Skip to contentSkip to conversation

drm/i915: Let's use more enum intel_dpll_id pll_id.

PATCH In review Rodrigo Vivi 2 participants 5 messages Oct 18, 2017 – Oct 20, 2017

Subsystems (2)
lore
Share & tools
lore

Rodrigo Vivi

author maintainer
#0 lore raw

PATCH 1/2 drm/i915: Let's use more enum intel_dpll_id pll_id.

No functional change expected. Just let's use this enum when possible and also same standard pll_id name so we can rework gen9+ port clock later.

---
 drivers/gpu/drm/i915/intel_ddi.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +18 -16
index adf51b328844..7a7bce706f4b 100644
@@ -1108,14 +1108,14 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
 }
 
 static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
-			       uint32_t dpll)
+			       enum intel_dpll_id pll_id)
 {
 	i915_reg_t cfgcr1_reg, cfgcr2_reg;
 	uint32_t cfgcr1_val, cfgcr2_val;
 	uint32_t p0, p1, p2, dco_freq;
 
-	cfgcr1_reg = DPLL_CFGCR1(dpll);
-	cfgcr2_reg = DPLL_CFGCR2(dpll);
+	cfgcr1_reg = DPLL_CFGCR1(pll_id);
+	cfgcr2_reg = DPLL_CFGCR2(pll_id);
 
 	cfgcr1_val = I915_READ(cfgcr1_reg);
 	cfgcr2_val = I915_READ(cfgcr2_reg);
@@ -1168,7 +1168,7 @@ static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
 }
 
 static int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv,
-			       uint32_t pll_id)
+			       enum intel_dpll_id pll_id)
 {
 	uint32_t cfgcr0, cfgcr1;
 	uint32_t p0, p1, p2, dco_freq, ref_clock;
@@ -1255,7 +1255,8 @@ static void cnl_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	int link_clock = 0;
-	uint32_t cfgcr0, pll_id;
+	uint32_t cfgcr0;
+	enum intel_dpll_id pll_id;
 
 	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
 
@@ -1308,17 +1309,18 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	int link_clock = 0;
-	uint32_t dpll_ctl1, dpll;
+	uint32_t dpll_ctl1;
+	enum intel_dpll_id pll_id;
 
-	dpll = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
+	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
 
 	dpll_ctl1 = I915_READ(DPLL_CTRL1);
 
-	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
-		link_clock = skl_calc_wrpll_link(dev_priv, dpll);
+	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
+		link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
 	} else {
-		link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll);
-		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll);
+		link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
+		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
 
 		switch (link_clock) {
 		case DPLL_CTRL1_LINK_RATE_810:
@@ -1399,17 +1401,17 @@ static void hsw_ddi_clock_get(struct intel_encoder *encoder,
 }
 
 static int bxt_calc_pll_link(struct drm_i915_private *dev_priv,
-				enum intel_dpll_id dpll)
+			     enum intel_dpll_id pll_id)
 {
 	struct intel_shared_dpll *pll;
 	struct intel_dpll_hw_state *state;
 	struct dpll clock;
 
 	/* For DDI ports we always use a shared PLL. */
-	if (WARN_ON(dpll == DPLL_ID_PRIVATE))
+	if (WARN_ON(pll_id == DPLL_ID_PRIVATE))
 		return 0;
 
-	pll = &dev_priv->shared_dplls[dpll];
+	pll = &dev_priv->shared_dplls[pll_id];
 	state = &pll->state.hw_state;
 
 	clock.m1 = 2;
@@ -1428,9 +1430,9 @@ static void bxt_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = intel_ddi_get_encoder_port(encoder);
-	uint32_t dpll = port;
+	enum intel_dpll_id pll_id = port;
 
-	pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll);
+	pipe_config->port_clock = bxt_calc_pll_link(dev_priv, pll_id);
 
 	ddi_dotclock_get(pipe_config);
 }
Signature · 6 lines
2.13.5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#1 lore raw

PATCH 2/2 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change

From: Paulo Zanoni <[email protected]>

These functions even have their own page in our spec, so extract them from cnl_set_cdclk().

v2: (By Rodrigo) Fixed inverted logic on error return of
cnl_dvfs_pre_change.

v3: Rebase on top of rps rework with pcu_lock.

---
 drivers/gpu/drm/i915/intel_cdclk.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +23 -10
index b2a6d62b71c0..f0b9ed198123 100644
@@ -1510,12 +1510,8 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
 	dev_priv->cdclk.hw.vco = vco;
 }
 
-static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+static int cnl_dvfs_pre_change(struct drm_i915_private *dev_priv)
 {
-	int cdclk = cdclk_state->cdclk;
-	int vco = cdclk_state->vco;
-	u32 val, divider, pcu_ack;
 	int ret;
 
 	mutex_lock(&dev_priv->pcu_lock);
@@ -1524,11 +1520,30 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
 				SKL_CDCLK_READY_FOR_CHANGE,
 				SKL_CDCLK_READY_FOR_CHANGE, 3);
 	mutex_unlock(&dev_priv->pcu_lock);
-	if (ret) {
+
+	if (ret)
 		DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
 			  ret);
+
+	return ret;
+}
+
+static void cnl_dvfs_post_change(struct drm_i915_private *dev_priv, int level)
+{
+	mutex_lock(&dev_priv->pcu_lock);
+	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, level);
+	mutex_unlock(&dev_priv->pcu_lock);
+}
+
+static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
+			  const struct intel_cdclk_state *cdclk_state)
+{
+	int cdclk = cdclk_state->cdclk;
+	int vco = cdclk_state->vco;
+	u32 val, divider, pcu_ack;
+
+	if (cnl_dvfs_pre_change(dev_priv))
 		return;
-	}
 
 	/* cdclk = vco / 2 / div{1,2} */
 	switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
@@ -1575,9 +1590,7 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
 	I915_WRITE(CDCLK_CTL, val);
 
 	/* inform PCU of the change */
-	mutex_lock(&dev_priv->pcu_lock);
-	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
-	mutex_unlock(&dev_priv->pcu_lock);
+	cnl_dvfs_post_change(dev_priv, pcu_ack);
 
 	intel_update_cdclk(dev_priv);
 }
Signature · 6 lines
2.13.5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Let's use more enum intel_dpll_id pll_id.

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915: Let's use more enum intel_dpll_id pll_id.
URL : https://patchwork.freedesktop.org/series/32245/
State : success

== Summary ==

Series 32245v1 series starting with [1/2] drm/i915: Let's use more enum intel_dpll_id pll_id.
https://patchwork.freedesktop.org/api/1.0/series/32245/revisions/1/mbox/

Test gem_exec_reloc:

        Subgroup basic-cpu-active:
                pass       -> FAIL       (fi-gdg-551) fdo#102582 +6

fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:439s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:450s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:370s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:532s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:262s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:497s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:496s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:491s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:480s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:415s
fi-gdg-551       total:289  pass:171  dwarn:1   dfail:0   fail:8   skip:109 time:252s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:576s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:443s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:423s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:435s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:485s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:455s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:491s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:570s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:471s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:580s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:549s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:456s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:642s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:516s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:494s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:455s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:564s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:416s

7edf6833df0ac2c6d24969d48074203bd305e623 drm-tip: 2017y-10m-18d-16h-29m-02s UTC integration manifest 8c496465cb9e drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
4d0c664dc6de drm/i915: Let's use more enum intel_dpll_id pll_id.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6095/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Let's use more enum intel_dpll_id pll_id.

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915: Let's use more enum intel_dpll_id pll_id.
URL : https://patchwork.freedesktop.org/series/32245/
State : success

== Summary ==

Test kms_setmode:

        Subgroup basic:
                pass       -> FAIL       (shard-hsw) fdo#99912
Test kms_chv_cursor_fail:
        Subgroup pipe-A-64x64-top-edge:
                skip       -> PASS       (shard-hsw)

fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912

shard-hsw total:2540 pass:1430 dwarn:0 dfail:0 fail:9 skip:1101 time:9224s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6095/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#4 lore raw
In reply to Rodrigo Vivi
Quoted 8 lines · Rodrigo Vivi

No functional change expected. Just let's use this enum when possible and also same standard pll_id name so we can rework gen9+ port clock later.

I merged this patch to dinq since it was ready and reviewed and gets code cleaner.

Although all initial DVFS series
including the patch 2 in this series is going probably to be droped in favor of Ville's dvfs version that includes atomic commit and all platforms.

Quoted 106 lines
---
 drivers/gpu/drm/i915/intel_ddi.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +18 -16
index adf51b328844..7a7bce706f4b 100644
@@ -1108,14 +1108,14 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
 }
 
 static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
-			       uint32_t dpll)
+			       enum intel_dpll_id pll_id)
 {
 	i915_reg_t cfgcr1_reg, cfgcr2_reg;
 	uint32_t cfgcr1_val, cfgcr2_val;
 	uint32_t p0, p1, p2, dco_freq;
 
-	cfgcr1_reg = DPLL_CFGCR1(dpll);
-	cfgcr2_reg = DPLL_CFGCR2(dpll);
+	cfgcr1_reg = DPLL_CFGCR1(pll_id);
+	cfgcr2_reg = DPLL_CFGCR2(pll_id);
 
 	cfgcr1_val = I915_READ(cfgcr1_reg);
 	cfgcr2_val = I915_READ(cfgcr2_reg);
@@ -1168,7 +1168,7 @@ static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
 }
 
 static int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv,
-			       uint32_t pll_id)
+			       enum intel_dpll_id pll_id)
 {
 	uint32_t cfgcr0, cfgcr1;
 	uint32_t p0, p1, p2, dco_freq, ref_clock;
@@ -1255,7 +1255,8 @@ static void cnl_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	int link_clock = 0;
-	uint32_t cfgcr0, pll_id;
+	uint32_t cfgcr0;
+	enum intel_dpll_id pll_id;
 
 	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
 
@@ -1308,17 +1309,18 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	int link_clock = 0;
-	uint32_t dpll_ctl1, dpll;
+	uint32_t dpll_ctl1;
+	enum intel_dpll_id pll_id;
 
-	dpll = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
+	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
 
 	dpll_ctl1 = I915_READ(DPLL_CTRL1);
 
-	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
-		link_clock = skl_calc_wrpll_link(dev_priv, dpll);
+	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
+		link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
 	} else {
-		link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll);
-		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll);
+		link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
+		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
 
 		switch (link_clock) {
 		case DPLL_CTRL1_LINK_RATE_810:
@@ -1399,17 +1401,17 @@ static void hsw_ddi_clock_get(struct intel_encoder *encoder,
 }
 
 static int bxt_calc_pll_link(struct drm_i915_private *dev_priv,
-				enum intel_dpll_id dpll)
+			     enum intel_dpll_id pll_id)
 {
 	struct intel_shared_dpll *pll;
 	struct intel_dpll_hw_state *state;
 	struct dpll clock;
 
 	/* For DDI ports we always use a shared PLL. */
-	if (WARN_ON(dpll == DPLL_ID_PRIVATE))
+	if (WARN_ON(pll_id == DPLL_ID_PRIVATE))
 		return 0;
 
-	pll = &dev_priv->shared_dplls[dpll];
+	pll = &dev_priv->shared_dplls[pll_id];
 	state = &pll->state.hw_state;
 
 	clock.m1 = 2;
@@ -1428,9 +1430,9 @@ static void bxt_ddi_clock_get(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = intel_ddi_get_encoder_port(encoder);
-	uint32_t dpll = port;
+	enum intel_dpll_id pll_id = port;
 
-	pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll);
+	pipe_config->port_clock = bxt_calc_pll_link(dev_priv, pll_id);
 
 	ddi_dotclock_get(pipe_config);
 }
Signature · 1 line
2.13.5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx