Skip to contentSkip to conversation

staging: rtl8192u: Fix brace placement

PATCH In review simran singhal 2 participants 2 messages Feb 11, 2017 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: rtl8192u: Fix brace placement

Fix brace placement errors caught by checkpatch.pl ERROR: that open brace { should be on the previous line

---
 .../staging/rtl8192u/ieee80211/rtl819x_BAProc.c    | 90 ++++++++--------------
 1 file changed, 30 insertions(+), 60 deletions(-)
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c +30 -60
index 91ea77d..c09f3ad 100644
@@ -46,15 +46,13 @@ static u8 TxTsDeleteBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTxTs)
 	u8			bSendDELBA = false;
 
 	// Delete pending BA
-	if (pPendingBa->bValid)
-	{
+	if (pPendingBa->bValid) {
 		DeActivateBAEntry(ieee, pPendingBa);
 		bSendDELBA = true;
 	}
 
 	// Delete admitted BA
-	if (pAdmittedBa->bValid)
-	{
+	if (pAdmittedBa->bValid) {
 		DeActivateBAEntry(ieee, pAdmittedBa);
 		bSendDELBA = true;
 	}
@@ -74,8 +72,7 @@ static u8 RxTsDeleteBA(struct ieee80211_device *ieee, PRX_TS_RECORD pRxTs)
 	PBA_RECORD		pBa = &pRxTs->RxAdmittedBARecord;
 	u8			bSendDELBA = false;
 
-	if (pBa->bValid)
-	{
+	if (pBa->bValid) {
 		DeActivateBAEntry(ieee, pBa);
 		bSendDELBA = true;
 	}
@@ -115,14 +112,12 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, P
 	u16 len = ieee->tx_headroom + 9;
 	//category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) +  BA Timeout Value(2) +  BA Start SeqCtrl(2)(or StatusCode(2))
 	IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:%pM, ieee->dev:%p\n", __func__, type, Dst, ieee->dev);
-	if (pBA == NULL)
-	{
+	if (pBA == NULL) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "pBA is NULL\n");
 		return NULL;
 	}
 	skb = dev_alloc_skb(len + sizeof( struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
-	if (skb == NULL)
-	{
+	if (skb == NULL) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
 		return NULL;
 	}
@@ -146,8 +141,7 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, P
 	// Dialog Token
 	*tag ++= pBA->DialogToken;
 
-	if (ACT_ADDBARSP == type)
-	{
+	if (ACT_ADDBARSP == type) {
 		// Status Code
 		printk("=====>to send ADDBARSP\n");
 
@@ -163,8 +157,7 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, P
 	put_unaligned_le16(pBA->BaTimeoutValue, tag);
 	tag += 2;
 
-	if (ACT_ADDBAREQ == type)
-	{
+	if (ACT_ADDBAREQ == type) {
 	// BA Start SeqCtrl
 		memcpy(tag, (u8 *)&(pBA->BaStartSeqCtrl), 2);
 		tag += 2;
@@ -209,8 +202,7 @@ static struct sk_buff *ieee80211_DELBA(
 	DelbaParamSet.field.TID	= pBA->BaParamSet.field.TID;
 
 	skb = dev_alloc_skb(len + sizeof( struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
-	if (skb == NULL)
-	{
+	if (skb == NULL) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
 		return NULL;
 	}
@@ -257,15 +249,13 @@ static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
 	struct sk_buff *skb;
 	skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
 
-	if (skb)
-	{
+	if (skb) {
 		softmac_mgmt_xmit(skb, ieee);
 		//add statistic needed here.
 		//and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
 		//WB
 	}
-	else
-	{
+	else {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
 	}
 	return;
@@ -284,13 +274,11 @@ static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
 {
 	struct sk_buff *skb;
 	skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
-	if (skb)
-	{
+	if (skb) {
 		softmac_mgmt_xmit(skb, ieee);
 		//same above
 	}
-	else
-	{
+	else {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
 	}
 
@@ -313,13 +301,11 @@ static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
 {
 	struct sk_buff *skb;
 	skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); //construct ACT_ADDBARSP frames
-	if (skb)
-	{
+	if (skb) {
 		softmac_mgmt_xmit(skb, ieee);
 		//same above
 	}
-	else
-	{
+	else {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
 	}
 	return ;
@@ -379,8 +365,7 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
 			dst,
 			(u8)(pBaParamSet->field.TID),
 			RX_DIR,
-			true)	)
-	{
+			true)	) {
 		rc = ADDBA_STATUS_REFUSED;
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __func__);
 		goto OnADDBAReq_Fail;
@@ -390,8 +375,7 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
 	// We can do much more check here, including BufferSize, AMSDU_Support, Policy, StartSeqCtrl...
 	// I want to check StartSeqCtrl to make sure when we start aggregation!!!
 	//
-	if (pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
-	{
+	if (pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED) {
 		rc = ADDBA_STATUS_INVALID_PARAM;
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "BA Policy is not correct in %s()\n", __func__);
 		goto OnADDBAReq_Fail;
@@ -480,8 +464,7 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
 			dst,
 			(u8)(pBaParamSet->field.TID),
 			TX_DIR,
-			false)	)
-	{
+			false)	) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __func__);
 		ReasonCode = DELBA_REASON_UNKNOWN_BA;
 		goto OnADDBARsp_Reject;
@@ -496,34 +479,29 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
 	// Check if related BA is waiting for setup.
 	// If not, reject by sending DELBA frame.
 	//
-	if (pAdmittedBA->bValid)
-	{
+	if (pAdmittedBA->bValid) {
 		// Since BA is already setup, we ignore all other ADDBA Response.
 		IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
 		return -1;
 	}
-	else if((!pPendingBA->bValid) ||(*pDialogToken != pPendingBA->DialogToken))
-	{
+	else if((!pPendingBA->bValid) ||(*pDialogToken != pPendingBA->DialogToken)) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR,  "OnADDBARsp(): Recv ADDBA Rsp. BA invalid, DELBA! \n");
 		ReasonCode = DELBA_REASON_UNKNOWN_BA;
 		goto OnADDBARsp_Reject;
 	}
-	else
-	{
+	else {
 		IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. BA is admitted! Status code:%X\n", *pStatusCode);
 		DeActivateBAEntry(ieee, pPendingBA);
 	}
 
 
-	if(*pStatusCode == ADDBA_STATUS_SUCCESS)
-	{
+	if(*pStatusCode == ADDBA_STATUS_SUCCESS) {
 		//
 		// Determine ADDBA Rsp content here.
 		// We can compare the value of BA parameter set that Peer returned and Self sent.
 		// If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
 		//
-		if (pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
-		{
+		if (pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED) {
 			// Since this is a kind of ADDBA failed, we delay next ADDBA process.
 			pTS->bAddBaReqDelayed = true;
 			DeActivateBAEntry(ieee, pAdmittedBA);
@@ -542,8 +520,7 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
 		DeActivateBAEntry(ieee, pAdmittedBA);
 		ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
 	}
-	else
-	{
+	else {
 		// Delay next ADDBA process.
 		pTS->bAddBaReqDelayed = true;
 	}
@@ -582,8 +559,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
 	}
 
 	if (ieee->current_network.qos_data.active == 0 ||
-	    !ieee->pHTInfo->bCurrentHTSupport)
-	{
+	    !ieee->pHTInfo->bCurrentHTSupport) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "received DELBA while QOS or HT is not supported(%d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
 		return -1;
 	}
@@ -593,8 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
 	dst = &delba->addr2[0];
 	pDelBaParamSet = (PDELBA_PARAM_SET)&delba->payload[2];
 
-	if(pDelBaParamSet->field.Initiator == 1)
-	{
+	if(pDelBaParamSet->field.Initiator == 1) {
 		PRX_TS_RECORD	pRxTs;
 
 		if (!GetTs(
@@ -603,16 +578,14 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
 				dst,
 				(u8)pDelBaParamSet->field.TID,
 				RX_DIR,
-				false)	)
-		{
+				false)	) {
 			IEEE80211_DEBUG(IEEE80211_DL_ERR,  "can't get TS for RXTS in %s()\n", __func__);
 			return -1;
 		}
 
 		RxTsDeleteBA(ieee, pRxTs);
 	}
-	else
-	{
+	else {
 		PTX_TS_RECORD	pTxTs;
 
 		if (!GetTs(
@@ -621,8 +594,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
 			dst,
 			(u8)pDelBaParamSet->field.TID,
 			TX_DIR,
-			false)	)
-		{
+			false)	) {
 			IEEE80211_DEBUG(IEEE80211_DL_ERR,  "can't get TS for TXTS in %s()\n", __func__);
 			return -1;
 		}
@@ -674,8 +646,7 @@ void
 TsInitDelBA( struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect)
 {
 
-	if(TxRxSelect == TX_DIR)
-	{
+	if(TxRxSelect == TX_DIR) {
 		PTX_TS_RECORD	pTxTs = (PTX_TS_RECORD)pTsCommonInfo;
 
 		if(TxTsDeleteBA(ieee, pTxTs))
@@ -686,8 +657,7 @@ TsInitDelBA( struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SE
 				TxRxSelect,
 				DELBA_REASON_END_BA);
 	}
-	else if(TxRxSelect == RX_DIR)
-	{
+	else if(TxRxSelect == RX_DIR) {
 		PRX_TS_RECORD	pRxTs = (PRX_TS_RECORD)pTsCommonInfo;
 		if(RxTsDeleteBA(ieee, pRxTs))
 			ieee80211_send_DELBA(
Signature · 1 line
2.7.4
maintainer
#1 lore raw
Quoted 7 lines · simran singhal

Fix brace placement errors caught by checkpatch.pl ERROR: that open brace { should be on the previous line

---
 .../staging/rtl8192u/ieee80211/rtl819x_BAProc.c    | 90 ++++++++--------------
 1 file changed, 30 insertions(+), 60 deletions(-)

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.

You are receiving this message because of the following common error(s) as indicated below:

- You sent multiple patches, yet no indication of which ones should be applied in which order. Greg could just guess, but if you are receiving this email, he guessed wrong and the patches didn't apply. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for a description of how to do this so that Greg has a chance to apply these correctly.

If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.

thanks,

greg k-h's patch email bot