Skylake / (EE) modeset(0): present flip failed loop
Ok, there must be a problem, sent 5 messages to the list with clear details on how the intel driver is failing for me, got one answer from Chris which sadly was a bit too short to give me a good hint of what I should try next or what further debugging I should give to help fix/improve the driver, and then nothing.
I'm not sure if the messages are being dropped or what's going on, so I've added a bunch of intel folks who have posted to the list. I realize it's a bit rude, and I apologize for this, but since I've gotten no acknowledgement that my multiple messages are even being seen, that's my only recourse left.
Again, I was sent to this list to report issues with the xorg intel driver. If this is not the correct place to report issues, please tell me where I should do so.
As for the issue, from Chris' answer I think he said I shouldn't be using the KMS intel driver, except it seems to be the only option in debian. I'm not super sure what he meant or what I'm supposed to do next. Details below:
Thanks for your help, the current driver setup is working badly and is filling my disk with log spam which gets reset when it finally crashes every few days:
saruman:/tmp$ du -sh /var/log/Xorg.0.log 1.1G /var/log/Xorg.0.log
Quoted 54 lines · Marc MERLIN
I'll try a more basic question: am I supposed not to use the modesetting driver if I want a working setup?
While debian seems to default to or kind of force the use of the modesetting driver, if you confirm I shouldn't be using it, I can look at how to switch away from it.Quoted 48 lines
Quoted 15 lines
Quoted 15 lines · Marc MERLIN
Quoted 14 lines
Howdy,
I have a thinkpad P70 with debian testing and 4.11.6 kernel. A recent-ish upgrade broke something and now I'm getting loads of spam in my Xorg.log
[ 5031.435] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.435] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.435] (EE) modeset(0): present flip failed [ 5031.519] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.519] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.519] (EE) modeset(0): present flip failed(...)
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
system info:
ii libdrm-intel1:amd64 2.4.74-1 ii xserver-xorg-core 2:1.19.2-1 ii xserver-xorg-video-intel 2:2.99.917+git20161206-1If you were indeed using -intel then I would be more concerned.
Thanks for the reply.
Sorry, I'm not quite parsing what you wrote here. Are you saying that I should be disable the modesetting driver?
To be honest, I didn't actually choose it, it seems that Debian forced the switch to it.xserver-xorg-video-intel (2:2.13.0-2) unstable; urgency=low
* Starting from 2.10, the Intel X driver depends on a kernel driver for mode setting (that's called KMS). The corresponding kernel option is
CONFIG_DRM_I915, and is enabled in Debian kernels.
* To enable KMS, either of those should be sufficient:
+/etc/modprobe.d/i915-kms.confshould contain:
options i915 modeset=1If so, how do you recommend I switch back if that's what you meant I should do?
Quoted 4 lines
But at the very least you need to dig into dmesg (with drm.debug=fe) to find out why it failed. (One way is to run -intel with debugging enabled so that it includes the kernel error messages along with the failure message.)
Sounds like I need to switch drivers?
Right now I have no xorg.conf and it just autodetects/sets the KMS driver. Sorry if I'm kind of a NOOB here, but if you give me a short pointer to how you'd like me to switch, I'll happily do so.
Original message:
Quoted 98 lines
Howdy,
I have a thinkpad P70 with debian testing and 4.11.6 kernel. A recent-ish upgrade broke something and now I'm getting loads of spam in my Xorg.log
[ 5031.435] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.435] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.435] (EE) modeset(0): present flip failed [ 5031.519] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.519] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.519] (EE) modeset(0): present flip failed(...)
system info:
ii libdrm-intel1:amd64 2.4.74-1 ii xserver-xorg-core 2:1.19.2-1 ii xserver-xorg-video-intel 2:2.99.917+git20161206-14.11.6-amd64-preempt
saruman:~$ xrandr --listproviders Providers: number : 2 Provider 0: id: 0x7a cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 1 associated providers: 0 name:modesetting Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 3 associated providers: 0 name:modesetting[ 73.575] (II) xfree86: Adding drm device (/dev/dri/card1) [ 73.576] (II) xfree86: Adding drm device (/dev/dri/card0) [ 73.588] (--) PCI:*(0:0:2:0) 8086:191b:17aa:222d rev 6, Mem @ 0xd2000000/16777216, 0x60000000/536870912, I/O @ 0x00006000/64, BIOS @ 0x????????/131072 [ 73.588] (--) PCI: (0:1:0:0) 10de:13b2:17aa:222d rev 162, Mem @ 0xd3000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288 [ 73.597] (II) LoadModule: "modesetting" [ 73.597] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 73.598] (II) Module modesetting: vendor="X.Org Foundation" [ 73.598] compiled for 1.19.2, module version = 1.19.2 [ 73.598] Module class: X.Org Video Driver [ 73.598] ABI class: X.Org Video Driver, version 23.0 [ 73.598] (II) LoadModule: "fbdev" [ 73.598] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 73.598] (II) Module fbdev: vendor="X.Org Foundation" [ 73.598] compiled for 1.19.0, module version = 0.4.4 [ 73.598] Module class: X.Org Video Driver [ 73.598] ABI class: X.Org Video Driver, version 23.0 [ 73.598] (II) LoadModule: "vesa" [ 73.598] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 73.599] (II) Module vesa: vendor="X.Org Foundation" [ 73.599] compiled for 1.19.0, module version = 2.3.4 [ 73.599] Module class: X.Org Video Driver [ 73.599] ABI class: X.Org Video Driver, version 23.0 [ 73.599] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 73.599] (II) FBDEV: driver for framebuffer: fbdev [ 73.599] (II) VESA: driver for VESA chipsets: vesa [ 73.637] (II) modeset(0): using drv /dev/dri/card0 [ 73.637] (II) modeset(G0): using drv /dev/dri/card1In case it helps:
saruman:~# grep . /sys/module/i915/parameters/* /sys/module/i915/parameters/alpha_support:0 /sys/module/i915/parameters/disable_display:N /sys/module/i915/parameters/disable_power_well:1 /sys/module/i915/parameters/edp_vswing:0 /sys/module/i915/parameters/enable_cmd_parser:Y /sys/module/i915/parameters/enable_dc:-1 /sys/module/i915/parameters/enable_dpcd_backlight:N /sys/module/i915/parameters/enable_dp_mst:Y /sys/module/i915/parameters/enable_execlists:1 /sys/module/i915/parameters/enable_fbc:1 /sys/module/i915/parameters/enable_guc_loading:0 /sys/module/i915/parameters/enable_guc_submission:0 /sys/module/i915/parameters/enable_gvt:N /sys/module/i915/parameters/enable_hangcheck:Y /sys/module/i915/parameters/enable_ips:1 /sys/module/i915/parameters/enable_ppgtt:3 /sys/module/i915/parameters/enable_psr:0 /sys/module/i915/parameters/enable_rc6:1 /sys/module/i915/parameters/error_capture:Y /sys/module/i915/parameters/fastboot:N /sys/module/i915/parameters/force_reset_modeset_test:N /sys/module/i915/parameters/guc_log_level:-1 /sys/module/i915/parameters/inject_load_failure:0 /sys/module/i915/parameters/invert_brightness:0 /sys/module/i915/parameters/load_detect_test:N /sys/module/i915/parameters/lvds_channel_mode:0 /sys/module/i915/parameters/lvds_use_ssc:-1 /sys/module/i915/parameters/mmio_debug:0 /sys/module/i915/parameters/modeset:1 /sys/module/i915/parameters/nuclear_pageflip:N /sys/module/i915/parameters/panel_ignore_lid:1 /sys/module/i915/parameters/prefault_disable:N /sys/module/i915/parameters/reset:Y /sys/module/i915/parameters/semaphores:0 /sys/module/i915/parameters/use_mmio_flip:0 /sys/module/i915/parameters/vbt_sdvo_panel_type:-1 /sys/module/i915/parameters/verbose_state_checks:YAny idea what to do?
Thanks,
Marc
Signature · 8 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfxMarc, please file a bug on freedesktop.org.
We expect the modesetting driver to work well and if it's not, it should have a bug associated with it.
Sorry for your frustration.
Quoted 177 lines · Marc MERLIN
Ok, there must be a problem, sent 5 messages to the list with clear details on how the intel driver is failing for me, got one answer from Chris which sadly was a bit too short to give me a good hint of what I should try next or what further debugging I should give to help fix/improve the driver, and then nothing.
I'm not sure if the messages are being dropped or what's going on, so I've added a bunch of intel folks who have posted to the list. I realize it's a bit rude, and I apologize for this, but since I've gotten no acknowledgement that my multiple messages are even being seen, that's my only recourse left.Again, I was sent to this list to report issues with the xorg intel driver. If this is not the correct place to report issues, please tell me where I should do so.
As for the issue, from Chris' answer I think he said I shouldn't be using the KMS intel driver, except it seems to be the only option in debian. I'm not super sure what he meant or what I'm supposed to do next. Details below:
Thanks for your help, the current driver setup is working badly and is filling my disk with log spam which gets reset when it finally crashes every few days:
saruman:/tmp$ du -sh /var/log/Xorg.0.log 1.1G /var/log/Xorg.0.logQuoted 54 lines · Marc MERLIN
I'll try a more basic question: am I supposed not to use the modesetting driver if I want a working setup?
While debian seems to default to or kind of force the use of the modesetting driver, if you confirm I shouldn't be using it, I can look at how to switch away from it.Quoted 48 lines
Quoted 15 lines
Quoted 15 lines · Marc MERLIN
Quoted 14 lines
Howdy,
I have a thinkpad P70 with debian testing and 4.11.6 kernel. A recent-ish upgrade broke something and now I'm getting loads of spam in my Xorg.log
[ 5031.435] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.435] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.435] (EE) modeset(0): present flip failed [ 5031.519] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.519] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.519] (EE) modeset(0): present flip failed(...)
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
system info:
ii libdrm-intel1:amd64 2.4.74-1 ii xserver-xorg-core 2:1.19.2-1 ii xserver-xorg-video-intel 2:2.99.917+git20161206-1If you were indeed using -intel then I would be more concerned.
Thanks for the reply.
Sorry, I'm not quite parsing what you wrote here. Are you saying that I should be disable the modesetting driver?
To be honest, I didn't actually choose it, it seems that Debian forced the switch to it.xserver-xorg-video-intel (2:2.13.0-2) unstable; urgency=low
* Starting from 2.10, the Intel X driver depends on a kernel driver for mode setting (that's called KMS). The corresponding kernel option is
CONFIG_DRM_I915, and is enabled in Debian kernels.
* To enable KMS, either of those should be sufficient:
+/etc/modprobe.d/i915-kms.confshould contain:
options i915 modeset=1If so, how do you recommend I switch back if that's what you meant I should do?
Quoted 4 lines
But at the very least you need to dig into dmesg (with drm.debug=fe) to find out why it failed. (One way is to run -intel with debugging enabled so that it includes the kernel error messages along with the failure message.)
Sounds like I need to switch drivers?
Right now I have no xorg.conf and it just autodetects/sets the KMS driver. Sorry if I'm kind of a NOOB here, but if you give me a short pointer to how you'd like me to switch, I'll happily do so.Original message:
Quoted 94 lines
Howdy,
I have a thinkpad P70 with debian testing and 4.11.6 kernel. A recent-ish upgrade broke something and now I'm getting loads of spam in my Xorg.log
[ 5031.435] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.435] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.435] (EE) modeset(0): present flip failed [ 5031.519] (WW) modeset(0): flip queue failed: Invalid argument [ 5031.519] (WW) modeset(0): Page flip failed: Invalid argument [ 5031.519] (EE) modeset(0): present flip failed(...)
system info:
ii libdrm-intel1:amd64 2.4.74-1 ii xserver-xorg-core 2:1.19.2-1 ii xserver-xorg-video-intel 2:2.99.917+git20161206-14.11.6-amd64-preempt
saruman:~$ xrandr --listproviders Providers: number : 2 Provider 0: id: 0x7a cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 1 associated providers: 0 name:modesetting Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 3 associated providers: 0 name:modesetting[ 73.575] (II) xfree86: Adding drm device (/dev/dri/card1) [ 73.576] (II) xfree86: Adding drm device (/dev/dri/card0) [ 73.588] (--) PCI:*(0:0:2:0) 8086:191b:17aa:222d rev 6, Mem @ 0xd2000000/16777216, 0x60000000/536870912, I/O @ 0x00006000/64, BIOS @ 0x????????/131072 [ 73.588] (--) PCI: (0:1:0:0) 10de:13b2:17aa:222d rev 162, Mem @ 0xd3000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288 [ 73.597] (II) LoadModule: "modesetting" [ 73.597] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 73.598] (II) Module modesetting: vendor="X.Org Foundation" [ 73.598] compiled for 1.19.2, module version = 1.19.2 [ 73.598] Module class: X.Org Video Driver [ 73.598] ABI class: X.Org Video Driver, version 23.0 [ 73.598] (II) LoadModule: "fbdev" [ 73.598] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 73.598] (II) Module fbdev: vendor="X.Org Foundation" [ 73.598] compiled for 1.19.0, module version = 0.4.4 [ 73.598] Module class: X.Org Video Driver [ 73.598] ABI class: X.Org Video Driver, version 23.0 [ 73.598] (II) LoadModule: "vesa" [ 73.598] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 73.599] (II) Module vesa: vendor="X.Org Foundation" [ 73.599] compiled for 1.19.0, module version = 2.3.4 [ 73.599] Module class: X.Org Video Driver [ 73.599] ABI class: X.Org Video Driver, version 23.0 [ 73.599] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 73.599] (II) FBDEV: driver for framebuffer: fbdev [ 73.599] (II) VESA: driver for VESA chipsets: vesa [ 73.637] (II) modeset(0): using drv /dev/dri/card0 [ 73.637] (II) modeset(G0): using drv /dev/dri/card1In case it helps:
saruman:~# grep . /sys/module/i915/parameters/* /sys/module/i915/parameters/alpha_support:0 /sys/module/i915/parameters/disable_display:N /sys/module/i915/parameters/disable_power_well:1 /sys/module/i915/parameters/edp_vswing:0 /sys/module/i915/parameters/enable_cmd_parser:Y /sys/module/i915/parameters/enable_dc:-1 /sys/module/i915/parameters/enable_dpcd_backlight:N /sys/module/i915/parameters/enable_dp_mst:Y /sys/module/i915/parameters/enable_execlists:1 /sys/module/i915/parameters/enable_fbc:1 /sys/module/i915/parameters/enable_guc_loading:0 /sys/module/i915/parameters/enable_guc_submission:0 /sys/module/i915/parameters/enable_gvt:N /sys/module/i915/parameters/enable_hangcheck:Y /sys/module/i915/parameters/enable_ips:1 /sys/module/i915/parameters/enable_ppgtt:3 /sys/module/i915/parameters/enable_psr:0 /sys/module/i915/parameters/enable_rc6:1 /sys/module/i915/parameters/error_capture:Y /sys/module/i915/parameters/fastboot:N /sys/module/i915/parameters/force_reset_modeset_test:N /sys/module/i915/parameters/guc_log_level:-1 /sys/module/i915/parameters/inject_load_failure:0 /sys/module/i915/parameters/invert_brightness:0 /sys/module/i915/parameters/load_detect_test:N /sys/module/i915/parameters/lvds_channel_mode:0 /sys/module/i915/parameters/lvds_use_ssc:-1 /sys/module/i915/parameters/mmio_debug:0 /sys/module/i915/parameters/modeset:1 /sys/module/i915/parameters/nuclear_pageflip:N /sys/module/i915/parameters/panel_ignore_lid:1 /sys/module/i915/parameters/prefault_disable:N /sys/module/i915/parameters/reset:Y /sys/module/i915/parameters/semaphores:0 /sys/module/i915/parameters/use_mmio_flip:0 /sys/module/i915/parameters/vbt_sdvo_panel_type:-1 /sys/module/i915/parameters/verbose_state_checks:Y
Quoted 15 lines
Quoted 4 lines
Any idea what to do?
Thanks,
MarcSignature · 8 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R. Microsoft is to operating systems .... .... what McDonalds is to gourmet cooking Home page: http://marc.merlins.org/ _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Ben Widawsky
Marc, please file a bug on freedesktop.org.
We expect the modesetting driver to work well and if it's not, it should have a bug associated with it.
Thanks, done:
https://bugs.freedesktop.org/show_bug.cgi?id=101825
Hopefully I found the right queue for it, if not feel free to re-assign.
Thanks,
Marc
Signature · 8 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx