Skip to contentSkip to conversation

tests/chamelium: Skip suspend/resume test with unreliable hotplug event

PATCH New Paul Kocialkowski 1 participant 1 message Jul 18, 2017

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 tests/chamelium: Skip suspend/resume test with unreliable hotplug event

It may occur that a hotplug uevent is detected at resume, even though it does not indicate that an actual hotplug happened. This is the case when link training fails on any other connector.

There is currently no way to distinguish what connector caused a hotplug uevent, nor what the reason for that uevent really is. This makes it impossible to find out whether the test actually passed or not.

To circumvent this problem, the link status of each connector is collected before and after suspend and compared to skip the test if the state was good before and turned to bad after resume.

This only concerns the EDID change test, where we cannot check the connector state (that is not supposed to have changed). For actual hotplug tests, the tests should be safe since they check each connector's state after receiving the uevent.

The situation described here happens with DP-VGA bridges that fail link training after resume, as they need some more time to response on their AUX channel.

---
 tests/chamelium.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
tests/chamelium.c +35 -0
index e26f0557..8af33aaa 100644
@@ -87,6 +87,31 @@ get_precalculated_crc(struct chamelium_port *port, int w, int h)
 }
 
 static void
+get_connectors_link_status_failed(data_t *data, bool *link_status_failed)
+{
+	drmModeConnector *connector;
+	uint64_t link_status;
+	drmModePropertyPtr prop;
+	int p;
+
+	for (p = 0; p < data->port_count; p++) {
+		connector = chamelium_port_get_connector(data->chamelium,
+							 data->ports[p], false);
+
+		igt_assert(kmstest_get_property(data->drm_fd,
+						connector->connector_id,
+						DRM_MODE_OBJECT_CONNECTOR,
+						"link-status", NULL,
+						&link_status, &prop));
+
+		link_status_failed[p] = link_status == DRM_MODE_LINK_STATUS_BAD;
+
+		drmModeFreeProperty(prop);
+		drmModeFreeConnector(connector);
+	}
+}
+
+static void
 require_connector_present(data_t *data, unsigned int type)
 {
 	int i;
@@ -310,6 +335,8 @@ test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
 				int alt_edid_id)
 {
 	struct udev_monitor *mon = igt_watch_hotplug();
+	bool link_status_failed[2][data->port_count];
+	int p;
 
 	reset_state(data, port);
 
@@ -326,8 +353,16 @@ test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
 	 */
 	chamelium_port_set_edid(data->chamelium, port, alt_edid_id);
 
+	get_connectors_link_status_failed(data, link_status_failed[0]);
+
 	igt_system_suspend_autoresume(state, test);
+
 	igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+
+	get_connectors_link_status_failed(data, link_status_failed[1]);
+
+	for (p = 0; p < data->port_count; p++)
+		igt_skip_on(!link_status_failed[0][p] && link_status_failed[1][p]);
 }
 
 static igt_output_t *
Signature · 6 lines
2.13.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel