Skip to contentSkip to conversation

cros_ec_i2c: prevent i2c timeout for EC_CMD_FLASH_ERASE

PATCH New Wei-Ning Huang 1 participant 1 message May 16, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 cros_ec_i2c: prevent i2c timeout for EC_CMD_FLASH_ERASE

From: Wei-Ning Huang <[email protected]>

Some EC chip has larger flash sector size which requires longer erase time. During erase the CPU is usually stalled and can't even respond to interrupts. We sleep a while to block any EC command from executing during the flash erase period.

---
 drivers/mfd/cros_ec_i2c.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/mfd/cros_ec_i2c.c +21 -1
index 9f70de1e4c70..c1b5c831b9cb 100644
@@ -23,6 +23,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+/*
+ * Some EC chip has larger flash sector size which requires longer erase time.
+ * During erase the CPU is usually stalled and can't even respond to
+ * interrupts. We sleep for a while to block any EC command from executing
+ * during the flash erase period to prevent i2c timeout.
+ */
+#define EC_FLASH_ERASE_DELAY_MS	5000
+
 /**
  * Request format for protocol v3
  * byte 0	0xda (EC_COMMAND_PROTOCOL_3)
@@ -120,7 +128,7 @@ static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
 		ret = -EAGAIN;
 		dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
 			msg->command);
-		goto done;
+		goto inprogress;
 
 	default:
 		dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
@@ -177,7 +185,19 @@ static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
 
 	ret = ec_response->data_len;
 
+inprogress:
+	/*
+	 * If we get EC_RES_IN_PROGRESS for EC_CMD_FLASH_ERASE this means EC
+	 * need a long time to erase flash, during flash erase CPU is stalled
+	 * and can't respond to interrupts, so we sleep for a while to stop new
+	 * EC commands from communicating with EC.
+	 */
+	if (msg->command == EC_CMD_FLASH_ERASE &&
+	    msg->result == EC_RES_IN_PROGRESS)
+		msleep(EC_FLASH_ERASE_DELAY_MS);
+
 done:
+
 	if (msg->command == EC_CMD_REBOOT_EC)
 		msleep(EC_REBOOT_DELAY_MS);
 
Signature · 1 line
2.12.2