usb: gadget: dummy: fix nonsensical comparisons
PATCH v2 1/1 usb: gadget: dummy: fix nonsensical comparisons
gcc-8 points out two comparisons that are clearly bogus and almost certainly not what the author intended to write:
drivers/usb/gadget/udc/dummy_hcd.c: In function 'set_link_state_by_speed':drivers/usb/gadget/udc/dummy_hcd.c:379:31: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
USB_PORT_STAT_ENABLE) == 1 &&
^~
drivers/usb/gadget/udc/dummy_hcd.c:381:25: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
USB_SS_PORT_LS_U0) == 1 &&
^~I looked at the code for a bit and came up with a change that makes it look like what the author probably meant here. This makes it look reasonable to me and to gcc, shutting up the warning.
It does of course change behavior as the two conditions are actually evaluated rather than being hardcoded to false, and I have made no attempt at verifying that the changed logic makes sense in the context of a USB HCD, so that part needs to be reviewed carefully.
---
v2: simplify the expression as suggested by Alan Stern
--- drivers/usb/gadget/udc/dummy_hcd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/usb/gadget/udc/dummy_hcd.c +4 -5
@@ -375,11 +375,10 @@ static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) USB_PORT_STAT_CONNECTION) == 0) dum_hcd->port_status |= (USB_PORT_STAT_C_CONNECTION <<16 ); -if ((dum_hcd->port_status & -USB_PORT_STAT_ENABLE ) ==1 && - (dum_hcd->port_status & -USB_SS_PORT_LS_U0 ) ==1 && - dum_hcd->rh_state !=DUMMY_RH_SUSPENDED ) +if ((dum_hcd->port_status &USB_PORT_STAT_ENABLE ) && + (dum_hcd->port_status & +USB_PORT_STAT_LINK_STATE ) ==USB_SS_PORT_LS_U0 && + dum_hcd->rh_state !=DUMMY_RH_SUSPENDED ) dum_hcd->active =1 ; } }else {
Signature · 1 line
2.9.0
Quoted 40 lines · Arnd Bergmann
gcc-8 points out two comparisons that are clearly bogus and almost certainly not what the author intended to write:
drivers/usb/gadget/udc/dummy_hcd.c: In function 'set_link_state_by_speed':drivers/usb/gadget/udc/dummy_hcd.c:379:31: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]USB_PORT_STAT_ENABLE) == 1 && ^~ drivers/usb/gadget/udc/dummy_hcd.c:381:25: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] USB_SS_PORT_LS_U0) == 1 && ^~I looked at the code for a bit and came up with a change that makes it look like what the author probably meant here. This makes it look reasonable to me and to gcc, shutting up the warning.
It does of course change behavior as the two conditions are actually evaluated rather than being hardcoded to false, and I have made no attempt at verifying that the changed logic makes sense in the context of a USB HCD, so that part needs to be reviewed carefully.
Fixes 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")Cc Tatyana Brokhman <[email protected]>Cc Felipe Balbi <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>---
v2: simplify the expression as suggested by Alan Stern--- drivers/usb/gadget/udc/dummy_hcd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)drivers/usb/gadget/udc/dummy_hcd.c +0
-2@@ -375,11 +375,10 @@ static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) USB_PORT_STAT_CONNECTION) == 0) dum_hcd->port_status |= (USB_PORT_STAT_C_CONNECTION <<16 ); - if ((dum_hcd->port_status & - USB_PORT_STAT_ENABLE) == 1 &&
drivers/usb/gadget/udc/dummy_hcd.c static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) · line 384
Quoted 10 lines
drivers/usb/gadget/udc/dummy_hcd.c +4
-3- (dum_hcd->port_status & -USB_SS_PORT_LS_U0 ) ==1 && - dum_hcd->rh_state != DUMMY_RH_SUSPENDED) +if ((dum_hcd->port_status &USB_PORT_STAT_ENABLE ) && + (dum_hcd->port_status & +USB_PORT_STAT_LINK_STATE ) ==USB_SS_PORT_LS_U0 && + dum_hcd->rh_state !=DUMMY_RH_SUSPENDED ) dum_hcd->active =1 ; } }else {