hwmon: (adcxx) add devictree bindings documentation

Allow the driver to work with device tree support. Set reference voltage of ADC with device tree property. If not set use default 3300mV.

- reference-voltage-millivolt

Signed-off-by Florian Eckert <[email protected]>

---
 drivers/hwmon/adcxx.c | 57 +++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 51 insertions(+), 6 deletions(-)

drivers/hwmon/adcxx.c +38 -1

index 69e0bb97e597..34e241ea86a0 100644
@@ -4,6 +4,7 @@
  * The adcxx4s is an AD converter family from National Semiconductor (NS).
  *
  * Copyright (c) 2008 Marc Pignat <[email protected]>
+ * Copyright (c) 2017 Florian Eckert <[email protected]>
  *
  * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
  * interface. This driver supports the whole family of devices with name

@@ -46,9 +47,15 @@
 #include <linux/mutex.h>
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 #define DRVNAME		"adcxx"
 
+#define ADCXX1S  1
+#define ADCXX2S  2
+#define ADCXX4S  4
+#define ADCXX8S  8
+
 struct adcxx {
 	struct device *hwmon_dev;
 	struct mutex lock;

@@ -159,21 +166,58 @@ static struct sensor_device_attribute ad_input[] = {
 	SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id adcxx_of_ids[] = {
+	{
+		.compatible = "national,adcxx1s",
+		.data = (void *) ADCXX1S,
+	},
+	{
+		.compatible = "national,adcxx2s",
+		.data = (void *) ADCXX2S,
+	},
+	{
+		.compatible = "national,adcxx4s",
+		.data = (void *) ADCXX4S,
+	},
+	{
+		.compatible = "national,adcxx8s",
+	.	data = (void *) ADCXX8S,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, adcxx_of_ids);
+#endif
+
 /*----------------------------------------------------------------------*/
 
 static int adcxx_probe(struct spi_device *spi)
 {
-	int channels = spi_get_device_id(spi)->driver_data;
+	const struct of_device_id *match;
+	int channels;
 	struct adcxx *adc;
 	int status;
 	int i;
 
+	match = of_match_device(adcxx_of_ids, &spi->dev);
+	if (match)
+		channels = (int)(uintptr_t)match->data;
+	else
+		channels = spi_get_device_id(spi)->driver_data;
+

drivers/hwmon/adcxx.c +5 -4

 	adc->channels = channels;
 	mutex_init(&adc->lock);
 

@@ -223,10 +267,10 @@ static int adcxx_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id adcxx_ids[] = {
-	{ "adcxx1s", 1 },
-	{ "adcxx2s", 2 },
-	{ "adcxx4s", 4 },
-	{ "adcxx8s", 8 },
+	{ "adcxx1s", ADCXX1S },
+	{ "adcxx2s", ADCXX2S },
+	{ "adcxx4s", ADCXX4S },
+	{ "adcxx8s", ADCXX8S },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, adcxx_ids);

@@ -234,6 +278,7 @@ MODULE_DEVICE_TABLE(spi, adcxx_ids);
 static struct spi_driver adcxx_driver = {
 	.driver = {
 		.name	= "adcxx",
+		.of_match_table = of_match_ptr(adcxx_of_ids),
 	},
 	.id_table = adcxx_ids,
 	.probe	= adcxx_probe,

Signature · 6 lines

2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Document the devicetree bindings for the adcxx.

Signed-off-by Florian Eckert <[email protected]>

---
 Documentation/devicetree/bindings/hwmon/adcxx.txt | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adcxx.txt

Documentation/devicetree/bindings/hwmon/adcxx.txt new file +5 -0

new file mode 100644
index 000000000000..7b2a31b95723
@@ -0,0 +1,23 @@
+adcxx properties
+
+Required properties:
+- compatible: Must be one of the following:
+	- "national,adcxx1s" for adcxx1s

Documentation/devicetree/bindings/hwmon/adcxx.txt new file +8 -0

+Example:
+
+adc@6 {
+	compatible = "national,adcxx2s";
+	reg = <6 0>;
+	spi-max-frequency = <1000000>;
+	reference-voltage-millivolt = <3247>; /* 3.247 V */
+};

Signature · 1 line

2.11.0