iio: srf08: add buffered to device mode
Andreas Klinger
maintainerPATCH 6/7 iio: srf08: add buffered to device mode
Add INDIO_BUFFER_TRIGGERED and INDIO_BUFFER_SOFTWARE to device mode
Signed-off-by Andreas Klinger <[email protected]>
--- drivers/iio/proximity/srf08.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iio/proximity/srf08.c +3 -1
@@ -437,7 +437,9 @@ static int srf08_probe(struct i2c_client *client, indio_dev->name = id->name; indio_dev->dev.parent = &client->dev; - indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->modes =INDIO_DIRECT_MODE + |INDIO_BUFFER_TRIGGERED + |INDIO_BUFFER_SOFTWARE ;/* srf02 is not using sensitivity nor max_range */ if (id->driver_data ==SRF02 )
Signature · 4 lines
2.1.4 --
Jonathan Cameron
maintainerQuoted 12 lines · On Thu, 3 Aug 2017 01:26:09 +0200 Andreas Klinger <[email protected]> wrote:
Add
INDIO_BUFFER_TRIGGEREDandINDIO_BUFFER_SOFTWAREto device modeSigned-off-by Andreas Klinger <[email protected]>--- drivers/iio/proximity/srf08.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/iio/proximity/srf08.c +0
-0
drivers/iio/proximity/srf08.c static int srf08_probe(struct i2c_client *client, · line 441
Quoted 6 lines
drivers/iio/proximity/srf08.c +2
-1@@ -437,7 +437,9 @@ static int srf08_probe(struct i2c_client *client, indio_dev->name = id->name; indio_dev->dev.parent = &client->dev; - indio_dev->modes =INDIO_DIRECT_MODE ; + indio_dev->modes =INDIO_DIRECT_MODE + |INDIO_BUFFER_TRIGGERED
Huh.? Firstly I think only one of these is relevant and secondly should be merged back into the original patch that added the support.
Also the triggered_buffer setup already set it for you...
So all in all, drop this patch.
Jonathan
Quoted 4 lines
drivers/iio/proximity/srf08.c +1
-0+ | INDIO_BUFFER_SOFTWARE;/* srf02 is not using sensitivity nor max_range */ if (id->driver_data ==SRF02 )