N900 flashlight
Subsystems (2)
Hi!
This adds /sys interface to n900 flash. So you can do stuff...
/sys/class/leds/led-controller:flash# echo 0 > ../led-controller\:indicator/brightness
Needs _way_ more work. Also... contains way too much boilerplate, see leds-flash.c . We'll need to figure out how to share more code between drivers.
GPL.
Best regards,
Pavel
arch/arm/boot/dts/omap3-n900.dts +7 -2
@@ -618,16 +618,21 @@ }; adp1653: led-controller at 30 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "adi,adp1653"; reg = <0x30>; enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ - flash { + adp_flash: flash at 0 { + reg = <0x0>; flash-timeout-us = <500000>; flash-max-microamp = <320000>; led-max-microamp = <50000>; }; - indicator { + adp_indicator: indicator at 1 { + reg = <0x1>; led-max-microamp = <17500>; }; };
drivers/leds/Makefile +3 -0
@@ -7,6 +7,9 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o obj-$(CONFIG_LEDS_CLASS_FLASH) += led-class-flash.o obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o +obj-$(CONFIG_LEDS_CLASS_FLASH) += leds-flash.o +obj-y += leds-adp1653.o + # LED Platform Drivers obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
drivers/leds/leds-adp1653.c new file +756 -0
756 lines not on this page · raw message
drivers/leds/leds-flash.c new file +620 -0
620 lines not on this page · raw message
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170915/16d37d95/attachment-0001.sig>