Skip to contentSkip to conversation

x86/boot changes for v4.11

GIT PULL Ingo Molnar 1 participant 1 message Feb 20, 2017 x86

lore
Share & tools
lore
#0 lore raw

Linus,

Please pull the latest x86-boot-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-boot-for-linus

# HEAD: 5773ebfee729acf93b330664eab4c8d77edc2193 x86/kconfig: Remove misleading note regarding hibernation and KASLR

Misc updates: fix e820 error handling, convert page table setup code from assembly to C, fix kexec environment bug, plus small cleanups.

Thanks,

Ingo

------------------>
Arnd Bergmann (1):

      x86/e820/32: Fix e820_search_gap() error handling on x86-32

Boris Ostrovsky (1):
x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C

Dave Jiang (1):
x86/boot: Fix KASLR and memmap= collision

Niklas Cassel (1):
x86/kconfig: Remove misleading note regarding hibernation and KASLR

Wei Yang (1):
x86/e820: Make e820_search_gap() static and remove unused variables

 arch/x86/Kconfig                  |   4 --
 arch/x86/boot/boot.h              |   1 +
 arch/x86/boot/compressed/kaslr.c  | 140 +++++++++++++++++++++++++++++++++++++-
 arch/x86/boot/string.c            |  13 ++++
 arch/x86/include/asm/e820.h       |   2 -
 arch/x86/include/asm/pgtable_32.h |  32 +++++++++
 arch/x86/kernel/e820.c            |  22 +++---
 arch/x86/kernel/head32.c          |  62 +++++++++++++++++
 arch/x86/kernel/head_32.S         | 121 ++------------------------------
 9 files changed, 261 insertions(+), 136 deletions(-)
arch/x86/Kconfig +0 -4
index e487493bbd47..4e6dbca03aed 100644
@@ -1994,10 +1994,6 @@ config RANDOMIZE_BASE
 	  theoretically possible, but the implementations are further
 	  limited due to memory layouts.
 
-	  If CONFIG_HIBERNATE is also enabled, KASLR is disabled at boot
-	  time. To enable it, boot with "kaslr" on the kernel command
-	  line (which will also disable hibernation).
-
 	  If unsure, say N.
 
 # Relocation on x86 needs some additional build support
arch/x86/boot/boot.h +1 -0
index e5612f3e3b57..9b42b6d1e902 100644
@@ -333,6 +333,7 @@ size_t strnlen(const char *s, size_t maxlen);
 unsigned int atou(const char *s);
 unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base);
 size_t strlen(const char *s);
+char *strchr(const char *s, int c);
 
 /* tty.c */
 void puts(const char *);
arch/x86/boot/compressed/kaslr.c +137 -3

183 lines not on this page · raw message

arch/x86/boot/string.c +13 -0
index 9e240fcba784..5457b02fc050 100644
@@ -156,3 +156,16 @@ char *strstr(const char *s1, const char *s2)
 	}
 	return NULL;
 }
+
+/**
+ * strchr - Find the first occurrence of the character c in the string s.
+ * @s: the string to be searched
+ * @c: the character to search for
+ */
+char *strchr(const char *s, int c)
+{
+	while (*s != (char)c)
+		if (*s++ == '\0')
+			return NULL;
+	return (char *)s;
+}
arch/x86/include/asm/e820.h +0 -2
index ec23d8e1297c..67313f3a9874 100644
@@ -30,8 +30,6 @@ extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
 			     int checktype);
 extern void update_e820(void);
 extern void e820_setup_gap(void);
-extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
-			unsigned long start_addr, unsigned long long end_addr);
 struct setup_data;
 extern void parse_e820_ext(u64 phys_addr, u32 data_len);
 
arch/x86/include/asm/pgtable_32.h +32 -0
index b6c0b404898a..fbc73360aea0 100644
@@ -27,6 +27,7 @@ struct vm_area_struct;
 
 extern pgd_t swapper_pg_dir[1024];
 extern pgd_t initial_page_table[1024];
+extern pmd_t initial_pg_pmd[];
 
 static inline void pgtable_cache_init(void) { }
 static inline void check_pgt_cache(void) { }
@@ -75,4 +76,35 @@ do {						\
 #define kern_addr_valid(kaddr)	(0)
 #endif
 
+/*
+ * This is how much memory in addition to the memory covered up to
+ * and including _end we need mapped initially.
+ * We need:
+ *     (KERNEL_IMAGE_SIZE/4096) / 1024 pages (worst case, non PAE)
+ *     (KERNEL_IMAGE_SIZE/4096) / 512 + 4 pages (worst case for PAE)
+ *
+ * Modulo rounding, each megabyte assigned here requires a kilobyte of
+ * memory, which is currently unreclaimed.
+ *
+ * This should be a multiple of a page.
+ *
+ * KERNEL_IMAGE_SIZE should be greater than pa(_end)
+ * and small than max_low_pfn, otherwise will waste some page table entries
+ */
+#if PTRS_PER_PMD > 1
+#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
+#else
+#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
+#endif
+
+/*
+ * Number of possible pages in the lowmem region.
+ *
+ * We shift 2 by 31 instead of 1 by 32 to the left in order to avoid a
+ * gas warning about overflowing shift count when gas has been compiled
+ * with only a host target support using a 32-bit type for internal
+ * representation.
+ */
+#define LOWMEM_PAGES ((((2<<31) - __PAGE_OFFSET) >> PAGE_SHIFT))
+
 #endif /* _ASM_X86_PGTABLE_32_H */
arch/x86/kernel/e820.c +9 -13
index 90e8dde3ec26..b2bbad6ebe4d 100644
@@ -580,24 +580,19 @@ static void __init update_e820_saved(void)
 }
 #define MAX_GAP_END 0x100000000ull
 /*
- * Search for a gap in the e820 memory space from start_addr to end_addr.
+ * Search for a gap in the e820 memory space from 0 to MAX_GAP_END.
  */
-__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
-		unsigned long start_addr, unsigned long long end_addr)
+static int __init e820_search_gap(unsigned long *gapstart,
+		unsigned long *gapsize)
 {
-	unsigned long long last;
+	unsigned long long last = MAX_GAP_END;
 	int i = e820->nr_map;
 	int found = 0;
 
-	last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
-
 	while (--i >= 0) {
 		unsigned long long start = e820->map[i].addr;
 		unsigned long long end = start + e820->map[i].size;
 
-		if (end < start_addr)
-			continue;
-
 		/*
 		 * Since "last" is at most 4GB, we know we'll
 		 * fit in 32 bits if this condition is true
@@ -628,18 +623,19 @@ __init void e820_setup_gap(void)
 	unsigned long gapstart, gapsize;
 	int found;
 
-	gapstart = 0x10000000;
 	gapsize = 0x400000;
-	found  = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
+	found  = e820_search_gap(&gapstart, &gapsize);
 
-#ifdef CONFIG_X86_64
 	if (!found) {
+#ifdef CONFIG_X86_64
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
 		printk(KERN_ERR
 	"e820: cannot find a gap in the 32bit address range\n"
 	"e820: PCI devices with unassigned 32bit BARs may break!\n");
-	}
+#else
+		gapstart = 0x10000000;
 #endif
+	}
 
 	/*
 	 * e820_reserve_resources_late protect stolen RAM already
arch/x86/kernel/head32.c +62 -0

65 lines not on this page · raw message

arch/x86/kernel/head_32.S +7 -114

153 lines not on this page · raw message