Problems compiling with KCFLAGS="-frecord-gcc-switches"
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" make arch/x86/kvm/emulate.o ./tools/objtool/objtool check --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:
objtool: .GCC.command.line+0x0: special: can't find new instruction
Building a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at __ex_table+0x4c references
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1
Any idea what might cause this problem ?
Thanks,
Guenter
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1
Quoted 2 lines
Any idea what might cause this problem ?
Here is another interesting problem, seen when building arm64 allmodconfig -CONFIG_CPU_BIG_ENDIAN +CONFIG_EFI.
kallsyms failure:
relative symbol value 0xffffff9008073000 out of range in relative mode
This is due to symbols such as
000000000000000e n __efistub_$d
in the symbol table. Those are not filtered out by kallsyms, resulting in a relative "base" address of 0x0e, and all other symbols are out of range. Those symbols are only generated in efi/libstubs.
Any idea what might be going on there, and how to fix it ? An easy fix would be something like
- else if (stype == 'N')
+ else if (toupper(stype) == 'N')
in kallsyms, but that doesn't seem like a clean solution to me.
Thanks,
Guenter
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1
Quoted 1 line
Any idea what might cause this problem ?
I think this is a GCC bug with the -frecord-gcc-switches feature. Due to some ambiguity in some inline asm in emulate.c, it's placing some kernel code in the .GCC.command.line section.
This seems to fix it:
arch/x86/kvm/emulate.c +4 -2
@@ -425,8 +425,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));#op " %al \n\t" \ FOP_RET -asm(".global kvm_fastop_exception \n" -"kvm_fastop_exception: xor %esi, %esi; ret" ); +asm(".pushsection .fixup, \"ax\"\n" +".global kvm_fastop_exception \n" +"kvm_fastop_exception: xor %esi, %esi; ret\n" +".popsection" );FOP_START (setcc)FOP_SETCC (seto)
Quoted 48 lines · Guenter Roeck
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1Quoted 2 lines
Any idea what might cause this problem ?
Here is another interesting problem, seen when building arm64 allmodconfig -CONFIG_CPU_BIG_ENDIAN +CONFIG_EFI.
kallsyms failure:
relative symbol value 0xffffff9008073000 out of range in relative modeThis is due to symbols such as
000000000000000en __efistub_$din the symbol table. Those are not filtered out by kallsyms, resulting in a relative "base" address of
0x0e, and all other symbols are out of range. Those symbols are only generated in efi/libstubs.Any idea what might be going on there, and how to fix it ? An easy fix would be something like
(quoted diff) +1
-1- else if (stype == 'N') + else if (toupper(stype) == 'N')
Quoted 1 line
in kallsyms, but that doesn't seem like a clean solution to me.
Not sure... What does 'n' mean? I don't see it in the man page for nm.
Signature · 1 line
Josh
Quoted 46 lines · Josh Poimboeuf
Quoted 45 lines · Guenter Roeck
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1Quoted 2 lines
Any idea what might cause this problem ?
Here is another interesting problem, seen when building arm64 allmodconfig -CONFIG_CPU_BIG_ENDIAN +CONFIG_EFI.
kallsyms failure:
relative symbol value 0xffffff9008073000 out of range in relative modeThis is due to symbols such as
000000000000000en __efistub_$din the symbol table. Those are not filtered out by kallsyms, resulting in a relative "base" address of
0x0e, and all other symbols are out of range. Those symbols are only generated in efi/libstubs.Any idea what might be going on there, and how to fix it ? An easy fix would be something like
Quoted 7 lines
Quoted 4 lines
(quoted diff) +1
-1- else if (stype == 'N') + else if (toupper(stype) == 'N')in kallsyms, but that doesn't seem like a clean solution to me.
Not sure... What does 'n' mean? I don't see it in the man page for nm.
Good question. As far as I can see, gcc uses it to mark symbols associated with -frecord-gcc-switches, presumably in the .GCC.command.line section.
Guenter
Guenter Roeck
Tested-byQuoted 25 lines · Josh Poimboeuf
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1
Quoted 6 lines
Quoted 1 line
Any idea what might cause this problem ?
I think this is a GCC bug with the -frecord-gcc-switches feature. Due to some ambiguity in some inline asm in
emulate.c, it's placing some kernel code in the .GCC.command.line section.
Interesting. Makes me wonder if it is doing something similar in the efi code.
Quoted 11 lines
This seems to fix it:
arch/x86/kvm/emulate.c +0
-0@@ -425,8 +425,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));#op " %al \n\t" \ FOP_RET
arch/x86/kvm/emulate.c static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *)); · line 434
Quoted 10 lines
arch/x86/kvm/emulate.c +4
-2-asm(".global kvm_fastop_exception \n" -"kvm_fastop_exception: xor %esi, %esi; ret" ); +asm(".pushsection .fixup, \"ax\"\n" +".global kvm_fastop_exception \n" +"kvm_fastop_exception: xor %esi, %esi; ret\n" +".popsection" );FOP_START (setcc)FOP_SETCC (seto)
Yes, that fixes the problem for me.
Do you want to send a real patch ? If yes, feel free to add
Thanks,
Guenter
Hi Josh,
Quoted 41 lines · Josh Poimboeuf
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1Quoted 1 line
Any idea what might cause this problem ?
I think this is a GCC bug with the -frecord-gcc-switches feature. Due to some ambiguity in some inline asm in
emulate.c, it's placing some kernel code in the .GCC.command.line section.This seems to fix it:
arch/x86/kvm/emulate.c +0
-0@@ -425,8 +425,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));#op " %al \n\t" \ FOP_RET
arch/x86/kvm/emulate.c static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *)); · line 434
Quoted 10 lines
arch/x86/kvm/emulate.c +4
-2-asm(".global kvm_fastop_exception \n" -"kvm_fastop_exception: xor %esi, %esi; ret" ); +asm(".pushsection .fixup, \"ax\"\n" +".global kvm_fastop_exception \n" +"kvm_fastop_exception: xor %esi, %esi; ret\n" +".popsection" );FOP_START (setcc)FOP_SETCC (seto)
Do you plan to submit a patch for this, or do you want me to do it ?
Thanks,
Guenter
Quoted 52 lines · Guenter Roeck
Hi Josh,
Quoted 49 lines · Josh Poimboeuf
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1Quoted 1 line
Any idea what might cause this problem ?
I think this is a GCC bug with the -frecord-gcc-switches feature. Due to some ambiguity in some inline asm in
emulate.c, it's placing some kernel code in the .GCC.command.line section.This seems to fix it:
arch/x86/kvm/emulate.c +4
-2@@ -425,8 +425,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));#op " %al \n\t" \ FOP_RET -asm(".global kvm_fastop_exception \n" -"kvm_fastop_exception: xor %esi, %esi; ret" ); +asm(".pushsection .fixup, \"ax\"\n" +".global kvm_fastop_exception \n" +"kvm_fastop_exception: xor %esi, %esi; ret\n" +".popsection" );
Quoted 4 lines
arch/x86/kvm/emulate.c static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *)); · line 434
Quoted 2 lines
arch/x86/kvm/emulate.c +0
-0FOP_START (setcc)FOP_SETCC (seto)Do you plan to submit a patch for this, or do you want me to do it ?
Sorry, I've been juggling a bunch of other bugs. I'll submit it soon.
Signature · 1 line
Josh
Quoted 53 lines · Josh Poimboeuf
Quoted 52 lines · Guenter Roeck
Hi Josh,
Quoted 49 lines · Josh Poimboeuf
Quoted 24 lines · Guenter Roeck
Hi Josh,
when trying to compile an image with KCFLAGS="-frecord-gcc-switches", I get the folllowing build warning/error.
make allmodconfig
KCFLAGS="-frecord-gcc-switches" makearch/x86/kvm/emulate.o./tools/objtool/objtoolcheck --no-unreachable "arch/x86/kvm/emulate.o"
arch/x86/kvm/emulate.o: warning:objtool: .GCC.command.line+0x0: special: can't find new instructionBuilding a full image aborts with:
WARNING: arch/x86/kvm/kvm.o(__ex_table+0x4c): Section mismatch in reference
from the (unknown reference) (unknown)
to the variable .GCC.command.line:kvm_fastop_exception
FATAL: The relocation at__ex_table+0x4creferences
section ".GCC.command.line" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
make[2]: *** [arch/x86/kvm/kvm.o] Error 1Quoted 1 line
Any idea what might cause this problem ?
I think this is a GCC bug with the -frecord-gcc-switches feature. Due to some ambiguity in some inline asm in
emulate.c, it's placing some kernel code in the .GCC.command.line section.This seems to fix it:
arch/x86/kvm/emulate.c +4
-2@@ -425,8 +425,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));#op " %al \n\t" \ FOP_RET -asm(".global kvm_fastop_exception \n" -"kvm_fastop_exception: xor %esi, %esi; ret" ); +asm(".pushsection .fixup, \"ax\"\n" +".global kvm_fastop_exception \n" +"kvm_fastop_exception: xor %esi, %esi; ret\n" +".popsection" );
Quoted 7 lines
Quoted 4 lines
arch/x86/kvm/emulate.c static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *)); · line 434
Quoted 2 lines
arch/x86/kvm/emulate.c +0
-0FOP_START (setcc)FOP_SETCC (seto)Do you plan to submit a patch for this, or do you want me to do it ?
Sorry, I've been juggling a bunch of other bugs. I'll submit it soon.
Welcome to the club ...
Thanks!
Guenter