drm/i915/mst: Use MST sideband message transactions for dpms control
Subsystems (2)
PATCH v2 1/1 drm/i915/mst: Use MST sideband message transactions for dpms control
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.
$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto
v2: Modify and document the dpms and port disable order (Ville)
Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)
--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 13 +++++++++---- 2 files changed, 23 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +14 -4
@@ -2161,7 +2161,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp);
@@ -2235,12 +2236,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from DP_MST */ -if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from +* DP_MST. The main connector associated with this port is never +* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end +* up getting interrupts from the sink on detecting link loss. +*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));
drivers/gpu/drm/i915/intel_dp_mst.c +9 -4
@@ -164,15 +164,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ; -if (intel_dp->active_mst_links ==0 ) { +if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); - } } static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
@@ -197,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("%d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/mst: Use MST sideband message transactions for dpms control
== Series Details ==
== Series Details ==
Series: drm/i915/mst: Use MST sideband message transactions for dpms control
URL : https://patchwork.freedesktop.org/series/30314/
State : success
== Summary ==
Series 30314v1 drm/i915/mst: Use MST sideband message transactions for dpms control
https://patchwork.freedesktop.org/api/1.0/series/30314/revisions/1/mbox/
Test chamelium:
Subgroup dp-crc-fast:
pass -> FAIL (fi-kbl-7500u) fdo#102514
Test kms_flip:
Subgroup basic-flip-vs-modeset:
pass -> SKIP (fi-skl-x1585l) fdo#101781
Test kms_frontbuffer_tracking:
Subgroup basic:
dmesg-warn -> PASS (fi-bdw-5557u) fdo#102473
Test pm_rpm:
Subgroup basic-rte:
pass -> DMESG-WARN (fi-cfl-s) fdo#102294fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#101781 https://bugs.freedesktop.org/show_bug.cgi?id=101781
fdo#102473 https://bugs.freedesktop.org/show_bug.cgi?id=102473
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:442s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:461s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:375s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:529s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:272s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:506s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:501s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:493s fi-cfl-s total:289 pass:222 dwarn:35 dfail:0 fail:0 skip:32 time:558s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:453s fi-glk-2a total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:598s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:428s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:408s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:440s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:477s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:463s fi-kbl-7500u total:289 pass:263 dwarn:1 dfail:0 fail:1 skip:24 time:481s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:583s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:585s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:554s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:459s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:525s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:507s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:465s fi-skl-x1585l total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:475s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:571s fi-snb-2600 total:289 pass:248 dwarn:0 dfail:0 fail:2 skip:39 time:429s
fd4b78812edddb5118f97329ba04f36483e16e2a drm-tip: 2017y-09m-13d-17h-15m-44s UTC integration manifest d5c4681f997d drm/i915/mst: Use MST sideband message transactions for dpms control
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5688/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915/mst: Use MST sideband message transactions for dpms control
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: drm/i915/mst: Use MST sideband message transactions for dpms control
URL : https://patchwork.freedesktop.org/series/30314/
State : success
== Summary ==
Test kms_setmode:
Subgroup basic:
fail -> PASS (shard-hsw) fdo#99912
Test gem_eio:
Subgroup in-flight:
fail -> PASS (shard-hsw) fdo#102616
Test kms_flip:
Subgroup wf_vblank-vs-dpms:
dmesg-warn -> PASS (shard-hsw)
Test perf:
Subgroup blocking:
pass -> FAIL (shard-hsw) fdo#102252
Test gem_flink_race:
Subgroup flink_close:
fail -> PASS (shard-hsw) fdo#102655fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102616 https://bugs.freedesktop.org/show_bug.cgi?id=102616
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#102655 https://bugs.freedesktop.org/show_bug.cgi?id=102655
shard-hsw total:2313 pass:1245 dwarn:0 dfail:0 fail:13 skip:1055 time:9340s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5688/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 107 lines · Dhinakaran Pandiyan
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_stateequivalence(Ville, Maarten)Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 13 +++++++++---- 2 files changed, 23 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +2
-1@@ -2161,7 +2161,8 @@ static void intel_ddi_pre_enable_dp(structintel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder );intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )drivers/gpu/drm/i915/intel_ddi.c +0
-1intel_dp_stop_link_train (intel_dp);@@ -2235,12 +2236,21 @@ static void intel_ddi_post_disable(structintel_encoder *intel_encoder, uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from
DP_MST*/drivers/gpu/drm/i915/intel_ddi.c +2
-1-if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* DP_MST. The main connector associated with this port is never
drivers/gpu/drm/i915/intel_ddi.c +5
-1+* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* up getting interrupts from the sink on detecting link loss.
drivers/gpu/drm/i915/intel_ddi.c +3
-0+*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +8
-4@@ -164,15 +164,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ; -if (intel_dp->active_mst_links ==0 ) { +if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); - } }static void intel_mst_pre_enable_dp(struct
intel_encoder*encoder,drivers/gpu/drm/i915/intel_dp_mst.c +1
-0@@ -197,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("%d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 )
drivers/gpu/drm/i915/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_encoder *encoder, · line 207
Quoted 2 lines
drivers/gpu/drm/i915/intel_dp_mst.c +0
-0intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Op 13-09-17 om 22:06 schreef Dhinakaran Pandiyan:
Quoted 10 lines
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto
Quoted 7 lines
v2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_stateequivalence(Ville, Maarten)Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>
Quoted 73 lines
--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 13 +++++++++---- 2 files changed, 23 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +14
-4@@ -2161,7 +2161,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp);@@ -2235,12 +2236,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from DP_MST */ -if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from +* DP_MST. The main connector associated with this port is never +* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end +* up getting interrupts from the sink on detecting link loss. +*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +8
-4@@ -164,15 +164,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ; -if (intel_dp->active_mst_links ==0 ) { +if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); - } } static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
drivers/gpu/drm/i915/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_encoder *encoder, · line 207
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_mst.c +1
-0@@ -197,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("%d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Dhinakaran Pandiyan
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.
Quoted 8 lines
$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_stateequivalence(Ville, Maarten)
The patch probably does not fix all problems of these bugs, but some problems do go away.
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124
Thanks for the reviews.
-DK
Quoted 77 lines
Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 13 +++++++++---- 2 files changed, 23 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +14
-4@@ -2161,7 +2161,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp);@@ -2235,12 +2236,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from DP_MST */ -if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from +* DP_MST. The main connector associated with this port is never +* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end +* up getting interrupts from the sink on detecting link loss. +*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +8
-4@@ -164,15 +164,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ; -if (intel_dp->active_mst_links ==0 ) { +if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); - } } static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
drivers/gpu/drm/i915/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_encoder *encoder, · line 207
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_mst.c +1
-0@@ -197,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("%d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/1 drm/i915/mst: Use MST sideband message transactions for dpms control
In reply to Dhinakaran PandiyanFrom: Dhinakaran Pandiyan <[email protected]>
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.
$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto
v2: Modify and document the dpms and port disable order (Ville)
Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)
v3 by Jani: rebase
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124
--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 10 ++++++++-- 2 files changed, 22 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +14 -4
@@ -2162,7 +2162,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp);
@@ -2236,12 +2237,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from DP_MST */ -if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from +* DP_MST. The main connector associated with this port is never +* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end +* up getting interrupts from the sink on detecting link loss. +*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));
drivers/gpu/drm/i915/intel_dp_mst.c +8 -2
@@ -162,14 +162,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ;if (intel_dp->active_mst_links ==0 ) { intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); }DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); }
@@ -196,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 17 lines · Jani Nikula
From: Dhinakaran Pandiyan <[email protected]>
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_stateequivalence(Ville, Maarten)v3 by Jani: rebase
Quoted 7 lines
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Reviewed-by Lyude Paul <[email protected]>
Lyude, Maarten, can you confirm your rb/ack on my rebase please?
BR,
Jani.
Quoted 80 lines
Signed-off-by Dhinakaran Pandiyan <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 10 ++++++++-- 2 files changed, 22 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +14
-4@@ -2162,7 +2162,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp);@@ -2236,12 +2237,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from DP_MST */ -if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from +* DP_MST. The main connector associated with this port is never +* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end +* up getting interrupts from the sink on detecting link loss. +*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +8
-2@@ -162,14 +162,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end +* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ;if (intel_dp->active_mst_links ==0 ) { intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); }DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); }@@ -196,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 ) intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Op 04-10-17 om 10:47 schreef Jani Nikula:
Quoted 18 lines · Jani Nikula
Quoted 17 lines
From: Dhinakaran Pandiyan <[email protected]>
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_stateequivalence(Ville, Maarten)v3 by Jani: rebase
Quoted 9 lines
Quoted 7 lines
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Reviewed-by Lyude Paul <[email protected]>Lyude, Maarten, can you confirm your rb/ack on my rebase please?
Rebase looks good.
ack stands.
:)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 27 lines · Jani Nikula
Quoted 18 lines · Jani Nikula
From: Dhinakaran Pandiyan <[email protected]>
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_state equivalence(Ville,
Maarten)v3 by Jani: rebase
Quoted 7 lines
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Reviewed-by Lyude Paul <[email protected]>
Quoted 1 line
Lyude, Maarten, can you confirm your rb/ack on my rebase please?
Looks good to me
Quoted 91 lines
BR,
Jani.Quoted 86 lines
Signed-off-by Dhinakaran Pandiyan <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 10 ++++++++-- 2 files changed, 22 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +2
-1@@ -2162,7 +2162,8 @@ static void intel_ddi_pre_enable_dp(structintel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder );intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )drivers/gpu/drm/i915/intel_ddi.c +0
-1intel_dp_stop_link_train (intel_dp);@@ -2236,12 +2237,21 @@ static void intel_ddi_post_disable(structintel_encoder *intel_encoder, uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from
DP_MST*/drivers/gpu/drm/i915/intel_ddi.c +2
-1-if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* DP_MST. The main connector associated with this port is never
drivers/gpu/drm/i915/intel_ddi.c +5
-1+* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* up getting interrupts from the sink on detecting link loss.
drivers/gpu/drm/i915/intel_ddi.c +3
-0+*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +2
-0@@ -162,14 +162,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end
drivers/gpu/drm/i915/intel_dp_mst.c +5
-2+* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ;if (intel_dp->active_mst_links ==0 ) { intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); }DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); }@@ -196,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_encoder *encoder, · line 207
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_mst.c +1
-0DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 )drivers/gpu/drm/i915/intel_dp_mst.c +0
-0intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 28 lines · Lyude Paul
Quoted 27 lines · Jani Nikula
Quoted 25 lines · Jani Nikula
From: Dhinakaran Pandiyan <[email protected]>
Use the
POWER_DOWN_PHYandPOWER_UP_PHYsideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me.$ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --autov2: Modify and document the dpms and port disable order (Ville)
Add comment explainingis_mst= !crtc_state equivalence(Ville,
Maarten)v3 by Jani: rebase
References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124Cc Ville Syrjälä <[email protected]>Cc Lyude <[email protected]>Cc Maarten Lankhorst <[email protected]>Reviewed-by Lyude Paul <[email protected]>
Quoted 2 lines
Quoted 1 line
Lyude, Maarten, can you confirm your rb/ack on my rebase please?
Looks good to me
Thanks Maarten and Lyude, pushed to dinq.
BR,
Jani.
Quoted 100 lines
Quoted 100 lines
BR,
Jani.Quoted 93 lines
Signed-off-by Dhinakaran Pandiyan <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 10 ++++++++-- 2 files changed, 22 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +2
-1@@ -2162,7 +2162,8 @@ static void intel_ddi_pre_enable_dp(structintel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder );intel_ddi_init_dp_buf_reg (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +if (!link_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON );intel_dp_start_link_train (intel_dp);if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )drivers/gpu/drm/i915/intel_ddi.c +0
-1intel_dp_stop_link_train (intel_dp);@@ -2236,12 +2237,21 @@ static void intel_ddi_post_disable(structintel_encoder *intel_encoder, uint32_t val;bool wait = false; -/* old_crtc_state and old_conn_state are NULL when called from
DP_MST*/drivers/gpu/drm/i915/intel_ddi.c +2
-1-if (type ==INTEL_OUTPUT_DP || type ==INTEL_OUTPUT_EDP ) { +/* +* old_crtc_state and old_conn_state are NULL when called from
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* DP_MST. The main connector associated with this port is never
drivers/gpu/drm/i915/intel_ddi.c +5
-1+* bound to a crtc for MST. +*/ +bool is_mst = !old_crtc_state;struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); +/* +* Power down sink before disabling the port, otherwise we end
drivers/gpu/drm/i915/intel_ddi.c +1
-0+* up getting interrupts from the sink on detecting link loss.
drivers/gpu/drm/i915/intel_ddi.c +3
-0+*/ +if (!is_mst) +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); } val =I915_READ (DDI_BUF_CTL (port));drivers/gpu/drm/i915/intel_dp_mst.c +2
-0@@ -162,14 +162,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,drm_dp_mst_deallocate_vcpi (&intel_dp->mst_mgr, connector->port); +/* +* Power down mst path before disabling the port, otherwise we end
drivers/gpu/drm/i915/intel_dp_mst.c +6
-2+* up getting interrupts from the sink upon detecting link loss. +*/ +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, + false); + intel_dp->active_mst_links--; intel_mst->connector =NULL ;if (intel_dp->active_mst_links ==0 ) { intel_dig_port->base.post_disable (&intel_dig_port->base,NULL ,NULL ); - -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_OFF ); }DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); }@@ -196,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,DRM_DEBUG_KMS ("active links %d\n" , intel_dp->active_mst_links); +drm_dp_send_power_updown_phy (&intel_dp->mst_mgr, connector->port, true);if (intel_dp->active_mst_links ==0 )drivers/gpu/drm/i915/intel_dp_mst.c +0
-0intel_dig_port->base.pre_enable (&intel_dig_port->base, pipe_config,NULL );
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/mst: Use MST sideband message transactions for dpms control (rev2)
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: drm/i915/mst: Use MST sideband message transactions for dpms control (rev2)
URL : https://patchwork.freedesktop.org/series/30314/
State : success
== Summary ==
Series 30314v2 drm/i915/mst: Use MST sideband message transactions for dpms control
https://patchwork.freedesktop.org/api/1.0/series/30314/revisions/2/mbox/
Test chamelium:
Subgroup dp-crc-fast:
pass -> FAIL (fi-kbl-7500u) fdo#102514
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (fi-byt-n2820) fdo#101705fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:460s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:470s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:396s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:584s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:286s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:523s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:535s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:547s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:530s fi-cfl-s total:289 pass:256 dwarn:1 dfail:0 fail:0 skip:32 time:559s fi-cnl-y total:289 pass:261 dwarn:1 dfail:0 fail:0 skip:27 time:617s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:431s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:594s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:441s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:420s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:465s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:508s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:481s fi-kbl-7500u total:289 pass:263 dwarn:1 dfail:0 fail:1 skip:24 time:491s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:578s fi-kbl-7567u total:289 pass:265 dwarn:4 dfail:0 fail:0 skip:20 time:489s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:589s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:658s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:471s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:533s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:511s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:474s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:582s fi-snb-2600 total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:433s
5a0359bf59aa712a9e81ce7f75c3cd3c884cfeee drm-tip: 2017y-10m-03d-13h-34m-56s UTC integration manifest 984a2fb137ef drm/i915/mst: Use MST sideband message transactions for dpms control
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5880/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915/mst: Use MST sideband message transactions for dpms control (rev2)
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: drm/i915/mst: Use MST sideband message transactions for dpms control (rev2)
URL : https://patchwork.freedesktop.org/series/30314/
State : success
== Summary ==
Test kms_cursor_legacy:
Subgroup pipe-B-torture-bo:
incomplete -> PASS (shard-hsw)
Test perf:
Subgroup blocking:
pass -> FAIL (shard-hsw) fdo#102252fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-hsw total:2429 pass:1313 dwarn:7 dfail:0 fail:26 skip:1083 time:9979s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5880/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx