Skip to contentSkip to conversation

Ethernet not functional on i.MX6DL Sabre Auto

U-Boot Miquel RAYNAL 3 participants 6 messages Jul 12, 2017 – Jul 13, 2017

lore
Share & tools
lore

Miquel RAYNAL

author
#0 lore raw

Hi,

I am using a Sabre Auto board with an i.MX6 Dual Lite.

When I compile U-boot with defconfig file mx6dlsabreauto_defconfig, the network is not functionnal. Only the orange LED on the RJ45 port is blinking and dhcp requests never end. In menuconfig I saw numerous unselected options that I guess should be enabled. But event with that, I could not get through:

CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MXC=y

The issue is present in v2017.05 and v2017.07 (did not tried previous versions). Any idea of what could possibly be wrong ?

Boot log follows.

Thank you,
Miquèl

U-Boot 2017.07-dirty (Jul 12 2017 - 16:12:17 +0200)

CPU:   Freescale i.MX6DL rev1.1 at 792MHz
CPU:   Automotive temperature grade (-40C to 125C) at 44C
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C:   ready
DRAM:  2 GiB
PMIC:  PFUZE100 ID=0x10
Flash: 32 MiB
NAND:  256 MiB
MMC:   FSL_SDHC: 0

*** Warning - bad CRC, using default environment

No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again

Signature · 3 lines
Miquel Raynal, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
#1 lore raw

Hi Miquel,

Quoted 10 lines · Miquel RAYNAL

Hi,

I am using a Sabre Auto board with an i.MX6 Dual Lite.

When I compile U-boot with defconfig file mx6dlsabreauto_defconfig, the network is not functionnal. Only the orange LED on the RJ45 port is blinking and dhcp requests never end. In menuconfig I saw numerous unselected options that I guess should be enabled. But event with that, I could not get through:

Quoted 7 lines

CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MXC=y

The issue is present in v2017.05 and v2017.07 (did not tried previous versions). Any idea of what could possibly be wrong ?

I don't have my mx6sabreauto handy to investigate this problem.

Does the change below make Ethernet to work again?
https://pastebin.com/VnEdBCa6

#2 lore raw
Quoted 4 lines · Fabio Estevam

I don't have my mx6sabreauto handy to investigate this problem.

Does the change below make Ethernet to work again?
https://pastebin.com/VnEdBCa6

And here is a patch against u-boot-imx tree (
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary)

No need to change anything in defconfig. Only do:

make mx6sabreauto_defconfig
make

and Ethernet should work with the patch applied.

Please let me know how your test goes.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-sabreautonet.patch
Type: text/x-patch
Size: 2216 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170712/68bacb1a/attachment.bin>

author
#3 lore raw

Hi Fabio,

Quoted 11 lines · On Wed, 12 Jul 2017 17:17:28 -0300 Fabio Estevam <[email protected]> wrote:
Quoted 4 lines · Fabio Estevam

I don't have my mx6sabreauto handy to investigate this problem.

Does the change below make Ethernet to work again?
https://pastebin.com/VnEdBCa6

And here is a patch against u-boot-imx tree (
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary)

Quoted 8 lines

No need to change anything in defconfig. Only do:

make mx6sabreauto_defconfig
make

and Ethernet should work with the patch applied.

Please let me know how your test goes.

Thank you for the very quick answer, I was not able to test the patch yesterday but now I can confirm it works and Ethernet is functional again on mx6sabreauto design.

The patch you sent does only apply on imx tree though (the path contains mx6sabreauto instead of mx6qsabreauto).

Best regards,
Miquèl

Signature · 3 lines
Miquel Raynal, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
#4 lore raw

Hi Miquel,

Quoted 3 lines · Miquel RAYNAL

Thank you for the very quick answer, I was not able to test the patch yesterday but now I can confirm it works and Ethernet is functional again on mx6sabreauto design.

Thanks for testing!

Quoted 2 lines

The patch you sent does only apply on imx tree though (the path contains mx6sabreauto instead of mx6qsabreauto).

On the latest u-boot-imx tree the mx6sabreauto have been converted to SPL, so the same SPL + u-boot.img can boot mx6q/mx6dl/mx6qp sabreauto boards.

That's the reason we have renamed it from mx6qsabreauto to the more generic mx6sabreauto naming.

#5 lore raw
Quoted 14 lines · Fabio Estevam

Hi Miquel,

Quoted 3 lines · Miquel RAYNAL

Thank you for the very quick answer, I was not able to test the patch yesterday but now I can confirm it works and Ethernet is functional again on mx6sabreauto design.

Thanks for testing!

Quoted 2 lines

The patch you sent does only apply on imx tree though (the path contains mx6sabreauto instead of mx6qsabreauto).

Quoted 6 lines

On the latest u-boot-imx tree the mx6sabreauto have been converted to SPL, so the same SPL + u-boot.img can boot mx6q/mx6dl/mx6qp sabreauto boards.

That's the reason we have renamed it from mx6qsabreauto to the more generic mx6sabreauto naming.

Right - thanks for fix and testing. I have already merged it into u-boot-imx, thanks !

Best regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================