ASoC: add es8316 codec driver
Subsystems (3)
PATCH v4 1/2 ASoC: add es8316 codec driver
Add a codec driver for the Everest ES8316, based on code provided by David Yang from Everest Semi.
I limited the functionality to items where the vendor code was clear, and things that can be tested on the Weibu F3C (Intel Cherry Trail). As a result the initial implementation only supports running in slave mode at single speed (up to 48kHz sample rate) using I2S. HPD is not supported.
[[email protected]: significant cleanups and simplifications,
remove dead/unclear code]
---
Notes:
v4:
- use newer macros for dB scale tlv
- fix ADC PGA gain and HP Mixer gain according to datasheet
- add missing register write in probe
v3:
- move to boolean controls where appropriate
- name controls with Volume suffix where appropriate
- clean up probe routine
- control more registers with DAPM, replacing set_bias_level
- improve DAPM widget naming consistency
- fix i2c device id
v2:
- Add sign-off from David Yang
- Only support whole number rates calculated with mclk ratios
sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/es8316.c | 637 ++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/es8316.h | 129 ++++++++++ 4 files changed, 772 insertions(+) create mode 100644 sound/soc/codecs/es8316.c create mode 100644 sound/soc/codecs/es8316.h
sound/soc/codecs/Kconfig +4 -0
@@ -72,6 +72,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA9055 if I2C select SND_SOC_DIO2125 select SND_SOC_DMIC + select SND_SOC_ES8316 if I2C select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C select SND_SOC_ES7134
@@ -543,6 +544,9 @@ config SND_SOC_HDMI_CODEC config SND_SOC_ES7134 tristate "Everest Semi ES7134 CODEC" +config SND_SOC_ES8316 + tristate "Everest Semi ES8316 CODEC" + config SND_SOC_ES8328 tristate
sound/soc/codecs/Makefile +2 -0
@@ -65,6 +65,7 @@ snd-soc-da732x-objs := da732x.o snd-soc-da9055-objs := da9055.o snd-soc-dmic-objs := dmic.o snd-soc-es7134-objs := es7134.o +snd-soc-es8316-objs := es8316.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o
@@ -300,6 +301,7 @@ obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o +obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
sound/soc/codecs/es8316.c new file +637 -0
637 lines not on this page · raw message
sound/soc/codecs/es8316.h new file +129 -0
129 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH v4 2/2 ASoC: Intel: add machine driver for BYT/CHT + ES8316
Add new machine driver, tested with Weibu F3C MiniPC.
Based heavily on code provided by David Yang @ Everest, and other machine drivers in the same directory.
---
Notes:
v3:
- fix inverted logic when checking clk_prepare_enable result
- update for recent sst_acpi.c changes
v2:
- add sign-off from David Yang
- fix bytbyt typo
- mention that BYT-CR/SSP0 is not supported
- mention which mic was tested
- setup clocks at init time, avoids need for platform clock control
sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/atom/sst/sst_acpi.c | 7 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_es8316.c | 300 +++++++++++++++++++++++++++++++++ 4 files changed, 321 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_es8316.c
sound/soc/intel/Kconfig +12 -0
@@ -214,6 +214,18 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH platforms with DA7212/7213 audio codec. If unsure select "N". +config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ES8316 + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + If unsure select "N". + config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" depends on X86_INTEL_LPSS && I2C && ACPI
sound/soc/intel/atom/sst/sst_acpi.c +7 -0
@@ -625,6 +625,13 @@ static struct sst_acpi_mach sst_acpi_chv[] = { .board = "bytcht_da7213", .pdata = &chv_platform_data }, + { + .id = "ESSX8316", + .drv_name = "bytcht_es8316", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_es8316", + .pdata = &chv_platform_data + }, /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ { .id = "10EC5640",
sound/soc/intel/boards/Makefile +2 -0
@@ -11,6 +11,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o +snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o snd-soc-skl_rt286-objs := skl_rt286.o
@@ -30,6 +31,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH) += snd-soc-kbl_rt5663_max98927.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
sound/soc/intel/boards/bytcht_es8316.c new file +300 -0
300 lines not on this page · raw message
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "ASoC: add es8316 codec driver" to the asoc tree
In reply to Daniel DrakeThe patch
ASoC: add es8316 codec driver
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
b8b88b70875af786d9f346d766fa2b0630e2cf41Mon Sep 17 00:00:00 2001
From: Daniel Drake <[email protected]>
Date: Mon, 12 Jun 2017 11:01:45 -0600
Subject: [PATCH] ASoC: add es8316 codec driver
Add a codec driver for the Everest ES8316, based on code provided by David Yang from Everest Semi.
I limited the functionality to items where the vendor code was clear, and things that can be tested on the Weibu F3C (Intel Cherry Trail). As a result the initial implementation only supports running in slave mode at single speed (up to 48kHz sample rate) using I2S. HPD is not supported.
[[email protected]: significant cleanups and simplifications,
remove dead/unclear code]
--- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/es8316.c | 637 ++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/es8316.h | 129 ++++++++++ 4 files changed, 772 insertions(+) create mode 100644 sound/soc/codecs/es8316.c create mode 100644 sound/soc/codecs/es8316.h
sound/soc/codecs/Kconfig +4 -0
@@ -72,6 +72,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA9055 if I2C select SND_SOC_DIO2125 select SND_SOC_DMIC + select SND_SOC_ES8316 if I2C select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C select SND_SOC_ES7134
@@ -543,6 +544,9 @@ config SND_SOC_HDMI_CODEC config SND_SOC_ES7134 tristate "Everest Semi ES7134 CODEC" +config SND_SOC_ES8316 + tristate "Everest Semi ES8316 CODEC" + config SND_SOC_ES8328 tristate
sound/soc/codecs/Makefile +2 -0
@@ -65,6 +65,7 @@ snd-soc-da732x-objs := da732x.o snd-soc-da9055-objs := da9055.o snd-soc-dmic-objs := dmic.o snd-soc-es7134-objs := es7134.o +snd-soc-es8316-objs := es8316.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o
@@ -300,6 +301,7 @@ obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o +obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
sound/soc/codecs/es8316.c new file +637 -0
637 lines not on this page · raw message
sound/soc/codecs/es8316.h new file +129 -0
129 lines not on this page · raw message
Signature · 1 line
2.11.0