scsi: qla2xxx: remove dead code in qla82xx_write_flash_data

index a77c339..d5c3d36 100644
@@ -2676,33 +2676,14 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr,
 	int ret;
 	uint32_t liter;
 	uint32_t rest_addr;
-	dma_addr_t optrom_dma;
-	void *optrom = NULL;
-	int page_mode = 0;
 	struct qla_hw_data *ha = vha->hw;
 
-	ret = -1;
-
-	/* Prepare burst-capable write on supported ISPs. */
-	if (page_mode && !(faddr & 0xfff) &&
-	    dwords > OPTROM_BURST_DWORDS) {
-		optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
-		    &optrom_dma, GFP_KERNEL);
-		if (!optrom) {
-			ql_log(ql_log_warn, vha, 0xb01b,
-			    "Unable to allocate memory "
-			    "for optrom burst write (%x KB).\n",
-			    OPTROM_BURST_SIZE / 1024);
-		}
-	}
-
 	rest_addr = ha->fdt_block_size - 1;
-
 	ret = qla82xx_unprotect_flash(ha);
 	if (ret) {
 		ql_log(ql_log_warn, vha, 0xb01c,
 		    "Unable to unprotect flash for update.\n");
-		goto write_done;
+		return ret;
 	}
 
 	for (liter = 0; liter < dwords; liter++, faddr += 4, dwptr++) {

@@ -2718,34 +2699,6 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr,
 			}
 		}
 
-		/* Go with burst-write. */
-		if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
-			/* Copy data to DMA'ble buffer. */
-			memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
-
-			ret = qla2x00_load_ram(vha, optrom_dma,
-			    (ha->flash_data_off | faddr),
-			    OPTROM_BURST_DWORDS);
-			if (ret != QLA_SUCCESS) {
-				ql_log(ql_log_warn, vha, 0xb01e,
-				    "Unable to burst-write optrom segment "
-				    "(%x/%x/%llx).\n", ret,
-				    (ha->flash_data_off | faddr),
-				    (unsigned long long)optrom_dma);
-				ql_log(ql_log_warn, vha, 0xb01f,
-				    "Reverting to slow-write.\n");
-
-				dma_free_coherent(&ha->pdev->dev,
-				    OPTROM_BURST_SIZE, optrom, optrom_dma);
-				optrom = NULL;
-			} else {
-				liter += OPTROM_BURST_DWORDS - 1;
-				faddr += OPTROM_BURST_DWORDS - 1;
-				dwptr += OPTROM_BURST_DWORDS - 1;
-				continue;
-			}
-		}
-
 		ret = qla82xx_write_flash_dword(ha, faddr,
 		    cpu_to_le32(*dwptr));
 		if (ret) {

@@ -2760,10 +2713,7 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr,
 	if (ret)
 		ql_log(ql_log_warn, vha, 0xb021,
 		    "Unable to protect flash after update.\n");
-write_done:
-	if (optrom)
-		dma_free_coherent(&ha->pdev->dev,
-		    OPTROM_BURST_SIZE, optrom, optrom_dma);
+
 	return ret;
 }