ARM: imx6: gw54xx: use wdog1 for barebox

As Barebox isn't changing the external PMIC power rails the internal watchdog reset is fine for the Barebox reset purposes. Watchdog 2 is only usable on boards with revision E or later, as this on is incapable of executing an internal reset.

---
 arch/arm/dts/imx6q-gw54xx.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

index 8113542..ec0f363 100644
@@ -22,3 +22,11 @@
 &sata {
 	status = "okay";
 };
+
+&wdog1 {
+	status = "okay";
+};
+
+&wdog2 {
+	status = "disabled";
+};

2.9.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox