ASoC: bytcr_rt5640: Allow quirk set via module option
Subsystems (3)
PATCH v3 1/1 ASoC: bytcr_rt5640: Allow quirk set via module option
The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time.
This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit.
---v1->v2: override the quirk value completelyv2->v3: print the override information
sound/soc/intel/boards/bytcr_rt5640.c | 9 +++++++++ 1 file changed, 9 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +9 -0
@@ -19,6 +19,7 @@#include <linux/init.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/acpi.h> #include <linux/device.h>
@@ -58,6 +59,9 @@ struct byt_rt5640_private { };static unsigned long byt_rt5640_quirk =BYT_RT5640_MCLK_EN ; +static unsigned int quirk_override; +module_param_named (quirk, quirk_override, int,0444 ); +MODULE_PARM_DESC (quirk,"Board-specific quirk override" );static void log_quirks (struct device *dev) {
@@ -806,6 +810,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)/* check quirks before creating card */ dmi_check_system (byt_rt5640_quirk_table); +if (quirk_override) { +dev_info (&pdev->dev,"Overriding quirk %0x => 0x%x\n" , + (unsigned int )byt_rt5640_quirk, quirk_override); + byt_rt5640_quirk = quirk_override; + }log_quirks (&pdev->dev); if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
Signature · 1 line
2.11.1
Quoted 43 lines · Takashi Iwai
The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time.
This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit.
Signed-off-by Takashi Iwai <[email protected]>---
v1->v2: override the quirk value completelyv2->v3: print the override informationsound/soc/intel/boards/bytcr_rt5640.c | 9 +++++++++ 1 file changed, 9 insertions(+)sound/soc/intel/boards/bytcr_rt5640.c +4
-0@@ -19,6 +19,7 @@#include <linux/init.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/acpi.h> #include <linux/device.h> @@ -58,6 +59,9 @@ struct byt_rt5640_private { };static unsigned long byt_rt5640_quirk =BYT_RT5640_MCLK_EN ; +static unsigned int quirk_override; +module_param_named (quirk, quirk_override, int,0444 ); +MODULE_PARM_DESC (quirk,"Board-specific quirk override" );static void log_quirks (struct device *dev) {
sound/soc/intel/boards/bytcr_rt5640.c static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) · line 815
Quoted 6 lines
sound/soc/intel/boards/bytcr_rt5640.c +3
-0@@ -806,6 +810,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)/* check quirks before creating card */ dmi_check_system (byt_rt5640_quirk_table); +if (quirk_override) { +dev_info (&pdev->dev,"Overriding quirk %0x => 0x%x\n" , + (unsigned int )byt_rt5640_quirk, quirk_override);
I was talking about a more complete message that would e.g check if MCLK_EN is set when MCLK_25MHZ is set, etc. I'll add a follow-up patch, for now
Quoted 6 lines
sound/soc/intel/boards/bytcr_rt5640.c +2
-0+ byt_rt5640_quirk = quirk_override; + }log_quirks (&pdev->dev); if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
Mark Brown
maintainerApplied "ASoC: bytcr_rt5640: Allow quirk set via module option" to the asoc tree
In reply to Takashi IwaiThe patch
ASoC: bytcr_rt5640: Allow quirk set via module option
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
9f2cf73ed65b598514e4858ca3d602710718ab93Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Sun, 23 Apr 2017 09:22:56 +0200
Subject: [PATCH] ASoC: bytcr_rt5640: Allow quirk set via module option
The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time.
This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit.
--- sound/soc/intel/boards/bytcr_rt5640.c | 9 +++++++++ 1 file changed, 9 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +9 -0
@@ -19,6 +19,7 @@#include <linux/init.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/acpi.h> #include <linux/device.h>
@@ -58,6 +59,9 @@ struct byt_rt5640_private { };static unsigned long byt_rt5640_quirk =BYT_RT5640_MCLK_EN ; +static unsigned int quirk_override; +module_param_named (quirk, quirk_override, int,0444 ); +MODULE_PARM_DESC (quirk,"Board-specific quirk override" );static void log_quirks (struct device *dev) {
@@ -806,6 +810,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)/* check quirks before creating card */ dmi_check_system (byt_rt5640_quirk_table); +if (quirk_override) { +dev_info (&pdev->dev,"Overriding quirk %0x => 0x%x\n" , + (unsigned int )byt_rt5640_quirk, quirk_override); + byt_rt5640_quirk = quirk_override; + }log_quirks (&pdev->dev); if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
Signature · 1 line
2.11.0