Module parameters to override color management/dithering.
Subsystems (2)
Hi,
so these two patches add i915 module parameters to globally override how the driver handles dithering and gamma/csc conversion.
They serve two purposes: First as debug aid and "airbag" for working around potential precision problems in getting pixels from rendering to the display outputs. This mostly for applications that critically depend on getting pixels untampered from the fb to the outputs, e.g., scientific neuro-science/vision research/medical applications. Having the ability to bypass parts of the pipeline can help a lot in debugging such problems on remote user machines, and to allow such users to work around the problems until proper fixes are made. I expect this to become especially useful when dealing with all the Wayland compositor implementations, which so far don't have a standardized application/user controllable equivalent to RandR protocol / xrandr tools.
The second, short-term purpose is to enable true 10 bit output from rendering, so people with urgent 10 bit precision needs can benefit from the Mesa patches i started working on for i965 (rev 1 on the mailing-list, rev 2 to come soon).
I realize the merge window for Linux 4.14 is almost over, but wanted to ask if it would be possible to slip these patches into 4.14 if they aren't considered too intrusive?
These are tested on Ironlake, Ivybridge, Haswell and Skylake, also with a photometer to see what actually comes out of the display for different settings.
The bigger plan is to enhance the gamma table support, so we could also use > 8 bit precision gamma tables on Ironlake and later, both for the legacy gamma ioctl and the new color mgmt. method. I do have proof of concept patches for using the 1024->10 precision luts on Ironlake and later. Tweaking the gamma tables i upload via RandR and measuring with photometer showed my poc patches work. However, as described in the 2nd patch, at least the tested legacy luts and 1024->10 precision luts seem to get mostly ignored/bypassed in the hw when a XR30 fb is attached to the primary plane. Not sure if some setup is missing, or if this is some hardware quirk? Couldn't find anything in the PRM's so far.
What i'd actually like to implement for Ironlake+ instead of the 1024->10 bit luts is this:
If in dual-gamma lut mode, or if the input gamma table is not monotonically increasing, do what is done now (legacy luts for legacy gamma ioctl, split 512->10 big luts for new path).
If only a single gamma lut is requested (DEGAMMA_LUT == 0), and the provided input lut is monotonically increasing, switch to the linearly interpolated 512->12 bit lut instead, which exists on Ironlake+. Also for the legacy gamma ioctl, so existing apps can benefit from the higher precision. This would enable > 8 bit framebuffers to be output properly and with high quality gamma correction.
Thanks,
-mario
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/2 drm/i915: Add module parameter to force en-/disable dithering.
i915.enable_dithering allows to force dithering on all outputs on (=1) or off (=0). The default is -1 for current automatic per-pipe selection.
This is useful for debugging and for special case scenarios, e.g., providing simulated 10 bpc output on 8 bpc digital sinks if a 10 bpc framebuffer + rendering is in use.
A more flexible solution would be connector properties, like other drivers (radeon, amdgpu, nouveau) already provide. A global override via module parameter is useful even with such connector properties, e.g., for scientific applications which require strict control over dithering, to have an override for DE's which may not expose such properties via some standard protocol in a user-controllable way, e.g., afaik all currently existing Wayland compositors.
Tested on Ironlake, IvyBridge, Haswell, Skylake.
--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_display.c | 5 +++++ 3 files changed, 11 insertions(+)
drivers/gpu/drm/i915/i915_params.c +5 -0
@@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = { .inject_load_failure = 0, .enable_dpcd_backlight = false, .enable_gvt = false, + .enable_dithering = -1, };module_param_named (modeset, i915.modeset, int,0400 );
@@ -257,3 +258,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight,module_param_named (enable_gvt, i915.enable_gvt, bool,0400 );MODULE_PARM_DESC (enable_gvt,"Enable support for Intel GVT-g graphics virtualization host support(default:false)" ); + +module_param_named (enable_dithering, i915.enable_dithering, int,0644 ); +MODULE_PARM_DESC (enable_dithering, +"Enable dithering (-1=auto [default], 0=force off on all outputs, 1=force on on all outputs)" );
drivers/gpu/drm/i915/i915_params.h +1 -0
@@ -54,6 +54,7 @@func (int, edp_vswing); \func (int, reset); \ func(unsigned int, inject_load_failure); \ +func (int, enable_dithering); \/* leave bools at the end to not create holes */ \func (bool, alpha_support); \func (bool, enable_cmd_parser); \
drivers/gpu/drm/i915/intel_display.c +5 -0
@@ -10978,6 +10978,11 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,*/ pipe_config->dither = (pipe_config->pipe_bpp ==6 *3 ) && !pipe_config->dither_force_disable; + +/* Override of auto-selected dither mode via module parameter? */ +if (i915.enable_dithering !=-1 ) + pipe_config->dither = i915.enable_dithering >0 ? true : false; +DRM_DEBUG_KMS ("hw max bpp: %i, pipe bpp: %i, dithering: %i\n" , base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
Signature · 6 lines
2.13.0.rc1.294.g07d810a77f _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: Add module parameter to en-/disable hw color correction.
In reply to Mario KleinerThe new module parameter enable_hw_color_correction defaults to true, to retain the current behaviour. If set to false, it will disable all hardware color correction, like gamma/degamma and csc.
This is useful for debugging gamma table / csc precision problems, and to ensure unmodified pixel passthrough from framebuffer to outputs, e.g., for scientific applications which critically depend on perfect pixel passthrough. While i hope this switch generally won't be needed, it provides extra peace-of-mind - an "airbag" for color correction trouble.
Tested on Ironlake, IvyBridge, Haswell, Skylake.
One unexpected result during testing was that while this works on all tested gpu's with a 8 bpc XR24 framebuffer as primary plane, if a 10 bpc XR30 fb is active, then hw gamma tables seem to get automatically bypassed on at least the tested IvyBridge and later (but not on the tested Ironlake), regardless of hw programming, at least for the legacy 256->8 bit luts and the 1024->10 bit precision luts. However, the type of selected - but bypassed - hw gamma table still determines output precision, ie. even an auto-bypassed legacy 256 slot 8 bit lut in XR30 fb mode still restricts the effective output precision to 8 bit, while an auto-bypassed precision lut doesn't restrict precision.
Iow. this patch is needed even with XR30 fb's for actual 10 bit precision output, even though the hw seems to sort of ignore the tested gamma tables for XR30 fb's.
--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 3 ++- drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++--------- drivers/gpu/drm/i915/intel_sprite.c | 21 ++++++++++++++++----- 4 files changed, 40 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/i915_params.c +5 -0
@@ -66,6 +66,7 @@ struct i915_params i915 __read_mostly = { .enable_dpcd_backlight = false, .enable_gvt = false, .enable_dithering = -1, + .enable_hw_color_correction = true, };module_param_named (modeset, i915.modeset, int,0400 );
@@ -262,3 +263,7 @@ MODULE_PARM_DESC(enable_gvt,module_param_named (enable_dithering, i915.enable_dithering, int,0644 );MODULE_PARM_DESC (enable_dithering,"Enable dithering (-1=auto [default], 0=force off on all outputs, 1=force on on all outputs)" ); + +module_param_named (enable_hw_color_correction, i915.enable_hw_color_correction, bool,0644 ); +MODULE_PARM_DESC (enable_hw_color_correction, +"Enable hardware color correction like gamma luts and csc (default: true)" );
drivers/gpu/drm/i915/i915_params.h +2 -1
@@ -69,7 +69,8 @@func (bool, nuclear_pageflip); \func (bool, enable_dp_mst); \func (bool, enable_dpcd_backlight); \ - func(bool, enable_gvt) +func (bool, enable_gvt); \ + func(bool, enable_hw_color_correction)#define MEMBER (T , member) T memberstruct i915_params {
drivers/gpu/drm/i915/intel_display.c +17 -9
@@ -3184,13 +3184,17 @@ static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,unsigned int rotation = plane_state->base.rotation;u32 dspcntr; - dspcntr =DISPLAY_PLANE_ENABLE |DISPPLANE_GAMMA_ENABLE ; + dspcntr =DISPLAY_PLANE_ENABLE ; + +if (i915.enable_hw_color_correction) + dspcntr |=DISPPLANE_GAMMA_ENABLE ;if (IS_G4X (dev_priv) ||IS_GEN5 (dev_priv) ||IS_GEN6 (dev_priv) ||IS_IVYBRIDGE (dev_priv)) dspcntr |=DISPPLANE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) dspcntr |=DISPPLANE_PIPE_CSC_ENABLE ;if (INTEL_GEN (dev_priv) <4 )
@@ -3514,7 +3518,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state, plane_ctl =PLANE_CTL_ENABLE ; -if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv)) { +if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv) && + i915.enable_hw_color_correction) { plane_ctl |=PLANE_CTL_PIPE_GAMMA_ENABLE | PLANE_CTL_PIPE_CSC_ENABLE |
@@ -3571,7 +3576,8 @@ static void skylake_update_primary_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |
@@ -9431,7 +9437,7 @@ static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,const struct drm_framebuffer *fb = plane_state->base.fb;return CURSOR_ENABLE | -CURSOR_GAMMA_ENABLE | + (i915.enable_hw_color_correction ?CURSOR_GAMMA_ENABLE :0 ) |CURSOR_FORMAT_ARGB |CURSOR_STRIDE (fb->pitches[0 ]); }
@@ -9544,12 +9550,14 @@ static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); -u32 cntl; +u32 cntl =0 ; - cntl =MCURSOR_GAMMA_ENABLE ; +if (i915.enable_hw_color_correction) { + cntl =MCURSOR_GAMMA_ENABLE ; -if (HAS_DDI (dev_priv)) - cntl |=CURSOR_PIPE_CSC_ENABLE ; +if (HAS_DDI (dev_priv)) + cntl |=CURSOR_PIPE_CSC_ENABLE ; + } cntl |=MCURSOR_PIPE_SELECT (crtc->pipe);
drivers/gpu/drm/i915/intel_sprite.c +16 -5
@@ -258,7 +258,8 @@ skl_update_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |
@@ -371,7 +372,10 @@ static u32 vlv_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SP_ENABLE |SP_GAMMA_ENABLE ; + sprctl =SP_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SP_GAMMA_ENABLE ;switch (fb->format->format) {case DRM_FORMAT_YUYV :
@@ -511,12 +515,16 @@ static u32 ivb_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SPRITE_ENABLE |SPRITE_GAMMA_ENABLE ; + sprctl =SPRITE_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SPRITE_GAMMA_ENABLE ;if (IS_IVYBRIDGE (dev_priv)) sprctl |=SPRITE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) sprctl |=SPRITE_PIPE_CSC_ENABLE ;switch (fb->format->format) {
@@ -651,7 +659,10 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 dvscntr; - dvscntr =DVS_ENABLE |DVS_GAMMA_ENABLE ; + dvscntr =DVS_ENABLE ; + +if (i915.enable_hw_color_correction) + dvscntr |=DVS_GAMMA_ENABLE ;if (IS_GEN6 (dev_priv)) dvscntr |=DVS_TRICKLE_FEED_DISABLE ;
Signature · 6 lines
2.13.0.rc1.294.g07d810a77f _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/i915: Add module parameter to en-/disable hw color correction.
Quoted 14 lines · Mario Kleiner
The new module parameter
enable_hw_color_correctiondefaults to true, to retain the current behaviour. If set to false, it will disable all hardware color correction, like gamma/degamma and csc.This is useful for debugging gamma table / csc precision problems, and to ensure unmodified pixel passthrough from framebuffer to outputs, e.g., for scientific applications which critically depend on perfect pixel passthrough. While i hope this switch generally won't be needed, it provides extra peace-of-mind - an "airbag" for color correction trouble.
Tested on Ironlake, IvyBridge, Haswell, Skylake.
Quoted 11 lines
One unexpected result during testing was that while this works on all tested gpu's with a 8 bpc XR24 framebuffer as primary plane, if a 10 bpc XR30 fb is active, then hw gamma tables seem to get automatically bypassed on at least the tested IvyBridge and later (but not on the tested Ironlake), regardless of hw programming, at least for the legacy 256->8 bit luts and the 1024->10 bit precision luts. However, the type of selected - but bypassed - hw gamma table still determines output precision, ie. even an auto-bypassed legacy 256 slot 8 bit lut in XR30 fb mode still restricts the effective output precision to 8 bit, while an auto-bypassed precision lut doesn't restrict precision.
Instead of a modparam I think the right thing to fix here is the driver setup. Enabling the legacy gamma table is indeed documented to restrict the pipe to 8bpc (the 2 additional bits for 10bpc are just padded).
Having driver options for "pls give me non-broken behaviour" doesn't make any sense to me.
-Daniel
Quoted 179 lines
Iow. this patch is needed even with XR30 fb's for actual 10 bit precision output, even though the hw seems to sort of ignore the tested gamma tables for XR30 fb's.
Signed-off-by Mario Kleiner <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 3 ++- drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++--------- drivers/gpu/drm/i915/intel_sprite.c | 21 ++++++++++++++++----- 4 files changed, 40 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -66,6 +66,7 @@ struct i915_params i915 __read_mostly = { .enable_dpcd_backlight = false, .enable_gvt = false, .enable_dithering = -1, + .enable_hw_color_correction = true, };module_param_named (modeset, i915.modeset, int,0400 );@@ -262,3 +263,7 @@ MODULE_PARM_DESC(enable_gvt,module_param_named (enable_dithering, i915.enable_dithering, int,0644 );MODULE_PARM_DESC (enable_dithering,"Enable dithering (-1=auto [default], 0=force off on all outputs, 1=force on on all outputs)" ); + +module_param_named (enable_hw_color_correction, i915.enable_hw_color_correction, bool,0644 ); +MODULE_PARM_DESC (enable_hw_color_correction, +"Enable hardware color correction like gamma luts and csc (default: true)" );drivers/gpu/drm/i915/i915_params.h +2
-1@@ -69,7 +69,8 @@func (bool, nuclear_pageflip); \func (bool, enable_dp_mst); \func (bool, enable_dpcd_backlight); \ - func(bool, enable_gvt) +func (bool, enable_gvt); \ + func(bool, enable_hw_color_correction)#define MEMBER (T , member) T memberstruct i915_params {drivers/gpu/drm/i915/intel_display.c +17
-9@@ -3184,13 +3184,17 @@ static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,unsigned int rotation = plane_state->base.rotation;u32 dspcntr; - dspcntr =DISPLAY_PLANE_ENABLE |DISPPLANE_GAMMA_ENABLE ; + dspcntr =DISPLAY_PLANE_ENABLE ; + +if (i915.enable_hw_color_correction) + dspcntr |=DISPPLANE_GAMMA_ENABLE ;if (IS_G4X (dev_priv) ||IS_GEN5 (dev_priv) ||IS_GEN6 (dev_priv) ||IS_IVYBRIDGE (dev_priv)) dspcntr |=DISPPLANE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) dspcntr |=DISPPLANE_PIPE_CSC_ENABLE ;if (INTEL_GEN (dev_priv) <4 )@@ -3514,7 +3518,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state, plane_ctl =PLANE_CTL_ENABLE ; -if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv)) { +if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv) && + i915.enable_hw_color_correction) { plane_ctl |=PLANE_CTL_PIPE_GAMMA_ENABLE | PLANE_CTL_PIPE_CSC_ENABLE |@@ -3571,7 +3576,8 @@ static void skylake_update_primary_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -9431,7 +9437,7 @@ static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,const struct drm_framebuffer *fb = plane_state->base.fb;return CURSOR_ENABLE | -CURSOR_GAMMA_ENABLE | + (i915.enable_hw_color_correction ?CURSOR_GAMMA_ENABLE :0 ) |CURSOR_FORMAT_ARGB |CURSOR_STRIDE (fb->pitches[0 ]); }@@ -9544,12 +9550,14 @@ static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); -u32 cntl; +u32 cntl =0 ; - cntl =MCURSOR_GAMMA_ENABLE ; +if (i915.enable_hw_color_correction) { + cntl =MCURSOR_GAMMA_ENABLE ; -if (HAS_DDI (dev_priv)) - cntl |=CURSOR_PIPE_CSC_ENABLE ; +if (HAS_DDI (dev_priv)) + cntl |=CURSOR_PIPE_CSC_ENABLE ; + } cntl |=MCURSOR_PIPE_SELECT (crtc->pipe);drivers/gpu/drm/i915/intel_sprite.c +16
-5@@ -258,7 +258,8 @@ skl_update_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -371,7 +372,10 @@ static u32 vlv_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SP_ENABLE |SP_GAMMA_ENABLE ; + sprctl =SP_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SP_GAMMA_ENABLE ;switch (fb->format->format) {case DRM_FORMAT_YUYV :@@ -511,12 +515,16 @@ static u32 ivb_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SPRITE_ENABLE |SPRITE_GAMMA_ENABLE ; + sprctl =SPRITE_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SPRITE_GAMMA_ENABLE ;if (IS_IVYBRIDGE (dev_priv)) sprctl |=SPRITE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) sprctl |=SPRITE_PIPE_CSC_ENABLE ;switch (fb->format->format) {@@ -651,7 +659,10 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 dvscntr; - dvscntr =DVS_ENABLE |DVS_GAMMA_ENABLE ; + dvscntr =DVS_ENABLE ; + +if (i915.enable_hw_color_correction) + dvscntr |=DVS_GAMMA_ENABLE ;if (IS_GEN6 (dev_priv)) dvscntr |=DVS_TRICKLE_FEED_DISABLE ;Signature · 1 line
2.13.0.rc1.294.g07d810a77f
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Add module parameter to en-/disable hw color correction.
Quoted 27 lines · Daniel Vetter
Quoted 14 lines · Mario Kleiner
The new module parameter
enable_hw_color_correctiondefaults to true, to retain the current behaviour. If set to false, it will disable all hardware color correction, like gamma/degamma and csc.This is useful for debugging gamma table / csc precision problems, and to ensure unmodified pixel passthrough from framebuffer to outputs, e.g., for scientific applications which critically depend on perfect pixel passthrough. While i hope this switch generally won't be needed, it provides extra peace-of-mind - an "airbag" for color correction trouble.
Tested on Ironlake, IvyBridge, Haswell, Skylake.
Quoted 11 lines
One unexpected result during testing was that while this works on all tested gpu's with a 8 bpc XR24 framebuffer as primary plane, if a 10 bpc XR30 fb is active, then hw gamma tables seem to get automatically bypassed on at least the tested IvyBridge and later (but not on the tested Ironlake), regardless of hw programming, at least for the legacy 256->8 bit luts and the 1024->10 bit precision luts. However, the type of selected - but bypassed - hw gamma table still determines output precision, ie. even an auto-bypassed legacy 256 slot 8 bit lut in XR30 fb mode still restricts the effective output precision to 8 bit, while an auto-bypassed precision lut doesn't restrict precision.
Quoted 8 lines
Instead of a modparam I think the right thing to fix here is the driver setup. Enabling the legacy gamma table is indeed documented to restrict the pipe to 8bpc (the 2 additional bits for 10bpc are just padded).
Having driver options for "pls give me non-broken behaviour" doesn't make any sense to me.
-Daniel
Hi Daniel,
this isn't meant as a permanent solution, but as a debugging aid, and as the equivalent of an air-bag in a car. You hope you won't need it, but it is good to have. In the past it would have been very handy for me to have a master-switch for this, debugging problems on users machines related to "pixels don't appear on the outputs as specified in the OpenGL rendering code". When looking over the docs for color correction i just realized the hardware has an easy way to disable this part of the pipeline, so i thought this could make debugging so much easier - at least for me. I had the impression that many current i915 module parameters are of this nature.
The debug switch also provides a temporary workaround on production systems if a problem is related to color correction, not meant as a permanent solution. Many of my users are challenged already by the fact that Linux is not macOS, and editing a config file or installing a prebuilt kernel from a .dpkg is already borderline rocket science for them, that's why those module parameters would be nice to have.
My actual plan is to implement true 10 bit -> 12 bit gamma table support, hopefully still for the 4.15 kernel.
I have experimental patches for using the precision luts with 1024 slots and 10 bit output width, ie. 10 bit in -> 10 bit out on Ironlake and later. I'll send those out in their hacky state just for reference.
However the better plan i have in mind is to extend the code so that if (we are in single-lut mode (DEGAMMA_LUT == 0)) AND (the userspace provided input lut is monotonically increasing) we switch from the dual 512 slot 10 bit luts to the 512 slot 12 bit lut. This would also be applicable to the 256 slot legacy gamma tables, which are always single-lut and can be upsampled from 256 slots to 512 slots.
The reason is that the dual-512 slot luts are not good enough to handle a 10 bit framebuffer. As far as i read the PRMs, a 10 bit fb value would simply get truncated to 9 bits to select one of the 512 slots, so we would lose 1 bit of precision, which makes 10 bit framebuffers mostly pointless, at least for scientific/medical/HDR applications.
The 512 slot 12 bit lut is perfect for such applications, as the PRMs say the hw will linearly interpolate between the nearest neighbor slots of the 512 slot lut for the given fb input value -> works with 10 bit fb's. Would also work with those 16 bit half-float fb format that is supported by current hw but currently unused - but could be handy for future HDR applications. Also 12 bit output precision is nice for better gamma correction on true 10-12 bit displays over DP/HDMI deep color.
I will try to work on this within the next 1-2 weeks.
Now here's a catch i found while testing with the 1024 slot 10 bit luts, which i found very surprising:
- If i have a standard XR24 framebuffer on the primary plane, the 1024 slot/10 bit lut's work exactly as expected, as verified on a XR24 fb via photometer measurements and tweaking the values in the gamma tables -- and the "force dithering on" module parameter patch, as i don't have a true 10 bit panel around atm.
- As soon as a XR30 fb is active (X11 DefaultDepth 30, or Weston in gbm-format=xrgb2101010 mode), the fb pixels do reach the outputs with 10 bit precision without any truncation, as expected, but the lut is *bypassed*! Loading arbitrary values into the gamma luts has no effect at all, unless switching to a XR24 plane. I don't know if some non-obvious (to me) setup is required for anything > XR24, or if something is going wrong with the hw. This on all tested gen's since Ironlake.
Haven't tested the 512 slot 12 bit wide lut yet, but that's the next step.
-mario
Quoted 174 lines
Quoted 174 lines
Iow. this patch is needed even with XR30 fb's for actual 10 bit precision output, even though the hw seems to sort of ignore the tested gamma tables for XR30 fb's.
Signed-off-by Mario Kleiner <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 3 ++- drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++--------- drivers/gpu/drm/i915/intel_sprite.c | 21 ++++++++++++++++----- 4 files changed, 40 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -66,6 +66,7 @@ struct i915_params i915 __read_mostly = { .enable_dpcd_backlight = false, .enable_gvt = false, .enable_dithering = -1, + .enable_hw_color_correction = true, };module_param_named (modeset, i915.modeset, int,0400 );@@ -262,3 +263,7 @@ MODULE_PARM_DESC(enable_gvt,module_param_named (enable_dithering, i915.enable_dithering, int,0644 );MODULE_PARM_DESC (enable_dithering,"Enable dithering (-1=auto [default], 0=force off on all outputs, 1=force on on all outputs)" ); + +module_param_named (enable_hw_color_correction, i915.enable_hw_color_correction, bool,0644 ); +MODULE_PARM_DESC (enable_hw_color_correction, +"Enable hardware color correction like gamma luts and csc (default: true)" );drivers/gpu/drm/i915/i915_params.h +2
-1@@ -69,7 +69,8 @@func (bool, nuclear_pageflip); \func (bool, enable_dp_mst); \func (bool, enable_dpcd_backlight); \ - func(bool, enable_gvt) +func (bool, enable_gvt); \ + func(bool, enable_hw_color_correction)#define MEMBER (T , member) T memberstruct i915_params {drivers/gpu/drm/i915/intel_display.c +17
-9@@ -3184,13 +3184,17 @@ static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,unsigned int rotation = plane_state->base.rotation;u32 dspcntr; - dspcntr =DISPLAY_PLANE_ENABLE |DISPPLANE_GAMMA_ENABLE ; + dspcntr =DISPLAY_PLANE_ENABLE ; + +if (i915.enable_hw_color_correction) + dspcntr |=DISPPLANE_GAMMA_ENABLE ;if (IS_G4X (dev_priv) ||IS_GEN5 (dev_priv) ||IS_GEN6 (dev_priv) ||IS_IVYBRIDGE (dev_priv)) dspcntr |=DISPPLANE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) dspcntr |=DISPPLANE_PIPE_CSC_ENABLE ;if (INTEL_GEN (dev_priv) <4 )@@ -3514,7 +3518,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state, plane_ctl =PLANE_CTL_ENABLE ; -if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv)) { +if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv) && + i915.enable_hw_color_correction) { plane_ctl |=PLANE_CTL_PIPE_GAMMA_ENABLE | PLANE_CTL_PIPE_CSC_ENABLE |@@ -3571,7 +3576,8 @@ static void skylake_update_primary_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -9431,7 +9437,7 @@ static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,const struct drm_framebuffer *fb = plane_state->base.fb;return CURSOR_ENABLE | -CURSOR_GAMMA_ENABLE | + (i915.enable_hw_color_correction ?CURSOR_GAMMA_ENABLE :0 ) |CURSOR_FORMAT_ARGB |CURSOR_STRIDE (fb->pitches[0 ]); }@@ -9544,12 +9550,14 @@ static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); -u32 cntl; +u32 cntl =0 ; - cntl =MCURSOR_GAMMA_ENABLE ; +if (i915.enable_hw_color_correction) { + cntl =MCURSOR_GAMMA_ENABLE ; -if (HAS_DDI (dev_priv)) - cntl |=CURSOR_PIPE_CSC_ENABLE ; +if (HAS_DDI (dev_priv)) + cntl |=CURSOR_PIPE_CSC_ENABLE ; + } cntl |=MCURSOR_PIPE_SELECT (crtc->pipe);drivers/gpu/drm/i915/intel_sprite.c +16
-5@@ -258,7 +258,8 @@ skl_update_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -371,7 +372,10 @@ static u32 vlv_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SP_ENABLE |SP_GAMMA_ENABLE ; + sprctl =SP_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SP_GAMMA_ENABLE ;switch (fb->format->format) {case DRM_FORMAT_YUYV :@@ -511,12 +515,16 @@ static u32 ivb_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SPRITE_ENABLE |SPRITE_GAMMA_ENABLE ; + sprctl =SPRITE_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SPRITE_GAMMA_ENABLE ;if (IS_IVYBRIDGE (dev_priv)) sprctl |=SPRITE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) sprctl |=SPRITE_PIPE_CSC_ENABLE ;switch (fb->format->format) {@@ -651,7 +659,10 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 dvscntr; - dvscntr =DVS_ENABLE |DVS_GAMMA_ENABLE ; + dvscntr =DVS_ENABLE ; + +if (i915.enable_hw_color_correction) + dvscntr |=DVS_GAMMA_ENABLE ;
Quoted 6 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_sprite.c +0
-0if (IS_GEN6 (dev_priv)) dvscntr |=DVS_TRICKLE_FEED_DISABLE ;Signature · 1 line
2.13.0.rc1.294.g07d810a77f
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/i915: Add module parameter to en-/disable hw color correction.
Quoted 39 lines · Mario Kleiner
Quoted 27 lines · Daniel Vetter
Quoted 14 lines · Mario Kleiner
The new module parameter
enable_hw_color_correctiondefaults to true, to retain the current behaviour. If set to false, it will disable all hardware color correction, like gamma/degamma and csc.This is useful for debugging gamma table / csc precision problems, and to ensure unmodified pixel passthrough from framebuffer to outputs, e.g., for scientific applications which critically depend on perfect pixel passthrough. While i hope this switch generally won't be needed, it provides extra peace-of-mind - an "airbag" for color correction trouble.
Tested on Ironlake, IvyBridge, Haswell, Skylake.
Quoted 11 lines
One unexpected result during testing was that while this works on all tested gpu's with a 8 bpc XR24 framebuffer as primary plane, if a 10 bpc XR30 fb is active, then hw gamma tables seem to get automatically bypassed on at least the tested IvyBridge and later (but not on the tested Ironlake), regardless of hw programming, at least for the legacy 256->8 bit luts and the 1024->10 bit precision luts. However, the type of selected - but bypassed - hw gamma table still determines output precision, ie. even an auto-bypassed legacy 256 slot 8 bit lut in XR30 fb mode still restricts the effective output precision to 8 bit, while an auto-bypassed precision lut doesn't restrict precision.
Quoted 8 lines
Instead of a modparam I think the right thing to fix here is the driver setup. Enabling the legacy gamma table is indeed documented to restrict the pipe to 8bpc (the 2 additional bits for 10bpc are just padded).
Having driver options for "pls give me non-broken behaviour" doesn't make any sense to me.
-DanielHi Daniel,
Quoted 9 lines
this isn't meant as a permanent solution, but as a debugging aid, and as the equivalent of an air-bag in a car. You hope you won't need it, but it is good to have. In the past it would have been very handy for me to have a master-switch for this, debugging problems on users machines related to "pixels don't appear on the outputs as specified in the OpenGL rendering code". When looking over the docs for color correction i just realized the hardware has an easy way to disable this part of the pipeline, so i thought this could make debugging so much easier - at least for me. I had the impression that many current i915 module parameters are of this nature.
We really don't like the proliferation of module debug options. The only time we are unhappily ok with them is if the hw just doesn't work as documented, or we have some other issue that just doesn't make much sense and results in random issues. PSR not working, rc6 not working, that kind of stuff.
But this here is just a case of "not yet fully implemented", there's really no need for users out there in the field to be able to change stuff without changing code to help us diagnos an issue we don't yet understand. The only one who needs this right now is you, for helping develop proper 10+bit gamma support, but I don't see how that would be useful to anyone else.
On the issue itself: What I mean is that when there's no gamma table we should properly bypass all the lut stuff automatically, to preserve the full bits. Kinda as an interim improvement for your use-case, since it sounds very much like you want both higher bit depth and gamma tables.
Quoted 46 lines
The debug switch also provides a temporary workaround on production systems if a problem is related to color correction, not meant as a permanent solution. Many of my users are challenged already by the fact that Linux is not macOS, and editing a config file or installing a prebuilt kernel from a .dpkg is already borderline rocket science for them, that's why those module parameters would be nice to have.
My actual plan is to implement true 10 bit -> 12 bit gamma table support, hopefully still for the 4.15 kernel.
I have experimental patches for using the precision luts with 1024 slots and 10 bit output width, ie. 10 bit in -> 10 bit out on Ironlake and later. I'll send those out in their hacky state just for reference.
However the better plan i have in mind is to extend the code so that if (we are in single-lut mode (
DEGAMMA_LUT== 0)) AND (the userspace provided input lut is monotonically increasing) we switch from the dual 512 slot 10 bit luts to the 512 slot 12 bit lut. This would also be applicable to the 256 slot legacy gamma tables, which are always single-lut and can be upsampled from 256 slots to 512 slots.The reason is that the dual-512 slot luts are not good enough to handle a 10 bit framebuffer. As far as i read the PRMs, a 10 bit fb value would simply get truncated to 9 bits to select one of the 512 slots, so we would lose 1 bit of precision, which makes 10 bit framebuffers mostly pointless, at least for scientific/medical/HDR applications.
The 512 slot 12 bit lut is perfect for such applications, as the PRMs say the hw will linearly interpolate between the nearest neighbor slots of the 512 slot lut for the given fb input value -> works with 10 bit fb's. Would also work with those 16 bit half-float fb format that is supported by current hw but currently unused - but could be handy for future HDR applications. Also 12 bit output precision is nice for better gamma correction on true 10-12 bit displays over DP/HDMI deep color.
I will try to work on this within the next 1-2 weeks.
Now here's a catch i found while testing with the 1024 slot 10 bit luts, which i found very surprising:
- If i have a standard XR24 framebuffer on the primary plane, the 1024 slot/10 bit lut's work exactly as expected, as verified on a XR24 fb via photometer measurements and tweaking the values in the gamma tables -- and the "force dithering on" module parameter patch, as i don't have a true 10 bit panel around atm.
Quoted 7 lines
- As soon as a XR30 fb is active (X11 DefaultDepth 30, or Weston in gbm-format=xrgb2101010 mode), the fb pixels do reach the outputs with 10 bit precision without any truncation, as expected, but the lut is *bypassed*! Loading arbitrary values into the gamma luts has no effect at all, unless switching to a XR24 plane. I don't know if some non-obvious (to me) setup is required for anything > XR24, or if something is going wrong with the hw. This on all tested gen's since Ironlake.
I haven't checked, but iirc the Bspec wording for this stuff is very funny, and explains which modes work with which bit depths. I thought it only depends upon the pipe bit depth, not the primary plane colors, but maybe I'm mistaken on that one.
You probably want to have all the public Bespec for ilk-skl at hand, sometimes something gets dropped by accident in the scrubbing that should be retained.
Another request for this: Please add new testcases to the kms_color_mgmt igt testcase for all the new cases you're adding, especially once we start upscaling LUTs.
-Daniel
Quoted 159 lines
Haven't tested the 512 slot 12 bit wide lut yet, but that's the next step.
-mario
Quoted 155 lines
Quoted 154 lines
Iow. this patch is needed even with XR30 fb's for actual 10 bit precision output, even though the hw seems to sort of ignore the tested gamma tables for XR30 fb's.
Signed-off-by Mario Kleiner <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 3 ++- drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++--------- drivers/gpu/drm/i915/intel_sprite.c | 21 ++++++++++++++++----- 4 files changed, 40 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -66,6 +66,7 @@ struct i915_params i915 __read_mostly = { .enable_dpcd_backlight = false, .enable_gvt = false, .enable_dithering = -1, + .enable_hw_color_correction = true, };module_param_named (modeset, i915.modeset, int,0400 );@@ -262,3 +263,7 @@ MODULE_PARM_DESC(enable_gvt,module_param_named (enable_dithering, i915.enable_dithering, int,0644 );MODULE_PARM_DESC (enable_dithering,"Enable dithering (-1=auto [default], 0=force off on all outputs, 1=force on on all outputs)" ); + +module_param_named (enable_hw_color_correction, i915.enable_hw_color_correction, bool,0644 ); +MODULE_PARM_DESC (enable_hw_color_correction, +"Enable hardware color correction like gamma luts and csc (default: true)" );drivers/gpu/drm/i915/i915_params.h +2
-1@@ -69,7 +69,8 @@func (bool, nuclear_pageflip); \func (bool, enable_dp_mst); \func (bool, enable_dpcd_backlight); \ - func(bool, enable_gvt) +func (bool, enable_gvt); \ + func(bool, enable_hw_color_correction)#define MEMBER (T , member) T memberstruct i915_params {drivers/gpu/drm/i915/intel_display.c +17
-9@@ -3184,13 +3184,17 @@ static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,unsigned int rotation = plane_state->base.rotation;u32 dspcntr; - dspcntr =DISPLAY_PLANE_ENABLE |DISPPLANE_GAMMA_ENABLE ; + dspcntr =DISPLAY_PLANE_ENABLE ; + +if (i915.enable_hw_color_correction) + dspcntr |=DISPPLANE_GAMMA_ENABLE ;if (IS_G4X (dev_priv) ||IS_GEN5 (dev_priv) ||IS_GEN6 (dev_priv) ||IS_IVYBRIDGE (dev_priv)) dspcntr |=DISPPLANE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) dspcntr |=DISPPLANE_PIPE_CSC_ENABLE ;if (INTEL_GEN (dev_priv) <4 )@@ -3514,7 +3518,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state, plane_ctl =PLANE_CTL_ENABLE ; -if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv)) { +if (!IS_GEMINILAKE (dev_priv) && !IS_CANNONLAKE (dev_priv) && + i915.enable_hw_color_correction) { plane_ctl |=PLANE_CTL_PIPE_GAMMA_ENABLE | PLANE_CTL_PIPE_CSC_ENABLE |@@ -3571,7 +3576,8 @@ static void skylake_update_primary_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -9431,7 +9437,7 @@ static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,const struct drm_framebuffer *fb = plane_state->base.fb;return CURSOR_ENABLE | -CURSOR_GAMMA_ENABLE | + (i915.enable_hw_color_correction ?CURSOR_GAMMA_ENABLE :0 ) |CURSOR_FORMAT_ARGB |CURSOR_STRIDE (fb->pitches[0 ]); }@@ -9544,12 +9550,14 @@ static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,struct drm_i915_private *dev_priv =to_i915 (plane_state->base.plane->dev);struct intel_crtc *crtc =to_intel_crtc (crtc_state->base.crtc); -u32 cntl; +u32 cntl =0 ; - cntl =MCURSOR_GAMMA_ENABLE ; +if (i915.enable_hw_color_correction) { + cntl =MCURSOR_GAMMA_ENABLE ; -if (HAS_DDI (dev_priv)) - cntl |=CURSOR_PIPE_CSC_ENABLE ; +if (HAS_DDI (dev_priv)) + cntl |=CURSOR_PIPE_CSC_ENABLE ; + } cntl |=MCURSOR_PIPE_SELECT (crtc->pipe);drivers/gpu/drm/i915/intel_sprite.c +16
-5@@ -258,7 +258,8 @@ skl_update_plane(struct intel_plane *plane,spin_lock_irqsave (&dev_priv->uncore.lock, irqflags); -if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { +if ((IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) && + i915.enable_hw_color_correction) { I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id), PLANE_COLOR_PIPE_GAMMA_ENABLE | PLANE_COLOR_PIPE_CSC_ENABLE |@@ -371,7 +372,10 @@ static u32 vlv_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SP_ENABLE |SP_GAMMA_ENABLE ; + sprctl =SP_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SP_GAMMA_ENABLE ;switch (fb->format->format) {case DRM_FORMAT_YUYV :@@ -511,12 +515,16 @@ static u32 ivb_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 sprctl; - sprctl =SPRITE_ENABLE |SPRITE_GAMMA_ENABLE ; + sprctl =SPRITE_ENABLE ; + +if (i915.enable_hw_color_correction) + sprctl |=SPRITE_GAMMA_ENABLE ;if (IS_IVYBRIDGE (dev_priv)) sprctl |=SPRITE_TRICKLE_FEED_DISABLE ; -if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) +if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + i915.enable_hw_color_correction) sprctl |=SPRITE_PIPE_CSC_ENABLE ;switch (fb->format->format) {@@ -651,7 +659,10 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 dvscntr; - dvscntr =DVS_ENABLE |DVS_GAMMA_ENABLE ; + dvscntr =DVS_ENABLE ; + +if (i915.enable_hw_color_correction) + dvscntr |=DVS_GAMMA_ENABLE ;if (IS_GEN6 (dev_priv)) dvscntr |=DVS_TRICKLE_FEED_DISABLE ;Signature · 1 line
2.13.0.rc1.294.g07d810a77f
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Add module parameter to force en-/disable dithering.
In reply to Mario Kleiner== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Add module parameter to force en-/disable dithering.
URL : https://patchwork.freedesktop.org/series/30428/
State : success
== Summary ==
Series 30428v1 series starting with [1/2] drm/i915: Add module parameter to force en-/disable dithering.
https://patchwork.freedesktop.org/api/1.0/series/30428/revisions/1/mbox/
Test pm_rpm:
Subgroup basic-rte:
pass -> DMESG-WARN (fi-cfl-s) fdo#102294fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:451s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:460s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:379s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:537s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:267s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:510s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:506s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:495s fi-cfl-s total:289 pass:222 dwarn:35 dfail:0 fail:0 skip:32 time:550s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:427s fi-glk-2a total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:597s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:430s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:414s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:445s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:500s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:465s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:499s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:585s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:587s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:553s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:464s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:525s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:507s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:458s fi-skl-x1585l total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:489s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:577s fi-snb-2600 total:289 pass:248 dwarn:0 dfail:0 fail:2 skip:39 time:426s
9adc9e93d6243c82bcefd175c2d11770802de194 drm-tip: 2017y-09m-15d-11h-44m-46s UTC integration manifest aff8e23f84b0 drm/i915: Add module parameter to en-/disable hw color correction. a6b79d2f7735 drm/i915: Add module parameter to force en-/disable dithering.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5713/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Add module parameter to force en-/disable dithering.
In reply to Mario Kleiner== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Add module parameter to force en-/disable dithering.
URL : https://patchwork.freedesktop.org/series/30428/
State : success
== Summary ==
Test perf:
Subgroup polling:
pass -> FAIL (shard-hsw) fdo#102252 +1fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-hsw total:2313 pass:1245 dwarn:0 dfail:0 fail:13 skip:1055 time:9402s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5713/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 17 lines · Mario Kleiner
Hi,
so these two patches add i915 module parameters to globally override how the driver handles dithering and gamma/csc conversion.
They serve two purposes: First as debug aid and "airbag" for working around potential precision problems in getting pixels from rendering to the display outputs. This mostly for applications that critically depend on getting pixels untampered from the fb to the outputs, e.g., scientific neuro-science/vision research/medical applications. Having the ability to bypass parts of the pipeline can help a lot in debugging such problems on remote user machines, and to allow such users to work around the problems until proper fixes are made. I expect this to become especially useful when dealing with all the Wayland compositor implementations, which so far don't have a standardized application/user controllable equivalent to RandR protocol / xrandr tools.
Quoted 8 lines
The second, short-term purpose is to enable true 10 bit output from rendering, so people with urgent 10 bit precision needs can benefit from the Mesa patches i started working on for i965 (rev 1 on the mailing-list, rev 2 to come soon).
I realize the merge window for Linux 4.14 is almost over, but wanted to ask if it would be possible to slip these patches into 4.14 if they aren't considered too intrusive?
For future reference, drm features for an upcoming merge window need to be merged upstream by about -rc5, i.e. several weeks before the merge window even opens.
As to the patches, we're wondering about ways to axe existing module parameters, so we'd prefer not adding new ones. You mention connector properties; common properties across drivers sounds like the way to go.
BR,
Jani.
Quoted 38 lines
These are tested on Ironlake, Ivybridge, Haswell and Skylake, also with a photometer to see what actually comes out of the display for different settings.
The bigger plan is to enhance the gamma table support, so we could also use > 8 bit precision gamma tables on Ironlake and later, both for the legacy gamma ioctl and the new color mgmt. method. I do have proof of concept patches for using the 1024->10 precision luts on Ironlake and later. Tweaking the gamma tables i upload via RandR and measuring with photometer showed my poc patches work. However, as described in the 2nd patch, at least the tested legacy luts and 1024->10 precision luts seem to get mostly ignored/bypassed in the hw when a XR30 fb is attached to the primary plane. Not sure if some setup is missing, or if this is some hardware quirk? Couldn't find anything in the PRM's so far.
What i'd actually like to implement for Ironlake+ instead of the 1024->10 bit luts is this:
If in dual-gamma lut mode, or if the input gamma table is not monotonically increasing, do what is done now (legacy luts for legacy gamma ioctl, split 512->10 big luts for new path).
If only a single gamma lut is requested (
DEGAMMA_LUT== 0), and the provided input lut is monotonically increasing, switch to the linearly interpolated 512->12 bit lut instead, which exists on Ironlake+. Also for the legacy gamma ioctl, so existing apps can benefit from the higher precision. This would enable > 8 bit framebuffers to be output properly and with high quality gamma correction.Thanks,
-mario_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx