Skip to contentSkip to conversation

drm/i915/guc: Enable send function only after successful init

PATCH In review Michal Wajdeczko 3 participants 7 messages May 2, 2017 – May 3, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/i915/guc: Enable send function only after successful init

It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism.

---
 drivers/gpu/drm/i915/intel_uc.c | 27 ++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_uc.h |  1 +
 2 files changed, 27 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_uc.c +26 -1
index 900e376..5957a95 100644
@@ -99,7 +99,7 @@ void intel_uc_init_early(struct drm_i915_private *dev_priv)
 	struct intel_guc *guc = &dev_priv->guc;
 
 	mutex_init(&guc->send_mutex);
-	guc->send = intel_guc_send_mmio;
+	guc->send = intel_guc_send_nop;
 }
 
 static void fetch_uc_fw(struct drm_i915_private *dev_priv,
@@ -252,13 +252,27 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static int guc_enable_communication(struct intel_guc *guc)
+{
+	/* XXX: placeholder for alternate setup */
+	guc->send = intel_guc_send_mmio;
+	return 0;
+}
+
+static void guc_disable_communication(struct intel_guc *guc)
+{
+	guc->send = intel_guc_send_nop;
+}
+
 int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 {
+	struct intel_guc *guc = &dev_priv->guc;
 	int ret, attempts;
 
 	if (!i915.enable_guc_loading)
 		return 0;
 
+	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
 	/* We need to notify the guc whenever we change the GGTT */
@@ -308,6 +322,10 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		goto err_submission;
 
+	ret = guc_enable_communication(guc);
+	if (ret)
+		goto err_submission;
+
 	intel_guc_auth_huc(dev_priv);
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
@@ -330,6 +348,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
+	guc_disable_communication(guc);
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
 	if (i915.enable_guc_submission)
@@ -364,6 +383,12 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	i915_ggtt_disable_guc(dev_priv);
 }
 
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	WARN(1, "Unexpected send: action=%#x\n", *action);
+	return -ENOSYS;
+}
+
 /*
  * This function implements the MMIO based host to GuC interface.
  */
drivers/gpu/drm/i915/intel_uc.h +1 -0
index 2f0229d..1e0eecd 100644
@@ -227,6 +227,7 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 int intel_guc_sample_forcewake(struct intel_guc *guc);
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len);
 int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len);
 static inline int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len)
 {
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 2/2 HAX Enable GuC loading & submission

This is just for CI testing, *** DO NOT MERGE ***

---
 drivers/gpu/drm/i915/i915_params.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_params.c +4 -4
index b6a7e36..abd2894 100644
@@ -56,8 +56,8 @@ struct i915_params i915 __read_mostly = {
 	.verbose_state_checks = 1,
 	.nuclear_pageflip = 0,
 	.edp_vswing = 0,
-	.enable_guc_loading = 0,
-	.enable_guc_submission = 0,
+	.enable_guc_loading = 1,
+	.enable_guc_submission = 1,
 	.guc_log_level = -1,
 	.guc_firmware_path = NULL,
 	.huc_firmware_path = NULL,
@@ -221,12 +221,12 @@ MODULE_PARM_DESC(edp_vswing,
 module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading, int, 0400);
 MODULE_PARM_DESC(enable_guc_loading,
 		"Enable GuC firmware loading "
-		"(-1=auto, 0=never [default], 1=if available, 2=required)");
+		"(-1=auto, 0=never, 1=if available [default], 2=required)");
 
 module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, int, 0400);
 MODULE_PARM_DESC(enable_guc_submission,
 		"Enable GuC submission "
-		"(-1=auto, 0=never [default], 1=if available, 2=required)");
+		"(-1=auto, 0=never, 1=if available [default], 2=required)");
 
 module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
 MODULE_PARM_DESC(guc_log_level,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

✓ Fi.CI.BAT: success for series starting with [CI,1/2] drm/i915/guc: Enable send function only after successful init

In reply to Michal Wajdeczko
== Series Details ==

== Series Details ==

Series: series starting with [CI,1/2] drm/i915/guc: Enable send function only after successful init
URL : https://patchwork.freedesktop.org/series/23799/
State : success

== Summary ==

Series 23799v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/23799/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time:436s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time:428s
fi-bsw-n3050     total:278  pass:242  dwarn:0   dfail:0   fail:0   skip:36  time:574s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:491s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time:527s
fi-byt-j1900     total:278  pass:254  dwarn:0   dfail:0   fail:0   skip:24  time:493s
fi-byt-n2820     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:478s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:414s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:403s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time:414s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:483s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:461s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:453s
fi-kbl-7560u     total:278  pass:267  dwarn:1   dfail:0   fail:0   skip:10  time:555s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:438s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time:559s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time:461s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:484s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time:413s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:530s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time:402s

0d90375e6d38f986224e4dfce1674c5b093590cc drm-tip: 2017y-05m-02d-09h-11m-43s UTC integration manifest ebc37af HAX Enable GuC loading & submission
66bb87c drm/i915/guc: Enable send function only after successful init

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4592/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
In reply to Michal Wajdeczko
Quoted 74 lines · Michal Wajdeczko

It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism.

---
 drivers/gpu/drm/i915/intel_uc.c | 27 ++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_uc.h |  1 +
 2 files changed, 27 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_uc.c +20 -1
index 900e376..5957a95 100644
@@ -99,7 +99,7 @@ void intel_uc_init_early(struct drm_i915_private *dev_priv)
 	struct intel_guc *guc = &dev_priv->guc;
 
 	mutex_init(&guc->send_mutex);
-	guc->send = intel_guc_send_mmio;
+	guc->send = intel_guc_send_nop;
 }
 
 static void fetch_uc_fw(struct drm_i915_private *dev_priv,
@@ -252,13 +252,27 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static int guc_enable_communication(struct intel_guc *guc)
+{
+	/* XXX: placeholder for alternate setup */
+	guc->send = intel_guc_send_mmio;
+	return 0;
+}
+
+static void guc_disable_communication(struct intel_guc *guc)
+{
+	guc->send = intel_guc_send_nop;
+}
+
 int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 {
+	struct intel_guc *guc = &dev_priv->guc;
 	int ret, attempts;
 
 	if (!i915.enable_guc_loading)
 		return 0;
 
+	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
 	/* We need to notify the guc whenever we change the GGTT */
@@ -308,6 +322,10 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		goto err_submission;
 
+	ret = guc_enable_communication(guc);
+	if (ret)
+		goto err_submission;
+
 	intel_guc_auth_huc(dev_priv);
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
@@ -330,6 +348,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
+	guc_disable_communication(guc);
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
 	if (i915.enable_guc_submission)

drivers/gpu/drm/i915/intel_uc.c void intel_uc_fini_hw(struct drm_i915_private *dev_priv) · line 389

Quoted 7 lines
drivers/gpu/drm/i915/intel_uc.c +4 -0
@@ -364,6 +383,12 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	i915_ggtt_disable_guc(dev_priv);
 }
 
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	WARN(1, "Unexpected send: action=%#x\n", *action);
+	return -ENOSYS;

For internal errors we use -ENODEV.

I fixed that whilst applying as I'm sure no one else but checkpatch cares for a path that should never occur.

Applied and pushed, thanks for the patch and review. -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
In reply to Michal Wajdeczko
Quoted 91 lines · Michal Wajdeczko

It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism.

---
 drivers/gpu/drm/i915/intel_uc.c | 27 ++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_uc.h |  1 +
 2 files changed, 27 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_uc.c +26 -1
index 900e376..5957a95 100644
@@ -99,7 +99,7 @@ void intel_uc_init_early(struct drm_i915_private *dev_priv)
 	struct intel_guc *guc = &dev_priv->guc;
 
 	mutex_init(&guc->send_mutex);
-	guc->send = intel_guc_send_mmio;
+	guc->send = intel_guc_send_nop;
 }
 
 static void fetch_uc_fw(struct drm_i915_private *dev_priv,
@@ -252,13 +252,27 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static int guc_enable_communication(struct intel_guc *guc)
+{
+	/* XXX: placeholder for alternate setup */
+	guc->send = intel_guc_send_mmio;
+	return 0;
+}
+
+static void guc_disable_communication(struct intel_guc *guc)
+{
+	guc->send = intel_guc_send_nop;
+}
+
 int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 {
+	struct intel_guc *guc = &dev_priv->guc;
 	int ret, attempts;
 
 	if (!i915.enable_guc_loading)
 		return 0;
 
+	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
 	/* We need to notify the guc whenever we change the GGTT */
@@ -308,6 +322,10 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		goto err_submission;
 
+	ret = guc_enable_communication(guc);
+	if (ret)
+		goto err_submission;
+
 	intel_guc_auth_huc(dev_priv);
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
@@ -330,6 +348,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
+	guc_disable_communication(guc);
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
 	if (i915.enable_guc_submission)
@@ -364,6 +383,12 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	i915_ggtt_disable_guc(dev_priv);
 }
 
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	WARN(1, "Unexpected send: action=%#x\n", *action);
+	return -ENOSYS;
+}
+
 /*
  * This function implements the MMIO based host to GuC interface.
  */
drivers/gpu/drm/i915/intel_uc.h +0 -0
index 2f0229d..1e0eecd 100644

drivers/gpu/drm/i915/intel_uc.h void intel_uc_fini_fw(struct drm_i915_private *dev_priv); · line 230

Quoted 4 lines
drivers/gpu/drm/i915/intel_uc.h +1 -0
@@ -227,6 +227,7 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 int intel_guc_sample_forcewake(struct intel_guc *guc);
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len);

Was there a reason for exporting the nop? Its a purely internal BUG_ON() function that should only be set when disabling the guc. Afaict, it should be private.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw
Quoted 92 lines · Chris Wilson
Quoted 91 lines · Michal Wajdeczko

It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism.

---
 drivers/gpu/drm/i915/intel_uc.c | 27 ++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_uc.h |  1 +
 2 files changed, 27 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_uc.c +26 -1
index 900e376..5957a95 100644
@@ -99,7 +99,7 @@ void intel_uc_init_early(struct drm_i915_private *dev_priv)
 	struct intel_guc *guc = &dev_priv->guc;
 
 	mutex_init(&guc->send_mutex);
-	guc->send = intel_guc_send_mmio;
+	guc->send = intel_guc_send_nop;
 }
 
 static void fetch_uc_fw(struct drm_i915_private *dev_priv,
@@ -252,13 +252,27 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static int guc_enable_communication(struct intel_guc *guc)
+{
+	/* XXX: placeholder for alternate setup */
+	guc->send = intel_guc_send_mmio;
+	return 0;
+}
+
+static void guc_disable_communication(struct intel_guc *guc)
+{
+	guc->send = intel_guc_send_nop;
+}
+
 int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 {
+	struct intel_guc *guc = &dev_priv->guc;
 	int ret, attempts;
 
 	if (!i915.enable_guc_loading)
 		return 0;
 
+	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
 	/* We need to notify the guc whenever we change the GGTT */
@@ -308,6 +322,10 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		goto err_submission;
 
+	ret = guc_enable_communication(guc);
+	if (ret)
+		goto err_submission;
+
 	intel_guc_auth_huc(dev_priv);
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
@@ -330,6 +348,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
+	guc_disable_communication(guc);
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
 	if (i915.enable_guc_submission)
@@ -364,6 +383,12 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	i915_ggtt_disable_guc(dev_priv);
 }
 
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	WARN(1, "Unexpected send: action=%#x\n", *action);
+	return -ENOSYS;
+}
+
 /*
  * This function implements the MMIO based host to GuC interface.
  */
drivers/gpu/drm/i915/intel_uc.h +0 -0
index 2f0229d..1e0eecd 100644
@@ -227,6 +227,7 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
Quoted 8 lines

drivers/gpu/drm/i915/intel_uc.h void intel_uc_fini_fw(struct drm_i915_private *dev_priv); · line 230

Quoted 4 lines
drivers/gpu/drm/i915/intel_uc.h +1 -0
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 int intel_guc_sample_forcewake(struct intel_guc *guc);
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len);

Was there a reason for exporting the nop? Its a purely internal BUG_ON() function that should only be set when disabling the guc. Afaict, it should be private.

By looking only at this patch, agree, this nop function should be private.

But at the same time, this function, to some extend, is similar to the send_mmio function, that we agree to keep it exposed, as it also may be needed in other code paths (like upcoming alternate GuC communication implementation) in case of the recovery or other plumbing.

I should mention that in the commit message to avoid your concern ;)

-Michal

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw
Quoted 102 lines · Michal Wajdeczko
Quoted 92 lines · Chris Wilson
Quoted 91 lines · Michal Wajdeczko

It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism.

---
 drivers/gpu/drm/i915/intel_uc.c | 27 ++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_uc.h |  1 +
 2 files changed, 27 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_uc.c +26 -1
index 900e376..5957a95 100644
@@ -99,7 +99,7 @@ void intel_uc_init_early(struct drm_i915_private *dev_priv)
 	struct intel_guc *guc = &dev_priv->guc;
 
 	mutex_init(&guc->send_mutex);
-	guc->send = intel_guc_send_mmio;
+	guc->send = intel_guc_send_nop;
 }
 
 static void fetch_uc_fw(struct drm_i915_private *dev_priv,
@@ -252,13 +252,27 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static int guc_enable_communication(struct intel_guc *guc)
+{
+	/* XXX: placeholder for alternate setup */
+	guc->send = intel_guc_send_mmio;
+	return 0;
+}
+
+static void guc_disable_communication(struct intel_guc *guc)
+{
+	guc->send = intel_guc_send_nop;
+}
+
 int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 {
+	struct intel_guc *guc = &dev_priv->guc;
 	int ret, attempts;
 
 	if (!i915.enable_guc_loading)
 		return 0;
 
+	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
 	/* We need to notify the guc whenever we change the GGTT */
@@ -308,6 +322,10 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		goto err_submission;
 
+	ret = guc_enable_communication(guc);
+	if (ret)
+		goto err_submission;
+
 	intel_guc_auth_huc(dev_priv);
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
@@ -330,6 +348,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
+	guc_disable_communication(guc);
 	gen9_disable_guc_interrupts(dev_priv);
 err_submission:
 	if (i915.enable_guc_submission)
@@ -364,6 +383,12 @@ void intel_uc_fini_hw(struct drm_i915_private *dev_priv)
 	i915_ggtt_disable_guc(dev_priv);
 }
 
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len)
+{
+	WARN(1, "Unexpected send: action=%#x\n", *action);
+	return -ENOSYS;
+}
+
 /*
  * This function implements the MMIO based host to GuC interface.
  */
drivers/gpu/drm/i915/intel_uc.h +0 -0
index 2f0229d..1e0eecd 100644
@@ -227,6 +227,7 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
Quoted 8 lines

drivers/gpu/drm/i915/intel_uc.h void intel_uc_fini_fw(struct drm_i915_private *dev_priv); · line 230

Quoted 4 lines
drivers/gpu/drm/i915/intel_uc.h +1 -0
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 int intel_guc_sample_forcewake(struct intel_guc *guc);
+int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len);

Was there a reason for exporting the nop? Its a purely internal BUG_ON() function that should only be set when disabling the guc. Afaict, it should be private.

Quoted 8 lines

By looking only at this patch, agree, this nop function should be private.

But at the same time, this function, to some extend, is similar to the send_mmio function, that we agree to keep it exposed, as it also may be needed in other code paths (like upcoming alternate GuC communication implementation) in case of the recovery or other plumbing.

I should mention that in the commit message to avoid your concern ;)

Always a benefit to mention the grand design if things look out of place in individual patches. I'll be surprised if you can conjure up a situation where we want to call intel_guc_send_nop() :) -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx