Skip to contentSkip to conversation

i40evf: use netdev variable in reset task

PATCH New Alice Michael 2 participants 11 messages Jul 11, 2017 – Jul 12, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/12 i40evf: use netdev variable in reset task

From: Alan Brady <[email protected]>

If we're going to bother initializing a variable to reference it we might as well use it.

---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/i40evf/i40evf_main.c +2 -2
index 77d2835..ef55f71 100644
@@ -1879,7 +1879,7 @@ static void i40evf_reset_task(struct work_struct *work)
 	}
 
 continue_reset:
-	if (netif_running(adapter->netdev)) {
+	if (netif_running(netdev)) {
 		netif_carrier_off(netdev);
 		netif_tx_stop_all_queues(netdev);
 		adapter->link_up = false;
@@ -1947,7 +1947,7 @@ static void i40evf_reset_task(struct work_struct *work)
 	return;
 reset_err:
 	dev_err(&adapter->pdev->dev, "failed to allocate resources during reinit\n");
-	i40evf_close(adapter->netdev);
+	i40evf_close(netdev);
 }
 
 /**
Signature · 1 line
2.9.3
#1 lore raw

PATCH 2/12 i40e: use cpumask_copy instead of direct assignment

From: Jacob Keller <[email protected]>

According to the header file cpumask.h, we shouldn't be directly copying a cpumask_t, since its a bitmap and might not be copied correctly. Lets use the provided cpumask_copy() function instead.

---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +1 -1
index 998ad96..837d434 100644
@@ -3450,7 +3450,7 @@ static void i40e_irq_affinity_notify(struct irq_affinity_notify *notify,
 	struct i40e_q_vector *q_vector =
 		container_of(notify, struct i40e_q_vector, affinity_notify);
 
-	q_vector->affinity_mask = *mask;
+	cpumask_copy(&q_vector->affinity_mask, mask);
 }
 
 /**
drivers/net/ethernet/intel/i40evf/i40evf_main.c +1 -1
index ef55f71..755f60f 100644
@@ -520,7 +520,7 @@ static void i40evf_irq_affinity_notify(struct irq_affinity_notify *notify,
 	struct i40e_q_vector *q_vector =
 		container_of(notify, struct i40e_q_vector, affinity_notify);
 
-	q_vector->affinity_mask = *mask;
+	cpumask_copy(&q_vector->affinity_mask, mask);
 }
 
 /**
Signature · 1 line
2.9.3
#2 lore raw

PATCH 3/12 i40e: prevent changing ITR if adaptive-rx/tx enabled

In reply to Alice Michael

From: Alan Brady <[email protected]>

Currently the driver allows the user to change (or even disable) interrupt moderation if adaptive-rx/tx is enabled when this should not be the case.

Adaptive RX/TX will not respect the user's ITR settings so allowing the user to change it is weird. This bug would also allow the user to disable interrupt moderation with adaptive-rx/tx enabled which doesn't make much sense either.

This patch makes it such that if adaptive-rx/tx is enabled, the user cannot make any manual adjustments to interrupt moderation. It also makes it so that if ITR is disabled but adaptive-rx/tx is then enabled, ITR will be re-enabled.

---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 61 +++++++++++++++++---------
 1 file changed, 41 insertions(+), 20 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_ethtool.c +41 -20
index a868c8d..b273c24 100644
@@ -2194,14 +2194,29 @@ static int __i40e_set_coalesce(struct net_device *netdev,
 			       int queue)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	u16 intrl_reg, cur_rx_itr, cur_tx_itr;
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	u16 intrl_reg;
 	int i;
 
 	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
 		vsi->work_limit = ec->tx_max_coalesced_frames_irq;
 
+	if (queue < 0) {
+		cur_rx_itr = vsi->rx_rings[0]->rx_itr_setting;
+		cur_tx_itr = vsi->tx_rings[0]->tx_itr_setting;
+	} else if (queue < vsi->num_queue_pairs) {
+		cur_rx_itr = vsi->rx_rings[queue]->rx_itr_setting;
+		cur_tx_itr = vsi->tx_rings[queue]->tx_itr_setting;
+	} else {
+		netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
+			   vsi->num_queue_pairs - 1);
+		return -EINVAL;
+	}
+
+	cur_tx_itr &= ~I40E_ITR_DYNAMIC;
+	cur_rx_itr &= ~I40E_ITR_DYNAMIC;
+
 	/* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
 	if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
 		netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
@@ -2214,15 +2229,34 @@ static int __i40e_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 	}
 
-	if (ec->rx_coalesce_usecs == 0) {
-		if (ec->use_adaptive_rx_coalesce)
-			netif_info(pf, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
-	} else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
-		   (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+	if (ec->rx_coalesce_usecs != cur_rx_itr &&
+	    ec->use_adaptive_rx_coalesce) {
+		netif_info(pf, drv, netdev, "RX interrupt moderation cannot be changed if adaptive-rx is enabled.\n");
+		return -EINVAL;
+	}
+
+	if (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1)) {
 			netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
 			return -EINVAL;
 	}
 
+	if (ec->tx_coalesce_usecs != cur_tx_itr &&
+	    ec->use_adaptive_tx_coalesce) {
+		netif_info(pf, drv, netdev, "TX interrupt moderation cannot be changed if adaptive-tx is enabled.\n");
+		return -EINVAL;
+	}
+
+	if (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1)) {
+		netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
+		return -EINVAL;
+	}
+
+	if (ec->use_adaptive_rx_coalesce && !cur_rx_itr)
+		ec->rx_coalesce_usecs = I40E_MIN_ITR << 1;
+
+	if (ec->use_adaptive_tx_coalesce && !cur_tx_itr)
+		ec->tx_coalesce_usecs = I40E_MIN_ITR << 1;
+
 	intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high);
 	vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg);
 	if (vsi->int_rate_limit != ec->rx_coalesce_usecs_high) {
@@ -2230,27 +2264,14 @@ static int __i40e_set_coalesce(struct net_device *netdev,
 			   vsi->int_rate_limit);
 	}
 
-	if (ec->tx_coalesce_usecs == 0) {
-		if (ec->use_adaptive_tx_coalesce)
-			netif_info(pf, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
-	} else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
-		   (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
-			netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
-			return -EINVAL;
-	}
-
 	/* rx and tx usecs has per queue value. If user doesn't specify the queue,
 	 * apply to all queues.
 	 */
 	if (queue < 0) {
 		for (i = 0; i < vsi->num_queue_pairs; i++)
 			i40e_set_itr_per_queue(vsi, ec, i);
-	} else if (queue < vsi->num_queue_pairs) {
-		i40e_set_itr_per_queue(vsi, ec, queue);
 	} else {
-		netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
-			   vsi->num_queue_pairs - 1);
-		return -EINVAL;
+		i40e_set_itr_per_queue(vsi, ec, queue);
 	}
 
 	return 0;
Signature · 1 line
2.9.3
#3 lore raw

PATCH 4/12 i40e: synchronize nvmupdate command and adminq subtask

In reply to Alice Michael

From: Sudheer Mogilappagari <[email protected]>

During NVM update, state machine gets into unrecoverable state because i40e_clean_adminq_subtask can get scheduled after the admin queue command but before other state variables are updated. This causes incorrect input to i40e_nvmupd_check_wait_event and state transitions don't happen.

This issue existed before but surfaced after commit 373149fc99a0 ("i40e: Decrease the scope of rtnl lock")

This fix adds locking around admin queue command and update of state variables so that adminq_subtask will have accurate information whenever it gets scheduled.

---
 drivers/net/ethernet/intel/i40e/i40e_nvm.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_nvm.c +6 -0
index 17607a2..04f2192 100644
@@ -753,6 +753,11 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
 		hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
 	}
 
+	/* Acquire lock to prevent race condition where adminq_task
+	 * can execute after i40e_nvmupd_nvm_read/write but before state
+	 * variables (nvm_wait_opcode, nvm_release_on_done) are updated
+	 */
+	mutex_lock(&hw->aq.arq_mutex);
 	switch (hw->nvmupd_state) {
 	case I40E_NVMUPD_STATE_INIT:
 		status = i40e_nvmupd_state_init(hw, cmd, bytes, perrno);
@@ -788,6 +793,7 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
 		*perrno = -ESRCH;
 		break;
 	}
+	mutex_unlock(&hw->aq.arq_mutex);
 	return status;
 }
 
Signature · 1 line
2.9.3
#4 lore raw

PATCH 4/12 i40e: synchronize nvmupdate command and adminq subtask

Quoted 10 lines · Alice Michael

From: Sudheer Mogilappagari <[email protected]>

During NVM update, state machine gets into unrecoverable state because i40e_clean_adminq_subtask can get scheduled after the admin queue command but before other state variables are updated. This causes incorrect input to i40e_nvmupd_check_wait_event and state transitions don't happen.

This issue existed before but surfaced after commit 373149fc99a0 ("i40e: Decrease the scope of rtnl lock")

I had a feeling that patch might bite you. I suspect there may still be some other occasional timing issues cropping up.

Quoted 15 lines

This fix adds locking around admin queue command and update of state variables so that adminq_subtask will have accurate information whenever it gets scheduled.

---
  drivers/net/ethernet/intel/i40e/i40e_nvm.c | 6 ++++++
  1 file changed, 6 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_nvm.c +0 -0
index 17607a2..04f2192 100644

drivers/net/ethernet/intel/i40e/i40e_nvm.c i40e_status i40e_nvmupd_command(struct i40e_hw *hw, · line 760

Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_nvm.c +5 -0
@@ -753,6 +753,11 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
  		hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
  	}
 
+	/* Acquire lock to prevent race condition where adminq_task
+	 * can execute after i40e_nvmupd_nvm_read/write but before state
+	 * variables (nvm_wait_opcode, nvm_release_on_done) are updated
+	 */
+	mutex_lock(&hw->aq.arq_mutex);

Have you done any testing to see how long you might end up holding this lock? I suppose it is limited by the max length of the synchronous AQ polling timeout. You might mention that maximum time limitation here or in the commit notes, since this is a mutex over a possibly long I/O operation.

drivers/net/ethernet/intel/i40e/i40e_nvm.c i40e_status i40e_nvmupd_command(struct i40e_hw *hw,

Quoted 4 lines
drivers/net/ethernet/intel/i40e/i40e_nvm.c +0 -0
  	switch (hw->nvmupd_state) {
  	case I40E_NVMUPD_STATE_INIT:
  		status = i40e_nvmupd_state_init(hw, cmd, bytes, perrno);
@@ -788,6 +793,7 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,

There's a return statement in the *_WAIT cases that should have a mutex_unlock(), or should have a goto to the unlock at the end of the function, or you'll end up never again receiving AR events.

sln

Quoted 8 lines
drivers/net/ethernet/intel/i40e/i40e_nvm.c +1 -0
  		*perrno = -ESRCH;
  		break;
  	}
+	mutex_unlock(&hw->aq.arq_mutex);
  	return status;
  }
 
#5 lore raw

PATCH 5/12 i40e: Store the requested FEC information

In reply to Alice Michael

From: Mariusz Stachura <[email protected]>

Store information about FEC modes, that were requested. It will be used in printing link status information function and this way there is no need to call admin queue there.

---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 4 ++++
 drivers/net/ethernet/intel/i40e/i40e_type.h   | 1 +
 drivers/net/ethernet/intel/i40evf/i40e_type.h | 1 +
 3 files changed, 6 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_common.c +4 -0
index 8e082a9..5c36a18 100644
@@ -2529,6 +2529,10 @@ i40e_status i40e_update_link_info(struct i40e_hw *hw)
 		if (status)
 			return status;
 
+		hw->phy.link_info.req_fec_info =
+			abilities.fec_cfg_curr_mod_ext_info &
+			(I40E_AQ_REQUEST_FEC_KR | I40E_AQ_REQUEST_FEC_RS);
+
 		memcpy(hw->phy.link_info.module_type, &abilities.module_type,
 		       sizeof(hw->phy.link_info.module_type));
 	}
drivers/net/ethernet/intel/i40e/i40e_type.h +1 -0
index 3a18ed1..fd4bbdd 100644
@@ -185,6 +185,7 @@ struct i40e_link_status {
 	enum i40e_aq_link_speed link_speed;
 	u8 link_info;
 	u8 an_info;
+	u8 req_fec_info;
 	u8 fec_info;
 	u8 ext_info;
 	u8 loopback;
drivers/net/ethernet/intel/i40evf/i40e_type.h +1 -0
index bde7f24..2ea919d 100644
@@ -159,6 +159,7 @@ struct i40e_link_status {
 	enum i40e_aq_link_speed link_speed;
 	u8 link_info;
 	u8 an_info;
+	u8 req_fec_info;
 	u8 fec_info;
 	u8 ext_info;
 	u8 loopback;
Signature · 1 line
2.9.3
#6 lore raw

PATCH 7/12 i40e: Use correct flag to enable egress traffic for unicast promisc

In reply to Alice Michael

From: Akeem G Abodunrin <[email protected]>

Albeit, we usually set true promiscuous mode for both multicast and unicast at the same time - however, it is possible to set it individually, so using allmulti flag which is only for allmulticast might caused unwanted behavior in mirroring egress traffic promiscuous for unicast in VF.

---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +1 -1
index 3ef67dc..aa8d30b 100644
@@ -1758,7 +1758,7 @@ static int i40e_vc_config_promiscuous_mode_msg(struct i40e_vf *vf,
 		}
 	} else {
 		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(hw, vsi->seid,
-							     allmulti, NULL,
+							     alluni, NULL,
 							     true);
 		aq_err = pf->hw.aq.asq_last_status;
 		if (aq_ret) {
Signature · 1 line
2.9.3
#7 lore raw

PATCH 8/12 i40evf: fix possible snprintf truncation of q_vector->name

In reply to Alice Michael

From: Jacob Keller <[email protected]>

The q_vector names are based on the interface name with a driver prefix, the type of q_vector setup, and the queue number. We previously set the size of this variable to IFNAMSIZ + 9, which is incorrect, because we actually include a minimum of 14 characters extra beyond the interface name size.

New versions of GCC since 7 include a new warning that detects this possible truncation and complains. We can fix this by increasing the size incase our interface name is too large to avoid truncation. We don't need to go beyond 14 because the compiler is smart enough to realize our values can never exceed size of 1. We do go up to 15 here because possible future changes may increase the number of queues beyond one digit.

While we are here, also change some variables to be unsigned (since they are never negative) and stop using an extra unnecessary %s format specifier.

---
 drivers/net/ethernet/intel/i40evf/i40evf.h      |  2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 21 +++++++++------------
 2 files changed, 10 insertions(+), 13 deletions(-)
drivers/net/ethernet/intel/i40evf/i40evf.h +1 -1
index c89767e..f028c09 100644
@@ -121,7 +121,7 @@ struct i40e_q_vector {
 #define ITR_COUNTDOWN_START 100
 	u8 itr_countdown;	/* when 0 or 1 update ITR */
 	int v_idx;	/* vector index in list */
-	char name[IFNAMSIZ + 9];
+	char name[IFNAMSIZ + 15];
 	bool arm_wb_state;
 	cpumask_t affinity_mask;
 	struct irq_affinity_notify affinity_notify;
drivers/net/ethernet/intel/i40evf/i40evf_main.c +9 -12
index 755f60f..a8bc1ed 100644
@@ -543,9 +543,9 @@ static void i40evf_irq_affinity_release(struct kref *ref) {}
 static int
 i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 {
-	int vector, err, q_vectors;
-	int rx_int_idx = 0, tx_int_idx = 0;
-	int irq_num;
+	unsigned int vector, q_vectors;
+	unsigned int rx_int_idx = 0, tx_int_idx = 0;
+	int irq_num, err;
 
 	i40evf_irq_disable(adapter);
 	/* Decrement for Other and TCP Timer vectors */
@@ -556,18 +556,15 @@ i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 		irq_num = adapter->msix_entries[vector + NONQ_VECS].vector;
 
 		if (q_vector->tx.ring && q_vector->rx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "TxRx", rx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-TxRx-%d", basename, rx_int_idx++);
 			tx_int_idx++;
 		} else if (q_vector->rx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "rx", rx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-rx-%d", basename, rx_int_idx++);
 		} else if (q_vector->tx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "tx", tx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-tx-%d", basename, tx_int_idx++);
 		} else {
 			/* skip this unused q_vector */
 			continue;
Signature · 1 line
2.9.3
#8 lore raw

PATCH 9/12 i40e: force VMDQ device name truncation

In reply to Alice Michael

From: Jacob Keller <[email protected]>

In new versions of GCC since 7.x a new warning exists which warns when a string is truncated before all of the format can be completed.

When we setup VMDQ netdev names we are copying a pre-existing interface name which could be up to 15 characters in length. Since we also add 4 bytes, v, the literal %, the d and a \0 null, we would overrun the available size unless snprintf truncated for us.

The snprintf call will ofcourse truncate on the end, so lets instead modify the code to force truncation of the copied netdev name by 4 characters, to create enough space for the 4 bytes we're adding.

---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +7 -2
index 837d434..0c8c07d 100644
@@ -9690,8 +9690,13 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 		i40e_add_mac_filter(vsi, mac_addr);
 		spin_unlock_bh(&vsi->mac_filter_hash_lock);
 	} else {
-		/* relate the VSI_VMDQ name to the VSI_MAIN name */
-		snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
+		/* Relate the VSI_VMDQ name to the VSI_MAIN name. Note that we
+		 * are still limited by IFNAMSIZ, but we're adding 'v%d\0' to
+		 * the end, which is 4 bytes long, so force truncation of the
+		 * original name by IFNAMSIZ - 4
+		 */
+		snprintf(netdev->name, IFNAMSIZ, "%.*sv%%d",
+			 IFNAMSIZ - 4,
 			 pf->vsi[pf->lan_vsi]->netdev->name);
 		random_ether_addr(mac_addr);
 
Signature · 1 line
2.9.3
#9 lore raw

PATCH 10/12 i40e/i40evf: support for VF VLAN tag stripping control

In reply to Alice Michael

From: Mariusz Stachura <[email protected]>

This patch gives VF capability to control VLAN tag stripping via ethtool. As rx-vlan-offload was fixed before, now the VF is able to change it using "ethtool --offload <IF> rxvlan on/off" settings.

---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 60 ++++++++++++++++++++++
 drivers/net/ethernet/intel/i40evf/i40evf.h         |  4 ++
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    | 33 ++++++++++++
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    | 40 +++++++++++++++
 4 files changed, 137 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +60 -0
index aa8d30b..d551f84 100644
@@ -2530,6 +2530,60 @@ static int i40e_vc_set_rss_hena(struct i40e_vf *vf, u8 *msg, u16 msglen)
 }
 
 /**
+ * i40e_vc_enable_vlan_stripping
+ * @vf: pointer to the VF info
+ * @msg: pointer to the msg buffer
+ * @msglen: msg length
+ *
+ * Enable vlan header stripping for the VF
+ **/
+static int i40e_vc_enable_vlan_stripping(struct i40e_vf *vf, u8 *msg,
+					 u16 msglen)
+{
+	struct i40e_vsi *vsi = vf->pf->vsi[vf->lan_vsi_idx];
+	i40e_status aq_ret = 0;
+
+	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+		aq_ret = I40E_ERR_PARAM;
+		goto err;
+	}
+
+	i40e_vlan_stripping_enable(vsi);
+
+	/* send the response to the VF */
+err:
+	return i40e_vc_send_resp_to_vf(vf, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING,
+				       aq_ret);
+}
+
+/**
+ * i40e_vc_disable_vlan_stripping
+ * @vf: pointer to the VF info
+ * @msg: pointer to the msg buffer
+ * @msglen: msg length
+ *
+ * Disable vlan header stripping for the VF
+ **/
+static int i40e_vc_disable_vlan_stripping(struct i40e_vf *vf, u8 *msg,
+					  u16 msglen)
+{
+	struct i40e_vsi *vsi = vf->pf->vsi[vf->lan_vsi_idx];
+	i40e_status aq_ret = 0;
+
+	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+		aq_ret = I40E_ERR_PARAM;
+		goto err;
+	}
+
+	i40e_vlan_stripping_disable(vsi);
+
+	/* send the response to the VF */
+err:
+	return i40e_vc_send_resp_to_vf(vf, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING,
+				       aq_ret);
+}
+
+/**
  * i40e_vc_process_vf_msg
  * @pf: pointer to the PF structure
  * @vf_id: source VF id
@@ -2648,6 +2702,12 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, s16 vf_id, u32 v_opcode,
 	case VIRTCHNL_OP_SET_RSS_HENA:
 		ret = i40e_vc_set_rss_hena(vf, msg, msglen);
 		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
+		ret = i40e_vc_enable_vlan_stripping(vf, msg, msglen);
+		break;
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
+		ret = i40e_vc_disable_vlan_stripping(vf, msg, msglen);
+		break;
 
 	case VIRTCHNL_OP_UNKNOWN:
 	default:
drivers/net/ethernet/intel/i40evf/i40evf.h +4 -0
index f028c09..b659358 100644
@@ -261,6 +261,8 @@ struct i40evf_adapter {
 #define I40EVF_FLAG_AQ_RELEASE_PROMISC		BIT(16)
 #define I40EVF_FLAG_AQ_REQUEST_ALLMULTI		BIT(17)
 #define I40EVF_FLAG_AQ_RELEASE_ALLMULTI		BIT(18)
+#define I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING	BIT(19)
+#define I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING   BIT(20)
 
 	/* OS defined structs */
 	struct net_device *netdev;
@@ -358,6 +360,8 @@ void i40evf_get_hena(struct i40evf_adapter *adapter);
 void i40evf_set_hena(struct i40evf_adapter *adapter);
 void i40evf_set_rss_key(struct i40evf_adapter *adapter);
 void i40evf_set_rss_lut(struct i40evf_adapter *adapter);
+void i40evf_enable_vlan_stripping(struct i40evf_adapter *adapter);
+void i40evf_disable_vlan_stripping(struct i40evf_adapter *adapter);
 void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 				enum virtchnl_ops v_opcode,
 				i40e_status v_retval, u8 *msg, u16 msglen);
drivers/net/ethernet/intel/i40evf/i40evf_main.c +33 -0
index a8bc1ed..ad4c833 100644
@@ -1676,6 +1676,16 @@ static void i40evf_watchdog_task(struct work_struct *work)
 		goto watchdog_done;
 	}
 
+	if (adapter->aq_required & I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING) {
+		i40evf_enable_vlan_stripping(adapter);
+		goto watchdog_done;
+	}
+
+	if (adapter->aq_required & I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING) {
+		i40evf_disable_vlan_stripping(adapter);
+		goto watchdog_done;
+	}
+
 	if (adapter->aq_required & I40EVF_FLAG_AQ_CONFIGURE_QUEUES) {
 		i40evf_configure_queues(adapter);
 		goto watchdog_done;
@@ -2295,6 +2305,28 @@ static int i40evf_change_mtu(struct net_device *netdev, int new_mtu)
 }
 
 /**
+ * i40e_set_features - set the netdev feature flags
+ * @netdev: ptr to the netdev being adjusted
+ * @features: the feature set that the stack is suggesting
+ * Note: expects to be called while under rtnl_lock()
+ **/
+static int i40evf_set_features(struct net_device *netdev,
+			       netdev_features_t features)
+{
+	struct i40evf_adapter *adapter = netdev_priv(netdev);
+
+	if (!VLAN_ALLOWED(adapter))
+		return -EINVAL;
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		adapter->aq_required |= I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING;
+	else
+		adapter->aq_required |= I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING;
+
+	return 0;
+}
+
+/**
  * i40evf_features_check - Validate encapsulated packet conforms to limits
  * @skb: skb buff
  * @netdev: This physical port's netdev
@@ -2387,6 +2419,7 @@ static const struct net_device_ops i40evf_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= i40evf_vlan_rx_kill_vid,
 	.ndo_features_check	= i40evf_features_check,
 	.ndo_fix_features	= i40evf_fix_features,
+	.ndo_set_features	= i40evf_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= i40evf_netpoll,
 #endif
drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c +40 -0
index 6c403bf..85876f4 100644
@@ -821,6 +821,46 @@ void i40evf_set_rss_lut(struct i40evf_adapter *adapter)
 }
 
 /**
+ * i40evf_enable_vlan_stripping
+ * @adapter: adapter structure
+ *
+ * Request VLAN header stripping to be enabled
+ **/
+void i40evf_enable_vlan_stripping(struct i40evf_adapter *adapter)
+{
+	if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
+		/* bail because we already have a command pending */
+		dev_err(&adapter->pdev->dev, "Cannot enable stripping, command %d pending\n",
+			adapter->current_op);
+		return;
+	}
+	adapter->current_op = VIRTCHNL_OP_ENABLE_VLAN_STRIPPING;
+	adapter->aq_required &= ~I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING;
+	i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING,
+			   NULL, 0);
+}
+
+/**
+ * i40evf_disable_vlan_stripping
+ * @adapter: adapter structure
+ *
+ * Request VLAN header stripping to be disabled
+ **/
+void i40evf_disable_vlan_stripping(struct i40evf_adapter *adapter)
+{
+	if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
+		/* bail because we already have a command pending */
+		dev_err(&adapter->pdev->dev, "Cannot disable stripping, command %d pending\n",
+			adapter->current_op);
+		return;
+	}
+	adapter->current_op = VIRTCHNL_OP_DISABLE_VLAN_STRIPPING;
+	adapter->aq_required &= ~I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING;
+	i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING,
+			   NULL, 0);
+}
+
+/**
  * i40evf_print_link_message - print link up or down
  * @adapter: adapter structure
  *
Signature · 1 line
2.9.3
#10 lore raw

PATCH 11/12 i40e: 25G FEC status improvements

In reply to Alice Michael

From: Mariusz Stachura <[email protected]>

This patch improves the system log message. The log message will be expanded to include the FEC mode the FW requested before link was established.

---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +16 -2
index 0c8c07d..fa93c63 100644
@@ -5355,6 +5355,7 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 	char *speed = "Unknown";
 	char *fc = "Unknown";
 	char *fec = "";
+	char *req_fec = "";
 	char *an = "";
 
 	new_speed = vsi->back->hw.phy.link_info.link_speed;
@@ -5416,6 +5417,7 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 	}
 
 	if (vsi->back->hw.phy.link_info.link_speed == I40E_LINK_SPEED_25GB) {
+		req_fec = ", Requested FEC: None";
 		fec = ", FEC: None";
 		an = ", Autoneg: False";
 
@@ -5428,10 +5430,22 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 		else if (vsi->back->hw.phy.link_info.fec_info &
 			 I40E_AQ_CONFIG_FEC_RS_ENA)
 			fec = ", FEC: CL108 RS-FEC";
+
+		/* 'CL108 RS-FEC' should be displayed when RS is requested, or
+		 * both RS and FC are requested
+		 */
+		if (vsi->back->hw.phy.link_info.req_fec_info &
+		    (I40E_AQ_REQUEST_FEC_KR | I40E_AQ_REQUEST_FEC_RS)) {
+			if (vsi->back->hw.phy.link_info.req_fec_info &
+			    I40E_AQ_REQUEST_FEC_RS)
+				req_fec = ", Requested FEC: CL108 RS-FEC";
+			else
+				req_fec = ", Requested FEC: CL74 FC-FEC/BASE-R";
+		}
 	}
 
-	netdev_info(vsi->netdev, "NIC Link is Up, %sbps Full Duplex%s%s, Flow Control: %s\n",
-		    speed, fec, an, fc);
+	netdev_info(vsi->netdev, "NIC Link is Up, %sbps Full Duplex%s%s%s, Flow Control: %s\n",
+		    speed, req_fec, fec, an, fc);
 }
 
 /**
Signature · 1 line
2.9.3