that significant
4.10.0-rc2 4.10.0-rc2
vanilla irqsafe-v1r5
Hmean page_test 656632.98 ( 0.00%) 675536.13 ( 2.88%)
Hmean brk_test 3845502.67 ( 0.00%) 3867186.94 ( 0.56%)
Stddev page_test 10543.29 ( 0.00%) 4104.07 ( 61.07%)
Stddev brk_test 33472.36 ( 0.00%) 15538.39 ( 53.58%)
CoeffVar page_test 1.61 ( 0.00%) 0.61 ( 62.15%)
CoeffVar brk_test 0.87 ( 0.00%) 0.40 ( 53.84%)
Max page_test 666513.33 ( 0.00%) 678640.00 ( 1.82%)
Max brk_test 3882800.00 ( 0.00%) 3887008.66 ( 0.11%)This is from aim9 and the most notable outcome is that fault variability is reduced by the patch. The headline improvement is small as the overall fault cost, zeroing, page table insertion etc dominate relative to disabling/enabling IRQs in the per-cpu allocator.
Similarly, little benefit was seen on networking benchmarks both localhost and between physical server/clients where other costs dominate. It's possible that this will only be noticable on very high speed networks.
Jesper Dangaard Brouer independently tested
this with a separate microbenchmark from
https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench
Micro-benchmarked with [1] page_bench02:
modprobe page_bench02 page_order=0 run_flags=$((2#010)) loops=$((10**8)); \
rmmod page_bench02 ; dmesg --notime | tail -n 4
Compared to baseline: 213 cycles(tsc) 53.417 ns
- against this : 184 cycles(tsc) 46.056 ns
- Saving : -29 cycles
- Very close to expected 27 cycles saving [see below [2]]
Micro benchmarking via time_bench_sample[3], we get the cost of these operations:
time_bench: Type:for_loop Per elem: 0 cycles(tsc) 0.232 ns (step:0)
time_bench: Type:spin_lock_unlock Per elem: 33 cycles(tsc) 8.334 ns (step:0)
time_bench: Type:spin_lock_unlock_irqsave Per elem: 62 cycles(tsc) 15.607 ns (step:0)
time_bench: Type:irqsave_before_lock Per elem: 57 cycles(tsc) 14.344 ns (step:0)
time_bench: Type:spin_lock_unlock_irq Per elem: 34 cycles(tsc) 8.560 ns (step:0)
time_bench: Type:simple_irq_disable_before_lock Per elem: 37 cycles(tsc) 9.289 ns (step:0)
time_bench: Type:local_BH_disable_enable Per elem: 19 cycles(tsc) 4.920 ns (step:0)
time_bench: Type:local_IRQ_disable_enable Per elem: 7 cycles(tsc) 1.864 ns (step:0)
time_bench: Type:local_irq_save_restore Per elem: 38 cycles(tsc) 9.665 ns (step:0)
[Mel's patch removes a ^^^^^^^^^^^^^^^^] ^^^^^^^^^ expected saving - preempt cost
time_bench: Type:preempt_disable_enable Per elem: 11 cycles(tsc) 2.794 ns (step:0)
[adds a preempt ^^^^^^^^^^^^^^^^^^^^^^] ^^^^^^^^^ adds this cost
time_bench: Type:funcion_call_cost Per elem: 6 cycles(tsc) 1.689 ns (step:0) time_bench: Type:func_ptr_call_cost Per elem: 11 cycles(tsc) 2.767 ns (step:0) time_bench: Type:page_alloc_put Per elem: 211 cycles(tsc) 52.803 ns (step:0)
Thus, expected improvement is: 38-11 = 27 cycles.
--- mm/page_alloc.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-)
mm/page_alloc.c +22 -19
@@ -1087,10 +1087,10 @@ static void free_pcppages_bulk(struct zone *zone, int count, {int migratetype =0 ;int batch_free =0 ; -unsigned long nr_scanned; +unsigned long nr_scanned, flags;bool isolated_pageblocks; -spin_lock (&zone->lock); +spin_lock_irqsave (&zone->lock, flags); isolated_pageblocks =has_isolate_pageblock (zone); nr_scanned =node_page_state (zone->zone_pgdat,NR_PAGES_SCANNED );if (nr_scanned)
@@ -1139,7 +1139,7 @@ static void free_pcppages_bulk(struct zone *zone, int count,trace_mm_page_pcpu_drain (page,0 , mt); }while (--count && --batch_free && !list_empty (list)); } -spin_unlock (&zone->lock); +spin_unlock_irqrestore (&zone->lock, flags); } static void free_one_page(struct zone *zone,
@@ -1147,8 +1147,8 @@ static void free_one_page(struct zone *zone, unsigned int order, int migratetype) { -unsigned long nr_scanned; -spin_lock (&zone->lock); +unsigned long nr_scanned, flags; +spin_lock_irqsave (&zone->lock, flags); nr_scanned =node_page_state (zone->zone_pgdat,NR_PAGES_SCANNED );if (nr_scanned)__mod_node_page_state (zone->zone_pgdat,NR_PAGES_SCANNED , -nr_scanned);
@@ -1158,7 +1158,7 @@ static void free_one_page(struct zone *zone, migratetype =get_pfnblock_migratetype (page, pfn); }__free_one_page (page, pfn, zone, order, migratetype); -spin_unlock (&zone->lock); +spin_unlock_irqrestore (&zone->lock, flags); } static void __meminit __init_single_page(struct page *page, unsigned long pfn,
@@ -1236,7 +1236,6 @@ void __meminit reserve_bootmem_region(phys_addr_t start, phys_addr_t end)static void __free_pages_ok (struct page *page,unsigned int order) { -unsigned long flags;int migratetype;unsigned long pfn =page_to_pfn (page);
@@ -1244,10 +1243,8 @@ static void __free_pages_ok(struct page *page, unsigned int order)return ; migratetype =get_pfnblock_migratetype (page, pfn); -local_irq_save (flags); -__count_vm_events (PGFREE ,1 << order); +count_vm_events (PGFREE ,1 << order);free_one_page (page_zone (page), page, pfn, order, migratetype); -local_irq_restore (flags); }static void __init __free_pages_boot_core (struct page *page,unsigned int order)
@@ -2219,8 +2216,9 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, int migratetype, bool cold) { int i, alloced = 0; +unsigned long flags; -spin_lock (&zone->lock); +spin_lock_irqsave (&zone->lock, flags);for (i =0 ; i < count; ++i) {struct page *page =__rmqueue (zone, order, migratetype);if (unlikely (page ==NULL ))
@@ -2256,7 +2254,7 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order,* pages added to the pcp list. */ __mod_zone_page_state (zone,NR_FREE_PAGES , -(i << order)); -spin_unlock (&zone->lock); +spin_unlock_irqrestore (&zone->lock, flags);return alloced; }
@@ -2472,16 +2470,20 @@ void free_hot_cold_page(struct page *page, bool cold) {struct zone *zone =page_zone (page);struct per_cpu_pages *pcp; -unsigned long flags;unsigned long pfn =page_to_pfn (page);int migratetype;if (!free_pcp_prepare (page))return ; +if (in_interrupt ()) { +__free_pages_ok (page,0 ); +return ; + } + migratetype =get_pfnblock_migratetype (page, pfn);set_pcppage_migratetype (page, migratetype); -local_irq_save (flags); +preempt_disable ();__count_vm_event (PGFREE );/*
@@ -2512,7 +2514,7 @@ void free_hot_cold_page(struct page *page, bool cold) } out: -local_irq_restore (flags); +preempt_enable_no_resched (); }/*
@@ -2637,6 +2639,8 @@ static struct page *__rmqueue_pcplist(struct zone *zone, int migratetype, { struct page *page; + VM_BUG_ON(in_interrupt()); + do { if (list_empty(list)) { pcp->count += rmqueue_bulk(zone, 0,
@@ -2667,9 +2671,8 @@ static struct page *rmqueue_pcplist(struct zone *preferred_zone,struct list_head *list;bool cold = ((gfp_flags & __GFP_COLD) !=0 );struct page *page; -unsigned long flags; -local_irq_save (flags); +preempt_disable (); pcp = &this_cpu_ptr (zone->pageset)->pcp; list = &pcp->lists[migratetype]; page =__rmqueue_pcplist (zone, migratetype, cold, pcp, list);
@@ -2677,7 +2680,7 @@ static struct page *rmqueue_pcplist(struct zone *preferred_zone,__count_zid_vm_events (PGALLOC ,page_zonenum (page),1 << order);zone_statistics (preferred_zone, zone, gfp_flags); } -local_irq_restore (flags); +preempt_enable_no_resched ();return page; }
@@ -2693,7 +2696,7 @@ struct page *rmqueue(struct zone *preferred_zone,unsigned long flags;struct page *page; -if (likely (order ==0 )) { +if (likely (order ==0 ) && !in_interrupt ()) { page =rmqueue_pcplist (preferred_zone, zone, order, gfp_flags, migratetype); goto out;
Signature · 7 lines
2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 1/4] mm, page_alloc: Split buffered_rmqueue
In reply to Mel GormanQuoted 8 lines · On Tue, 17 Jan 2017 09:29:51 +0000 Mel Gorman <[email protected]>…
mm/page_alloc.c +8
-0+/* Lock and remove page from the per-cpu list */ +static struct page *rmqueue_pcplist (struct zone *preferred_zone, +struct zone *zone,unsigned int order, +gfp_t gfp_flags,int migratetype) +{ +struct per_cpu_pages *pcp; +struct list_head *list; +bool cold = ((gfp_flags & __GFP_COLD) !=0 );
mm/page_alloc.c static inline void zone_statistics(struct zone *preferred_zone, struct zone *z) · line 2650
Quoted 10 lines
mm/page_alloc.c +10
-0+struct page *page; +unsigned long flags; + +local_irq_save (flags); + pcp = &this_cpu_ptr (zone->pageset)->pcp; + list = &pcp->lists[migratetype]; + page =__rmqueue_pcplist (zone, migratetype, cold, pcp, list); +if (page) { +__count_zid_vm_events (PGALLOC ,page_zonenum (page),1 << order); +zone_statistics (preferred_zone, zone, gfp_flags);
Word-of-warning: The zone_statistics() call changed number of parameters in commit 41b6167e8f74 ("mm: get rid of __GFP_OTHER_NODE"). (Not sure what tree you are based on)
Quoted 4 lines
mm/page_alloc.c +4
-0+ } +local_irq_restore (flags); +return page; +}
Signature · 10 lines
Best regards, Jesper Dangaard Brouer MSc.CS, Principal Kernel Engineer at Red Hat LinkedIn: http://www.linkedin.com/in/brouer -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 1/4] mm, page_alloc: Split buffered_rmqueue
Quoted 17 lines · Jesper Dangaard Brouer
Quoted 14 lines · On Tue, 17 Jan 2017 09:29:51 +0000 Mel Gorman <[email protected]>…
mm/page_alloc.c +14
-0+/* Lock and remove page from the per-cpu list */ +static struct page *rmqueue_pcplist (struct zone *preferred_zone, +struct zone *zone,unsigned int order, +gfp_t gfp_flags,int migratetype) +{ +struct per_cpu_pages *pcp; +struct list_head *list; +bool cold = ((gfp_flags & __GFP_COLD) !=0 ); +struct page *page; +unsigned long flags; + +local_irq_save (flags); + pcp = &this_cpu_ptr (zone->pageset)->pcp; + list = &pcp->lists[migratetype];
Quoted 8 lines
mm/page_alloc.c static inline void zone_statistics(struct zone *preferred_zone, struct zone *z) · line 2650
Quoted 4 lines
mm/page_alloc.c +4
-0+ page =__rmqueue_pcplist (zone, migratetype, cold, pcp, list); +if (page) { +__count_zid_vm_events (PGALLOC ,page_zonenum (page),1 << order); +zone_statistics (preferred_zone, zone, gfp_flags);Word-of-warning: The
zone_statistics()call changed number of parameters in commit41b6167e8f74("mm: get rid of__GFP_OTHER_NODE"). (Not sure what tree you are based on)
Yeah and there will likely be more conflicts with fixes wrt the "getting oom/stalls for ltp test cpuset01 with latest/4.9 kernela??" thread, hopefully tomorrow.
Quoted 6 lines
mm/page_alloc.c static inline void zone_statistics(struct zone *preferred_zone, struct zone *z) · line 2654
Quoted 4 lines
mm/page_alloc.c +4
-0+ } +local_irq_restore (flags); +return page; +}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 1/4] mm, page_alloc: Split buffered_rmqueue
Quoted 18 lines · Vlastimil Babka
Quoted 17 lines · Jesper Dangaard Brouer
Quoted 14 lines · On Tue, 17 Jan 2017 09:29:51 +0000 Mel Gorman <[email protected]>…
(quoted diff) +14
-0+/* Lock and remove page from the per-cpu list */ +static struct page *rmqueue_pcplist(struct zone *preferred_zone, + struct zone *zone, unsigned int order, + gfp_t gfp_flags, int migratetype) +{ + struct per_cpu_pages *pcp; + struct list_head *list; + bool cold = ((gfp_flags & __GFP_COLD) != 0); + struct page *page; + unsigned long flags; + + local_irq_save(flags); + pcp = &this_cpu_ptr(zone->pageset)->pcp; + list = &pcp->lists[migratetype];
Quoted 9 lines
Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ page = __rmqueue_pcplist(zone, migratetype, cold, pcp, list); + if (page) { + __count_zid_vm_events(PGALLOC, page_zonenum(page), 1 << order); + zone_statistics(preferred_zone, zone, gfp_flags);Word-of-warning: The
zone_statistics()call changed number of parameters in commit41b6167e8f74("mm: get rid of__GFP_OTHER_NODE"). (Not sure what tree you are based on)
Yes, there's a conflict. The fix is trivial and shouldn't affect the overall series. Not that it matters because of ths next part
Quoted 4 lines
Yeah and there will likely be more conflicts with fixes wrt the "getting oom/stalls for ltp test cpuset01 with latest/4.9 kernel???" thread, hopefully tomorrow.
It's was on my list to look closer at that thread tomorrow. I only took a quick look for the first time a few minutes ago and it looks bad. There is at least a flaw in the retry sequence if cpusets are disabled during an allocation that fails as it won't retry. That leaves a small window if the last cpuset disappeared during which an allocation could artifically fail but that can't be what's going on here.
It could still be the retry logic because the nodemask is not necessarily synced up with cpuset_current_mems_allowed. I'll try reproducing this in the morning. The fix is almost certainly going to conflict with this series but this series can wait until after that gets resolved and I'll rebase on top of mmotm.
It's late so I'm fairly tired but assuming I can reproduce this in the morning, the first thing I'll try is something like this to force a reread of mems_allowed;
mm/page_alloc.c +7 -7
@@ -3774,13 +3774,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, .migratetype = gfpflags_to_migratetype(gfp_mask), }; -if (cpusets_enabled ()) { - alloc_mask |= __GFP_HARDWALL; - alloc_flags |=ALLOC_CPUSET ; -if (!ac.nodemask) - ac.nodemask = &cpuset_current_mems_allowed; - } - gfp_mask &= gfp_allowed_mask;lockdep_trace_alloc (gfp_mask);
@@ -3802,6 +3795,13 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, alloc_flags |=ALLOC_CMA ; retry_cpuset: +if (cpusets_enabled ()) { + alloc_mask |= __GFP_HARDWALL; + alloc_flags |=ALLOC_CPUSET ; +if (!nodemask) + ac.nodemask = &cpuset_current_mems_allowed; + } + cpuset_mems_cookie =read_mems_allowed_begin ();/* Dirty zone balancing only done in the fast path */
If that doesn't work out then I'll start kicking the problem properly unless you've beaten me to the correct solution already :)
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 1/4] mm, page_alloc: Split buffered_rmqueue
Quoted 27 lines · Mel Gorman
It's late so I'm fairly tired but assuming I can reproduce this in the morning, the first thing I'll try is something like this to force a reread of
mems_allowed;mm/page_alloc.c +0
-7@@ -3774,13 +3774,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, .migratetype = gfpflags_to_migratetype(gfp_mask), }; -if (cpusets_enabled ()) { - alloc_mask |= __GFP_HARDWALL; - alloc_flags |=ALLOC_CPUSET ; -if (!ac.nodemask) - ac.nodemask = &cpuset_current_mems_allowed; - } - gfp_mask &= gfp_allowed_mask;lockdep_trace_alloc (gfp_mask);@@ -3802,6 +3795,13 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, alloc_flags |=ALLOC_CMA ; retry_cpuset:
mm/page_alloc.c __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, · line 3807
Quoted 10 lines
mm/page_alloc.c +7
-0+if (cpusets_enabled ()) { + alloc_mask |= __GFP_HARDWALL; + alloc_flags |=ALLOC_CPUSET ; +if (!nodemask) + ac.nodemask = &cpuset_current_mems_allowed; + } + cpuset_mems_cookie =read_mems_allowed_begin ();/* Dirty zone balancing only done in the fast path */
I later recalled that we looked at this before and didn't think a reinit was necessary because the location of cpuset_current_mems_allowed doesn't change so I came back and took another look. The location doesn't change but after the first attempt, we reset ac.nodemask to the given nodemask and don't recheck current_mems_allowed if the cpuset changed. The application of memory policies versus cpusets is a mess so it'll take time to pick apart to see if this is even remotely in the right direction.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 1/4] mm, page_alloc: Split buffered_rmqueue
Quoted 9 lines · Mel Gorman
On Tue, Jan 17, 2017 at 08:20:08PM +0000, Mel Gorman wrote:
I later recalled that we looked at this before and didn't think a reinit was necessary because the location of
cpuset_current_mems_alloweddoesn't change so I came back and took another look. The location doesn't change but after the first attempt, we reset ac.nodemask to the given nodemask and don't recheckcurrent_mems_allowedif the cpuset changed. The application of memory policies versus cpusets is a mess so it'll take time to pick apart to see if this is even remotely in the right direction.
Yes, I spent most of last 2 days untangling this, so I'll post at least some RFC soon.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanQuoted 14 lines · Mel Gorman
The per-cpu page allocator can be drained immediately via
drain_all_pages()which sends IPIs to every CPU. In the next patch, the per-cpu allocator will only be used for interrupt-safe allocations which prevents draining it from IPI context. This patch uses workqueues to drain the per-cpu lists instead.This is slower but no slowdown during intensive reclaim was measured and the paths that use
drain_all_pages()are not that sensitive to performance. This is particularly true as the path would only be triggered when reclaim is failing. It also makes a some sense to avoid storming a machine with IPIs when it's under memory pressure. Arguably, it should be further adjusted so that only one caller at a time is draining pages but it's beyond the scope of the current patch.
Quoted 1 line
Signed-off-by Mel Gorman <[email protected]>
I'm not a workqueue expert (CC Petr Mladek) but I compared this to lru_add_drain_all() and have some questions...
Quoted 54 lines
--- mm/page_alloc.c | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-)mm/page_alloc.c +17
-5@@ -2341,19 +2341,21 @@ void drain_local_pages(struct zone *zone)drain_pages (cpu); } +static void drain_local_pages_wq (struct work_struct *work) +{ +drain_local_pages (NULL ); +} +/* * Spill all the per-cpu pages from all CPUs back into the buddy allocator. * * When zone parameter is non-NULL, spill just the single zone's pages. * -* Note that this code is protected against sending an IPI to an offline -* CPU but does not guarantee sending an IPI to newly hotplugged CPUs: -* on_each_cpu_mask() blocks hotplug and won't talk to offlined CPUs but -* nothing keeps CPUs from showing up after we populated the cpumask and -* before the call to on_each_cpu_mask(). +* Note that this can be extremely slow as the draining happens in a workqueue. */ void drain_all_pages (struct zone *zone) { +struct work_struct __percpu *works;int cpu;/* @@ -2362,6 +2364,16 @@ void drain_all_pages(struct zone *zone)*/ static cpumask_t cpus_with_pcps; +/* Workqueues cannot recurse */ +if (current->flags &PF_WQ_WORKER ) +return ; + +/* +* As this can be called from reclaim context, do not reenter reclaim. +* An allocation failure can be handled, it's simply slower +*/ + works = alloc_percpu_gfp(struct work_struct, GFP_ATOMIC); +/* * We don't care about racing with CPU hotplug event * as offline notification will cause the notified @@ -2392,8 +2404,24 @@ void drain_all_pages(struct zone *zone)else
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2412
Quoted 10 lines
mm/page_alloc.c +6
-2cpumask_clear_cpu (cpu, &cpus_with_pcps); } -on_each_cpu_mask (&cpus_with_pcps, (smp_call_func_t ) drain_local_pages, - zone,1 ); + +if (works) { +for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (works, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work);
This translates to queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe? lru_add_drain_all() uses get_online_cpus() around this.
schedule_work_on() also uses the generic system_wq, while lru drain has its own workqueue with WQ_MEM_RECLAIM so it seems that would be useful here as well?
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2422
Quoted 10 lines
mm/page_alloc.c +10
-0+ } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (works, cpu)); + }else { +for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct work; + +INIT_WORK (&work, drain_local_pages_wq); +schedule_work_on (cpu, &work); +flush_work (&work);
Totally out of scope, but I wonder if schedule_on_each_cpu() could use the same fallback that's here?
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2427
Quoted 6 lines
mm/page_alloc.c +2
-0+ } + } }#ifdef CONFIG_HIBERNATION
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 4/4] mm, page_alloc: Only use per-cpu allocator for irq-safe requests
In reply to Mel GormanOn 01/17/2017 10:29 AM, Mel Gorman wrote:
[...]
Review static void __free_pages_ok(struct page *page, unsigned int order) · line 1246
Quoted 7 lines
(quoted diff) +1
-2@@ -1244,10 +1243,8 @@ static void __free_pages_ok(struct page *page, unsigned int order) return; migratetype = get_pfnblock_migratetype(page, pfn); - local_irq_save(flags); - __count_vm_events(PGFREE, 1 << order); + count_vm_events(PGFREE, 1 << order);
Maybe this could be avoided by moving the counting into free_one_page()? Diff suggestion at the end of e-mail.
Quoted 30 lines
(quoted diff) +3
-4free_one_page(page_zone(page), page, pfn, order, migratetype); - local_irq_restore(flags); } static void __init __free_pages_boot_core(struct page *page, unsigned int order)@@ -2219,8 +2216,9 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, int migratetype, bool cold) { int i, alloced = 0; + unsigned long flags; - spin_lock(&zone->lock); + spin_lock_irqsave(&zone->lock, flags); for (i = 0; i < count; ++i) { struct page *page = __rmqueue(zone, order, migratetype); if (unlikely(page == NULL))@@ -2256,7 +2254,7 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, * pages added to the pcp list. */ __mod_zone_page_state(zone, NR_FREE_PAGES, -(i << order)); - spin_unlock(&zone->lock); + spin_unlock_irqrestore(&zone->lock, flags); return alloced; }@@ -2472,16 +2470,20 @@ void free_hot_cold_page(struct page *page, bool cold) { struct zone *zone = page_zone(page); struct per_cpu_pages *pcp; - unsigned long flags;
Review void free_hot_cold_page(struct page *page, bool cold) · line 2482
Quoted 10 lines
(quoted diff) +4
-0unsigned long pfn = page_to_pfn(page); int migratetype; if (!free_pcp_prepare(page)) return; + if (in_interrupt()) { + __free_pages_ok(page, 0); + return; + }
I think this should go *before* free_pcp_prepare() otherwise free_pages_prepare() gets done twice in interrupt.
mm/page_alloc.c +2 -2
@@ -1149,6 +1149,7 @@ static void free_one_page(struct zone *zone, {unsigned long nr_scanned, flags;spin_lock_irqsave (&zone->lock, flags); +__count_vm_events (PGFREE ,1 << order); nr_scanned =node_page_state (zone->zone_pgdat,NR_PAGES_SCANNED );if (nr_scanned)__mod_node_page_state (zone->zone_pgdat,NR_PAGES_SCANNED , -nr_scanned);
@@ -1243,7 +1244,6 @@ static void __free_pages_ok(struct page *page, unsigned int order)return ; migratetype =get_pfnblock_migratetype (page, pfn); -count_vm_events (PGFREE ,1 << order);free_one_page (page_zone (page), page, pfn, order, migratetype); }
@@ -2484,7 +2484,6 @@ void free_hot_cold_page(struct page *page, bool cold) migratetype =get_pfnblock_migratetype (page, pfn);set_pcppage_migratetype (page, migratetype);preempt_disable (); -__count_vm_event (PGFREE );/* * We only track unmovable, reclaimable and movable on pcp lists.
@@ -2501,6 +2500,7 @@ void free_hot_cold_page(struct page *page, bool cold) migratetype =MIGRATE_MOVABLE ; } +__count_vm_event (PGFREE ); pcp = &this_cpu_ptr (zone->pageset)->pcp;if (!cold)list_add (&page->lru, &pcp->lists[migratetype]);
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Vlastimil BabkaQuoted 8 lines · Vlastimil Babka
Quoted 8 lines
mm/page_alloc.c +2
-2@@ -2392,8 +2404,24 @@ void drain_all_pages(struct zone *zone)else cpumask_clear_cpu (cpu, &cpus_with_pcps); } -on_each_cpu_mask (&cpus_with_pcps, (smp_call_func_t ) drain_local_pages, - zone,1 ); + +if (works) {
Quoted 9 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2412
Quoted 4 lines
mm/page_alloc.c +4
-0+for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (works, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work);This translates to
queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe?lru_add_drain_all()usesget_online_cpus()around this.
get_online_cpus() would be required.
Quoted 4 lines
schedule_work_on()also uses the genericsystem_wq, while lru drain has its own workqueue withWQ_MEM_RECLAIMso it seems that would be useful here as well?
I would be reluctant to introduce a dedicated queue unless there was a definite case where an OOM occurred because pages were pinned on per-cpu lists and couldn't be drained because the buddy allocator was depleted. As it was, I thought the fallback case was excessively paranoid.
Quoted 5 lines
Quoted 5 lines
mm/page_alloc.c +5
-0+ } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (works, cpu)); + }else { +for_each_cpu (cpu, &cpus_with_pcps) {
Quoted 9 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2422
Quoted 5 lines
mm/page_alloc.c +5
-0+struct work_struct work; + +INIT_WORK (&work, drain_local_pages_wq); +schedule_work_on (cpu, &work); +flush_work (&work);Totally out of scope, but I wonder if
schedule_on_each_cpu()could use the same fallback that's here?
I'm not aware of a case where it really has been a problem. I only considered it here as the likely caller is in a context that is failing allocations.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 4/4] mm, page_alloc: Only use per-cpu allocator for irq-safe requests
In reply to Vlastimil BabkaQuoted 7 lines · Vlastimil Babka
On 01/17/2017 10:29 AM, Mel Gorman wrote:
[...]
Quoted 3 lines
(quoted diff) +0
-0@@ -1244,10 +1243,8 @@ static void __free_pages_ok(struct page *page, unsigned int order) return;
Quoted 8 lines
Review static void __free_pages_ok(struct page *page, unsigned int order) · line 1246
Quoted 4 lines
(quoted diff) +1
-2migratetype = get_pfnblock_migratetype(page, pfn); - local_irq_save(flags); - __count_vm_events(PGFREE, 1 << order); + count_vm_events(PGFREE, 1 << order);Maybe this could be avoided by moving the counting into
free_one_page()? Diff suggestion at the end of e-mail.
Yes, that would work.
Quoted 11 lines
Quoted 11 lines
(quoted diff) +0
-1@@ -2472,16 +2470,20 @@ void free_hot_cold_page(struct page *page, bool cold) { struct zone *zone = page_zone(page); struct per_cpu_pages *pcp; - unsigned long flags; unsigned long pfn = page_to_pfn(page); int migratetype; if (!free_pcp_prepare(page)) return;
Quoted 8 lines
Review void free_hot_cold_page(struct page *page, bool cold) · line 2482
Quoted 4 lines
(quoted diff) +4
-0+ if (in_interrupt()) { + __free_pages_ok(page, 0); + return; + }I think this should go *before*
free_pcp_prepare()otherwisefree_pages_prepare()gets done twice in interrupt.
You're right, thanks.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanQuoted 26 lines · Mel Gorman
Quoted 8 lines · Vlastimil Babka
Quoted 8 lines
mm/page_alloc.c +2
-2@@ -2392,8 +2404,24 @@ void drain_all_pages(struct zone *zone)else cpumask_clear_cpu (cpu, &cpus_with_pcps); } -on_each_cpu_mask (&cpus_with_pcps, (smp_call_func_t ) drain_local_pages, - zone,1 ); + +if (works) {Quoted 9 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2412
Quoted 4 lines
mm/page_alloc.c +4
-0+for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (works, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work);This translates to
queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe?lru_add_drain_all()usesget_online_cpus()around this.
get_online_cpus()would be required.Quoted 4 lines
schedule_work_on()also uses the genericsystem_wq, while lru drain has its own workqueue withWQ_MEM_RECLAIMso it seems that would be useful here as well?
Quoted 4 lines
I would be reluctant to introduce a dedicated queue unless there was a definite case where an OOM occurred because pages were pinned on per-cpu lists and couldn't be drained because the buddy allocator was depleted. As it was, I thought the fallback case was excessively paranoid.
I guess that you know it but it is not clear from the above paragraph.
WQ_MEM_RECLAIM makes sure that there is a rescue worker available. It is used when all workers are busy (blocked by an allocation request) and new worker (kthread) cannot be forked because the fork would need an allocation as well.
The fallback below solves the situation when struct work cannot be allocated. But it does not solve the situation when there is no worker to actually proceed the work. I am not sure if this is relevant for drain_all_pages().
Best Regards,
Petr
Quoted 15 lines
Quoted 5 lines
Quoted 5 lines
mm/page_alloc.c +5
-0+ } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (works, cpu)); + }else { +for_each_cpu (cpu, &cpus_with_pcps) {Quoted 9 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2422
Quoted 5 lines
mm/page_alloc.c +5
-0+struct work_struct work; + +INIT_WORK (&work, drain_local_pages_wq); +schedule_work_on (cpu, &work); +flush_work (&work);Totally out of scope, but I wonder if
schedule_on_each_cpu()could use the same fallback that's here?
Quoted 6 lines
I'm not aware of a case where it really has been a problem. I only considered it here as the likely caller is in a context that is failing allocations.
Signature · 2 lines
Mel Gorman SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Quoted 39 lines · Petr Mladek
Quoted 26 lines · Mel Gorman
Quoted 8 lines · Vlastimil Babka
Quoted 8 lines
mm/page_alloc.c +2
-2@@ -2392,8 +2404,24 @@ void drain_all_pages(struct zone *zone)else cpumask_clear_cpu (cpu, &cpus_with_pcps); } -on_each_cpu_mask (&cpus_with_pcps, (smp_call_func_t ) drain_local_pages, - zone,1 ); + +if (works) {Quoted 9 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2412
Quoted 4 lines
mm/page_alloc.c +4
-0+for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (works, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work);This translates to
queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe?lru_add_drain_all()usesget_online_cpus()around this.
get_online_cpus()would be required.Quoted 4 lines
schedule_work_on()also uses the genericsystem_wq, while lru drain has its own workqueue withWQ_MEM_RECLAIMso it seems that would be useful here as well?Quoted 4 lines
I would be reluctant to introduce a dedicated queue unless there was a definite case where an OOM occurred because pages were pinned on per-cpu lists and couldn't be drained because the buddy allocator was depleted. As it was, I thought the fallback case was excessively paranoid.
I guess that you know it but it is not clear from the above paragraph.
WQ_MEM_RECLAIMmakes sure that there is a rescue worker available. It is used when all workers are busy (blocked by an allocation request) and new worker (kthread) cannot be forked because the fork would need an allocation as well.
Quoted 5 lines
The fallback below solves the situation when struct work cannot be allocated. But it does not solve the situation when there is no worker to actually proceed the work. I am not sure if this is relevant for
drain_all_pages().
I'm aware of the situation but in itself, I still don't think it justifies a dedicated workqueue. The main call for drain_all_pages under reclaim pressure is dubious because it's easy to trigger. For example, two contenders for memory that are doing a streaming read or large amounts of anonymous faults. Reclaim can be making progress but the two are racing with each other to keep the watermarks above min and draining frequently. The IPIs for a fairly normal situation are bad enough and even the workqueue work isn't particularly welcome.
It would make more sense overall to move the unreserve and drain logic into the nearly-oom path but it would likely be overkill. I'd only want to look into that or a dedicated workqueue if there is a case of an OOM triggered when a large number of CPUs had per-cpu pages available.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanHello,
Quoted 6 lines · Mel Gorman
Quoted 4 lines
This translates to
queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe?lru_add_drain_all()usesget_online_cpus()around this.
get_online_cpus()would be required.
This part of workqueue usage has always been a bit clunky and I should imrpove it but you don't necessarily have to pin the cpus from queueing to execution. You can queue without checking whether the CPU is online and instead synchronize the actual work item execution against cpu offline callback so that if the work item gets executed after offline callback is finished, it becomes a noop.
Thanks.
Signature · 7 lines
tejun -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Quoted 8 lines · Tejun Heo
Hello,
Quoted 5 lines · Mel Gorman
Quoted 4 lines
This translates to
queue_work_on(), which has the comment of "We queue the work to a specific CPU, the caller must ensure it can't go away.", so is this safe?lru_add_drain_all()usesget_online_cpus()around this.
Quoted 9 lines
Quoted 1 line
get_online_cpus()would be required.This part of workqueue usage has always been a bit clunky and I should imrpove it but you don't necessarily have to pin the cpus from queueing to execution. You can queue without checking whether the CPU is online and instead synchronize the actual work item execution against cpu offline callback so that if the work item gets executed after offline callback is finished, it becomes a noop.
What is the actual mechanism that does that? It's not something that schedule_on_each_cpu does and one would expect that the core workqueue implementation would get this sort of detail correct. Or is this a proposal on how it should be done?
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Hello, Mel.
Quoted 4 lines · Mel Gorman
What is the actual mechanism that does that? It's not something that
schedule_on_each_cpudoes and one would expect that the core workqueue implementation would get this sort of detail correct. Or is this a proposal on how it should be done?
If you use schedule_on_each_cpu(), it's all fine as the thing pins cpus and waits for all the work items synchronously. If you wanna do it asynchronously, right now, you'll have to manually synchronize work items against the offline callback manually.
On this area, the current workqueue behavior is pretty bad. Historically, we didn't distinguish affinity-for-optimization affinity-for-correctness, so we couldn't really enforce strong behaviors on it. We started distinguishing them some releases ago, so I should revisit it soon.
Thanks.
--
tejun
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Quoted 8 lines · Tejun Heo
Hello, Mel.
Quoted 4 lines · Mel Gorman
What is the actual mechanism that does that? It's not something that
schedule_on_each_cpudoes and one would expect that the core workqueue implementation would get this sort of detail correct. Or is this a proposal on how it should be done?
Quoted 5 lines
If you use
schedule_on_each_cpu(), it's all fine as the thing pins cpus and waits for all the work items synchronously. If you wanna do it asynchronously, right now, you'll have to manually synchronize work items against the offline callback manually.
Is the current implementation and what it does wrong in some way? I ask because synchronising against the offline callback sounds like it would be a bit of a maintenance mess for relatively little gain.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanQuoted 53 lines · Mel Gorman
The per-cpu page allocator can be drained immediately via
drain_all_pages()which sends IPIs to every CPU. In the next patch, the per-cpu allocator will only be used for interrupt-safe allocations which prevents draining it from IPI context. This patch uses workqueues to drain the per-cpu lists instead.This is slower but no slowdown during intensive reclaim was measured and the paths that use
drain_all_pages()are not that sensitive to performance. This is particularly true as the path would only be triggered when reclaim is failing. It also makes a some sense to avoid storming a machine with IPIs when it's under memory pressure. Arguably, it should be further adjusted so that only one caller at a time is draining pages but it's beyond the scope of the current patch.Signed-off-by Mel Gorman <[email protected]>--- mm/page_alloc.c | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-)mm/page_alloc.c +7
-5@@ -2341,19 +2341,21 @@ void drain_local_pages(struct zone *zone)drain_pages (cpu); } +static void drain_local_pages_wq (struct work_struct *work) +{ +drain_local_pages (NULL ); +} +/* * Spill all the per-cpu pages from all CPUs back into the buddy allocator. * * When zone parameter is non-NULL, spill just the single zone's pages. * -* Note that this code is protected against sending an IPI to an offline -* CPU but does not guarantee sending an IPI to newly hotplugged CPUs: -* on_each_cpu_mask() blocks hotplug and won't talk to offlined CPUs but -* nothing keeps CPUs from showing up after we populated the cpumask and -* before the call to on_each_cpu_mask(). +* Note that this can be extremely slow as the draining happens in a workqueue. */ void drain_all_pages (struct zone *zone) { +struct work_struct __percpu *works;int cpu;/* @@ -2362,6 +2364,16 @@ void drain_all_pages(struct zone *zone)*/ static cpumask_t cpus_with_pcps;
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2375
Quoted 10 lines
mm/page_alloc.c +9
-0+/* Workqueues cannot recurse */ +if (current->flags &PF_WQ_WORKER ) +return ; + +/* +* As this can be called from reclaim context, do not reenter reclaim. +* An allocation failure can be handled, it's simply slower +*/ + works = alloc_percpu_gfp(struct work_struct, GFP_ATOMIC);
BTW I wonder, even with GFP_ATOMIC, is this a good idea to do for a temporary allocation like this one? pcpu_alloc() seems rather involved to me and I've glanced at the other usages and they seem much more long-lived. Maybe it would be really better to have single static "works" and serialize the callers as you suggest in the changelog?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
In reply to Mel GormanHello, Mel.
Quoted 15 lines · Mel Gorman
Quoted 8 lines · Tejun Heo
Hello, Mel.
Quoted 4 lines · Mel Gorman
What is the actual mechanism that does that? It's not something that
schedule_on_each_cpudoes and one would expect that the core workqueue implementation would get this sort of detail correct. Or is this a proposal on how it should be done?Quoted 5 lines
If you use
schedule_on_each_cpu(), it's all fine as the thing pins cpus and waits for all the work items synchronously. If you wanna do it asynchronously, right now, you'll have to manually synchronize work items against the offline callback manually.
Quoted 3 lines
Is the current implementation and what it does wrong in some way? I ask because synchronising against the offline callback sounds like it would be a bit of a maintenance mess for relatively little gain.
As long as you wrap them with get/put_online_cpus(), the current implementation should be fine. If it were up to me, I'd rather use static percpu work_structs and synchronize with a mutex tho. The cost of synchronizing via mutex isn't high here compared to the overall operation, the whole thing is synchronous anyway and you won't have to worry about falling back.
Thanks.
Signature · 7 lines
tejun -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Quoted 22 lines · Tejun Heo
Hello, Mel.
Quoted 15 lines · Mel Gorman
Quoted 8 lines · Tejun Heo
Hello, Mel.
Quoted 4 lines · Mel Gorman
What is the actual mechanism that does that? It's not something that
schedule_on_each_cpudoes and one would expect that the core workqueue implementation would get this sort of detail correct. Or is this a proposal on how it should be done?Quoted 5 lines
If you use
schedule_on_each_cpu(), it's all fine as the thing pins cpus and waits for all the work items synchronously. If you wanna do it asynchronously, right now, you'll have to manually synchronize work items against the offline callback manually.Quoted 3 lines
Is the current implementation and what it does wrong in some way? I ask because synchronising against the offline callback sounds like it would be a bit of a maintenance mess for relatively little gain.
Quoted 7 lines
As long as you wrap them with get/put_online_cpus(), the current implementation should be fine. If it were up to me, I'd rather use static percpu
work_structsand synchronize with a mutex tho. The cost of synchronizing via mutex isn't high here compared to the overall operation, the whole thing is synchronous anyway and you won't have to worry about falling back.
The synchronisation is not even required in all cases. Multiple direct reclaimers synching to do the drain doesn't necessarily make sense for example. How does the following look to you?
---8<---
mm, page_alloc: Use static global work_struct for draining per-cpu pages
As suggested by Vlastimil Babka and Tejun Heo, this patch uses a static work_struct to co-ordinate the draining of per-cpu pages on the workqueue. Only one task can drain at a time but this is better than the previous scheme that allowed multiple tasks to send IPIs at a time.
One consideration is whether parallel requests should synchronise against each other. This patch does not synchronise for a global drain. The common case for such callers is expected to be multiple parallel direct reclaimers competing for pages when the watermark is close to min. Draining the per-cpu list is unlikely to make much progress and serialising the drain is of dubious merit in that case. Drains are synchonrised for callers such as memory hotplug and CMA that care about the drain being complete when the function returns.
--- mm/page_alloc.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-)
mm/page_alloc.c +23 -18
@@ -92,6 +92,10 @@ EXPORT_PER_CPU_SYMBOL(_numa_mem_);int _node_numa_mem_[MAX_NUMNODES ];#endif +/* work_structs for global per-cpu drains */ +DEFINE_MUTEX (pcpu_drain_mutex); +DEFINE_PER_CPU(struct work_struct, pcpu_drain); +#ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY volatile unsigned long latent_entropy __latent_entropy;EXPORT_SYMBOL (latent_entropy);
@@ -2351,7 +2355,6 @@ static void drain_local_pages_wq(struct work_struct *work)*/ void drain_all_pages (struct zone *zone) { -struct work_struct __percpu *works;int cpu;/*
@@ -2365,11 +2368,21 @@ void drain_all_pages(struct zone *zone)return ;/* +* Do not drain if one is already in progress unless it's specific to +* a zone. Such callers are primarily CMA and memory hotplug and need +* the drain to be complete when the call returns. +*/ +if (unlikely (!mutex_trylock (&pcpu_drain_mutex))) { +if (!zone) +return ; +mutex_lock (&pcpu_drain_mutex); + } + +/* * As this can be called from reclaim context, do not reenter reclaim. * An allocation failure can be handled, it's simply slower */ get_online_cpus (); - works = alloc_percpu_gfp(struct work_struct, GFP_ATOMIC);/* * We don't care about racing with CPU hotplug event
@@ -2402,24 +2415,16 @@ void drain_all_pages(struct zone *zone)cpumask_clear_cpu (cpu, &cpus_with_pcps); } -if (works) { -for_each_cpu (cpu, &cpus_with_pcps) { -struct work_struct *work =per_cpu_ptr (works, cpu); -INIT_WORK (work, drain_local_pages_wq); -schedule_work_on (cpu, work); - } -for_each_cpu (cpu, &cpus_with_pcps) -flush_work (per_cpu_ptr (works, cpu)); - }else { -for_each_cpu (cpu, &cpus_with_pcps) { -struct work_struct work; - -INIT_WORK (&work, drain_local_pages_wq); -schedule_work_on (cpu, &work); -flush_work (&work); - } +for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (&pcpu_drain, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work); } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (&pcpu_drain, cpu)); +put_online_cpus (); +mutex_unlock (&pcpu_drain_mutex); }#ifdef CONFIG_HIBERNATION
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Hello,
Quoted 4 lines · Mel Gorman
mm/page_alloc.c +0
-0@@ -2402,24 +2415,16 @@ void drain_all_pages(struct zone *zone)cpumask_clear_cpu (cpu, &cpus_with_pcps); }
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2427
Quoted 10 lines
mm/page_alloc.c +8
-0+for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (&pcpu_drain, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work); } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (&pcpu_drain, cpu)); +put_online_cpus (); +mutex_unlock (&pcpu_drain_mutex);
Looks good to me.
Thanks.
Signature · 7 lines
tejun -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH 3/4] mm, page_alloc: Drain per-cpu pages from workqueue context
Quoted 7 lines · Tejun Heo
Hello,
Quoted 4 lines · Mel Gorman
mm/page_alloc.c +0
-0@@ -2402,24 +2415,16 @@ void drain_all_pages(struct zone *zone)cpumask_clear_cpu (cpu, &cpus_with_pcps); }
Quoted 13 lines
mm/page_alloc.c void drain_all_pages(struct zone *zone) · line 2427
Quoted 10 lines
mm/page_alloc.c +8
-0+for_each_cpu (cpu, &cpus_with_pcps) { +struct work_struct *work =per_cpu_ptr (&pcpu_drain, cpu); +INIT_WORK (work, drain_local_pages_wq); +schedule_work_on (cpu, work); } +for_each_cpu (cpu, &cpus_with_pcps) +flush_work (per_cpu_ptr (&pcpu_drain, cpu)); +put_online_cpus (); +mutex_unlock (&pcpu_drain_mutex);Looks good to me.
Thanks Tejun.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>