drm/915/glk: Enable pooled EUs for Geminilake
Subsystems (2)
PATCH 1/1 drm/915/glk: Enable pooled EUs for Geminilake
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit e015dd69b2cf ("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but the only userspace that uses this only cares about the 3x6 configuration. See Beignet's commit 6901899ec90a ("Runtime: set the sub slice according to kernel pooled EU configure.").
--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_device_info.c +5 -4
@@ -195,8 +195,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)IS_GEN9_LP (dev_priv) &&sseu_subslice_total (sseu) >1 ; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires * Pooled EU to be enabled as a WA. The pool configuration
@@ -204,9 +206,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)* doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8 (sseu->subslice_mask) ==3 ) || - (hweight8 (sseu->subslice_mask) ==2 && -INTEL_REVID (dev_priv) <BXT_REVID_C0 )); + info->has_pooled_eu |= (hweight8 (sseu->subslice_mask) ==2 && +IS_BXT_REVID (dev_priv,0 ,BXT_REVID_B_LAST )); sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) {
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/915/glk: Enable pooled EUs for Geminilake
== Series Details ==
== Series Details ==
Series: drm/915/glk: Enable pooled EUs for Geminilake
URL : https://patchwork.freedesktop.org/series/20212/
State : success
== Summary ==
Series 20212v1 drm/915/glk: Enable pooled EUs for Geminilake
https://patchwork.freedesktop.org/api/1.0/series/20212/revisions/1/mbox/
fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 fi-bxt-t5700 total:108 pass:95 dwarn:0 dfail:0 fail:0 skip:12 fi-byt-j1900 total:278 pass:251 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 fi-kbl-7500u total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29
01167ae51701c05da0671c30d3695ed98f62abbf drm-tip: 2017y-02m-24d-12h-48m-26s UTC integration manifest ffdb1cb drm/915/glk: Enable pooled EUs for Geminilake
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3959/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
We suggest GLK could disable pooled EUs for 2x6 configurations too. As I understand, 2x6 a pool must consist of a complete subslice, 12EUs, right? If so, only 64K SLM are valid, I am afraid it may affect some case's performance.
Quoted 64 lines
-----Original Message-----
From: Conselvan De Oliveira, Ander
Sent: Friday, February 24, 2017 21:13
To: [email protected]
Cc: Conselvan De Oliveira, Ander <[email protected]>; Arun Siluvery <[email protected]>; Kuoppala, Mika <[email protected]>; Ursulin, Tvrtko <[email protected]>; Yang, Rong R <[email protected]>
Subject: [PATCH] drm/915/glk: Enable pooled EUs for GeminilakeGeminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit
e015dd69b2cf("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but the only userspace that uses this only cares about the 3x6 configuration. See Beignet's commit6901899ec90a("Runtime: set the sub slice according to kernel pooled EU configure.").Cc: Arun Siluvery <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Yang Rong <[email protected]>
Signed-off-by: Ander Conselvan de Oliveira
<[email protected]>--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/intel_device_info.c +3
-1@@ -195,8 +195,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv) IS_GEN9_LP(dev_priv) && sseu_subslice_total(sseu) > 1; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires drivers/gpu/drm/i915/intel_device_info.c +0
-1* Pooled EU to be enabled as a WA. The pool configuration @@ -204,9 +206,8 @@ static void gen9_sseu_info_init(structdrm_i915_private *dev_priv) * doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8(sseu->subslice_mask) ==3) ||
drivers/gpu/drm/i915/intel_device_info.c +0
-2- (hweight8 (sseu->subslice_mask) ==2 && - INTEL_REVID(dev_priv) <
BXT_REVID_C0));drivers/gpu/drm/i915/intel_device_info.c +1
-0+ info->has_pooled_eu |= (hweight8(sseu->subslice_mask) ==2 &&
drivers/gpu/drm/i915/intel_device_info.c +1
-0+ IS_BXT_REVID(dev_priv, 0,
BXT_REVID_B_LAST));drivers/gpu/drm/i915/intel_device_info.c +0
-1sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) { --
Quoted 1 line
2.9.3
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 1 line · Rong R
We suggest GLK could disable pooled EUs for 2x6 configurations too.
This patch does that. I tried to say that in the commit message but now that I re-read I see it doesn't really say it.
Quoted 1 line
As I understand, 2x6 a pool must consist of a complete subslice, 12EUs, right?
That's my understanding too.
Ander
Quoted 63 lines
If so, only 64K SLM are valid, I am afraid it may affect some case's performance.
Quoted 61 lines
-----Original Message-----
From: Conselvan De Oliveira, Ander
Sent: Friday, February 24, 2017 21:13
To: [email protected]
Cc: Conselvan De Oliveira, Ander <[email protected]>; Arun Siluvery <[email protected]>; Kuoppala, Mika <[email protected]>; Ursulin, Tvrtko <[email protected]>; Yang, Rong R <[email protected]>
Subject: [PATCH] drm/915/glk: Enable pooled EUs for GeminilakeGeminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit
e015dd69b2cf("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but the only userspace that uses this only cares about the 3x6 configuration. See Beignet's commit6901899ec90a("Runtime: set the sub slice according to kernel pooled EU configure.").Cc: Arun Siluvery <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Yang Rong <[email protected]>
Signed-off-by: Ander Conselvan de Oliveira
<[email protected]>--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/intel_device_info.c +3
-1@@ -195,8 +195,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv) IS_GEN9_LP(dev_priv) && sseu_subslice_total(sseu) > 1; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires drivers/gpu/drm/i915/intel_device_info.c +0
-1* Pooled EU to be enabled as a WA. The pool configuration @@ -204,9 +206,8 @@ static void gen9_sseu_info_init(structdrm_i915_private *dev_priv) * doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8(sseu->subslice_mask) ==3) ||
drivers/gpu/drm/i915/intel_device_info.c +0
-2- (hweight8 (sseu->subslice_mask) ==2 && - INTEL_REVID(dev_priv) <
BXT_REVID_C0));drivers/gpu/drm/i915/intel_device_info.c +1
-0+ info->has_pooled_eu |= (hweight8(sseu->subslice_mask) ==2 &&
drivers/gpu/drm/i915/intel_device_info.c +1
-0+ IS_BXT_REVID(dev_priv, 0,
BXT_REVID_B_LAST));
Quoted 9 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_device_info.c +0
-1sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) { --2.9.3
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Ander Conselvan de Oliveira <[email protected]>
Quoted 8 lines · writes:
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit
e015dd69b2cf("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but the only userspace that uses this only cares about the 3x6 configuration. See Beignet's commit6901899ec90a("Runtime: set the sub slice according to kernel pooled EU configure.").
In patch subject s/915/i915.
Also could you add explicitly that with glk, we dont tell userspace that pooling is supported if configuration is 2x6. Apparently to be on the safe side and that we can later lift this restriction if it doesn't affect the performance.
-Mika
Quoted 44 lines
Cc Arun Siluvery <[email protected]>Cc Mika Kuoppala <[email protected]>Cc Tvrtko Ursulin <[email protected]>Cc Yang Rong <[email protected]>Signed-off-by Ander Conselvan de Oliveira <[email protected]>--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/intel_device_info.c +5
-4@@ -195,8 +195,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)IS_GEN9_LP (dev_priv) &&sseu_subslice_total (sseu) >1 ; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires * Pooled EU to be enabled as a WA. The pool configuration @@ -204,9 +206,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)* doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8 (sseu->subslice_mask) ==3 ) || - (hweight8 (sseu->subslice_mask) ==2 && -INTEL_REVID (dev_priv) <BXT_REVID_C0 )); + info->has_pooled_eu |= (hweight8 (sseu->subslice_mask) ==2 && +IS_BXT_REVID (dev_priv,0 ,BXT_REVID_B_LAST )); sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) {Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/glk: Enable pooled EUs for Geminilake
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit e015dd69b2cf ("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but it is applied anyway to be on the safe side. That restriction can be lifted later if determined not to impact performance.
The extra restriction should not impact user space either. The only user space that uses this feature is Beignet, and it only does so for 3x6 devices. See See Beignet's commit 6901899ec90a ("Runtime: set the sub slice according to kernel pooled EU configure.").
v2: Improve commit message. (Mika, Roy)
--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_device_info.c +5 -4
@@ -197,8 +197,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)IS_GEN9_LP (dev_priv) &&sseu_subslice_total (sseu) >1 ; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires * Pooled EU to be enabled as a WA. The pool configuration
@@ -206,9 +208,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)* doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8 (sseu->subslice_mask) ==3 ) || - (hweight8 (sseu->subslice_mask) ==2 && -INTEL_REVID (dev_priv) <BXT_REVID_C0 )); + info->has_pooled_eu |= (hweight8 (sseu->subslice_mask) ==2 && +IS_BXT_REVID (dev_priv,0 ,BXT_REVID_B_LAST )); sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) {
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/915/glk: Enable pooled EUs for Geminilake (rev2)
In reply to Ander Conselvan de Oliveira== Series Details ==
== Series Details ==
Series: drm/915/glk: Enable pooled EUs for Geminilake (rev2)
URL : https://patchwork.freedesktop.org/series/20212/
State : success
== Summary ==
Series 20212v2 drm/915/glk: Enable pooled EUs for Geminilake
https://patchwork.freedesktop.org/api/1.0/series/20212/revisions/2/mbox/
Test kms_pipe_crc_basic:
Subgroup read-crc-pipe-a:
dmesg-warn -> PASS (fi-byt-n2820) fdo#100094fdo#100094 https://bugs.freedesktop.org/show_bug.cgi?id=100094
fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 time: 460s fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 time: 573s fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 time: 532s fi-bxt-t5700 total:278 pass:258 dwarn:0 dfail:0 fail:0 skip:20 time: 562s fi-byt-j1900 total:278 pass:251 dwarn:0 dfail:0 fail:0 skip:27 time: 502s fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 time: 497s fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 437s fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 428s fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 time: 439s fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 510s fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 488s fi-kbl-7500u total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 487s fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 480s fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 time: 599s fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 time: 478s fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 515s fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time: 542s fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29 time: 423s
a201103b5beed97d7ee2f86624d83b1fd7f1c117 drm-tip: 2017y-03m-17d-13h-05m-28s UTC integration manifest b54f395 drm/i915/glk: Enable pooled EUs for Geminilake
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4218/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/glk: Enable pooled EUs for Geminilake
In reply to Ander Conselvan de OliveiraAnder Conselvan de Oliveira <[email protected]>
Quoted 13 lines · writes:
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit
e015dd69b2cf("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but it is applied anyway to be on the safe side. That restriction can be lifted later if determined not to impact performance.The extra restriction should not impact user space either. The only user space that uses this feature is Beignet, and it only does so for 3x6 devices. See See Beignet's commit
6901899ec90a("Runtime: set the sub slice according to kernel pooled EU configure.").
Quoted 7 lines
v2: Improve commit message. (Mika, Roy)
Cc Arun Siluvery <[email protected]>Cc Mika Kuoppala <[email protected]>Cc Tvrtko Ursulin <[email protected]>Cc Yang Rong <[email protected]>Signed-off-by Ander Conselvan de Oliveira <[email protected]>
Quoted 39 lines
--- drivers/gpu/drm/i915/intel_device_info.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/intel_device_info.c +5
-4@@ -197,8 +197,10 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)IS_GEN9_LP (dev_priv) &&sseu_subslice_total (sseu) >1 ; sseu->has_eu_pg = sseu->eu_per_subslice >2 ; -if (IS_BROXTON (dev_priv)) { +if (IS_GEN9_LP (dev_priv)) {#define IS_SS_DISABLED (ss) (!(sseu->subslice_mask & BIT(ss))) + info->has_pooled_eu =hweight8 (sseu->subslice_mask) ==3 ; +/* * There is a HW issue in 2x6 fused down parts that requires * Pooled EU to be enabled as a WA. The pool configuration @@ -206,9 +208,8 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)* doesn't affect if the device has all 3 subslices enabled. */ /* WaEnablePooledEuFor2x6:bxt */ - info->has_pooled_eu = ((hweight8 (sseu->subslice_mask) ==3 ) || - (hweight8 (sseu->subslice_mask) ==2 && -INTEL_REVID (dev_priv) <BXT_REVID_C0 )); + info->has_pooled_eu |= (hweight8 (sseu->subslice_mask) ==2 && +IS_BXT_REVID (dev_priv,0 ,BXT_REVID_B_LAST )); sseu->min_eu_in_pool =0 ;if (info->has_pooled_eu) {Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/glk: Enable pooled EUs for Geminilake
In reply to Ander Conselvan de OliveiraAnder Conselvan de Oliveira <[email protected]>
Quoted 13 lines · writes:
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations from commit
e015dd69b2cf("drm/i915/bxt: Add WaEnablePooledEuFor2x6") should also apply to GLK, but it is applied anyway to be on the safe side. That restriction can be lifted later if determined not to impact performance.The extra restriction should not impact user space either. The only user space that uses this feature is Beignet, and it only does so for 3x6 devices. See See Beignet's commit
6901899ec90a("Runtime: set the sub slice according to kernel pooled EU configure.").
Quoted 7 lines
v2: Improve commit message. (Mika, Roy)
Cc Arun Siluvery <[email protected]>Cc Mika Kuoppala <[email protected]>Cc Tvrtko Ursulin <[email protected]>Cc Yang Rong <[email protected]>Signed-off-by Ander Conselvan de Oliveira <[email protected]>
Pushed, thanks for patch and review.
-Mika
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx