Skip to contentSkip to conversation

regulator: lp8755: fix spelling mistake "acceess" -> "access"

PATCH RESEND In review Colin King 2 participants 3 messages May 10, 2017 – May 15, 2017 Voltage and current regulator framework

lore
Share & tools
lore

Colin King

author
#0 lore raw

PATCH RESEND 1/1 regulator: lp8755: fix spelling mistake "acceess" -> "access"

From: Colin Ian King <[email protected]>

Trivial fix to spelling mistake in dev_err messages.

---
 drivers/regulator/lp8755.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/regulator/lp8755.c +7 -7
index db34e1da75ef..244822bb63cd 100644
@@ -99,7 +99,7 @@ static int lp8755_buck_enable_time(struct regulator_dev *rdev)
 
 	ret = lp8755_read(pchip, 0x12 + id, &regval);
 	if (ret < 0) {
-		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+		dev_err(pchip->dev, "i2c access error %s\n", __func__);
 		return ret;
 	}
 	return (regval & 0xff) * 100;
@@ -144,7 +144,7 @@ static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -175,7 +175,7 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
 	return REGULATOR_MODE_NORMAL;
 
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return 0;
 }
 
@@ -223,7 +223,7 @@ static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -295,7 +295,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
 	return ret;
 
 out_i2c_error:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -404,7 +404,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return IRQ_NONE;
 }
 
@@ -420,7 +420,7 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
 
 	ret = lp8755_read(pchip, 0x0F, &regval);
 	if (ret < 0) {
-		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+		dev_err(pchip->dev, "i2c access error %s\n", __func__);
 		return ret;
 	}
 
Signature · 1 line
2.11.0
maintainer
#1 lore raw
Quoted 3 lines · Colin King

From: Colin Ian King <[email protected]>

Trivial fix to spelling mistake in dev_err messages.

If this is a resend why do I not seem to have a copy of this patch?

#2 lore raw
Quoted 7 lines · Mark Brown
Quoted 3 lines · Colin King

From: Colin Ian King <[email protected]>

Trivial fix to spelling mistake in dev_err messages.

If this is a resend why do I not seem to have a copy of this patch?

Probably because I goofed up. Doh.