i915 PMU and engine busy stats
Subsystems (3)
Tvrtko Ursulin
maintainerv7 cover i915 PMU and engine busy stats
From: Tvrtko Ursulin <[email protected]>
Headline change is removal of the static branch optimisation since I couldn't prove that it makes a significant difference in the real world. I was able to meaure a small CPU usage decrease in our lrc tasklet, in one micro-benchmark, but I did not feel that justified it.
There are also tweaks to engine busyness tracking and the delayed stats disable got moved to a different patch due to the above.
Patch 1 is a small refactor to make the following work easier.
Patch 2 is the main bit.
Patch 3 is a small optimisation on top, to only run the sampling timer when it is required. (Depending on GPU awake status and active PMU counters.)
Patches 4-6 add software engine busyness tracking, which is then used from the PMU. This allows more efficient and more accurate engine busyness metric.
Patches 7-9 add the RC6 and interrupt count metric.
Tvrtko Ursulin (9):
drm/i915: Extract intel_get_cagf drm/i915/pmu: Expose a PMU interface for perf queries drm/i915/pmu: Suspend sampling when GPU is idle drm/i915: Wrap context schedule notification drm/i915: Engine busy time tracking drm/i915/pmu: Wire up engine busy stats to PMU drm/i915/pmu: Add interrupt count metric drm/i915: Convert intel_rc6_residency_us to ns drm/i915/pmu: Add RC6 residency metrics
drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_debugfs.c | 9 +- drivers/gpu/drm/i915/i915_drv.c | 2 + drivers/gpu/drm/i915/i915_drv.h | 28 +- drivers/gpu/drm/i915/i915_gem.c | 1 + drivers/gpu/drm/i915/i915_gem_request.c | 1 + drivers/gpu/drm/i915/i915_pmu.c | 855 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_pmu.h | 100 ++++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/i915_sysfs.c | 20 +- drivers/gpu/drm/i915/intel_engine_cs.c | 122 +++++ drivers/gpu/drm/i915/intel_lrc.c | 19 +- drivers/gpu/drm/i915/intel_pm.c | 41 +- drivers/gpu/drm/i915/intel_ringbuffer.h | 132 +++++ include/uapi/drm/i915_drm.h | 54 ++ 15 files changed, 1353 insertions(+), 35 deletions(-) create mode 100644 drivers/gpu/drm/i915/i915_pmu.c create mode 100644 drivers/gpu/drm/i915/i915_pmu.h
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 1/9 drm/i915: Extract intel_get_cagf
From: Tvrtko Ursulin <[email protected]>
Code to be shared between debugfs and the PMU implementation.
v2: Checkpatch cleanup.
v3: Also consolidate i915_sysfs.c/gt_act_freq_mhz_show.
v4: Rebase.
--- drivers/gpu/drm/i915/i915_debugfs.c | 9 ++------- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_sysfs.c | 11 +++-------- drivers/gpu/drm/i915/intel_pm.c | 14 ++++++++++++++ 4 files changed, 21 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -7
@@ -1178,13 +1178,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused) rpdownei =I915_READ (GEN6_RP_CUR_DOWN_EI ) &GEN6_CURIAVG_MASK ; rpcurdown =I915_READ (GEN6_RP_CUR_DOWN ) &GEN6_CURBSYTAVG_MASK ; rpprevdown =I915_READ (GEN6_RP_PREV_DOWN ) &GEN6_CURBSYTAVG_MASK ; -if (INTEL_GEN (dev_priv) >=9 ) - cagf = (rpstat &GEN9_CAGF_MASK ) >>GEN9_CAGF_SHIFT ; -else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) - cagf = (rpstat &HSW_CAGF_MASK ) >>HSW_CAGF_SHIFT ; -else - cagf = (rpstat &GEN6_CAGF_MASK ) >>GEN6_CAGF_SHIFT ; - cagf =intel_gpu_freq (dev_priv, cagf); + cagf =intel_gpu_freq (dev_priv, +intel_get_cagf (dev_priv, rpstat));intel_uncore_forcewake_put (dev_priv,FORCEWAKE_ALL );
drivers/gpu/drm/i915/i915_drv.h +2 -0
@@ -4187,6 +4187,8 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);u64 intel_rc6_residency_us (struct drm_i915_private *dev_priv,const i915_reg_t reg); +u32 intel_get_cagf (struct drm_i915_private *dev_priv,u32 rpstat1); +#define I915_READ8 (reg) dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true)#define I915_WRITE8 (reg, val) dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true)
drivers/gpu/drm/i915/i915_sysfs.c +3 -8
@@ -252,14 +252,9 @@ static ssize_t gt_act_freq_mhz_show(struct device *kdev, freq =vlv_punit_read (dev_priv,PUNIT_REG_GPU_FREQ_STS ); ret =intel_gpu_freq (dev_priv, (freq >>8 ) &0xff ); }else { -u32 rpstat =I915_READ (GEN6_RPSTAT1 ); -if (INTEL_GEN (dev_priv) >=9 ) - ret = (rpstat &GEN9_CAGF_MASK ) >>GEN9_CAGF_SHIFT ; -else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) - ret = (rpstat &HSW_CAGF_MASK ) >>HSW_CAGF_SHIFT ; -else - ret = (rpstat &GEN6_CAGF_MASK ) >>GEN6_CAGF_SHIFT ; - ret =intel_gpu_freq (dev_priv, ret); + ret =intel_gpu_freq (dev_priv, +intel_get_cagf (dev_priv, +I915_READ (GEN6_RPSTAT1 ))); }mutex_unlock (&dev_priv->pcu_lock);
drivers/gpu/drm/i915/intel_pm.c +14 -0
@@ -9513,3 +9513,17 @@ u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv,intel_runtime_pm_put (dev_priv);return DIV_ROUND_UP_ULL (time_hw * units, div); } + +u32 intel_get_cagf (struct drm_i915_private *dev_priv,u32 rpstat) +{ +u32 cagf; + +if (INTEL_GEN (dev_priv) >=9 ) + cagf = (rpstat &GEN9_CAGF_MASK ) >>GEN9_CAGF_SHIFT ; +else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) + cagf = (rpstat &HSW_CAGF_MASK ) >>HSW_CAGF_SHIFT ; +else + cagf = (rpstat &GEN6_CAGF_MASK ) >>GEN6_CAGF_SHIFT ; + +return cagf; +}
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 2/9 drm/i915/pmu: Expose a PMU interface for perf queries
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
From: Chris Wilson <[email protected]>
From: Tvrtko Ursulin <[email protected]>
From: Dmitry Rogozhkin <[email protected]>
The first goal is to be able to measure GPU (and invidual ring) busyness without having to poll registers from userspace. (Which not only incurs holding the forcewake lock indefinitely, perturbing the system, but also runs the risk of hanging the machine.) As an alternative we can use the perf event counter interface to sample the ring registers periodically and send those results to userspace.
Functionality we are exporting to userspace is via the existing perf PMU API and can be exercised via the existing tools. For example:
perf stat -a -e i915/rcs0-busy/ -I 1000
Will print the render engine busynnes once per second. All the performance counters can be enumerated (perf list) and have their unit of measure correctly reported in sysfs.
v1-v2 (Chris Wilson):
v2: Use a common timer for the ring sampling.
v3: (Tvrtko Ursulin)
* Decouple uAPI from i915 engine ids.
* Complete uAPI defines.
* Refactor some code to helpers for clarity.
* Skip sampling disabled engines.
* Expose counters in sysfs.
* Pass in fake regs to avoid null ptr deref in perf core.
* Convert to class/instance uAPI.
* Use shared driver code for rc6 residency, power and frequency.
v4: (Dmitry Rogozhkin)
* Register PMU with .task_ctx_nr=perf_invalid_context
* Expose cpumask for the PMU with the single CPU in the mask
* Properly support pmu->stop(): it should call pmu->read()
* Properly support pmu->del(): it should call stop(event, PERF_EF_UPDATE)
* Introduce refcounting of event subscriptions.
* Make pmu.busy_stats a refcounter to avoid busy stats going away with some deleted event.
* Expose cpumask for i915 PMU to avoid multiple events creation of the same type followed by counter aggregation by perf-stat.
* Track CPUs getting online/offline to migrate perf context. If (likely) cpumask will initially set CPU0, CONFIG_BOOTPARAM_HOTPLUG_CPU0 will be needed to see effect of CPU status tracking.
* End result is that only global events are supported and perf stat works correctly.
* Deny perf driver level sampling - it is prohibited for uncore PMU.
v5: (Tvrtko Ursulin)
* Don't hardcode number of engine samplers.
* Rewrite event ref-counting for correctness and simplicity.
* Store initial counter value when starting already enabled events to correctly report values to all listeners.
* Fix RC6 residency readout.
* Comments, GPL header.
v6:
* Add missing entry to v4 changelog.
* Fix accounting in CPU hotplug case by copying the approach from arch/x86/events/intel/cstate.c. (Dmitry Rogozhkin)
v7:
* Log failure message only on failure.
* Remove CPU hotplug notification state on unregister.
v8:
* Fix error unwind on failed registration.
* Checkpatch cleanup.
v9:
* Drop the energy metric, it is available via intel_rapl_perf. (Ville Syrjälä)
* Use HAS_RC6(p). (Chris Wilson)
* Handle unsupported non-engine events. (Dmitry Rogozhkin)
* Rebase for intel_rc6_residency_ns needing caller managed runtime pm.
* Drop HAS_RC6 checks from the read callback since creating those events will be rejected at init time already.
* Add counter units to sysfs so perf stat output is nicer.
* Cleanup the attribute tables for brevity and readability.
v10:
* Fixed queued accounting.
v11:
* Move intel_engine_lookup_user to intel_engine_cs.c
* Commit update. (Joonas Lahtinen)
v12:
* More accurate sampling. (Chris Wilson)
* Store and report frequency in MHz for better usability from perf stat.
* Removed metrics: queued, interrupts, rc6 counters.
* Sample engine busyness based on seqno difference only for less MMIO (and forcewake) on all platforms. (Chris Wilson)
v13:
* Comment spelling, use mul_u32_u32 to work around potential GCC issue and somne code alignment changes. (Chris Wilson)
v14:
* Rebase.
v15:
* Rebase for RPS refactoring.
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.c | 2 + drivers/gpu/drm/i915/i915_drv.h | 14 + drivers/gpu/drm/i915/i915_pmu.c | 659 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_pmu.h | 96 +++++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_engine_cs.c | 35 ++ drivers/gpu/drm/i915/intel_ringbuffer.h | 26 ++ include/uapi/drm/i915_drm.h | 48 +++ 9 files changed, 884 insertions(+) create mode 100644 drivers/gpu/drm/i915/i915_pmu.c create mode 100644 drivers/gpu/drm/i915/i915_pmu.h
drivers/gpu/drm/i915/Makefile +1 -0
@@ -26,6 +26,7 @@ i915-y := i915_drv.o \ i915-$(CONFIG_COMPAT) += i915_ioc32.o i915-$(CONFIG_DEBUG_FS) += i915_debugfs.o intel_pipe_crc.o +i915-$(CONFIG_PERF_EVENTS) += i915_pmu.o # GEM code i915-y += i915_cmd_parser.o \
drivers/gpu/drm/i915/i915_drv.c +2 -0
@@ -1215,6 +1215,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)struct drm_device *dev = &dev_priv->drm;i915_gem_shrinker_init (dev_priv); +i915_pmu_register (dev_priv);/* * Notify a valid surface after modesetting,
@@ -1269,6 +1270,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)intel_opregion_unregister (dev_priv);i915_perf_unregister (dev_priv); +i915_pmu_unregister (dev_priv);i915_teardown_sysfs (dev_priv);i915_guc_log_unregister (dev_priv);
drivers/gpu/drm/i915/i915_drv.h +14 -0
@@ -40,6 +40,7 @@#include <linux/hash.h> #include <linux/intel-iommu.h> #include <linux/kref.h> +#include <linux/perf_event.h> #include <linux/pm_qos.h> #include <linux/reservation.h> #include <linux/shmem_fs.h>
@@ -2272,6 +2273,8 @@ struct drm_i915_private {struct i915_gem_context *kernel_context;/* Context only to be used for injecting preemption commands */ struct i915_gem_context *preempt_context; +struct intel_engine_cs *engine_class[MAX_ENGINE_CLASS +1 ] + [MAX_ENGINE_INSTANCE +1 ];struct i915_vma *semaphore;struct drm_dma_handle *status_page_dmah;
@@ -2742,6 +2745,8 @@ struct drm_i915_private {int irq; } lpe_audio; +struct i915_pmu pmu; +/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place.
@@ -3988,6 +3993,15 @@ extern void i915_perf_fini(struct drm_i915_private *dev_priv);extern void i915_perf_register (struct drm_i915_private *dev_priv);extern void i915_perf_unregister (struct drm_i915_private *dev_priv); +/* i915_pmu.c */ +#ifdef CONFIG_PERF_EVENTS +void i915_pmu_register (struct drm_i915_private *i915); +void i915_pmu_unregister (struct drm_i915_private *i915); +#else +static inline void i915_pmu_register (struct drm_i915_private *i915) {} +static inline void i915_pmu_unregister (struct drm_i915_private *i915) {} +#endif +/* i915_suspend.c */ extern int i915_save_state (struct drm_i915_private *dev_priv);extern int i915_restore_state (struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/i915_pmu.c new file +659 -0
659 lines not on this page · raw message
drivers/gpu/drm/i915/i915_pmu.h new file +96 -0
96 lines not on this page · raw message
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -186,6 +186,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define VIDEO_ENHANCEMENT_CLASS 2#define COPY_ENGINE_CLASS 3#define OTHER_CLASS 4 +#define MAX_ENGINE_CLASS 4 + +#define MAX_ENGINE_INSTANCE 1/* PCI config space */
drivers/gpu/drm/i915/intel_engine_cs.c +35 -0
@@ -202,6 +202,15 @@ intel_engine_setup(struct drm_i915_private *dev_priv,GEM_BUG_ON (info->class >=ARRAY_SIZE (intel_engine_classes)); class_info = &intel_engine_classes[info->class]; +if (GEM_WARN_ON (info->class >MAX_ENGINE_CLASS )) +return -EINVAL ; + +if (GEM_WARN_ON (info->instance >MAX_ENGINE_INSTANCE )) +return -EINVAL ; + +if (GEM_WARN_ON (dev_priv->engine_class[info->class][info->instance])) +return -EINVAL ; +GEM_BUG_ON (dev_priv->engine[id]); engine =kzalloc (sizeof (*engine),GFP_KERNEL );if (!engine)
@@ -229,6 +238,7 @@ intel_engine_setup(struct drm_i915_private *dev_priv,ATOMIC_INIT_NOTIFIER_HEAD (&engine->context_status_notifier); + dev_priv->engine_class[info->class][info->instance] = engine; dev_priv->engine[id] = engine;return 0 ; }
@@ -1776,6 +1786,31 @@ void intel_engine_dump(struct intel_engine_cs *engine, struct drm_printer *m)drm_printf (m,"\n" ); } +static u8 user_class_map[I915_ENGINE_CLASS_MAX ] = { + [I915_ENGINE_CLASS_OTHER ] =OTHER_CLASS , + [I915_ENGINE_CLASS_RENDER ] =RENDER_CLASS , + [I915_ENGINE_CLASS_COPY ] =COPY_ENGINE_CLASS , + [I915_ENGINE_CLASS_VIDEO ] =VIDEO_DECODE_CLASS , + [I915_ENGINE_CLASS_VIDEO_ENHANCE ] =VIDEO_ENHANCEMENT_CLASS , +}; + +struct intel_engine_cs * +intel_engine_lookup_user (struct drm_i915_private *i915,u8 class,u8 instance) +{ +if (class >=ARRAY_SIZE (user_class_map)) +return NULL ; + + class = user_class_map[class]; + +if (WARN_ON_ONCE (class >MAX_ENGINE_CLASS )) +return NULL ; + +if (instance >MAX_ENGINE_INSTANCE ) +return NULL ; + +return i915->engine_class[class][instance]; +} +#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )#include "selftests/mock_engine.c" #endif
drivers/gpu/drm/i915/intel_ringbuffer.h +26 -0
@@ -5,6 +5,7 @@#include "i915_gem_batch_pool.h" #include "i915_gem_request.h" #include "i915_gem_timeline.h" +#include "i915_pmu.h" #include "i915_selftest.h" struct drm_printer ;
@@ -337,6 +338,28 @@ struct intel_engine_cs { I915_SELFTEST_DECLARE(bool mock : 1); } breadcrumbs; +struct { +/** +* @enable: Bitmask of enable sample events on this engine. +* +* Bits correspond to sample event types, for instance +* I915_SAMPLE_QUEUED is bit 0 etc. +*/ +u32 enable; +/** +* @enable_count: Reference count for the enabled samplers. +* +* Index number corresponds to the bit number from @enable. +*/ +unsigned int enable_count[I915_PMU_SAMPLE_BITS ]; +/** +* @sample: Counter values for sampling events. +* +* Our internal timer stores the current counters in this field. +*/ +struct i915_pmu_sample sample[I915_ENGINE_SAMPLE_MAX ]; + } pmu; +/* * A pool of objects to use as shadow copies of client batch buffers * when the command parser is enabled. Prevents the client from
@@ -843,4 +866,7 @@ bool intel_engine_can_store_dword(struct intel_engine_cs *engine);void intel_engine_dump (struct intel_engine_cs *engine,struct drm_printer *p); +struct intel_engine_cs * +intel_engine_lookup_user (struct drm_i915_private *i915,u8 class,u8 instance); +#endif /* _INTEL_RINGBUFFER_H_ */
include/uapi/drm/i915_drm.h +48 -0
54 lines not on this page · raw message
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 3/9 drm/i915/pmu: Suspend sampling when GPU is idle
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
If only a subset of events is enabled we can afford to suspend the sampling timer when the GPU is idle and so save some cycles and power.
v2: Rebase and limit timer even more.
v3: Rebase.
v4: Rebase.
v5: Skip action if perf PMU failed to register.
v6: Checkpatch cleanup.
v7:
* Add a common helper to start the timer if needed. (Chris Wilson)
* Add comment explaining bitwise logic in pmu_needs_timer.
v8: Fix some comments styles. (Chris Wilson)
v9: Rebase.
--- drivers/gpu/drm/i915/i915_drv.h | 4 ++ drivers/gpu/drm/i915/i915_gem.c | 1 + drivers/gpu/drm/i915/i915_gem_request.c | 1 + drivers/gpu/drm/i915/i915_pmu.c | 88 +++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/i915_pmu.h | 4 ++ 5 files changed, 88 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +4 -0
@@ -3997,9 +3997,13 @@ extern void i915_perf_unregister(struct drm_i915_private *dev_priv);#ifdef CONFIG_PERF_EVENTS void i915_pmu_register (struct drm_i915_private *i915);void i915_pmu_unregister (struct drm_i915_private *i915); +void i915_pmu_gt_idle (struct drm_i915_private *i915); +void i915_pmu_gt_active (struct drm_i915_private *i915);#else static inline void i915_pmu_register (struct drm_i915_private *i915) {}static inline void i915_pmu_unregister (struct drm_i915_private *i915) {} +static inline void i915_pmu_gt_idle (struct drm_i915_private *i915) {} +static inline void i915_pmu_gt_active (struct drm_i915_private *i915) {}#endif /* i915_suspend.c */
drivers/gpu/drm/i915/i915_gem.c +1 -0
@@ -3269,6 +3269,7 @@ i915_gem_idle_work_handler(struct work_struct *work)intel_engines_mark_idle (dev_priv);i915_gem_timelines_mark_idle (dev_priv); +i915_pmu_gt_idle (dev_priv);GEM_BUG_ON (!dev_priv->gt.awake); dev_priv->gt.awake = false;
drivers/gpu/drm/i915/i915_gem_request.c +1 -0
@@ -258,6 +258,7 @@ static void mark_busy(struct drm_i915_private *i915)i915_update_gfx_val (i915);if (INTEL_GEN (i915) >=6 )gen6_rps_busy (i915); +i915_pmu_gt_active (i915); queue_delayed_work(i915->wq, &i915->gt.retire_work,
drivers/gpu/drm/i915/i915_pmu.c +78 -10
119 lines not on this page · raw message
drivers/gpu/drm/i915/i915_pmu.h +4 -0
@@ -83,6 +83,10 @@ struct i915_pmu {*/ unsigned int enable_count[I915_PMU_MASK_BITS ];/** +* @timer_enabled: Should the internal sampling timer be running. +*/ +bool timer_enabled; +/** * @sample: Current and previous (raw) counters for sampling events. * * These counters are updated from the i915 PMU sampling timer.
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 4/9 drm/i915: Wrap context schedule notification
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
No functional change just something which will be handy in the following patch.
--- drivers/gpu/drm/i915/intel_lrc.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_lrc.c +14 -3
@@ -400,6 +400,18 @@ execlists_context_status_change(struct drm_i915_gem_request *rq, status, rq); } +static inline void +execlists_context_schedule_in (struct drm_i915_gem_request *rq) +{ +execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_IN ); +} + +static inline void +execlists_context_schedule_out (struct drm_i915_gem_request *rq) +{ +execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_OUT ); +} +static void execlists_update_context_pdps (struct i915_hw_ppgtt *ppgtt,u32 *reg_state) {
@@ -451,7 +463,7 @@ static void execlists_submit_ports(struct intel_engine_cs *engine)if (rq) {GEM_BUG_ON (count > !n);if (!count++) -execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_IN ); +execlists_context_schedule_in (rq);port_set (&port[n],port_pack (rq, count)); desc =execlists_update_context (rq);GEM_DEBUG_EXEC (port[n].context_id =upper_32_bits (desc));
@@ -879,8 +891,7 @@ static void intel_lrc_irq_handler(unsigned long data)if (--count ==0 ) {GEM_BUG_ON (status &GEN8_CTX_STATUS_PREEMPTED );GEM_BUG_ON (!i915_gem_request_completed (rq)); -execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_OUT ); - +execlists_context_schedule_out (rq);trace_i915_gem_request_out (rq); rq->priotree.priority =INT_MAX ;i915_gem_request_put (rq);
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 5/9 drm/i915: Engine busy time tracking
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
Track total time requests have been executing on the hardware.
We add new kernel API to allow software tracking of time GPU engines are spending executing requests.
Both per-engine and global API is added with the latter also being exported for use by external users.
v2:
* Squashed with the internal API.
* Dropped static key.
* Made per-engine.
* Store time in monotonic ktime.
v3: Moved stats clearing to disable.
v4:
* Comments.
* Don't export the API just yet.
v5: Whitespace cleanup.
v6:
* Rename ref to active.
* Drop engine aggregate stats for now.
* Account initial busy period after enabling stats.
v7:
* Rebase.
v8:
* Move context in notification after the notifier. (Chris Wilson)
v9:
In cases where stats tracking is getting disabled while there is an active context on an engine, add up the current value to the total. This also implies we don't clear the total when tracking is disabled any longer. There is no real need to do so because we define the stats as relative while enabled, meaning comparison between two samples while tracking is enabled is the valid usage. However, when busy stats will later be plugged into the perf PMU API, it is beneficial to not reset the total, since the PMU core likes to do some counter disable/enable cycles on startup, and while doing so during a single long context executing on an engine we would lose some accuracy and so make unit testing more difficult than needs to be.
--- drivers/gpu/drm/i915/intel_engine_cs.c | 87 +++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_lrc.c | 2 + drivers/gpu/drm/i915/intel_ringbuffer.h | 92 +++++++++++++++++++++++++++++++++ 3 files changed, 181 insertions(+)
drivers/gpu/drm/i915/intel_engine_cs.c +87 -0
@@ -236,6 +236,8 @@ intel_engine_setup(struct drm_i915_private *dev_priv,/* Nothing to do here, execute in order of dependencies */ engine->schedule =NULL ; +spin_lock_init (&engine->stats.lock); +ATOMIC_INIT_NOTIFIER_HEAD (&engine->context_status_notifier); dev_priv->engine_class[info->class][info->instance] = engine;
@@ -1811,6 +1813,91 @@ intel_engine_lookup_user(struct drm_i915_private *i915, u8 class, u8 instance)return i915->engine_class[class][instance]; } +/** +* intel_enable_engine_stats() - Enable engine busy tracking on engine +* @engine: engine to enable stats collection +* +* Start collecting the engine busyness data for @engine. +* +* Returns 0 on success or a negative error code. +*/ +int intel_enable_engine_stats (struct intel_engine_cs *engine) +{ +unsigned long flags; + +if (!i915_modparams.enable_execlists) +return -ENODEV ; + +spin_lock_irqsave (&engine->stats.lock, flags); +if (engine->stats.enabled == ~0 ) + goto busy; +if (engine->stats.enabled++ ==0 ) + engine->stats.enabled_at =ktime_get (); +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return 0 ; + +busy: +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return -EBUSY ; +} + +static ktime_t __intel_engine_get_busy_time (struct intel_engine_cs *engine) +{ +ktime_t total = engine->stats.total; + +/* +* If the engine is executing something at the moment +* add it to the total. +*/ +if (engine->stats.active) + total =ktime_add (total, +ktime_sub (ktime_get (), engine->stats.start)); + +return total; +} + +/** +* intel_engine_get_busy_time() - Return current accumulated engine busyness +* @engine: engine to report on +* +* Returns accumulated time @engine was busy since engine stats were enabled. +*/ +ktime_t intel_engine_get_busy_time (struct intel_engine_cs *engine) +{ +ktime_t total; +unsigned long flags; + +spin_lock_irqsave (&engine->stats.lock, flags); + total =__intel_engine_get_busy_time (engine); +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return total; +} + +/** +* intel_disable_engine_stats() - Disable engine busy tracking on engine +* @engine: engine to disable stats collection +* +* Stops collecting the engine busyness data for @engine. +*/ +void intel_disable_engine_stats (struct intel_engine_cs *engine) +{ +unsigned long flags; + +if (!i915_modparams.enable_execlists) +return ; + +spin_lock_irqsave (&engine->stats.lock, flags); +WARN_ON_ONCE (engine->stats.enabled ==0 ); +if (--engine->stats.enabled ==0 ) { + engine->stats.total =__intel_engine_get_busy_time (engine); + engine->stats.active =0 ; + } +spin_unlock_irqrestore (&engine->stats.lock, flags); +} +#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )#include "selftests/mock_engine.c" #endif
drivers/gpu/drm/i915/intel_lrc.c +2 -0
@@ -404,11 +404,13 @@ static inline void execlists_context_schedule_in(struct drm_i915_gem_request *rq) {execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_IN ); +intel_engine_context_in (rq->engine); }static inline void execlists_context_schedule_out (struct drm_i915_gem_request *rq) { +intel_engine_context_out (rq->engine);execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_OUT ); }
drivers/gpu/drm/i915/intel_ringbuffer.h +92 -0
102 lines not on this page · raw message
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v10 5/9 drm/i915: Engine busy time tracking
From: Tvrtko Ursulin <[email protected]>
Track total time requests have been executing on the hardware.
We add new kernel API to allow software tracking of time GPU engines are spending executing requests.
Both per-engine and global API is added with the latter also being exported for use by external users.
v2:
* Squashed with the internal API.
* Dropped static key.
* Made per-engine.
* Store time in monotonic ktime.
v3: Moved stats clearing to disable.
v4:
* Comments.
* Don't export the API just yet.
v5: Whitespace cleanup.
v6:
* Rename ref to active.
* Drop engine aggregate stats for now.
* Account initial busy period after enabling stats.
v7:
* Rebase.
v8:
* Move context in notification after the notifier. (Chris Wilson)
v9:
In cases where stats tracking is getting disabled while there is an active context on an engine, add up the current value to the total. This also implies we don't clear the total when tracking is disabled any longer. There is no real need to do so because we define the stats as relative while enabled, meaning comparison between two samples while tracking is enabled is the valid usage. However, when busy stats will later be plugged into the perf PMU API, it is beneficial to not reset the total, since the PMU core likes to do some counter disable/enable cycles on startup, and while doing so during a single long context executing on an engine we would lose some accuracy and so make unit testing more difficult than needs to be.
v10:
* Fix accounting for preemption.
--- drivers/gpu/drm/i915/intel_engine_cs.c | 87 +++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_lrc.c | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.h | 92 +++++++++++++++++++++++++++++++++ 3 files changed, 182 insertions(+)
drivers/gpu/drm/i915/intel_engine_cs.c +87 -0
@@ -237,6 +237,8 @@ intel_engine_setup(struct drm_i915_private *dev_priv,/* Nothing to do here, execute in order of dependencies */ engine->schedule =NULL ; +spin_lock_init (&engine->stats.lock); +ATOMIC_INIT_NOTIFIER_HEAD (&engine->context_status_notifier); dev_priv->engine_class[info->class][info->instance] = engine;
@@ -1815,6 +1817,91 @@ intel_engine_lookup_user(struct drm_i915_private *i915, u8 class, u8 instance)return i915->engine_class[class][instance]; } +/** +* intel_enable_engine_stats() - Enable engine busy tracking on engine +* @engine: engine to enable stats collection +* +* Start collecting the engine busyness data for @engine. +* +* Returns 0 on success or a negative error code. +*/ +int intel_enable_engine_stats (struct intel_engine_cs *engine) +{ +unsigned long flags; + +if (!i915_modparams.enable_execlists) +return -ENODEV ; + +spin_lock_irqsave (&engine->stats.lock, flags); +if (engine->stats.enabled == ~0 ) + goto busy; +if (engine->stats.enabled++ ==0 ) + engine->stats.enabled_at =ktime_get (); +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return 0 ; + +busy: +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return -EBUSY ; +} + +static ktime_t __intel_engine_get_busy_time (struct intel_engine_cs *engine) +{ +ktime_t total = engine->stats.total; + +/* +* If the engine is executing something at the moment +* add it to the total. +*/ +if (engine->stats.active) + total =ktime_add (total, +ktime_sub (ktime_get (), engine->stats.start)); + +return total; +} + +/** +* intel_engine_get_busy_time() - Return current accumulated engine busyness +* @engine: engine to report on +* +* Returns accumulated time @engine was busy since engine stats were enabled. +*/ +ktime_t intel_engine_get_busy_time (struct intel_engine_cs *engine) +{ +ktime_t total; +unsigned long flags; + +spin_lock_irqsave (&engine->stats.lock, flags); + total =__intel_engine_get_busy_time (engine); +spin_unlock_irqrestore (&engine->stats.lock, flags); + +return total; +} + +/** +* intel_disable_engine_stats() - Disable engine busy tracking on engine +* @engine: engine to disable stats collection +* +* Stops collecting the engine busyness data for @engine. +*/ +void intel_disable_engine_stats (struct intel_engine_cs *engine) +{ +unsigned long flags; + +if (!i915_modparams.enable_execlists) +return ; + +spin_lock_irqsave (&engine->stats.lock, flags); +WARN_ON_ONCE (engine->stats.enabled ==0 ); +if (--engine->stats.enabled ==0 ) { + engine->stats.total =__intel_engine_get_busy_time (engine); + engine->stats.active =0 ; + } +spin_unlock_irqrestore (&engine->stats.lock, flags); +} +#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )#include "selftests/mock_engine.c" #endif
drivers/gpu/drm/i915/intel_lrc.c +3 -0
@@ -404,11 +404,13 @@ static inline void execlists_context_schedule_in(struct drm_i915_gem_request *rq) {execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_IN ); +intel_engine_context_in (rq->engine); }static inline void execlists_context_schedule_out (struct drm_i915_gem_request *rq) { +intel_engine_context_out (rq->engine);execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_OUT ); }
@@ -708,6 +710,7 @@ execlist_cancel_port_requests(struct intel_engine_execlists *execlists)while (num_ports-- &&port_isset (port)) {struct drm_i915_gem_request *rq =port_request (port); +intel_engine_context_out (rq->engine);execlists_context_status_change (rq,INTEL_CONTEXT_SCHEDULE_PREEMPTED );i915_gem_request_put (rq);
drivers/gpu/drm/i915/intel_ringbuffer.h +92 -0
102 lines not on this page · raw message
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v10 5/9] drm/i915: Engine busy time tracking
Quoting Tvrtko Ursulin (2017-10-17 11:46:21)
Quoted 37 lines
From: Tvrtko Ursulin <[email protected]>
Track total time requests have been executing on the hardware.
We add new kernel API to allow software tracking of time GPU engines are spending executing requests.
Both per-engine and global API is added with the latter also being exported for use by external users.
v2:
* Squashed with the internal API.
* Dropped static key.
* Made per-engine.
* Store time in monotonic ktime.v3: Moved stats clearing to disable.
v4:
* Comments.
* Don't export the API just yet.v5: Whitespace cleanup.
v6:
* Rename ref to active.
* Drop engine aggregate stats for now.
* Account initial busy period after enabling stats.v7:
* Rebase.v8:
* Move context in notification after the notifier. (Chris Wilson)v9:
Quoted 12 lines
In cases where stats tracking is getting disabled while there is an active context on an engine, add up the current value to the total. This also implies we don't clear the total when tracking is disabled any longer. There is no real need to do so because we define the stats as relative while enabled, meaning comparison between two samples while tracking is enabled is the valid usage. However, when busy stats will later be plugged into the perf PMU API, it is beneficial to not reset the total, since the PMU core likes to do some counter disable/enable cycles on startup, and while doing so during a single long context executing on an engine we would lose some accuracy and so make unit testing more difficult than needs to be.
Ok, so it's a counter since boot and not reset on every pmu reload. We anticipate users are going to be doing (sampleB - sampleA)/delta_time so they aren't concerned with absolute values, just deltas.
Quoted 5 lines
v10:
* Fix accounting for preemption.Signed-off-by Tvrtko Ursulin <[email protected]>Reviewed-by Chris Wilson <[email protected]> (v8)
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 6/9 drm/i915/pmu: Wire up engine busy stats to PMU
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
We can use engine busy stats instead of the sampling timer for better accuracy.
By doing this we replace the stohastic sampling with busyness metric derived directly from engine activity. This is context switch interrupt driven, so as accurate as we can get from software tracking.
As a secondary benefit, we can also not run the sampling timer in cases only busyness metric is enabled.
v2: Rebase.
v3:
* Rebase, comments.
* Leave engine busyness controls out of workers.
v4: Checkpatch cleanup.
v5: Added comment to pmu_needs_timer change.
v6:
* Rebase.
* Fix style of some comments. (Chris Wilson)
v7: Rebase and commit message update. (Chris Wilson)
v8: Add delayed stats disabling to improve accuracy in face of
CPU hotplug events.
--- drivers/gpu/drm/i915/i915_pmu.c | 78 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_ringbuffer.h | 14 ++++++ 2 files changed, 90 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_pmu.c +76 -2
@@ -90,6 +90,11 @@ static unsigned int event_enabled_bit(struct perf_event *event)return config_enabled_bit (event->attr.config); } +static bool supports_busy_stats (void ) +{ +return i915_modparams.enable_execlists; +} +static bool pmu_needs_timer (struct drm_i915_private *i915,bool gpu_active) {u64 enable;
@@ -115,6 +120,12 @@ static bool pmu_needs_timer(struct drm_i915_private *i915, bool gpu_active)*/ if (!gpu_active) enable &= ~ENGINE_SAMPLE_MASK ; +/* +* Also there is software busyness tracking available we do not +* need the timer for I915_SAMPLE_BUSY counter. +*/ +else if (supports_busy_stats ()) + enable &= ~BIT (I915_SAMPLE_BUSY );/* * If some bits remain it means we need the sampling timer running.
@@ -363,6 +374,9 @@ static u64 __i915_pmu_event_read(struct perf_event *event)if (WARN_ON_ONCE (!engine)) {/* Do nothing */ + }else if (sample ==I915_SAMPLE_BUSY && + engine->pmu.busy_stats) { + val =ktime_to_ns (intel_engine_get_busy_time (engine)); }else { val = engine->pmu.sample[sample].cur; }
@@ -399,6 +413,12 @@ static void i915_pmu_event_read(struct perf_event *event)local64_add (new - prev, &event->count); } +static bool engine_needs_busy_stats (struct intel_engine_cs *engine) +{ +return supports_busy_stats () && + (engine->pmu.enable &BIT (I915_SAMPLE_BUSY )); +} +static void i915_pmu_enable (struct perf_event *event) { struct drm_i915_private *i915 =
@@ -438,7 +458,21 @@ static void i915_pmu_enable(struct perf_event *event)GEM_BUG_ON (sample >=I915_PMU_SAMPLE_BITS );GEM_BUG_ON (engine->pmu.enable_count[sample] == ~0 ); - engine->pmu.enable_count[sample]++; +if (engine->pmu.enable_count[sample]++ ==0 ) { +/* +* Enable engine busy stats tracking if needed or +* alternatively cancel the scheduled disable. +* +* If the delayed disable was pending, cancel it and +* in this case do not enable since it already is. +*/ +if (engine_needs_busy_stats (engine) && + !engine->pmu.busy_stats) { + engine->pmu.busy_stats = true; +if (!cancel_delayed_work (&engine->pmu.disable_busy_stats)) +intel_enable_engine_stats (engine); + } + } }/*
@@ -474,8 +508,26 @@ static void i915_pmu_disable(struct perf_event *event)* Decrement the reference count and clear the enabled * bitmask when the last listener on an event goes away. */ -if (--engine->pmu.enable_count[sample] ==0 ) +if (--engine->pmu.enable_count[sample] ==0 ) { engine->pmu.enable &= ~BIT (sample); +if (!engine_needs_busy_stats (engine) && + engine->pmu.busy_stats) { + engine->pmu.busy_stats = false; +/* +* We request a delayed disable to handle the +* rapid on/off cycles on events, which can +* happen when tools like perf stat start, in a +* nicer way. +* +* In addition, this also helps with busy stats +* accuracy with background CPU offline/online +* migration events. +*/ +queue_delayed_work (system_wq, + &engine->pmu.disable_busy_stats, +round_jiffies_up_relative (HZ )); + } + } }GEM_BUG_ON (bit >=I915_PMU_MASK_BITS );
@@ -657,8 +709,18 @@ static int i915_pmu_cpu_offline(unsigned int cpu, struct hlist_node *node)return 0 ; } +static void __disable_busy_stats (struct work_struct *work) +{ +struct intel_engine_cs *engine = +container_of (work,typeof (*engine), pmu.disable_busy_stats.work); + +intel_disable_engine_stats (engine); +} +void i915_pmu_register (struct drm_i915_private *i915) { +struct intel_engine_cs *engine; +enum intel_engine_id id;int ret;if (INTEL_GEN (i915) <=2 ) {
@@ -693,6 +755,10 @@ void i915_pmu_register(struct drm_i915_private *i915) i915->pmu.timer.function = i915_sample; i915->pmu.enable =0 ; +for_each_engine (engine, i915, id) +INIT_DELAYED_WORK (&engine->pmu.disable_busy_stats, + __disable_busy_stats); + ret =perf_pmu_register (&i915->pmu.base,"i915" ,-1 );if (ret ==0 )return ;
@@ -711,6 +777,9 @@ void i915_pmu_register(struct drm_i915_private *i915)void i915_pmu_unregister (struct drm_i915_private *i915) { +struct intel_engine_cs *engine; +enum intel_engine_id id; +if (!i915->pmu.base.event_init)return ;
@@ -722,6 +791,11 @@ void i915_pmu_unregister(struct drm_i915_private *i915)hrtimer_cancel (&i915->pmu.timer); +for_each_engine (engine, i915, id) { +GEM_BUG_ON (engine->pmu.busy_stats); +flush_delayed_work (&engine->pmu.disable_busy_stats); + } +perf_pmu_unregister (&i915->pmu.base); i915->pmu.base.event_init =NULL ; }
drivers/gpu/drm/i915/intel_ringbuffer.h +14 -0
@@ -358,6 +358,20 @@ struct intel_engine_cs {* Our internal timer stores the current counters in this field. */ struct i915_pmu_sample sample[I915_ENGINE_SAMPLE_MAX ]; +/** +* @busy_stats: Has enablement of engine stats tracking been +* requested. +*/ +bool busy_stats; +/** +* @disable_busy_stats: Work item for busy stats disabling. +* +* Same as with @enable_busy_stats action, with the difference +* that we delay it in case there are rapid enable-disable +* actions, which can happen during tool startup (like perf +* stat). +*/ +struct delayed_work disable_busy_stats; } pmu;/*
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 7/9 drm/i915/pmu: Add interrupt count metric
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
For clients like intel-gpu-overlay it is easier to read the count via the perf API than having to parse /proc.
--- drivers/gpu/drm/i915/i915_pmu.c | 23 +++++++++++++++++++++++ include/uapi/drm/i915_drm.h | 4 +++- 2 files changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pmu.c +23 -0
@@ -277,6 +277,22 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)return HRTIMER_RESTART ; } +static u64 count_interrupts (struct drm_i915_private *i915) +{ +/* open-coded kstat_irqs() */ +struct irq_desc *desc =irq_to_desc (i915->drm.pdev->irq); +u64 sum =0 ; +int cpu; + +if (!desc || !desc->kstat_irqs) +return 0 ; + +for_each_possible_cpu (cpu) + sum += *per_cpu_ptr (desc->kstat_irqs, cpu); + +return sum; +} +static void i915_pmu_event_destroy (struct perf_event *event) {WARN_ON (event->parent);
@@ -343,6 +359,8 @@ static int i915_pmu_event_init(struct perf_event *event)if (INTEL_GEN (i915) <6 ) ret = -ENODEV ;break ; +case I915_PMU_INTERRUPTS : +break ;default : ret = -ENOENT ;break ;
@@ -392,6 +410,9 @@ static u64 __i915_pmu_event_read(struct perf_event *event)div_u64 (i915->pmu.sample[__I915_SAMPLE_FREQ_REQ].cur,FREQUENCY );break ; +case I915_PMU_INTERRUPTS : + val =count_interrupts (i915); +break ; } }
@@ -646,6 +667,8 @@ static struct attribute *i915_pmu_events_attrs[] = {I915_EVENT (actual-frequency,I915_PMU_ACTUAL_FREQUENCY ,"MHz" ),I915_EVENT (requested-frequency,I915_PMU_REQUESTED_FREQUENCY ,"MHz" ), +I915_EVENT_ATTR (interrupts,I915_PMU_INTERRUPTS ), + NULL, };
include/uapi/drm/i915_drm.h +3 -1
@@ -132,7 +132,9 @@ enum drm_i915_pmu_engine_sample {#define I915_PMU_ACTUAL_FREQUENCY __I915_PMU_OTHER(0)#define I915_PMU_REQUESTED_FREQUENCY __I915_PMU_OTHER(1) -#define I915_PMU_LAST I915_PMU_REQUESTED_FREQUENCY +#define I915_PMU_INTERRUPTS __I915_PMU_OTHER(2) + +#define I915_PMU_LAST I915_PMU_INTERRUPTS/* Each region is a minimum of 16k, and there are at most 255 of them. */
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 8/9 drm/i915: Convert intel_rc6_residency_us to ns
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
Will be used for exposing the PMU counters.
v2:
* Move intel_runtime_pm_get/put to the callers. (Chris Wilson)
* Restore full unit conversion precision.
--- drivers/gpu/drm/i915/i915_drv.h | 8 +++++++- drivers/gpu/drm/i915/i915_sysfs.c | 9 +++++++-- drivers/gpu/drm/i915/intel_pm.c | 27 +++++++++++++-------------- 3 files changed, 27 insertions(+), 17 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +7 -1
@@ -4202,11 +4202,17 @@ void vlv_phy_reset_lanes(struct intel_encoder *encoder);int intel_gpu_freq (struct drm_i915_private *dev_priv,int val);int intel_freq_opcode (struct drm_i915_private *dev_priv,int val); -u64 intel_rc6_residency_us (struct drm_i915_private *dev_priv, +u64 intel_rc6_residency_ns (struct drm_i915_private *dev_priv,const i915_reg_t reg);u32 intel_get_cagf (struct drm_i915_private *dev_priv,u32 rpstat1); +static inline u64 intel_rc6_residency_us (struct drm_i915_private *dev_priv, +const i915_reg_t reg) +{ +return DIV_ROUND_UP_ULL (intel_rc6_residency_ns (dev_priv, reg),1000 ); +} +#define I915_READ8 (reg) dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true)#define I915_WRITE8 (reg, val) dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true)
drivers/gpu/drm/i915/i915_sysfs.c +7 -2
@@ -42,8 +42,13 @@ static inline struct drm_i915_private *kdev_minor_to_i915(struct device *kdev)static u32 calc_residency (struct drm_i915_private *dev_priv,i915_reg_t reg) { -return DIV_ROUND_CLOSEST_ULL (intel_rc6_residency_us (dev_priv, reg), -1000 ); +u64 res; + +intel_runtime_pm_get (dev_priv); + res =intel_rc6_residency_us (dev_priv, reg); +intel_runtime_pm_put (dev_priv); + +return DIV_ROUND_CLOSEST_ULL (res,1000 ); } static ssize_t
drivers/gpu/drm/i915/intel_pm.c +13 -14
@@ -9482,36 +9482,35 @@ static u64 vlv_residency_raw(struct drm_i915_private *dev_priv,return lower | (u64 )upper <<8 ; } -u64 intel_rc6_residency_us (struct drm_i915_private *dev_priv, +u64 intel_rc6_residency_ns (struct drm_i915_private *dev_priv,const i915_reg_t reg) { -u64 time_hw, units, div; +u64 time_hw; +u32 mul, div;if (!intel_rc6_enabled ())return 0 ; -intel_runtime_pm_get (dev_priv); -/* On VLV and CHV, residency time is in CZ units rather than 1.28us */ if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv)) { - units =1000 ; + mul =1000000 ; div = dev_priv->czclk_freq; - time_hw =vlv_residency_raw (dev_priv, reg); - }else if (IS_GEN9_LP (dev_priv)) { - units =1000 ; - div =1200 ;/* 833.33ns */ - time_hw =I915_READ (reg); }else { - units =128000 ;/* 1.28us */ - div =100000 ; +/* 833.33ns units on Gen9LP, 1.28us elsewhere. */ +if (IS_GEN9_LP (dev_priv)) { + mul =10000 ; + div =12 ; + }else { + mul =1280 ; + div =1 ; + } time_hw =I915_READ (reg); } -intel_runtime_pm_put (dev_priv); -return DIV_ROUND_UP_ULL (time_hw * units, div); +return DIV_ROUND_UP_ULL (time_hw * mul, div); }u32 intel_get_cagf (struct drm_i915_private *dev_priv,u32 rpstat)
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v7 9/9 drm/i915/pmu: Add RC6 residency metrics
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
For clients like intel-gpu-overlay it is easier to read the counters via the perf API than having to parse sysfs.
--- drivers/gpu/drm/i915/i915_pmu.c | 31 +++++++++++++++++++++++++++++++ include/uapi/drm/i915_drm.h | 6 +++++- 2 files changed, 36 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pmu.c +31 -0
@@ -361,6 +361,15 @@ static int i915_pmu_event_init(struct perf_event *event)break ;case I915_PMU_INTERRUPTS :break ; +case I915_PMU_RC6_RESIDENCY : +if (!HAS_RC6 (i915)) + ret = -ENODEV ; +break ; +case I915_PMU_RC6p_RESIDENCY: +case I915_PMU_RC6pp_RESIDENCY: +if (!HAS_RC6p (i915)) + ret = -ENODEV ; +break ;default : ret = -ENOENT ;break ;
@@ -413,6 +422,24 @@ static u64 __i915_pmu_event_read(struct perf_event *event)case I915_PMU_INTERRUPTS : val =count_interrupts (i915);break ; +case I915_PMU_RC6_RESIDENCY : +intel_runtime_pm_get (i915); + val =intel_rc6_residency_ns (i915, +IS_VALLEYVIEW (i915) ? +VLV_GT_RENDER_RC6 : +GEN6_GT_GFX_RC6 ); +intel_runtime_pm_put (i915); +break ; +case I915_PMU_RC6p_RESIDENCY: +intel_runtime_pm_get (i915); + val =intel_rc6_residency_ns (i915, GEN6_GT_GFX_RC6p); +intel_runtime_pm_put (i915); +break ; +case I915_PMU_RC6pp_RESIDENCY: +intel_runtime_pm_get (i915); + val =intel_rc6_residency_ns (i915, GEN6_GT_GFX_RC6pp); +intel_runtime_pm_put (i915); +break ; } }
@@ -669,6 +696,10 @@ static struct attribute *i915_pmu_events_attrs[] = {I915_EVENT_ATTR (interrupts,I915_PMU_INTERRUPTS ), +I915_EVENT (rc6-residency,I915_PMU_RC6_RESIDENCY ,"ns" ), +I915_EVENT (rc6p-residency, I915_PMU_RC6p_RESIDENCY,"ns" ), +I915_EVENT (rc6pp-residency, I915_PMU_RC6pp_RESIDENCY,"ns" ), + NULL, };
include/uapi/drm/i915_drm.h +5 -1
@@ -134,7 +134,11 @@ enum drm_i915_pmu_engine_sample {#define I915_PMU_INTERRUPTS __I915_PMU_OTHER(2) -#define I915_PMU_LAST I915_PMU_INTERRUPTS +#define I915_PMU_RC6_RESIDENCY __I915_PMU_OTHER(3) +#define I915_PMU_RC6p_RESIDENCY __I915_PMU_OTHER(4) +#define I915_PMU_RC6pp_RESIDENCY __I915_PMU_OTHER(5) + +#define I915_PMU_LAST I915_PMU_RC6pp_RESIDENCY/* Each region is a minimum of 16k, and there are at most 255 of them. */
Signature · 6 lines
2.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for i915 PMU and engine busy stats (rev17)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: i915 PMU and engine busy stats (rev17)
URL : https://patchwork.freedesktop.org/series/27488/
State : failure
== Summary ==
Series 27488v17 i915 PMU and engine busy stats
https://patchwork.freedesktop.org/api/1.0/series/27488/revisions/17/mbox/
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> INCOMPLETE (fi-byt-j1900)
pass -> INCOMPLETE (fi-glk-1)
pass -> INCOMPLETE (fi-cnl-y) fdo#103070fdo#103070 https://bugs.freedesktop.org/show_bug.cgi?id=103070
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:456s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:477s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:399s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:579s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:287s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:526s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:525s fi-byt-j1900 total:118 pass:96 dwarn:0 dfail:0 fail:0 skip:21 fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:516s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:562s fi-cnl-y total:118 pass:97 dwarn:0 dfail:0 fail:0 skip:20 fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:439s fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:276s fi-glk-1 total:118 pass:96 dwarn:0 dfail:0 fail:0 skip:21 fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:441s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:463s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:507s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:475s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:505s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:579s fi-kbl-7567u total:289 pass:265 dwarn:4 dfail:0 fail:0 skip:20 time:491s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:596s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:491s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:662s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:538s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:521s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:469s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:584s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:432s
fi-pnv-d510 failed to connect after reboot
36e0e803d3d7fb3d74e9086ad7c749123661589e drm-tip: 2017y-10m-11d-11h-31m-33s UTC integration manifest db3f415f88cf drm/i915/pmu: Add RC6 residency metrics33009a52f106 drm/i915: Convert intel_rc6_residency_us to nse656a0d60d48 drm/i915/pmu: Add interrupt count metricffcd72f22bc7 drm/i915/pmu: Wire up engine busy stats to PMU2f229eb2b5c0 drm/i915: Engine busy time tracking6ae7caca1569 drm/i915: Wrap context schedule notification3d949452bedc drm/i915/pmu: Suspend sampling when GPU is idlef7931c3b3f7a drm/i915/pmu: Expose a PMU interface for perf queries6f57d335b9df drm/i915: Extract intel_get_cagf
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5992/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for i915 PMU and engine busy stats (rev18)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: i915 PMU and engine busy stats (rev18)
URL : https://patchwork.freedesktop.org/series/27488/
State : failure
== Summary ==
Series 27488v18 i915 PMU and engine busy stats
https://patchwork.freedesktop.org/api/1.0/series/27488/revisions/18/mbox/
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> INCOMPLETE (fi-pnv-d510)
pass -> INCOMPLETE (fi-byt-j1900)
pass -> INCOMPLETE (fi-glk-1)fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:445s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:453s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:369s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:528s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:262s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:491s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:494s fi-byt-j1900 total:118 pass:96 dwarn:0 dfail:0 fail:0 skip:21 fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:473s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:558s fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:416s fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:250s fi-glk-1 total:118 pass:96 dwarn:0 dfail:0 fail:0 skip:21 fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:422s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:430s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:490s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:457s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:476s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:573s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:474s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:580s fi-pnv-d510 total:118 pass:76 dwarn:0 dfail:0 fail:0 skip:41 fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:444s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:646s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:520s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:491s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:455s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:562s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:420s
e4dedb9e7c81401239b67d07ed8ed07fcd2f5129 drm-tip: 2017y-10m-17d-07h-45m-57s UTC integration manifest 95bcd4c75126 drm/i915/pmu: Add RC6 residency metrics732e239cdac9 drm/i915: Convert intel_rc6_residency_us to ns1c77eab32884 drm/i915/pmu: Add interrupt count metric3d1452e467e6 drm/i915/pmu: Wire up engine busy stats to PMU8700ee5a9dd9 drm/i915: Engine busy time trackingee1a2044fdd9 drm/i915: Wrap context schedule notificationbe2753dcb505 drm/i915/pmu: Suspend sampling when GPU is idled49f49c0559f drm/i915/pmu: Expose a PMU interface for perf queries17e2471ae9e5 drm/i915: Extract intel_get_cagf
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6068/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for i915 PMU and engine busy stats (rev18)
Quoting Patchwork (2017-10-17 12:12:55)
Quoted 8 lines
== Series Details ==
Series: i915 PMU and engine busy stats (rev18)
URL : https://patchwork.freedesktop.org/series/27488/
State : failure== Summary ==
Quoted 8 lines
Series 27488v18 i915 PMU and engine busy stats
https://patchwork.freedesktop.org/api/1.0/series/27488/revisions/18/mbox/Test
gem_exec_suspend:Subgroup basic-s3: pass -> INCOMPLETE (fi-pnv-d510) pass -> INCOMPLETE (fi-byt-j1900) pass -> INCOMPLETE (fi-glk-1)
At least glk had pstore!
<6>[ 251.557743] Disabling non-boot CPUs ... <4>[ 251.576367] IRQ 127: no longer affine to CPU1 <6>[ 251.578495] smpboot: CPU 1 is now offline <4>[ 251.599991] IRQ 121: no longer affine to CPU2 <6>[ 251.602337] smpboot: CPU 2 is now offline <4>[ 251.618470] INFO: trying to register non-static key. <4>[ 251.618472] the code is fine but needs lockdep annotation. <4>[ 251.618473] turning off the locking correctness validator. <4>[ 251.618481] CPU: 3 PID: 26 Comm: cpuhp/3 Tainted: G U 4.14.0-rc5-CI-Patchwork_6068+ #1 <4>[ 251.618483] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 251.618486] Call Trace: <4>[ 251.618500] dump_stack+0x68/0x9f <4>[ 251.618507] register_lock_class+0x3fd/0x580 <4>[ 251.618515] ? __save_stack_trace+0x73/0xd0 <4>[ 251.618522] __lock_acquire+0xa4/0x1b00 <4>[ 251.618527] ? padata_cpu_prep_down+0x35/0x60 <4>[ 251.618534] ? __slab_free+0x3b4/0x540 <4>[ 251.618539] ? __this_cpu_preempt_check+0x13/0x20 <4>[ 251.618545] lock_acquire+0xb0/0x200 <4>[ 251.618548] ? lock_acquire+0xb0/0x200 <4>[ 251.618552] ? padata_cpu_prep_down+0x35/0x60 <4>[ 251.618559] __mutex_lock+0x86/0x9b0 <4>[ 251.618562] ? padata_cpu_prep_down+0x35/0x60 <4>[ 251.618566] ? padata_cpu_prep_down+0x35/0x60 <4>[ 251.618570] ? __lock_acquire+0x4ab/0x1b00 <4>[ 251.618577] mutex_lock_nested+0x1b/0x20 <4>[ 251.618581] ? mutex_lock_nested+0x1b/0x20 <4>[ 251.618584] padata_cpu_prep_down+0x35/0x60 <4>[ 251.618590] cpuhp_invoke_callback+0x161/0xbf0 <4>[ 251.618594] ? cpuhp_thread_fun+0x41/0x240 <4>[ 251.618597] ? padata_remove_cpu+0x80/0x80 <4>[ 251.618602] cpuhp_thread_fun+0x17b/0x240 <4>[ 251.618609] ? smpboot_thread_fn+0x2d/0x280 <4>[ 251.618613] smpboot_thread_fn+0x18a/0x280 <4>[ 251.618617] kthread+0x114/0x150 <4>[ 251.618621] ? sort_range+0x30/0x30 <4>[ 251.618624] ? kthread_create_on_node+0x40/0x40 <4>[ 251.618630] ret_from_fork+0x27/0x40 <3>[ 251.618696] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: ONEf+0x1741e/0xba963 <4>[ 251.618737] ------------[ cut here ]------------ <4>[ 251.618743] WARNING: CPU: 3 PID: 26 at lib/debugobjects.c:291 debug_print_object+0x76/0x80 <4>[ 251.618746] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me r8169 prime_numbers mii mei i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 251.618809] CPU: 3 PID: 26 Comm: cpuhp/3 Tainted: G U 4.14.0-rc5-CI-Patchwork_6068+ #1 <4>[ 251.618812] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 251.618816] task: ffff88017ab5cec0 task.stack: ffffc90000140000 <4>[ 251.618821] RIP: 0010:debug_print_object+0x76/0x80 <4>[ 251.618825] RSP: 0018:ffffc90000143c78 EFLAGS: 00010296 <4>[ 251.618830] RAX: 0000000000000065 RBX: ffffc90000143ca0 RCX: 0000000000000000 <4>[ 251.618833] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810ee876 <4>[ 251.618836] RBP: ffffc90000143c90 R08: 0000000000000001 R09: 0000000000000000 <4>[ 251.618839] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81e4f5e0 <4>[ 251.618843] R13: ffffffff81cc1c4b R14: ffffffff82d63ba8 R15: 0000000000000000 <4>[ 251.618847] FS: 0000000000000000(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 <4>[ 251.618850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 251.618854] CR2: 00007f830b4ddd70 CR3: 00000001733f7000 CR4: 00000000003406e0 <4>[ 251.618857] Call Trace: <4>[ 251.618865] debug_object_assert_init+0x129/0x140 <4>[ 251.618873] ? del_timer_sync+0x5/0xb0 <4>[ 251.618880] try_to_del_timer_sync+0x1f/0x70 <4>[ 251.618884] ? try_to_del_timer_sync+0x1f/0x70 <4>[ 251.618889] del_timer_sync+0x8c/0xb0 <4>[ 251.618895] padata_flush_queues+0x5a/0xc0 <4>[ 251.618901] padata_replace+0x58/0x110 <4>[ 251.618907] __padata_remove_cpu+0x82/0xb0 <4>[ 251.618913] padata_cpu_prep_down+0x40/0x60 <4>[ 251.618919] cpuhp_invoke_callback+0x161/0xbf0 <4>[ 251.618925] ? cpuhp_thread_fun+0x41/0x240 <4>[ 251.618929] ? padata_remove_cpu+0x80/0x80 <4>[ 251.618937] cpuhp_thread_fun+0x17b/0x240 <4>[ 251.618944] ? smpboot_thread_fn+0x2d/0x280 <4>[ 251.618950] smpboot_thread_fn+0x18a/0x280 <4>[ 251.618956] kthread+0x114/0x150 <4>[ 251.618961] ? sort_range+0x30/0x30 <4>[ 251.618965] ? kthread_create_on_node+0x40/0x40 <4>[ 251.618973] ret_from_fork+0x27/0x40 <4>[ 251.618983] Code: 49 89 c1 8b 43 10 8b 4b 14 4c 89 ee 4d 8b 04 24 48 c7 c7 68 1a cc 81 83 05 1f 4e 87 01 01 48 8b 14 c5 80 c8 a6 81 e8 db ee c5 ff <0f> ff eb a5 45 31 c9 eb cf 90 55 48 89 e5 41 57 41 56 41 55 41 <4>[ 251.619153] ---[ end trace b31bdc7f94776dac ]--- <4>[ 251.619178] ------------[ cut here ]------------ <4>[ 251.619186] WARNING: CPU: 3 PID: 26 at mm/vmalloc.c:245 vmalloc_to_page+0x137/0x140 <4>[ 251.619189] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me r8169 prime_numbers mii mei i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 251.619242] CPU: 3 PID: 26 Comm: cpuhp/3 Tainted: G U W 4.14.0-rc5-CI-Patchwork_6068+ #1 <4>[ 251.619245] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 251.619248] task: ffff88017ab5cec0 task.stack: ffffc90000140000 <4>[ 251.619253] RIP: 0010:vmalloc_to_page+0x137/0x140 <4>[ 251.619257] RSP: 0018:ffffc90000143d48 EFLAGS: 00010082 <4>[ 251.619262] RAX: 8000000101a001e3 RBX: ffff88017fff9a00 RCX: 8000000101a001e3 <4>[ 251.619265] RDX: 00003fffffe00000 RSI: ffff880000000000 RDI: ffff880101be3c00 <4>[ 251.619268] RBP: ffffc90000143d48 R08: 80000000000001e3 R09: ffffc000001fffff <4>[ 251.619271] R10: 000000010f11e000 R11: ffffffff811bd999 R12: ffff880101a63c00 <4>[ 251.619274] R13: ffffffff81e63c00 R14: 0000000000000287 R15: 0000000000000000 <4>[ 251.619278] FS: 0000000000000000(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 <4>[ 251.619282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 251.619285] CR2: 00007f830b4ddd70 CR3: 00000001733f7000 CR4: 00000000003406e0 <4>[ 251.619287] Call Trace: <4>[ 251.619299] free_percpu+0x120/0x290 <4>[ 251.619306] padata_replace+0x62/0x110 <4>[ 251.619312] __padata_remove_cpu+0x82/0xb0 <4>[ 251.619317] padata_cpu_prep_down+0x40/0x60 <4>[ 251.619324] cpuhp_invoke_callback+0x161/0xbf0 <4>[ 251.619329] ? cpuhp_thread_fun+0x41/0x240 <4>[ 251.619334] ? padata_remove_cpu+0x80/0x80 <4>[ 251.619341] cpuhp_thread_fun+0x17b/0x240 <4>[ 251.619348] ? smpboot_thread_fn+0x2d/0x280 <4>[ 251.619353] smpboot_thread_fn+0x18a/0x280 <4>[ 251.619359] kthread+0x114/0x150 <4>[ 251.619364] ? sort_range+0x30/0x30 <4>[ 251.619368] ? kthread_create_on_node+0x40/0x40 <4>[ 251.619376] ret_from_fork+0x27/0x40 <4>[ 251.619386] Code: 01 01 00 00 74 1b 48 c1 e0 12 48 ba 00 00 00 00 00 ea ff ff 48 c1 e8 1e 48 c1 e0 06 48 01 d0 5d c3 31 c0 5d c3 0f ff 31 c0 5d c3 <0f> ff 31 c0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 e8 b2 fe <4>[ 251.619529] ---[ end trace b31bdc7f94776dad ]--- <1>[ 251.619540] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 <1>[ 251.619550] IP: free_percpu+0x120/0x290 <6>[ 251.619554] PGD 0 P4D 0 <4>[ 251.619562] Oops: 0000 [#1] PREEMPT SMP <4>[ 251.619565] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me r8169 prime_numbers mii mei i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 251.619617] CPU: 3 PID: 26 Comm: cpuhp/3 Tainted: G U W 4.14.0-rc5-CI-Patchwork_6068+ #1 <4>[ 251.619620] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 251.619623] task: ffff88017ab5cec0 task.stack: ffffc90000140000 <4>[ 251.619628] RIP: 0010:free_percpu+0x120/0x290 <4>[ 251.619631] RSP: 0018:ffffc90000143d58 EFLAGS: 00010046 <4>[ 251.619637] RAX: 0000000000000000 RBX: ffff88017fff9a00 RCX: 8000000101a001e3 <4>[ 251.619640] RDX: 00003fffffe00000 RSI: ffff880000000000 RDI: ffff880101be3c00 <4>[ 251.619643] RBP: ffffc90000143d80 R08: 80000000000001e3 R09: ffffc000001fffff <4>[ 251.619646] R10: 000000010f11e000 R11: ffffffff811bd999 R12: ffff880101a63c00 <4>[ 251.619649] R13: ffffffff81e63c00 R14: 0000000000000287 R15: 0000000000000000 <4>[ 251.619653] FS: 0000000000000000(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 <4>[ 251.619656] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 251.619659] CR2: 0000000000000010 CR3: 00000001733f7000 CR4: 00000000003406e0 <4>[ 251.619662] Call Trace: <4>[ 251.619669] padata_replace+0x62/0x110 <4>[ 251.619675] __padata_remove_cpu+0x82/0xb0 <4>[ 251.619681] padata_cpu_prep_down+0x40/0x60 <4>[ 251.619687] cpuhp_invoke_callback+0x161/0xbf0 <4>[ 251.619692] ? cpuhp_thread_fun+0x41/0x240 <4>[ 251.619697] ? padata_remove_cpu+0x80/0x80 <4>[ 251.619704] cpuhp_thread_fun+0x17b/0x240 <4>[ 251.619711] ? smpboot_thread_fn+0x2d/0x280 <4>[ 251.619716] smpboot_thread_fn+0x18a/0x280 <4>[ 251.619722] kthread+0x114/0x150 <4>[ 251.619727] ? sort_range+0x30/0x30 <4>[ 251.619731] ? kthread_create_on_node+0x40/0x40 <4>[ 251.619739] ret_from_fork+0x27/0x40 <4>[ 251.619749] Code: 63 43 50 48 01 d0 49 39 c4 0f 83 72 ff ff ff 48 8b 15 bd 51 b7 00 4c 89 e7 65 8b 05 b3 c6 e4 7e 48 98 48 03 3c c2 e8 a0 2a 02 00 <48> 8b 58 10 48 8b 53 20 e9 49 ff ff ff 65 8b 05 94 c6 e4 7e 89 <1>[ 251.619894] RIP: free_percpu+0x120/0x290 RSP: ffffc90000143d58 <4>[ 251.619897] CR2: 0000000000000010 <4>[ 251.619903] ---[ end trace b31bdc7f94776dae ]--- <3>[ 251.729960] BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:33 <3>[ 251.729963] in_atomic(): 1, irqs_disabled(): 1, pid: 26, name: cpuhp/3 <4>[ 251.729964] INFO: lockdep is turned off. <4>[ 251.729965] irq event stamp: 2999 <4>[ 251.729970] hardirqs last enabled at (2999): [<ffffffff811fd794>] __slab_free+0x3b4/0x540 <4>[ 251.729972] hardirqs last disabled at (2998): [<ffffffff811fd4f4>] __slab_free+0x114/0x540 <4>[ 251.729975] softirqs last enabled at (2752): [<ffffffff819122d6>] __do_softirq+0x3a6/0x4ae <4>[ 251.729978] softirqs last disabled at (2727): [<ffffffff8108619e>] irq_exit+0xae/0xc0 <3>[ 251.729979] Preemption disabled at: <4>[ 251.729983] [<ffffffff811bd999>] free_percpu+0x39/0x290 <4>[ 251.729987] CPU: 3 PID: 26 Comm: cpuhp/3 Tainted: G UD W 4.14.0-rc5-CI-Patchwork_6068+ #1 <4>[ 251.729988] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 251.729989] Call Trace: <4>[ 251.729997] dump_stack+0x68/0x9f <4>[ 251.729999] ___might_sleep+0x1e5/0x240 <4>[ 251.730001] __might_sleep+0x4a/0x80 <4>[ 251.730005] exit_signals+0x24/0x2a0 <4>[ 251.730008] ? smpboot_thread_fn+0x18a/0x280 <4>[ 251.730009] do_exit+0x9a/0xca0 <4>[ 251.730011] ? kthread+0x114/0x150 <4>[ 251.730013] ? sort_range+0x30/0x30 <4>[ 251.730015] rewind_stack_do_exit+0x17/0x20 <6>[ 251.730092] note: cpuhp/3[26] exited with preempt_count 1 <2>[ 337.964669] softdog: Initiating panic <0>[ 337.964674] Kernel panic - not syncing: Software Watchdog Timer expired <0>[ 337.964698] Kernel Offset: disabled
All look like a bug you may have tickled rather than caused. Though I'd kasan for a use-after-free. But an odd mixtures of Atoms; presuming they are all the same.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx