lib/raid6: Build proper files on corresponding arch
PATCH 1/2 lib/raid6: Build proper files on corresponding arch
Previously the raid6 test Makefile did not correctly build the files for testing on PowerPC. This patch fixes the bug, so that all appropriate files for PowerPC are built.
--- lib/raid6/test/Makefile | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
lib/raid6/test/Makefile +5 -3
@@ -44,10 +44,12 @@ else ifeq ($(HAS_NEON),yes) CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1 else HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\ - gcc -c -x c - >&/dev/null && \ - rm ./-.o && echo yes) + gcc -c -x c - >/dev/null && rm ./-.o && echo yes) ifeq ($(HAS_ALTIVEC),yes) - OBJS += altivec1.o altivec2.o altivec4.o altivec8.o + CFLAGS += -I../../../arch/powerpc/include + CFLAGS += -DCONFIG_ALTIVEC + OBJS += altivec1.o altivec2.o altivec4.o altivec8.o \ + vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o endif endif ifeq ($(ARCH),tilegx)
Signature · 1 line
2.9.3
PATCH v3 2/2 raid6/altivec: Add vpermxor implementation for raid6 Q syndrome
The raid6 Q syndrome check has been optimised using the vpermxor instruction. This instruction was made available with POWER8, ISA version 2.07. It allows for both vperm and vxor instructions to be done in a single instruction. This has been tested for correctness on a ppc64le vm with a basic RAID6 setup containing 5 drives.
The performance benchmarks are from the raid6test in the /lib/raid6/test directory. These results are from an IBM Firestone machine with ppc64le architecture. The benchmark results show a 35% speed increase over the best existing algorithm for powerpc (altivec). The raid6test has also been run on a big-endian ppc64 vm to ensure it also works for big-endian architectures.
Performance benchmarks: raid6: altivecx4 gen() 18773 MB/s raid6: altivecx8 gen() 19438 MB/s raid6: vpermxor4 gen() 25112 MB/s raid6: vpermxor8 gen() 26279 MB/s
Note: Fixed minor bug in altivec.uc regarding missing and mismatched ifdef statements.
---
Changelog
v2
- Change CONFIG_ALTIVEC to CPU_FTR_ALTIVEC_COMP
- Seperate bug fix into different patch
--- include/linux/raid/pq.h | 4 ++ lib/raid6/Makefile | 27 ++++++++++++- lib/raid6/algos.c | 4 ++ lib/raid6/altivec.uc | 3 ++ lib/raid6/test/Makefile | 14 ++++++- lib/raid6/vpermxor.uc | 104 ++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 154 insertions(+), 2 deletions(-) create mode 100644 lib/raid6/vpermxor.uc
include/linux/raid/pq.h +4 -0
@@ -107,6 +107,10 @@ extern const struct raid6_calls raid6_avx512x2;extern const struct raid6_calls raid6_avx512x4;extern const struct raid6_calls raid6_tilegx8;extern const struct raid6_calls raid6_s390vx8; +extern const struct raid6_calls raid6_vpermxor1; +extern const struct raid6_calls raid6_vpermxor2; +extern const struct raid6_calls raid6_vpermxor4; +extern const struct raid6_calls raid6_vpermxor8;struct raid6_recov_calls {void (*data2)(int ,size_t ,int ,int ,void **);
lib/raid6/Makefile +26 -1
@@ -4,7 +4,8 @@ raid6_pq-y += algos.o recov.o tables.o int1.o int2.o int4.o \ int8.o int16.o int32.o raid6_pq-$(CONFIG_X86) += recov_ssse3.o recov_avx2.o mmx.o sse1.o sse2.o avx2.o avx512.o recov_avx512.o -raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o +raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \ + vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o raid6_pq-$(CONFIG_TILEGX) += tilegx8.o raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
@@ -88,6 +89,30 @@ $(obj)/altivec8.c: UNROLL := 8 $(obj)/altivec8.c: $(src)/altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) +CFLAGS_vpermxor1.o += $(altivec_flags) +targets += vpermxor1.c +$(obj)/vpermxor1.c: UNROLL := 1 +$(obj)/vpermxor1.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE + $(call if_changed,unroll) + +CFLAGS_vpermxor2.o += $(altivec_flags) +targets += vpermxor2.c +$(obj)/vpermxor2.c: UNROLL := 2 +$(obj)/vpermxor2.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE + $(call if_changed,unroll) + +CFLAGS_vpermxor4.o += $(altivec_flags) +targets += vpermxor4.c +$(obj)/vpermxor4.c: UNROLL := 4 +$(obj)/vpermxor4.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE + $(call if_changed,unroll) + +CFLAGS_vpermxor8.o += $(altivec_flags) +targets += vpermxor8.c +$(obj)/vpermxor8.c: UNROLL := 8 +$(obj)/vpermxor8.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE + $(call if_changed,unroll) + CFLAGS_neon1.o += $(NEON_FLAGS) targets += neon1.c $(obj)/neon1.c: UNROLL := 1
lib/raid6/algos.c +4 -0
@@ -74,6 +74,10 @@ const struct raid6_calls * const raid6_algos[] = { &raid6_altivec2, &raid6_altivec4, &raid6_altivec8, + &raid6_vpermxor1, + &raid6_vpermxor2, + &raid6_vpermxor4, + &raid6_vpermxor8, #endif #if defined(CONFIG_TILEGX) &raid6_tilegx8,
lib/raid6/altivec.uc +3 -0
@@ -24,10 +24,13 @@ #include <linux/raid/pq.h> +#ifdef CONFIG_ALTIVEC + #include <altivec.h> #ifdef __KERNEL__ # include <asm/cputable.h> # include <asm/switch_to.h> +#endif /* __KERNEL__ */ /* * This is the C data type to use. We use a vector of
lib/raid6/test/Makefile +13 -1
@@ -97,6 +97,18 @@ altivec4.c: altivec.uc ../unroll.awk altivec8.c: altivec.uc ../unroll.awk $(AWK) ../unroll.awk -vN=8 < altivec.uc > $@ +vpermxor1.c: vpermxor.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=1 < vpermxor.uc > $@ + +vpermxor2.c: vpermxor.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=2 < vpermxor.uc > $@ + +vpermxor4.c: vpermxor.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=4 < vpermxor.uc > $@ + +vpermxor8.c: vpermxor.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=8 < vpermxor.uc > $@ + int1.c: int.uc ../unroll.awk $(AWK) ../unroll.awk -vN=1 < int.uc > $@
@@ -122,7 +134,7 @@ tables.c: mktables ./mktables > tables.c clean: - rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c neon*.c tables.c raid6test + rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c vpermxor*.c neon*.c tables.c raid6test rm -f tilegx*.c spotless: clean
lib/raid6/vpermxor.uc new file +104 -0
104 lines not on this page · raw message
Signature · 1 line
2.9.3
Quoted 7 lines · Matt Brown
lib/raid6/test/Makefile +0
-0@@ -44,10 +44,12 @@ else ifeq ($(HAS_NEON),yes) CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1 else
lib/raid6/test/Makefile else ifeq ($(HAS_NEON),yes) · line 52
Quoted 10 lines
lib/raid6/test/Makefile +5
-3HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\ - gcc -c -x c - >&/dev/null && \ - rm ./-.o && echo yes) + gcc -c -x c - >/dev/null && rm ./-.o && echo yes) ifeq ($(HAS_ALTIVEC),yes) - OBJS += altivec1.o altivec2.o altivec4.o altivec8.o + CFLAGS += -I../../../arch/powerpc/include + CFLAGS += -DCONFIG_ALTIVEC + OBJS += altivec1.o altivec2.o altivec4.o altivec8.o \ + vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o
The whitespace in here is a bit of a mess, but you should follow what's there and use spaces to indent your additions.
cheers
Quoted 14 lines · Michael Ellerman
Quoted 12 lines · Matt Brown
lib/raid6/test/Makefile +1
-2@@ -44,10 +44,12 @@ else ifeq ($(HAS_NEON),yes) CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1 else HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\ - gcc -c -x c - >&/dev/null && \ - rm ./-.o && echo yes) + gcc -c -x c - >/dev/null && rm ./-.o && echo yes) ifeq ($(HAS_ALTIVEC),yes)
Quoted 8 lines
lib/raid6/test/Makefile else ifeq ($(HAS_NEON),yes) · line 52
Quoted 5 lines
lib/raid6/test/Makefile +4
-1- OBJS += altivec1.o altivec2.o altivec4.o altivec8.o + CFLAGS += -I../../../arch/powerpc/include + CFLAGS += -DCONFIG_ALTIVEC + OBJS += altivec1.o altivec2.o altivec4.o altivec8.o \ + vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.oThe whitespace in here is a bit of a mess, but you should follow what's there and use spaces to indent your additions.
My apologies for steering you in the wrong direction here Matt!
Also, should the changes to altivec.uc in patch 2 be part of this patch? From memory they are also needed to run the tests?
Regards,
Daniel
Quoted 2 lines
cheers