HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage

The WACOM_HID_WD_TOUCHRINGSTATUS usage is a single bit which tells us whether the touchring is currently in use or not. Because we need to reset the axis value to 0 when the finger is removed, we call 'wacom_map_usage' to ensure that the required type/code values are associated with the usage. The 'wacom_map_usage' also sets up the axis range and resolution, however, which is not desired in this particular case.

Although xf86-input-wacom doesn't do really do anything with the ring's range or resolution, the libinput driver (for Wayland environments) uses these values to provide proper angle indications to userspace.

---
 drivers/hid/wacom_wac.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

index 149bdff28d32..40d129f8d7e0 100644
@@ -1845,7 +1845,13 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_TOUCHRINGSTATUS:
-		wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
+		/*
+		 * Only set up type/code association. Completely mapping
+		 * this usage may overwrite the axis resolution and range.
+		 */
+		usage->type = EV_ABS;
+		usage->code = ABS_WHEEL;
+		set_bit(EV_ABS, input->evbit);
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_BUTTONCONFIG:

2.13.4

Applied to for-4.13/upstream-fixes. Thanks,

Jiri Kosina
SUSE Labs