Skip to contentSkip to conversation

ARM: dts: sun8i-h3: Add mmc2 node to the X2

PATCH New codekipper at gmail.com 2 participants 2 messages Feb 20, 2017 – Feb 21, 2017

Subsystems (2)
Device tree bindings Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

codekipper at gmail.com

author
#0 lore raw

PATCH 1/1 ARM: dts: sun8i-h3: Add mmc2 node to the X2

From: Marcus Cooper <[email protected]>

The Beelink X2 has an on-board eMMC so add a node enabling the mmc2 controller.

Signed-off-by Marcus Cooper <[email protected]>
---
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +10 -0
index 25b225b7dfd6..04b04fb99a51 100644
@@ -138,6 +138,16 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
Signature · 1 line
2.11.1
Applied
#1 lore raw

PATCH 1/1 ARM: dts: sun8i-h3: Add mmc2 node to the X2

Quoted 6 lines · codekipper at gmail.com

From: Marcus Cooper <[email protected]>

The Beelink X2 has an on-board eMMC so add a node enabling the mmc2 controller.

Signed-off-by Marcus Cooper <[email protected]>

Applied.

Thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/5ab14a2c/attachment.sig>