Skip to contentSkip to conversation

U-Boot v2017.03-rc2 released

U-Boot Tom Rini 5 participants 12 messages Feb 13, 2017 – Feb 14, 2017

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Thanks all!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170213/65bac4d0/attachment.sig>
#1 lore raw

Hello Tom,

Am 14.02.2017 um 00:01 schrieb Tom Rini:

Quoted 7 lines

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Hmm.. my weekly test of current mainline u-boot shows a problem with the at91 based smartweb and corvus boards:

smartweb log:
U-Boot 2017.03-rc2-00002-g6484233 (Feb 14 2017 - 03:01:05 +0100)

CPU: AT91SAM9260
Crystal frequency:   18.432 MHz
CPU clock        :  198.656 MHz
Master clock     :   99.328 MHz

Watchdog enabled
DRAM: 64 MiB

NAND: 256 MiB

In: serial at fffff200

Out: serial at fffff200

Err: serial at fffff200

Net: No ethernet found.

U-Boot#

corvus:
U-Boot SPL 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27) Trying to boot from NAND

U-Boot 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27 +0100)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
DRAM:  128 MiB
NAND:  256 MiB
In:    serial at ffffee00
Out:   serial at ffffee00
Err:   serial at ffffee00
Net:   No ethernet found.

Hit any key to stop autoboot
U-Boot>

No ethernet found with current mainline,

Last week it ethernet worked:
xeidos.ddns.net/tests/test_db_auslesen.php#237
xeidos.ddns.net/tests/test_db_auslesen.php#236

I try to find time to look into it ... added Andreas to it, may he know something ...

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Acked-by Joe Hershberger
#2 lore raw

Hello Tom,

Am 14.02.2017 um 06:38 schrieb Heiko Schocher:

Quoted 50 lines

Hello Tom,

Am 14.02.2017 um 00:01 schrieb Tom Rini:

Quoted 7 lines

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Hmm.. my weekly test of current mainline u-boot shows a problem with the at91 based smartweb and corvus boards:

smartweb log:
U-Boot 2017.03-rc2-00002-g6484233 (Feb 14 2017 - 03:01:05 +0100)

CPU: AT91SAM9260
Crystal frequency:   18.432 MHz
CPU clock        :  198.656 MHz
Master clock     :   99.328 MHz
        Watchdog enabled
DRAM:  64 MiB
NAND:  256 MiB
In:    serial at fffff200
Out:   serial at fffff200
Err:   serial at fffff200
Net:   No ethernet found.

U-Boot#

corvus:
U-Boot SPL 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27) Trying to boot from NAND

U-Boot 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27 +0100)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
DRAM:  128 MiB
NAND:  256 MiB
In:    serial at ffffee00
Out:   serial at ffffee00
Err:   serial at ffffee00
Net:   No ethernet found.

Hit any key to stop autoboot
U-Boot>

Quoted 8 lines

No ethernet found with current mainline,

Last week it ethernet worked:
xeidos.ddns.net/tests/test_db_auslesen.php#237
xeidos.ddns.net/tests/test_db_auslesen.php#236

I try to find time to look into it ... added Andreas to it, may he know something ...

Could bisect it (not yet automated with tbot, as without ethernet, I had to load the new u-boot bin with "loadb" ...)

pollux:u-boot-smartweb hs [(kein Branch, bin?re Suche begonnen bei master)] $ git bisect visualize commit 577aa3b3587193ee078ce83d918604da6ac84dd5

Author: Wenyou Yang <[email protected]>
Date:   Wed Nov 2 10:06:56 2016 +0800

net: macb: Add the clock support

Due to introducing the at91 clock driver, add the clock support.

pollux:u-boot-smartweb hs [(kein Branch, bin?re Suche begonnen bei master)] $ git bisect log git bisect start
# bad: [6484233c463a1b79bae651a7fa8504a838425eb7] dfu: introduce dfu_mtd support
git bisect bad 6484233c463a1b79bae651a7fa8504a838425eb7
# good: [446d4e048ee3b00f7907e15cd02aa404cc714c77] x86: make LOAD_FROM_32_BIT visible for platforms git bisect good 446d4e048ee3b00f7907e15cd02aa404cc714c77
# good: [6f57b19857b514f6e94e423c9bbe2d4b8973a0db] Merge branch 'master' of git://git.denx.de/u-boot-mmc
git bisect good 6f57b19857b514f6e94e423c9bbe2d4b8973a0db
# bad: [2a48b3a2c4ec0f1775deeac5cfe7e61072b6b894] omap_hsmmc.c: Fix build warning on non-omap3 git bisect bad 2a48b3a2c4ec0f1775deeac5cfe7e61072b6b894
# bad: [83cfbeb0df9f5962a16e8737e08cf59ed84e0cff] net: phy: Fix mask so that we can identify Marvell 88E1518
git bisect bad 83cfbeb0df9f5962a16e8737e08cf59ed84e0cff
# bad: [9f455bcb34fcab31b0eb8eec5702105c8d4bde18] net: cosmetic: Make the MAC address string less magical
git bisect bad 9f455bcb34fcab31b0eb8eec5702105c8d4bde18
# bad: [577aa3b3587193ee078ce83d918604da6ac84dd5] net: macb: Add the clock support
git bisect bad 577aa3b3587193ee078ce83d918604da6ac84dd5
# good: [ebcb40a5a02adc153db949d59e9df9bf0d89b6ec] net: Kconfig: Add CONFIG_MACB option git bisect good ebcb40a5a02adc153db949d59e9df9bf0d89b6ec

# first bad commit: [577aa3b3587193ee078ce83d918604da6ac84dd5] net: macb: Add the clock support
pollux:u-boot-smartweb hs [(kein Branch, bin?re Suche begonnen bei master)] $

A fast revert of this patch, and u-boot works with ethernet again on the smartweb board ... any ideas?

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#3 lore raw

Hi Heiko,

Quoted 110 lines

-----Original Message-----
From: Heiko Schocher [mailto:hs at denx.de]
Sent: 2017?2?14? 14:26
To: Tom Rini <[email protected]>; Tony Yang - A41535 <[email protected]>
Cc: u-boot at lists.denx.de; Andreas Bie?mann <[email protected]>; Joe Hershberger <[email protected]>
Subject: Re: [U-Boot] [ANN] U-Boot v2017.03-rc2 released

Hello Tom,

Am 14.02.2017 um 06:38 schrieb Heiko Schocher:

Quoted 50 lines

Hello Tom,

Am 14.02.2017 um 00:01 schrieb Tom Rini:

Quoted 7 lines

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Hmm.. my weekly test of current mainline u-boot shows a problem with the at91 based smartweb and corvus boards:

smartweb log:
U-Boot 2017.03-rc2-00002-g6484233 (Feb 14 2017 - 03:01:05 +0100)

CPU: AT91SAM9260
Crystal frequency:   18.432 MHz
CPU clock        :  198.656 MHz
Master clock     :   99.328 MHz
        Watchdog enabled
DRAM:  64 MiB
NAND:  256 MiB
In:    serial at fffff200
Out:   serial at fffff200
Err:   serial at fffff200
Net:   No ethernet found.

U-Boot#

corvus:
U-Boot SPL 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27) Trying to boot from NAND

U-Boot 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27 +0100)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
DRAM:  128 MiB
NAND:  256 MiB
In:    serial at ffffee00
Out:   serial at ffffee00
Err:   serial at ffffee00
Net:   No ethernet found.

Hit any key to stop autoboot
U-Boot>

Quoted 8 lines

No ethernet found with current mainline,

Last week it ethernet worked:
xeidos.ddns.net/tests/test_db_auslesen.php#237
xeidos.ddns.net/tests/test_db_auslesen.php#236

I try to find time to look into it ... added Andreas to it, may he know something ...

Could bisect it (not yet automated with tbot, as without ethernet, I had to load the new u-boot bin with "loadb" ...)

pollux:u-boot-smartweb hs [(kein Branch, bin?re Suche begonnen bei master)]

$ git bisect visualize commit 577aa3b3587193ee078ce83d918604da6ac84dd5
Author: Wenyou Yang <[email protected]>
Date:   Wed Nov 2 10:06:56 2016 +0800

net: macb: Add the clock support

Due to introducing the at91 clock driver, add the clock support.

smartweb hs [(kein Branch, bin?re Suche begonnen bei master)] $ git bisect log git bisect start # bad: [6484233c463a1b79bae651a7fa8504a838425eb7] dfu:
introduce dfu_mtd support git bisect bad 6484233c463a1b79bae651a7fa8504a838425eb7
# good: [446d4e048ee3b00f7907e15cd02aa404cc714c77] x86: make LOAD_FROM_32_BIT visible for platforms git bisect good 446d4e048ee3b00f7907e15cd02aa404cc714c77
# good: [6f57b19857b514f6e94e423c9bbe2d4b8973a0db] Merge branch 'master' of
git://git.denx.de/u-boot-mmc git bisect good 6f57b19857b514f6e94e423c9bbe2d4b8973a0db
# bad: [2a48b3a2c4ec0f1775deeac5cfe7e61072b6b894] omap_hsmmc.c: Fix build warning on non-omap3 git bisect bad 2a48b3a2c4ec0f1775deeac5cfe7e61072b6b894
# bad: [83cfbeb0df9f5962a16e8737e08cf59ed84e0cff] net: phy: Fix mask so that we can identify Marvell
88E1518
git bisect bad 83cfbeb0df9f5962a16e8737e08cf59ed84e0cff
# bad: [9f455bcb34fcab31b0eb8eec5702105c8d4bde18] net: cosmetic: Make the MAC address string less magical git bisect bad 9f455bcb34fcab31b0eb8eec5702105c8d4bde18
# bad: [577aa3b3587193ee078ce83d918604da6ac84dd5] net: macb: Add the clock support git bisect bad 577aa3b3587193ee078ce83d918604da6ac84dd5
# good: [ebcb40a5a02adc153db949d59e9df9bf0d89b6ec] net: Kconfig: Add CONFIG_MACB option git bisect good ebcb40a5a02adc153db949d59e9df9bf0d89b6ec

Quoted 6 lines
# first bad commit: [577aa3b3587193ee078ce83d918604da6ac84dd5] net: macb:
Add the clock support pollux:u-boot-smartweb hs [(kein Branch, bin?re Suche
begonnen bei master)] $

A fast revert of this patch, and u-boot works with ethernet again on the smartweb board ... any ideas?

The clock code should be enclosed by the conditional macro, such as #ifdef CONFIG_CLK ... #endif.

I missed it. Sorry.

Will send a patch to fix.

Quoted 6 lines

bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Best Regards,
Wenyou Yangls

author
#4 lore raw
In reply to Heiko Schocher
Quoted 59 lines · Heiko Schocher

Hello Tom,

Am 14.02.2017 um 06:38 schrieb Heiko Schocher:

Quoted 56 lines

Hello Tom,

Am 14.02.2017 um 00:01 schrieb Tom Rini:

Quoted 7 lines

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Hmm.. my weekly test of current mainline u-boot shows a problem with the at91 based smartweb and corvus boards:

smartweb log:
U-Boot 2017.03-rc2-00002-g6484233 (Feb 14 2017 - 03:01:05 +0100)

CPU: AT91SAM9260
Crystal frequency:   18.432 MHz
CPU clock        :  198.656 MHz
Master clock     :   99.328 MHz
       Watchdog enabled
DRAM:  64 MiB
NAND:  256 MiB
In:    serial at fffff200
Out:   serial at fffff200
Err:   serial at fffff200
Net:   No ethernet found.

U-Boot#

corvus:
U-Boot SPL 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27) Trying to boot from NAND

U-Boot 2017.03-rc2-00002-g0d9386a (Feb 14 2017 - 03:41:27 +0100)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
DRAM:  128 MiB
NAND:  256 MiB
In:    serial at ffffee00
Out:   serial at ffffee00
Err:   serial at ffffee00
Net:   No ethernet found.

Hit any key to stop autoboot
U-Boot>

No ethernet found with current mainline,

Last week it ethernet worked:
xeidos.ddns.net/tests/test_db_auslesen.php#237
xeidos.ddns.net/tests/test_db_auslesen.php#236

Quoted 5 lines
Quoted 2 lines

I try to find time to look into it ... added Andreas to it, may he know something ...

Could bisect it (not yet automated with tbot, as without ethernet, I had to load the new u-boot bin with "loadb" ...)

Good catch, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170214/1e5f79f7/attachment.sig>
#5 lore raw
In reply to Tom Rini
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#6 lore raw

Hi Andy,

Quoted 10 lines · Andy Shevchenko
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Quoted 8 lines

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

We have the beginnings of 64-bit support in there now, so I suspect something there is breaking Edison. Can you bisect it?

Quoted 5 lines

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Hmmm it would be good to get this support into mainline so we can avoid these sorts of problems. I did get the files at some point but have not made time to do it. Do you know if anyone is planning to do this? From memory the patches looked pretty clean.

Quoted 4 lines

--
With Best Regards,
Andy Shevchenko

Regards,
Simon

#7 lore raw

+Bin

Quoted 43 lines · Simon Glass

Hi Andy,

Quoted 10 lines · Andy Shevchenko
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

Quoted 8 lines

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

We have the beginnings of 64-bit support in there now, so I suspect something there is breaking Edison. Can you bisect it?

Quoted 5 lines

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Hmmm it would be good to get this support into mainline so we can avoid these sorts of problems. I did get the files at some point but have not made time to do it. Do you know if anyone is planning to do this? From memory the patches looked pretty clean.

Quoted 4 lines

--
With Best Regards,
Andy Shevchenko

Regards,
Simon

#8 lore raw
In reply to Simon Glass
Quoted 18 lines · Simon Glass

Hi Andy,

Quoted 15 lines · Andy Shevchenko
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

Quoted 6 lines
Quoted 3 lines

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

We have the beginnings of 64-bit support in there now, so I suspect something there is breaking Edison. Can you bisect it?

I don't think so, because each iteration would require to port patches on it. It might take days/weeks since it's not a main work for me.

Quoted 9 lines
Quoted 4 lines

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Hmmm it would be good to get this support into mainline so we can avoid these sorts of problems. I did get the files at some point but have not made time to do it. Do you know if anyone is planning to do this?

Seems we are doing this.

Quoted 1 line

From memory the patches looked pretty clean.

Can you point to the patches repository or any mail archive which we can look at?
Currently our work based on latest stuff from github:01org/edison-u-boot repository.
There patches for our opinion are quite far from upstream quality.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#9 lore raw
Quoted 41 lines · Andy Shevchenko
Quoted 18 lines · Simon Glass

Hi Andy,

Quoted 15 lines · Andy Shevchenko
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

Quoted 6 lines
Quoted 3 lines

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

We have the beginnings of 64-bit support in there now, so I suspect something there is breaking Edison. Can you bisect it?

I don't think so, because each iteration would require to port patches on it. It might take days/weeks since it's not a main work for me.

Quoted 9 lines
Quoted 4 lines

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Hmmm it would be good to get this support into mainline so we can avoid these sorts of problems. I did get the files at some point but have not made time to do it. Do you know if anyone is planning to do this?

Seems we are doing this.

Quoted 7 lines
Quoted 1 line

From memory the patches looked pretty clean.

Can you point to the patches repository or any mail archive which we can look at?
Currently our work based on latest stuff from github:01org/edison-u-boot repository.
There patches for our opinion are quite far from upstream quality.

In addition.
Just confirmed that rc1 works fine.

I have pushed to my repo [1] devel branches, so

edison -- rc1-based
edison-devel-rc2 -- rc2-based not working edison-devel -- quite modified version of edison-devel-rc2

[1] https://github.com/andy-shev/u-boot/tree/edison

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#10 lore raw
Quoted 14 lines · Andy Shevchenko
Quoted 8 lines · Andy Shevchenko
Quoted 7 lines · Simon Glass
Quoted 6 lines · Andy Shevchenko

On Tue, Feb 14, 2017 at 1:01 AM, Tom Rini <[email protected]> wrote:

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

In addition.
Just confirmed that rc1 works fine.

Quoted 7 lines

I have pushed to my repo [1] devel branches, so

edison -- rc1-based
edison-devel-rc2 -- rc2-based not working edison-devel -- quite modified version of edison-devel-rc2

[1] https://github.com/andy-shev/u-boot/tree/edison

Oops, sorry guys for the noise, it seems I found a culprit and it has nothing to do with -rc2.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#11 lore raw
In reply to Andy Shevchenko

Hi Andy,

Quoted 39 lines · Andy Shevchenko
Quoted 18 lines · Simon Glass

Hi Andy,

Quoted 15 lines · Andy Shevchenko
Quoted 7 lines · Tom Rini

Hey all,

It's release day and v2017.03-rc2 is out. I think my patchwork queue is looking good currently but I'm open to being told there's important stuff outstanding. I'm probably going to grab some Kconfig things and perhaps other cleanups I can mechanically confirm are correct. Things are on track for -rc3 on the 27th.

+Cc: Simon

This build weirdly breaks on Intel Edison.
-rc1 works fine, while just rebase on -rc2 becomes unsable

Quoted 6 lines
Quoted 3 lines

On the first boot *original Edison* Linux kernel (v3.10.98 based) doesn't print anything (looks like internal crash in U-Boot), on the sequential we have corrupted media, so, board is basically bricked.

We have the beginnings of 64-bit support in there now, so I suspect something there is breaking Edison. Can you bisect it?

I don't think so, because each iteration would require to port patches on it. It might take days/weeks since it's not a main work for me.

Quoted 9 lines
Quoted 4 lines

I dunno how to debug this since Tangier/Edison support is not (yet) in U-Boot upstream.

Any hints?

Hmmm it would be good to get this support into mainline so we can avoid these sorts of problems. I did get the files at some point but have not made time to do it. Do you know if anyone is planning to do this?

Quoted 6 lines

Seems we are doing this.

Quoted 1 line

From memory the patches looked pretty clean.

Can you point to the patches repository or any mail archive which we can look at?

Sure - can you please send me an email from your Intel address?

Quoted 3 lines

Currently our work based on latest stuff from github:01org/edison-u-boot repository.
There patches for our opinion are quite far from upstream quality.

Regards,
Simon