lib: avoid < in gtkdoc comments
Subsystems (2)
PATCH 1/3 lib: avoid < in gtkdoc comments
For reasons entirely not clear to me meson gtkdoc runs in strict xml parsing mode, whereas automake gtkdoc doesn't. And gtkdoc itself is tooooooooo dense to correctly escape this stuff.
Paper around this.
v2: {foo} instead of of tripy <foo> (Joonas)
v3: More fixups (Joonas)
--- lib/igt_aux.c | 4 ++-- lib/igt_core.c | 4 ++-- lib/igt_debugfs.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)
lib/igt_aux.c +2 -2
@@ -998,7 +998,7 @@ void igt_drop_root(void)* @var: var lookup to to enable this wait * * Waits for a key press when run interactively and when the corresponding debug -* var is set in the --interactive-debug=<var> variable. Multiple keys +* var is set in the --interactive-debug=$var variable. Multiple keys * can be specified as a comma-separated list or alternatively "all" if a wait * should happen for all cases. *
@@ -1039,7 +1039,7 @@ void igt_debug_wait_for_keypress(const char *var)* @expected: message to be printed as expected behaviour before wait for keys Y/n * * Waits for a key press when run interactively and when the corresponding debug -* var is set in the --interactive-debug=<var> variable. Multiple vars +* var is set in the --interactive-debug=$var variable. Multiple vars * can be specified as a comma-separated list or alternatively "all" if a wait * should happen for all cases. *
lib/igt_core.c +2 -2
@@ -167,10 +167,10 @@* test logic. * * - When adding a new feature test function which uses igt_skip() internally, -* use the <prefix>_require_<feature_name> naming scheme. When you +* use the {prefix}_require_{feature_name} naming scheme. When you * instead add a feature test function which returns a boolean, because your * main test logic must take different actions depending upon the feature's -* availability, then instead use the <prefix>_has_<feature_name>. +* availability, then instead use the {prefix}_has_{feature_name}. * * - As already mentioned eschew explicit error handling logic as much as * possible. If your test absolutely has to handle the error of some function
lib/igt_debugfs.c +1 -1
@@ -231,7 +231,7 @@ int igt_debugfs_dir(int device)* @mode: mode bits as used by open() * * This opens a debugfs file as a Unix file descriptor. The filename should be -* relative to the drm device's root, i.e. without "drm/<minor>". +* relative to the drm device's root, i.e. without "drm/$minor". * * Returns: * The Unix file descriptor for the debugfs file or -1 if that didn't work out.
Signature · 6 lines
2.15.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/3 meson: gtkdoc support
Bunch of neat improvements:
- xml generates correctly depend upon the test binaries
- no need to re-run autogen.sh when new chapters/functions get added, all handed by meson
Still one issue:
- the gtkdoc target doesn't depend upon the custom_target yet, hacked around using build_by_default: true
This is an issue known to upstream already:
https://github.com/mesonbuild/meson/issues/2148
v2: Bump meson version to 0.42, since that's the first release which adds the build dir when running the gtkdoc tools, and hence allows including generated files.
v2:
- Undo the bump, it's only needed for generated source files. Other generated files as input should work with 0.40 already.
- Generate version.xml from version.xml.in, which allows us to keep the &version; entity.
v3: Add github issue link.
v4:
- Resurrect lost KEYWORDS (Petri)
- Fix issue when running with a clean build, files() doesn't work on generate files (Petri).
--- docs/meson.build | 1 + .../intel-gpu-tools/generate_description_xml.sh | 46 +++++++++++++ .../intel-gpu-tools/generate_programs_xml.sh | 22 ++++++ docs/reference/intel-gpu-tools/meson.build | 80 ++++++++++++++++++++++ docs/reference/meson.build | 1 + meson.build | 3 + meson.sh | 2 +- tests/meson.build | 6 +- 8 files changed, 158 insertions(+), 3 deletions(-) create mode 100644 docs/meson.build create mode 100644 docs/reference/intel-gpu-tools/generate_description_xml.sh create mode 100755 docs/reference/intel-gpu-tools/generate_programs_xml.sh create mode 100644 docs/reference/intel-gpu-tools/meson.build create mode 100644 docs/reference/meson.build
docs/meson.build new file +1 -0
@@ -0,0 +1 @@ +subdir('reference')
docs/reference/intel-gpu-tools/generate_description_xml.sh new file +46 -0
46 lines not on this page · raw message
docs/reference/intel-gpu-tools/generate_programs_xml.sh new file +22 -0
@@ -0,0 +1,22 @@ +#!/bin/sh + +output=$1 +filter=$2 +testlist=$3 + +echo "<?xml version=\"1.0\"?>" > $output +echo "<!DOCTYPE refsect1 PUBLIC \"-//OASIS//DTD DocBook XML V4.3//EN\"" >> $output +echo " \"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd\"" >> $output +echo "[" >> $output +echo " <!ENTITY % local.common.attrib \"xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'\">" >> $output +echo " <!ENTITY version SYSTEM \"version.xml\">" >> $output +echo "]>" >> $output +echo "<refsect1>" >> $output +echo "<title>Programs</title>" >> $output +echo "<informaltable pgwide=\"1\" frame=\"none\"><tgroup cols=\"2\"><tbody>" >> $output +for test in `cat $testlist | tr ' ' '\n' | grep "^$filter" | sort`; do + echo "<row><entry role=\"program_name\">" >> $output; + echo "<link linkend=\"$test\">$test</link></entry></row>" >> $output; +done; +echo "</tbody></tgroup></informaltable>" >> $output +echo "</refsect1>" >> $output
docs/reference/intel-gpu-tools/meson.build new file +80 -0
80 lines not on this page · raw message
docs/reference/meson.build new file +1 -0
@@ -0,0 +1 @@ +subdir('intel-gpu-tools')
meson.build +3 -0
@@ -28,6 +28,8 @@ endforeach inc = include_directories('include/drm-uapi', 'lib', '.') +inc_for_gtkdoc = include_directories('lib') + config = configuration_data() libdrm = dependency('libdrm', version : '>=2.4.82')
@@ -136,3 +138,4 @@ if libdrm_intel.found() endif endif subdir('man') +subdir('docs')
meson.sh +1 -1
@@ -28,7 +28,7 @@ install uninstall: echo "meson install support not yet completed" && false docs: - echo "meson gtkdoc support not yet completed" && false + ninja -C build intel-gpu-tools-doc EOF
tests/meson.build +4 -2
@@ -257,12 +257,14 @@ endif libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-gpu-tools') +test_executables = [] + foreach prog : test_progs link = [] if prog == 'perf_pmu' link += lib_igt_perf endif - executable(prog, prog + '.c', + test_executables += executable(prog, prog + '.c', dependencies : test_deps, install_dir : libexecdir, link_with : link,
@@ -278,7 +280,7 @@ test_progs += 'testdisplay' pkgdatadir = join_paths(get_option('prefix'), get_option('datadir'), 'intel-gpu-tools') gen_testlist = find_program('generate_testlist.sh') -custom_target('testlist', +test_list = custom_target('testlist', output : 'test-list.txt', command : [ gen_testlist, '@OUTPUT@', test_progs ], install : true,
Signature · 6 lines
2.15.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t 2/3] meson: gtkdoc support
Quoted 5 lines · Daniel Vetter
Bunch of neat improvements:
- xml generates correctly depend upon the test binaries
- no need to re-runautogen.shwhen new chapters/functions get added, all handed by meson
I just rebased on top of this commit, and now my cross build takes 5 minutes as my skylake build host slowly churns through executing the ARM binaries under QEMU.
Is there anything we could do to avoid executing the built binaries during the build process?
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t 2/3] meson: gtkdoc support
Quoted 8 lines · Eric Anholt
Quoted 5 lines · Daniel Vetter
Bunch of neat improvements:
- xml generates correctly depend upon the test binaries
- no need to re-runautogen.shwhen new chapters/functions get added, all handed by meson
Quoted 6 lines
I just rebased on top of this commit, and now my cross build takes 5 minutes as my skylake build host slowly churns through executing the ARM binaries under QEMU.
Is there anything we could do to avoid executing the built binaries during the build process?
meson 0.45 will have the dependency tracking fixed for gtkdoc and will allow us to drop the always_build hack. I'll see whether we can do a version check or something like that to work around this all. -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/3 meson: build a full dependency for lib_igt_perf
In reply to Daniel Vettermeson prefers packages dependencies over passing arount static libraries, because those also include linker flags, include dirs and everything else.
While at it pull the special cases out from the common build stanzas like we do with other special cases.
Just a bit of ocd to keep everything polished.
--- benchmarks/meson.build | 9 +++------ lib/meson.build | 5 ++++- overlay/meson.build | 4 ++-- tests/meson.build | 11 +++++------ 4 files changed, 14 insertions(+), 15 deletions(-)
benchmarks/meson.build +3 -6
@@ -12,7 +12,6 @@ benchmark_progs = [ 'gem_prw', 'gem_set_domain', 'gem_syslatency', - 'gem_wsim', 'kms_vblank', 'prime_lookup', 'vgem_mmap',
@@ -31,11 +30,9 @@ endif foreach prog : benchmark_progs # FIXME meson doesn't like binaries with the same name # meanwhile just suffix with _bench - link = [] - if prog == 'gem_wsim' - link += lib_igt_perf - endif executable(prog + '_bench', prog + '.c', - link_with : link, dependencies : test_deps) endforeach + +executable('gem_wsim_bench', 'gem_wsim.c', + dependencies : test_deps + [ lib_igt_perf ])
lib/meson.build +4 -1
@@ -180,8 +180,11 @@ lib_igt = declare_dependency(link_with : lib_igt_build, igt_deps = [ lib_igt ] + lib_deps -lib_igt_perf = static_library('igt_perf', +lib_igt_perf_build = static_library('igt_perf', ['igt_perf.c'] ) +lib_igt_perf = declare_dependency(link_with : lib_igt_perf_build, + include_directories : inc) + subdir('tests')
overlay/meson.build +2 -2
@@ -21,7 +21,8 @@ dri2proto = dependency('dri2proto', version : '>= 2.6', required : false) cairo_xlib = dependency('cairo-xlib', required : false) xrandr = dependency('xrandr', version : '>=1.3', required : false) -gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, libdrm_intel ] +gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, + libdrm_intel, lib_igt_perf ] both_x11_src = ''
@@ -55,6 +56,5 @@ if xrandr.found() and cairo.found() include_directories : inc, c_args : gpu_overlay_cflags, dependencies : gpu_overlay_deps, - link_with : lib_igt_perf, install : true) endif
tests/meson.build +5 -6
@@ -190,7 +190,6 @@ test_progs = [ 'kms_vblank', 'meta_test', 'perf', - 'perf_pmu', 'pm_backlight', 'pm_lpsp', 'pm_rc6_residency',
@@ -260,17 +259,17 @@ libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-g test_executables = [] foreach prog : test_progs - link = [] - if prog == 'perf_pmu' - link += lib_igt_perf - endif test_executables += executable(prog, prog + '.c', dependencies : test_deps, install_dir : libexecdir, - link_with : link, install : true) endforeach +test_executables += executable('perf_pmu', 'perf_pmu.c', + dependencies : test_deps + [ lib_igt_perf ], + install_dir : libexecdir, + install : true) + executable('testdisplay', ['testdisplay.c', 'testdisplay_hotplug.c'], dependencies : test_deps, install_dir : libexecdir,
Signature · 6 lines
2.15.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t 3/3] meson: build a full dependency for lib_igt_perf
Quoted 105 lines · Daniel Vetter
meson prefers packages dependencies over passing arount static libraries, because those also include linker flags, include dirs and everything else.
While at it pull the special cases out from the common build stanzas like we do with other special cases.
Just a bit of ocd to keep everything polished.
Cc Tvrtko Ursulin <[email protected]>Signed-off-by Daniel Vetter <[email protected]>--- benchmarks/meson.build | 9 +++------ lib/meson.build | 5 ++++- overlay/meson.build | 4 ++-- tests/meson.build | 11 +++++------ 4 files changed, 14 insertions(+), 15 deletions(-)benchmarks/meson.build +3
-6@@ -12,7 +12,6 @@ benchmark_progs = [ 'gem_prw', 'gem_set_domain', 'gem_syslatency', - 'gem_wsim', 'kms_vblank', 'prime_lookup', 'vgem_mmap',@@ -31,11 +30,9 @@ endif foreach prog : benchmark_progs # FIXME meson doesn't like binaries with the same name # meanwhile just suffix with _bench - link = [] - if prog == 'gem_wsim' - link += lib_igt_perf - endif executable(prog + '_bench', prog + '.c', - link_with : link, dependencies : test_deps) endforeach + +executable('gem_wsim_bench', 'gem_wsim.c', + dependencies : test_deps + [ lib_igt_perf ])lib/meson.build +4
-1@@ -180,8 +180,11 @@ lib_igt = declare_dependency(link_with : lib_igt_build, igt_deps = [ lib_igt ] + lib_deps -lib_igt_perf = static_library('igt_perf', +lib_igt_perf_build = static_library('igt_perf', ['igt_perf.c'] ) +lib_igt_perf = declare_dependency(link_with : lib_igt_perf_build, + include_directories : inc) + subdir('tests')overlay/meson.build +2
-2@@ -21,7 +21,8 @@ dri2proto = dependency('dri2proto', version : '>= 2.6', required : false) cairo_xlib = dependency('cairo-xlib', required : false) xrandr = dependency('xrandr', version : '>=1.3', required : false) -gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, libdrm_intel ] +gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, + libdrm_intel, lib_igt_perf ] both_x11_src = ''@@ -55,6 +56,5 @@ if xrandr.found() and cairo.found() include_directories : inc, c_args : gpu_overlay_cflags, dependencies : gpu_overlay_deps, - link_with : lib_igt_perf, install : true) endiftests/meson.build +0
-5@@ -190,7 +190,6 @@ test_progs = [ 'kms_vblank', 'meta_test', 'perf', - 'perf_pmu', 'pm_backlight', 'pm_lpsp', 'pm_rc6_residency',@@ -260,17 +259,17 @@ libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-g test_executables = [] foreach prog : test_progs - link = [] - if prog == 'perf_pmu' - link += lib_igt_perf - endif test_executables += executable(prog, prog + '.c', dependencies : test_deps,
tests/meson.build libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-g · line 272
Quoted 10 lines
tests/meson.build +5
-1install_dir : libexecdir, - link_with : link, install : true) endforeach +test_executables += executable('perf_pmu', 'perf_pmu.c', + dependencies : test_deps + [ lib_igt_perf ], + install_dir : libexecdir, + install : true) +
I'm fairly sure I had this commit in my earlier tests for this series, but apparently not.
test_progs += 'perf_pmu'
is needed here, or perf_pmu doesn't get its place in test-list.txt.
Signature · 1 line
Petri Latvala
Quoted 10 lines
tests/meson.build +0
-0executable('testdisplay', ['testdisplay.c', 'testdisplay_hotplug.c'], dependencies : test_deps, install_dir : libexecdir,Signature · 6 lines
2.15.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Petri Latvala
Reviewed-byRe: [PATCH i-g-t 3/3] meson: build a full dependency for lib_igt_perf
Quoted 121 lines · Petri Latvala
Quoted 105 lines · Daniel Vetter
meson prefers packages dependencies over passing arount static libraries, because those also include linker flags, include dirs and everything else.
While at it pull the special cases out from the common build stanzas like we do with other special cases.
Just a bit of ocd to keep everything polished.
Cc Tvrtko Ursulin <[email protected]>Signed-off-by Daniel Vetter <[email protected]>--- benchmarks/meson.build | 9 +++------ lib/meson.build | 5 ++++- overlay/meson.build | 4 ++-- tests/meson.build | 11 +++++------ 4 files changed, 14 insertions(+), 15 deletions(-)benchmarks/meson.build +3
-6@@ -12,7 +12,6 @@ benchmark_progs = [ 'gem_prw', 'gem_set_domain', 'gem_syslatency', - 'gem_wsim', 'kms_vblank', 'prime_lookup', 'vgem_mmap',@@ -31,11 +30,9 @@ endif foreach prog : benchmark_progs # FIXME meson doesn't like binaries with the same name # meanwhile just suffix with _bench - link = [] - if prog == 'gem_wsim' - link += lib_igt_perf - endif executable(prog + '_bench', prog + '.c', - link_with : link, dependencies : test_deps) endforeach + +executable('gem_wsim_bench', 'gem_wsim.c', + dependencies : test_deps + [ lib_igt_perf ])lib/meson.build +4
-1@@ -180,8 +180,11 @@ lib_igt = declare_dependency(link_with : lib_igt_build, igt_deps = [ lib_igt ] + lib_deps -lib_igt_perf = static_library('igt_perf', +lib_igt_perf_build = static_library('igt_perf', ['igt_perf.c'] ) +lib_igt_perf = declare_dependency(link_with : lib_igt_perf_build, + include_directories : inc) + subdir('tests')overlay/meson.build +2
-2@@ -21,7 +21,8 @@ dri2proto = dependency('dri2proto', version : '>= 2.6', required : false) cairo_xlib = dependency('cairo-xlib', required : false) xrandr = dependency('xrandr', version : '>=1.3', required : false) -gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, libdrm_intel ] +gpu_overlay_deps = [ realtime, math, cairo, pciaccess, libdrm, + libdrm_intel, lib_igt_perf ] both_x11_src = ''@@ -55,6 +56,5 @@ if xrandr.found() and cairo.found() include_directories : inc, c_args : gpu_overlay_cflags, dependencies : gpu_overlay_deps, - link_with : lib_igt_perf, install : true) endiftests/meson.build +0
-5@@ -190,7 +190,6 @@ test_progs = [ 'kms_vblank', 'meta_test', 'perf', - 'perf_pmu', 'pm_backlight', 'pm_lpsp', 'pm_rc6_residency',@@ -260,17 +259,17 @@ libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-g test_executables = [] foreach prog : test_progs - link = [] - if prog == 'perf_pmu' - link += lib_igt_perf - endif test_executables += executable(prog, prog + '.c', dependencies : test_deps,tests/meson.build libexecdir = join_paths(get_option('prefix'), get_option('libexecdir'), 'intel-g · line 272
Quoted 10 lines
tests/meson.build +5
-1install_dir : libexecdir, - link_with : link, install : true) endforeach +test_executables += executable('perf_pmu', 'perf_pmu.c', + dependencies : test_deps + [ lib_igt_perf ], + install_dir : libexecdir, + install : true) +I'm fairly sure I had this commit in my earlier tests for this series, but apparently not.
Quoted 4 lines
test_progs+= 'perf_pmu'is needed here, or
perf_pmudoesn't get its place in test-list.txt.
With this fixup squashed in, the series is
The differences in the generated xml (autotools vs meson) were, let's say, cosmetic and minor.
Signature · 5 lines
Petri Latvala _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/3] lib: avoid < in gtkdoc comments
In reply to Daniel Vetter== Series Details ==
== Series Details ==
Series: series starting with [1/3] lib: avoid < in gtkdoc comments
URL : https://patchwork.freedesktop.org/series/34893/
State : success
== Summary ==
IGT patchset tested on top of latest successful build ece35d37e6b0afc0ba99f66179279960042c87bc tests/gem_seqno_wrap: Drop gem_seqno_wrap.c
with latest DRM-Tip kernel build CI_DRM_345684cd3d972bdd drm-tip: 2017y-12m-05d-08h-41m-59s UTC integration manifest
No testlist changes.
Test debugfs_test:
Subgroup read_all_entries:
dmesg-warn -> DMESG-FAIL (fi-elk-e7500) fdo#103989
Test kms_chamelium:
Subgroup dp-crc-fast:
dmesg-fail -> PASS (fi-kbl-7500u) fdo#103841
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:437s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:447s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:391s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:526s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:282s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:507s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:509s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:491s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:475s fi-elk-e7500 total:224 pass:163 dwarn:14 dfail:1 fail:0 skip:45 fi-gdg-551 total:288 pass:178 dwarn:1 dfail:0 fail:1 skip:108 time:274s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:539s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:377s fi-hsw-4770r total:288 pass:224 dwarn:0 dfail:0 fail:0 skip:64 time:258s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:399s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:480s fi-ivb-3770 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:451s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:484s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:533s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:475s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:533s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:590s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:452s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:545s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-skl-6700k total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:524s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:501s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:446s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:416s Blacklisted hosts: fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:613s fi-cnl-y total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:620s fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:492s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_598/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for series starting with [1/3] lib: avoid < in gtkdoc comments
In reply to Daniel Vetter== Series Details ==
== Series Details ==
Series: series starting with [1/3] lib: avoid < in gtkdoc comments
URL : https://patchwork.freedesktop.org/series/34893/
State : failure
== Summary ==
Test kms_flip:
Subgroup plain-flip-fb-recreate-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Test gem_eio:
Subgroup in-flight:
pass -> DMESG-FAIL (shard-snb)
Test drv_module_reload:
Subgroup basic-reload:
pass -> DMESG-WARN (shard-hsw) fdo#102707
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-offscren-pri-shrfb-draw-blt:
fail -> PASS (shard-snb) fdo#101623
Test gem_tiled_swapping:
Subgroup non-threaded:
pass -> INCOMPLETE (shard-snb) fdo#104009fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#104009 https://bugs.freedesktop.org/show_bug.cgi?id=104009
shard-hsw total:2608 pass:1492 dwarn:2 dfail:0 fail:10 skip:1103 time:9165s shard-snb total:2608 pass:1271 dwarn:1 dfail:1 fail:10 skip:1324 time:7881s Blacklisted hosts: shard-apl total:2679 pass:1680 dwarn:1 dfail:0 fail:21 skip:977 time:13721s shard-kbl total:2604 pass:1747 dwarn:4 dfail:0 fail:20 skip:833 time:10552s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_598/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx