Add vram write functionality
PATCH 1/1 Add vram write functionality
Also add --vram-read and -vr which will eventually replace --vram and -v.
Signed-off-by Tom St Denis <[email protected]>
--- doc/umr.1 | 6 ++++- src/app/main.c | 43 +++++++++++++++++++++++++++++--- src/lib/read_vram.c | 72 ++++++++++++++++++++++++++++++++++------------------- src/umr.h | 6 ++++- 4 files changed, 97 insertions(+), 30 deletions(-)
doc/umr.1 +5 -1
@@ -94,12 +94,16 @@ The VMID can be specified in hexadecimal (with leading '0x') or in decimal. Implies '-O verbose' for the duration of the command so does not require it to be manually specified. -.IP "--vram, -v [vmid@]<address> <size>" +.IP "--vram-read, -vr [vmid@]<address> <size>" Read 'size' bytes (in hex) from the address specified (in hexadecimal) from VRAM to stdout. Optionally specify the VMID (in decimal or in hex with a 0x prefix) treating the address as a virtual address instead. Can use 'use_pci' to directly access VRAM. +.IP "--vram-write, -vw [vmid@]<address> <size>" +Write 'size' bytes (in hex) to the address specified (in hexadecimal) to VRAM +from stdin. + .IP "--update, -u" <filename> Specify update file to add, change, or delete registers from the register database. Useful for adding registers that are not including in the kernel headers.
src/app/main.c +40 -3
65 lines not on this page · raw message
src/lib/read_vram.c +47 -25
157 lines not on this page · raw message
src/umr.h +5 -1
@@ -545,7 +545,11 @@ int umr_sq_cmd_halt_waves(struct umr_asic *asic, enum umr_sq_cmd_halt_resume mod/* IB/ring decoding/dumping/etc */ void umr_print_decode (struct umr_asic *asic,struct umr_ring_decoder *decoder,uint32_t ib);void umr_dump_ib (struct umr_asic *asic,struct umr_ring_decoder *decoder); -int umr_read_vram (struct umr_asic *asic,uint32_t vmid,uint64_t address,uint32_t size,void *dst); + +// memory access +int umr_access_vram (struct umr_asic *asic,uint32_t vmid,uint64_t address,uint32_t size,void *data,int write_en); +#define umr_read_vram (asic, vmid, address, size, dst) umr_access_vram(asic, vmid, address, size, dst, 0) +#define umr_write_vram (asic, vmid, address, size, src) umr_access_vram(asic, vmid, address, size, src, 1)#define RED (options.use_colour ? "\x1b[31;1m" : "")#define YELLOW (options.use_colour ? "\x1b[33;1m" : "")
Signature · 6 lines
2.12.0 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx