Skip to contentSkip to conversation

Make PPS into a menuconfig to ease disabling

PATCH In review Vincent Legoll 2 participants 3 messages Apr 11, 2017 – May 9, 2017 PPS support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Make PPS into a menuconfig to ease disabling

So that there's no need to get into the submenu to disable all related config entries.

The BROKEN PPS_GENERATOR_PARPORT now also depends on PPS

---
 drivers/pps/Kconfig            | 12 +++---------
 drivers/pps/clients/Kconfig    |  6 ++----
 drivers/pps/generators/Kconfig |  3 ++-
 3 files changed, 7 insertions(+), 14 deletions(-)
drivers/pps/Kconfig +3 -9
index 564a51a..4b29a71 100644
@@ -2,9 +2,7 @@
 # PPS support configuration
 #
 
-menu "PPS support"
-
-config PPS
+menuconfig PPS
 	tristate "PPS support"
 	---help---
 	  PPS (Pulse Per Second) is a special pulse provided by some GPS
@@ -20,10 +18,10 @@ config PPS
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called pps_core.ko.
-if PPS
 
 config PPS_DEBUG
 	bool "PPS debugging messages"
+	depends on PPS
 	help
 	  Say Y here if you want the PPS support to produce a bunch of debug
 	  messages to the system log.  Select this if you are having a
@@ -31,17 +29,13 @@ config PPS_DEBUG
 
 config NTP_PPS
 	bool "PPS kernel consumer support"
-	depends on !NO_HZ_COMMON
+	depends on PPS && !NO_HZ_COMMON
 	help
 	  This option adds support for direct in-kernel time
 	  synchronization using an external PPS signal.
 
 	  It doesn't work on tickless systems at the moment.
 
-endif
-
 source drivers/pps/clients/Kconfig
 
 source drivers/pps/generators/Kconfig
-
-endmenu
drivers/pps/clients/Kconfig +2 -4
index 0c9f280..efec021 100644
@@ -2,12 +2,12 @@
 # PPS clients configuration
 #
 
-if PPS
-
 comment "PPS clients support"
+	depends on PPS
 
 config PPS_CLIENT_KTIMER
 	tristate "Kernel timer client (Testing client, use for debug)"
+	depends on PPS
 	help
 	  If you say yes here you get support for a PPS debugging client
 	  which uses a kernel timer to generate the PPS signal.
@@ -37,5 +37,3 @@ config PPS_CLIENT_GPIO
 	  GPIO. To be useful you must also register a platform device
 	  specifying the GPIO pin and other options, usually in your board
 	  setup.
-
-endif
drivers/pps/generators/Kconfig +2 -1
index e4c4f3d..86b5937 100644
@@ -3,10 +3,11 @@
 #
 
 comment "PPS generators support"
+	depends on PPS
 
 config PPS_GENERATOR_PARPORT
 	tristate "Parallel port PPS signal generator"
-	depends on PARPORT && BROKEN
+	depends on PPS && PARPORT && BROKEN
 	help
 	  If you say yes here you get support for a PPS signal generator which
 	  utilizes STROBE pin of a parallel port to send PPS signals. It uses
Signature · 1 line
2.9.3
#1 lore raw

Hello,

Any feedback on this ?
Should I forward it to someone else ?

Thanks

Signature · 1 line
Vincent Legoll
maintainer Acked-by on v1 1/1
#2 lore raw
In reply to Vincent Legoll
Quoted 6 lines · Vincent Legoll

So that there's no need to get into the submenu to disable all related config entries.

The BROKEN PPS_GENERATOR_PARPORT now also depends on PPS

Signature · 7 lines
HCE Engineering                      e-mail: [email protected]
GNU/Linux Solutions                          [email protected]
Linux Device Driver                          [email protected]
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti
Cosino Project - the quick prototyping embedded system - www.cosino.io
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it