Set console speed to 115200 on mx6cuboxi.
PATCH 1/1 Set console speed to 115200 on mx6cuboxi.
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by Vagrant Cascadian <[email protected]>
---
include/configs/mx6cuboxi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/mx6cuboxi.h +1 -1
@@ -84,7 +84,7 @@"initrd_high=0xffffffff\0" \"fdt_high=0xffffffff\0" \"ip_dyn=yes\0" \ -"console=" CONSOLE_DEV "\0" \ +"console=" CONSOLE_DEV ",115200\0" \"bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \"update_sd_firmware=" \
Signature · 1 line
2.11.0
PATCH 1/1 Set console speed to 115200 on mx6cuboxi.
Quoted 5 lines · Vagrant Cascadian
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by Vagrant Cascadian <[email protected]>
Reviewed-by Fabio Estevam <[email protected]>
PATCH 1/1 Set console speed to 115200 on mx6cuboxi.
In reply to Vagrant CascadianQuoted 16 lines · Vagrant Cascadian
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by Vagrant Cascadian <[email protected]>---
include/configs/mx6cuboxi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/mx6cuboxi.h +0
-0
include/configs/mx6cuboxi.h line 90
Quoted 8 lines
include/configs/mx6cuboxi.h +1
-1@@ -84,7 +84,7 @@"initrd_high=0xffffffff\0" \"fdt_high=0xffffffff\0" \"ip_dyn=yes\0" \ -"console=" CONSOLE_DEV "\0" \ +"console=" CONSOLE_DEV ",115200\0" \"bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \"update_sd_firmware=" \
Applied to u-boot-imx, thanks!
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================