Skip to contentSkip to conversation

drm/i915: always update ELD connector type after get modes

PATCH In review Jani Nikula 3 participants 7 messages Sep 19, 2017 – Sep 20, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: always update ELD connector type after get modes

drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP.

Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable().

Credits to Joseph Nuzman <[email protected]> for figuring this out.

Cc Ville Syrjälä <[email protected]>
Cc Joseph Nuzman <[email protected]>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583

---

We'll still need to cache and fix the av sync delay as well, but we need adjusted mode for that.

---
 drivers/gpu/drm/i915/intel_audio.c |  5 -----
 drivers/gpu/drm/i915/intel_modes.c | 17 +++++++++++++++++
 2 files changed, 17 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_audio.c +0 -5
index d805b6e6fe71..27743be5b768 100644
@@ -606,11 +606,6 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,
 			 connector->encoder->base.id,
 			 connector->encoder->name);
 
-	/* ELD Conn_Type */
-	connector->eld[5] &= ~(3 << 2);
-	if (intel_crtc_has_dp_encoder(crtc_state))
-		connector->eld[5] |= (1 << 2);
-
 	connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
 
 	if (dev_priv->display.audio_codec_enable)
drivers/gpu/drm/i915/intel_modes.c +17 -0
index 951e834dd274..28a778b785ac 100644
@@ -30,6 +30,21 @@
 #include "intel_drv.h"
 #include "i915_drv.h"
 
+static void intel_connector_update_eld_conn_type(struct drm_connector *connector)
+{
+	u8 conn_type;
+
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		conn_type = DRM_ELD_CONN_TYPE_DP;
+	} else {
+		conn_type = DRM_ELD_CONN_TYPE_HDMI;
+	}
+
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] &= ~DRM_ELD_CONN_TYPE_MASK;
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= conn_type;
+}
+
 /**
  * intel_connector_update_modes - update connector from edid
  * @connector: DRM connector device to use
@@ -44,6 +59,8 @@ int intel_connector_update_modes(struct drm_connector *connector,
 	ret = drm_add_edid_modes(connector, edid);
 	drm_edid_to_eld(connector, edid);
 
+	intel_connector_update_eld_conn_type(connector);
+
 	return ret;
 }
 
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 11 lines · Jani Nikula

drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP.

Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable().

Quoted 7 lines

Credits to Joseph Nuzman <[email protected]> for figuring this out.

Cc Ville Syrjälä <[email protected]>
Cc Joseph Nuzman <[email protected]>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583

Probably

about as far back as it applies?

Quoted 60 lines

---

We'll still need to cache and fix the av sync delay as well, but we need adjusted mode for that.

---
 drivers/gpu/drm/i915/intel_audio.c |  5 -----
 drivers/gpu/drm/i915/intel_modes.c | 17 +++++++++++++++++
 2 files changed, 17 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_audio.c +0 -5
index d805b6e6fe71..27743be5b768 100644
@@ -606,11 +606,6 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,
 			 connector->encoder->base.id,
 			 connector->encoder->name);
 
-	/* ELD Conn_Type */
-	connector->eld[5] &= ~(3 << 2);
-	if (intel_crtc_has_dp_encoder(crtc_state))
-		connector->eld[5] |= (1 << 2);
-
 	connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
 
 	if (dev_priv->display.audio_codec_enable)
drivers/gpu/drm/i915/intel_modes.c +17 -0
index 951e834dd274..28a778b785ac 100644
@@ -30,6 +30,21 @@
 #include "intel_drv.h"
 #include "i915_drv.h"
 
+static void intel_connector_update_eld_conn_type(struct drm_connector *connector)
+{
+	u8 conn_type;
+
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		conn_type = DRM_ELD_CONN_TYPE_DP;
+	} else {
+		conn_type = DRM_ELD_CONN_TYPE_HDMI;
+	}
+
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] &= ~DRM_ELD_CONN_TYPE_MASK;
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= conn_type;
+}
+
 /**
  * intel_connector_update_modes - update connector from edid
  * @connector: DRM connector device to use
@@ -44,6 +59,8 @@ int intel_connector_update_modes(struct drm_connector *connector,
 	ret = drm_add_edid_modes(connector, edid);
 	drm_edid_to_eld(connector, edid);
 
+	intel_connector_update_eld_conn_type(connector);
+
 	return ret;
 }
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#2 lore raw
In reply to Jani Nikula
Quoted 56 lines · Jani Nikula

drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP.

Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable().

Credits to Joseph Nuzman <[email protected]> for figuring this out.

Cc Ville Syrjälä <[email protected]>
Cc Joseph Nuzman <[email protected]>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583

---

We'll still need to cache and fix the av sync delay as well, but we need adjusted mode for that.

---
 drivers/gpu/drm/i915/intel_audio.c |  5 -----
 drivers/gpu/drm/i915/intel_modes.c | 17 +++++++++++++++++
 2 files changed, 17 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_audio.c +0 -5
index d805b6e6fe71..27743be5b768 100644
@@ -606,11 +606,6 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,
 			 connector->encoder->base.id,
 			 connector->encoder->name);
 
-	/* ELD Conn_Type */
-	connector->eld[5] &= ~(3 << 2);
-	if (intel_crtc_has_dp_encoder(crtc_state))
-		connector->eld[5] |= (1 << 2);
-
 	connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
 
 	if (dev_priv->display.audio_codec_enable)
drivers/gpu/drm/i915/intel_modes.c +4 -0
index 951e834dd274..28a778b785ac 100644
@@ -30,6 +30,21 @@
 #include "intel_drv.h"
 #include "i915_drv.h"
 
+static void intel_connector_update_eld_conn_type(struct drm_connector *connector)
+{
+	u8 conn_type;
+

drivers/gpu/drm/i915/intel_modes.c line 46

Quoted 10 lines
drivers/gpu/drm/i915/intel_modes.c +10 -0
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		conn_type = DRM_ELD_CONN_TYPE_DP;
+	} else {
+		conn_type = DRM_ELD_CONN_TYPE_HDMI;
+	}
+
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] &= ~DRM_ELD_CONN_TYPE_MASK;
+	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= conn_type;
+}

Or should we just smash this into drm_edid_to_eld() ? Would require a quick review of other drivers I suppose.

It's a step forward so

And I guess we should still do something about the av sync delay always getting clobbered by get_modes()?

Quoted 15 lines
drivers/gpu/drm/i915/intel_modes.c +3 -0
+
 /**
  * intel_connector_update_modes - update connector from edid
  * @connector: DRM connector device to use
@@ -44,6 +59,8 @@ int intel_connector_update_modes(struct drm_connector *connector,
 	ret = drm_add_edid_modes(connector, edid);
 	drm_edid_to_eld(connector, edid);
 
+	intel_connector_update_eld_conn_type(connector);
+
 	return ret;
 }
 
Signature · 1 line
2.11.0
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

✗ Fi.CI.BAT: warning for drm/i915: always update ELD connector type after get modes

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915: always update ELD connector type after get modes
URL : https://patchwork.freedesktop.org/series/30602/
State : warning

== Summary ==

Series 30602v1 drm/i915: always update ELD connector type after get modes
https://patchwork.freedesktop.org/api/1.0/series/30602/revisions/1/mbox/

Test kms_addfb_basic:

        Subgroup clobberred-modifier:
                pass       -> DMESG-WARN (fi-kbl-7500u)
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-legacy:
                pass       -> FAIL       (fi-snb-2600) fdo#100215
Test kms_frontbuffer_tracking:
        Subgroup basic:
                dmesg-warn -> PASS       (fi-kbl-7500u)
Test kms_pipe_crc_basic:
        Subgroup hang-read-crc-pipe-b:
                incomplete -> DMESG-WARN (fi-cfl-s) fdo#102294

fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:438s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:473s
fi-blb-e6850     total:289  pass:224  dwarn:1   dfail:0   fail:0   skip:64  time:417s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:513s
fi-bwr-2160      total:289  pass:184  dwarn:0   dfail:0   fail:0   skip:105 time:278s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:503s
fi-byt-j1900     total:289  pass:254  dwarn:1   dfail:0   fail:0   skip:34  time:491s
fi-byt-n2820     total:289  pass:250  dwarn:1   dfail:0   fail:0   skip:38  time:497s
fi-cfl-s         total:289  pass:223  dwarn:34  dfail:0   fail:0   skip:32  time:540s
fi-elk-e7500     total:289  pass:230  dwarn:0   dfail:0   fail:0   skip:59  time:421s
fi-glk-1         total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:564s
fi-hsw-4770      total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:422s
fi-hsw-4770r     total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:405s
fi-ilk-650       total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:425s
fi-ivb-3520m     total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:490s
fi-ivb-3770      total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:461s
fi-kbl-7500u     total:245  pass:222  dwarn:2   dfail:0   fail:0   skip:20 
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:582s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:587s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:445s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:750s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:487s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:471s
fi-snb-2520m     total:289  pass:251  dwarn:0   dfail:0   fail:0   skip:38  time:563s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:1   skip:39  time:415s

fi-pnv-d510 failed to connect after reboot

bf6ecf6d25c1c45e576643b7d7a65e8b1e6b4f01 drm-tip: 2017y-09m-19d-17h-23m-04s UTC integration manifest 690262d1dc43 drm/i915: always update ELD connector type after get modes

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5751/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

✗ Fi.CI.BAT: failure for drm/i915: always update ELD connector type after get modes

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915: always update ELD connector type after get modes
URL : https://patchwork.freedesktop.org/series/30602/
State : failure

== Summary ==

Series 30602v1 drm/i915: always update ELD connector type after get modes
https://patchwork.freedesktop.org/api/1.0/series/30602/revisions/1/mbox/

Test chamelium:

        Subgroup hdmi-hpd-fast:
                fail       -> SKIP       (fi-kbl-7500u) fdo#102672
Test kms_busy:
        Subgroup basic-flip-a:
                pass       -> INCOMPLETE (fi-bxt-j4205)
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-atomic:
                pass       -> FAIL       (fi-snb-2600) fdo#100215 +1
Test pm_rpm:
        Subgroup basic-rte:
                pass       -> DMESG-WARN (fi-cfl-s) fdo#102294

fdo#102672 https://bugs.freedesktop.org/show_bug.cgi?id=102672
fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:443s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:473s
fi-blb-e6850     total:289  pass:224  dwarn:1   dfail:0   fail:0   skip:64  time:420s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:527s
fi-bwr-2160      total:289  pass:184  dwarn:0   dfail:0   fail:0   skip:105 time:279s
fi-bxt-j4205     total:206  pass:184  dwarn:0   dfail:0   fail:0   skip:21 
fi-byt-j1900     total:289  pass:254  dwarn:1   dfail:0   fail:0   skip:34  time:498s
fi-byt-n2820     total:289  pass:250  dwarn:1   dfail:0   fail:0   skip:38  time:498s
fi-cfl-s         total:289  pass:222  dwarn:35  dfail:0   fail:0   skip:32  time:550s
fi-elk-e7500     total:289  pass:230  dwarn:0   dfail:0   fail:0   skip:59  time:422s
fi-glk-1         total:289  pass:259  dwarn:1   dfail:0   fail:0   skip:29  time:570s
fi-hsw-4770      total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:431s
fi-hsw-4770r     total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:408s
fi-ilk-650       total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:432s
fi-ivb-3520m     total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:484s
fi-ivb-3770      total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:470s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:468s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:580s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:590s
fi-pnv-d510      total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:546s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:467s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:753s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:490s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:475s
fi-snb-2520m     total:289  pass:251  dwarn:0   dfail:0   fail:0   skip:38  time:570s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:1   skip:39  time:419s

85e28edde5bfb81a40cc95ce27cd84230114d6f0 drm-tip: 2017y-09m-19d-23h-07m-57s UTC integration manifest e62dbf899745 drm/i915: always update ELD connector type after get modes

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5761/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✓ Fi.CI.BAT: success for drm/i915: always update ELD connector type after get modes

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915: always update ELD connector type after get modes
URL : https://patchwork.freedesktop.org/series/30602/
State : success

== Summary ==

Series 30602v1 drm/i915: always update ELD connector type after get modes
https://patchwork.freedesktop.org/api/1.0/series/30602/revisions/1/mbox/

Test chamelium:

        Subgroup hdmi-hpd-fast:
                fail       -> SKIP       (fi-kbl-7500u) fdo#102672
Test pm_rpm:
        Subgroup basic-rte:
                pass       -> DMESG-WARN (fi-cfl-s) fdo#102294
Test drv_module_reload:
        Subgroup basic-reload:
                dmesg-warn -> PASS       (fi-glk-1) fdo#102777

fdo#102672 https://bugs.freedesktop.org/show_bug.cgi?id=102672
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
fdo#102777 https://bugs.freedesktop.org/show_bug.cgi?id=102777

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:437s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:471s
fi-blb-e6850     total:289  pass:224  dwarn:1   dfail:0   fail:0   skip:64  time:473s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:507s
fi-bwr-2160      total:289  pass:184  dwarn:0   dfail:0   fail:0   skip:105 time:277s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:502s
fi-byt-j1900     total:289  pass:254  dwarn:1   dfail:0   fail:0   skip:34  time:494s
fi-byt-n2820     total:289  pass:250  dwarn:1   dfail:0   fail:0   skip:38  time:489s
fi-cfl-s         total:289  pass:222  dwarn:35  dfail:0   fail:0   skip:32  time:546s
fi-elk-e7500     total:289  pass:230  dwarn:0   dfail:0   fail:0   skip:59  time:417s
fi-glk-1         total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:569s
fi-hsw-4770      total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:426s
fi-hsw-4770r     total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:404s
fi-ilk-650       total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:422s
fi-ivb-3520m     total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:493s
fi-ivb-3770      total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:464s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:473s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:577s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:595s
fi-pnv-d510      total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:541s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:457s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:751s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:487s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:473s
fi-snb-2520m     total:289  pass:251  dwarn:0   dfail:0   fail:0   skip:38  time:572s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:1   skip:39  time:421s

85e28edde5bfb81a40cc95ce27cd84230114d6f0 drm-tip: 2017y-09m-19d-23h-07m-57s UTC integration manifest 3f40ff798dc8 drm/i915: always update ELD connector type after get modes

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5762/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.IGT: success for drm/i915: always update ELD connector type after get modes

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915: always update ELD connector type after get modes
URL : https://patchwork.freedesktop.org/series/30602/
State : success

== Summary ==

Test kms_setmode:

        Subgroup basic:
                fail       -> PASS       (shard-hsw) fdo#99912

fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912

shard-hsw total:2317 pass:1244 dwarn:3 dfail:0 fail:13 skip:1057 time:9667s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5762/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx