ARM: dts: sun6i: a31: Add DAI nodes
Subsystems (2)
PATCH 1/1 ARM: dts: sun6i: a31: Add DAI nodes
From: Marcus Cooper <[email protected]>
Add the new DAI blocks to the device tree.
Signed-off-by Marcus Cooper <[email protected]>
--- arch/arm/boot/dts/sun6i-a31.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
arch/arm/boot/dts/sun6i-a31.dtsi +26 -0
@@ -662,6 +662,32 @@ status = "disabled"; }; + i2s0: i2s at 01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s at 01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc at 01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>;
Signature · 1 line
2.14.1
PATCH 1/1 ARM: dts: sun6i: a31: Add DAI nodes
Quoted 5 lines · On 3 September 2017 at 17:08, <[email protected]> wrote:
From: Marcus Cooper <[email protected]>
Add the new DAI blocks to the device tree.
Signed-off-by Marcus Cooper <[email protected]>
Hi all,
I haven't got a dev board for this SoC but was able to confirm that this worked by setting the loopback bit and recording the playback. BR,
CK
Quoted 44 lines
--- arch/arm/boot/dts/sun6i-a31.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)arch/arm/boot/dts/sun6i-a31.dtsi +26
-1@@ -662,6 +662,32 @@ status = "disabled"; }; + i2s0: i2s at 01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s at 01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc at 01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; --2.14.1
PATCH 1/1 ARM: dts: sun6i: a31: Add DAI nodes
In reply to codekipper at gmail.comQuoted 5 lines · codekipper at gmail.com
From: Marcus Cooper <[email protected]>
Add the new DAI blocks to the device tree.
Signed-off-by Marcus Cooper <[email protected]>
Applied for 4.15, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170904/0e2d2bb1/attachment-0001.sig>