mfd: axp20x-i2c: Document that this must be builtin on x86
PATCH v6 1/1 mfd: axp20x-i2c: Document that this must be builtin on x86
On x86 the AXP288 PMIC provides an ACPI OpRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if the MFD, OpRegion and i2c-bus drivers are built-in.
Since the AXP20x MFD code is used on non x86 too we cannot simply change this into a bool, I've tried some Kconfig magic with if x86 but I could not get this working correctly, so this commit just documents that this should be built-in on x86, which fixes errors like these during boot:
mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2 ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93 ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b acpi 80860F14:02: Failed to change power state to D0
---
Changes in v2:
-Fix Kconfig depends and selects to fix warning reported by kbuild test robot -Improve commit msg (add example of ACPI errors this avoids)
Changes in v3:
-Since the AXP20x MFD code is used on ARM too where it does not necessarily
need to be builtin settle for simply documenting the need to have this builtin on x86
Changes in v5:
-Fix I2C spelling
Changes in v6:
-Various spelling fixes in the commit message
-Add Lee Jones' Acked-by
-Add russianneuromancer's Tested-by
--- drivers/mfd/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mfd/Kconfig +5 -0
@@ -160,6 +160,11 @@ config MFD_AXP20X_I2C components like regulators or the PEK (Power Enable Key) under the corresponding menus. + Note on x86 this provides an ACPI OpRegion, so this must be 'y' + (builtin) and not a module, as the OpRegion must be available as + soon as possible. For the same reason the I2C bus driver options + I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_BAYTRAIL must be 'y' too. + config MFD_AXP20X_RSB tristate "X-Powers AXP series PMICs with RSB" select MFD_AXP20X
Signature · 1 line
2.13.0
Lee Jones
AppliedQuoted 34 lines · Hans de Goede
On x86 the AXP288 PMIC provides an ACPI OpRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if the MFD, OpRegion and i2c-bus drivers are built-in.
Since the AXP20x MFD code is used on non x86 too we cannot simply change this into a bool, I've tried some
Kconfigmagic with if x86 but I could not get this working correctly, so this commit just documents that this should be built-in on x86, which fixes errors like these during boot:mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2 ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93 ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Nodeffff93543bacpi 80860F14:02: Failed to change power state to D0Signed-off-by Hans de Goede <[email protected]>Acked-by Chen-Yu Tsai <[email protected]>Tested-by russianneuromancer <[email protected]>Acked-for-MFD-by Lee Jones <[email protected]>---
Changes in v2:(quoted diff) +0
-2-Fix Kconfig depends and selects to fix warning reported by kbuild test robot -Improve commit msg (add example of ACPI errors this avoids)Changes in v3:
-Since the AXP20x MFD code is used on ARM too where it does not necessarily
need to be builtin settle for simply documenting the need to have this builtin on x86Changes in v5:
-Fix I2C spellingChanges in v6:
Review
Quoted 6 lines
(quoted diff) +0
-4-Various spelling fixes in the commit message -Add Lee Jones' Acked-by -Add russianneuromancer's Tested-by --- drivers/mfd/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
Applied, thanks.
Quoted 16 lines
drivers/mfd/Kconfig +5
-0@@ -160,6 +160,11 @@ config MFD_AXP20X_I2C components like regulators or the PEK (Power Enable Key) under the corresponding menus. + Note on x86 this provides an ACPI OpRegion, so this must be 'y' + (builtin) and not a module, as the OpRegion must be available as + soon as possible. For the same reason the I2C bus driver options + I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_BAYTRAIL must be 'y' too. + config MFD_AXP20X_RSB tristate "X-Powers AXP series PMICs with RSB" select MFD_AXP20X
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog