staging: wlan-ng: Replace pr_debug with netdev_dbg

This patch replace pr_debug with netdev_dbg when appropriate net_device structure is found.
Issue found using the following Coccinelle script:

@r exists@
identifier f, s, i;
position p;
@@

f(...,struct s *i,...) {
<+... when != i == NULL
(
pr_err@p(...);
|
pr_info@p(...);
|
pr_debug@p(...);
)
...+>
}

@rr@
identifier r.s, fld;
@@

struct s {
	...
	struct net_device *fld;
	... };

@@
identifier r.i, r.s, rr.fld;
position r.p;
@@
(

(quoted diff) +1 -1

-pr_err@p
+netdev_err

	(

+ i->fld,
...)
|

(quoted diff) +1 -1

-pr_info@p
+netdev_info

	(

+ i->fld,
...)
|

(quoted diff) +1 -1

-pr_debug@p
+netdev_dbg

	(

+ i->fld,
...)
)

Signed-off-by Haneen Mohammed <[email protected]>

---
 drivers/staging/wlan-ng/prism2mgmt.c | 78 ++++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 31 deletions(-)

drivers/staging/wlan-ng/prism2mgmt.c +47 -32

index c4aa9e7..7207059 100644
@@ -394,8 +394,9 @@ int prism2mgmt_scan_results(struct wlandevice *wlandev, void *msgp)
 		count = HFA384x_SCANRESULT_MAX;
 
 	if (req->bssindex.data >= count) {
-		pr_debug("requested index (%d) out of range (%d)\n",
-			 req->bssindex.data, count);
+		netdev_dbg(wlandev->netdev,
+			   "requested index (%d) out of range (%d)\n",
+			   req->bssindex.data, count);
 		result = 2;
 		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 		goto exit;

@@ -684,7 +685,8 @@ int prism2mgmt_start(struct wlandevice *wlandev, void *msgp)
 
 	goto done;
 failed:
-	pr_debug("Failed to set a config option, result=%d\n", result);
+	netdev_dbg(wlandev->netdev,
+		   "Failed to set a config option, result=%d\n", result);
 	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 
 done:

@@ -1120,15 +1122,17 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 		/* Disable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
 		if (result) {
-			pr_debug("failed to disable monitor mode, result=%d\n",
-				 result);
+			netdev_dbg(wlandev->netdev,
+				   "failed to disable monitor mode, result=%d\n",
+				   result);
 			goto failed;
 		}
 		/* Disable port 0 */
 		result = hfa384x_drvr_disable(hw, 0);
 		if (result) {
-			pr_debug
-			("failed to disable port 0 after sniffing, result=%d\n",
+			netdev_dbg
+			(wlandev->netdev,
+			     "failed to disable port 0 after sniffing, result=%d\n",
 			     result);
 			goto failed;
 		}

@@ -1140,8 +1144,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 						  HFA384x_RID_CNFWEPFLAGS,
 						  hw->presniff_wepflags);
 		if (result) {
-			pr_debug
-			    ("failed to restore wepflags=0x%04x, result=%d\n",
+			netdev_dbg
+			    (wlandev->netdev,
+			     "failed to restore wepflags=0x%04x, result=%d\n",
 			     hw->presniff_wepflags, result);
 			goto failed;
 		}

@@ -1153,8 +1158,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 						  HFA384x_RID_CNFPORTTYPE,
 						  word);
 			if (result) {
-				pr_debug
-				    ("failed to restore porttype, result=%d\n",
+				netdev_dbg
+				    (wlandev->netdev,
+				     "failed to restore porttype, result=%d\n",
 				     result);
 				goto failed;
 			}

@@ -1162,8 +1168,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 			/* Enable the port */
 			result = hfa384x_drvr_enable(hw, 0);
 			if (result) {
-				pr_debug("failed to enable port to presniff setting, result=%d\n",
-					 result);
+				netdev_dbg(wlandev->netdev,
+					   "failed to enable port to presniff setting, result=%d\n",
+					   result);
 				goto failed;
 			}
 		} else {

@@ -1182,8 +1189,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 						  HFA384x_RID_CNFPORTTYPE,
 						  &(hw->presniff_port_type));
 				if (result) {
-					pr_debug
-					("failed to read porttype, result=%d\n",
+					netdev_dbg
+					(wlandev->netdev,
+					     "failed to read porttype, result=%d\n",
 					     result);
 					goto failed;
 				}

@@ -1192,24 +1200,27 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 						  HFA384x_RID_CNFWEPFLAGS,
 						  &(hw->presniff_wepflags));
 				if (result) {
-					pr_debug
-					("failed to read wepflags, result=%d\n",
+					netdev_dbg
+					(wlandev->netdev,
+					     "failed to read wepflags, result=%d\n",
 					     result);
 					goto failed;
 				}
 				hfa384x_drvr_stop(hw);
 				result = hfa384x_drvr_start(hw);
 				if (result) {
-					pr_debug("failed to restart the card for sniffing, result=%d\n",
-						 result);
+					netdev_dbg(wlandev->netdev,
+						   "failed to restart the card for sniffing, result=%d\n",
+						   result);
 					goto failed;
 				}
 			} else {
 				/* Disable the port */
 				result = hfa384x_drvr_disable(hw, 0);
 				if (result) {
-					pr_debug("failed to enable port for sniffing, result=%d\n",
-						 result);
+					netdev_dbg(wlandev->netdev,
+						   "failed to enable port for sniffing, result=%d\n",
+						   result);
 					goto failed;
 				}
 			}

@@ -1225,8 +1236,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 		hw->sniff_channel = word;
 
 		if (result) {
-			pr_debug("failed to set channel %d, result=%d\n",
-				 word, result);
+			netdev_dbg(wlandev->netdev,
+				   "failed to set channel %d, result=%d\n",
+				   word, result);
 			goto failed;
 		}
 

@@ -1238,8 +1250,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 						  HFA384x_RID_CNFPORTTYPE,
 						  word);
 			if (result) {
-				pr_debug
-				    ("failed to set porttype %d, result=%d\n",
+				netdev_dbg
+				    (wlandev->netdev,
+				     "failed to set porttype %d, result=%d\n",
 				     word, result);
 				goto failed;
 			}

@@ -1257,8 +1270,9 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 			}
 
 			if (result) {
-				pr_debug
-				  ("failed to set wepflags=0x%04x, result=%d\n",
+				netdev_dbg
+				  (wlandev->netdev,
+				   "failed to set wepflags=0x%04x, result=%d\n",
 				   word, result);
 				goto failed;
 			}

@@ -1283,16 +1297,18 @@ int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
 		/* Enable the port */
 		result = hfa384x_drvr_enable(hw, 0);
 		if (result) {
-			pr_debug
-			    ("failed to enable port for sniffing, result=%d\n",
+			netdev_dbg
+			    (wlandev->netdev,
+			     "failed to enable port for sniffing, result=%d\n",
 			     result);
 			goto failed;
 		}
 		/* Enable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
 		if (result) {
-			pr_debug("failed to enable monitor mode, result=%d\n",
-				 result);
+			netdev_dbg(wlandev->netdev,
+				   "failed to enable monitor mode, result=%d\n",
+				   result);
 			goto failed;
 		}
 
--

2.7.4

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170913043225.GA9679%40Haneen.
For more options, visit https://groups.google.com/d/optout.