Skip to contentSkip to conversation

4.9.68-stable review

PATCH In review Greg Kroah-Hartman 8 participants 120 messages Dec 7, 2017 – Dec 8, 2017

Subsystems (5)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/109 bcache: only permit to recovery read error when cache device is clean

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Coly Li <[email protected]>

commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream.

When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data.

For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible.

With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update.

For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch.

Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense.

Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure to
allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.

[small change to patch comment spelling by mlyle]

---
 drivers/md/bcache/request.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/md/bcache/request.c +9 -1
@@ -702,8 +702,16 @@ static void cached_dev_read_error(struct
 {
 	struct search *s = container_of(cl, struct search, cl);
 	struct bio *bio = &s->bio.bio;
+	struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
 
-	if (s->recoverable) {
+	/*
+	 * If cache device is dirty (dc->has_dirty is non-zero), then
+	 * recovery a failed read request from cached device may get a
+	 * stale data back. So read failure recovery is only permitted
+	 * when cache device is clean.
+	 */
+	if (s->recoverable &&
+	    (dc && !atomic_read(&dc->has_dirty))) {
 		/* Retry from the backing device: */
 		trace_bcache_read_retry(s->orig_bio);
 
author maintainer
#5 lore raw

PATCH 6/109 mm, oom_reaper: gather each vma to prevent leaking TLB entry

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Nan <[email protected]>

commit 687cb0884a714ff484d038e9190edc874edcf146 upstream.

tlb_gather_mmu(&tlb, mm, 0, -1) means gathering the whole virtual memory space. In this case, tlb->fullmm is true. Some archs like arm64 doesn't flush TLB when tlb->fullmm is true:

commit 5a7862e83000 ("arm64: tlbflush: avoid flushing when fullmm == 1").

Which causes leaking of tlb entries.

Will clarifies his patch:
"Basically, we tag each address space with an ASID (PCID on x86) which
is resident in the TLB. This means we can elide TLB invalidation when pulling down a full mm because we won't ever assign that ASID to another mm without doing TLB invalidation elsewhere (which actually just nukes the whole TLB).

I think that means that we could potentially not fault on a kernel uaccess, because we could hit in the TLB"

There could be a window between complete_signal() sending IPI to other cores and all threads sharing this mm are really kicked off from cores. In this window, the oom reaper may calls tlb_flush_mmu_tlbonly() to flush TLB then frees pages. However, due to the above problem, the TLB entries are not really flushed on arm64. Other threads are possible to access these pages through TLB entries. Moreover, a copy_to_user() can also write to these pages without generating page fault, causes use-after-free bugs.

This patch gathers each vma instead of gathering full vm space. In this case tlb->fullmm is not true. The behavior of oom reaper become similar to munmapping before do_exit, which should be safe for all archs.

Fixes aac453635549 ("mm, oom: introduce oom reaper")
Cc Minchan Kim <[email protected]>
Cc Will Deacon <[email protected]>
Cc Bob Liu <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Roman Gushchin <[email protected]>
Cc Konstantin Khlebnikov <[email protected]>
Cc Andrea Arcangeli <[email protected]>
[backported to 4.9 stable tree]
---
 mm/oom_kill.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
mm/oom_kill.c +4 -3
@@ -524,7 +524,6 @@ static bool __oom_reap_task_mm(struct ta
 	 */
 	set_bit(MMF_UNSTABLE, &mm->flags);
 
-	tlb_gather_mmu(&tlb, mm, 0, -1);
 	for (vma = mm->mmap ; vma; vma = vma->vm_next) {
 		if (is_vm_hugetlb_page(vma))
 			continue;
@@ -546,11 +545,13 @@ static bool __oom_reap_task_mm(struct ta
 		 * we do not want to block exit_mmap by keeping mm ref
 		 * count elevated without a good reason.
 		 */
-		if (vma_is_anonymous(vma) || !(vma->vm_flags & VM_SHARED))
+		if (vma_is_anonymous(vma) || !(vma->vm_flags & VM_SHARED)) {
+			tlb_gather_mmu(&tlb, mm, vma->vm_start, vma->vm_end);
 			unmap_page_range(&tlb, vma, vma->vm_start, vma->vm_end,
 					 &details);
+			tlb_finish_mmu(&tlb, vma->vm_start, vma->vm_end);
+		}
 	}
-	tlb_finish_mmu(&tlb, 0, -1);
 	pr_info("oom_reaper: reaped process %d (%s), now anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB\n",
 			task_pid_nr(tsk), tsk->comm,
 			K(get_mm_counter(mm, MM_ANONPAGES)),
author maintainer
#9 lore raw

PATCH 10/109 s390/runtime instrumentation: simplify task exit handling

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <[email protected]>

commit 8d9047f8b967ce6181fd824ae922978e1b055cc0 upstream.

Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed.

In addition this allows to get rid of exit_thread() in a later patch.

---
 arch/s390/include/asm/runtime_instr.h |    4 +++-
 arch/s390/kernel/process.c            |    3 +--
 arch/s390/kernel/runtime_instr.c      |   30 +++++++++++++++---------------
 3 files changed, 19 insertions(+), 18 deletions(-)
arch/s390/include/asm/runtime_instr.h +3 -1
@@ -85,6 +85,8 @@ static inline void restore_ri_cb(struct
 		load_runtime_instr_cb(&runtime_instr_empty_cb);
 }
 
-void exit_thread_runtime_instr(void);
+struct task_struct;
+
+void runtime_instr_release(struct task_struct *tsk);
 
 #endif /* _RUNTIME_INSTR_H */
arch/s390/kernel/process.c +1 -2
@@ -70,8 +70,6 @@ extern void kernel_thread_starter(void);
  */
 void exit_thread(struct task_struct *tsk)
 {
-	if (tsk == current)
-		exit_thread_runtime_instr();
 }
 
 void flush_thread(void)
@@ -84,6 +82,7 @@ void release_thread(struct task_struct *
 
 void arch_release_task_struct(struct task_struct *tsk)
 {
+	runtime_instr_release(tsk);
 }
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
arch/s390/kernel/runtime_instr.c +15 -15
@@ -18,11 +18,24 @@
 /* empty control block to disable RI by loading it */
 struct runtime_instr_cb runtime_instr_empty_cb;
 
+void runtime_instr_release(struct task_struct *tsk)
+{
+	kfree(tsk->thread.ri_cb);
+}
+
 static void disable_runtime_instr(void)
 {
-	struct pt_regs *regs = task_pt_regs(current);
+	struct task_struct *task = current;
+	struct pt_regs *regs;
 
+	if (!task->thread.ri_cb)
+		return;
+	regs = task_pt_regs(task);
+	preempt_disable();
 	load_runtime_instr_cb(&runtime_instr_empty_cb);
+	kfree(task->thread.ri_cb);
+	task->thread.ri_cb = NULL;
+	preempt_enable();
 
 	/*
 	 * Make sure the RI bit is deleted from the PSW. If the user did not
@@ -43,19 +56,6 @@ static void init_runtime_instr_cb(struct
 	cb->valid = 1;
 }
 
-void exit_thread_runtime_instr(void)
-{
-	struct task_struct *task = current;
-
-	preempt_disable();
-	if (!task->thread.ri_cb)
-		return;
-	disable_runtime_instr();
-	kfree(task->thread.ri_cb);
-	task->thread.ri_cb = NULL;
-	preempt_enable();
-}
-
 SYSCALL_DEFINE1(s390_runtime_instr, int, command)
 {
 	struct runtime_instr_cb *cb;
@@ -64,7 +64,7 @@ SYSCALL_DEFINE1(s390_runtime_instr, int,
 		return -EOPNOTSUPP;
 
 	if (command == S390_RUNTIME_INSTR_STOP) {
-		exit_thread_runtime_instr();
+		disable_runtime_instr();
 		return 0;
 	}
 
author maintainer
#11 lore raw

PATCH 12/109 ima: fix hash algorithm initialization

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boshi Wang <[email protected]>

[ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ]

The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms"
---
 security/integrity/ima/ima_main.c |    4 ++++
 1 file changed, 4 insertions(+)
security/integrity/ima/ima_main.c +4 -0
@@ -51,6 +51,8 @@ static int __init hash_setup(char *str)
 			ima_hash_algo = HASH_ALGO_SHA1;
 		else if (strncmp(str, "md5", 3) == 0)
 			ima_hash_algo = HASH_ALGO_MD5;
+		else
+			return 1;
 		goto out;
 	}
 
@@ -60,6 +62,8 @@ static int __init hash_setup(char *str)
 			break;
 		}
 	}
+	if (i == HASH_ALGO__LAST)
+		return 1;
 out:
 	hash_setup_done = 1;
 	return 1;
author maintainer
#12 lore raw

PATCH 13/109 s390/pci: do not require AIS facility

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Borntraeger <[email protected]>

[ Upstream commit 48070c73058be6de9c0d754d441ed7092dfc8f12 ]

As of today QEMU does not provide the AIS facility to its guest. This prevents Linux guests from using PCI devices as the ais facility is checked during init. As this is just a performance optimization, we can move the ais check into the code where we need it (calling the SIC instruction). This is used at initialization and on interrupt. Both places do not require any serialization, so we can simply skip the instruction.

Since we will now get all interrupts, we can also avoid the 2nd scan. As we can have multiple interrupts in parallel we might trigger spurious irqs more often for the non-AIS case but the core code can handle that.

---
 arch/s390/include/asm/pci_insn.h |    2 +-
 arch/s390/pci/pci.c              |    5 +++--
 arch/s390/pci/pci_insn.c         |    6 +++++-
 3 files changed, 9 insertions(+), 4 deletions(-)
arch/s390/include/asm/pci_insn.h +1 -1
@@ -81,6 +81,6 @@ int zpci_refresh_trans(u64 fn, u64 addr,
 int zpci_load(u64 *data, u64 req, u64 offset);
 int zpci_store(u64 data, u64 req, u64 offset);
 int zpci_store_block(const u64 *data, u64 req, u64 offset);
-void zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc);
+int zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc);
 
 #endif
arch/s390/pci/pci.c +3 -2
@@ -354,7 +354,8 @@ static void zpci_irq_handler(struct airq
 				/* End of second scan with interrupts on. */
 				break;
 			/* First scan complete, reenable interrupts. */
-			zpci_set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC);
+			if (zpci_set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC))
+				break;
 			si = 0;
 			continue;
 		}
@@ -928,7 +929,7 @@ static int __init pci_base_init(void)
 	if (!s390_pci_probe)
 		return 0;
 
-	if (!test_facility(69) || !test_facility(71) || !test_facility(72))
+	if (!test_facility(69) || !test_facility(71))
 		return 0;
 
 	rc = zpci_debug_init();
arch/s390/pci/pci_insn.c +5 -1
@@ -7,6 +7,7 @@
 #include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <asm/facility.h>
 #include <asm/pci_insn.h>
 #include <asm/pci_debug.h>
 #include <asm/processor.h>
@@ -91,11 +92,14 @@ int zpci_refresh_trans(u64 fn, u64 addr,
 }
 
 /* Set Interruption Controls */
-void zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc)
+int zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc)
 {
+	if (!test_facility(72))
+		return -EIO;
 	asm volatile (
 		"	.insn	rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n"
 		: : [ctl] "d" (ctl), [isc] "d" (isc << 27), [u] "Q" (*unused));
+	return 0;
 }
 
 /* PCI Load */
author maintainer
#21 lore raw

PATCH 22/109 usb: dwc2: Fix UDC state tracking

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Stultz <[email protected]>

[ Upstream commit ce2b21a4e5ce042c0a42c9db8fa9e0f849427d5e ]

It has been noticed that the dwc2 udc state reporting doesn't seem to work (at least on HiKey boards). Where after the initial setup, the sysfs /sys/class/udc/f72c0000.usb/state file would report "configured" no matter the state of the OTG port.

This patch adds a call so that we report to the UDC layer when the gadget device is disconnected.

This patch does depend on the previous patch ("usb: dwc2:
Improve gadget state disconnection handling") in this patch set in order to properly work.

---
 drivers/usb/dwc2/gadget.c |    2 ++
 1 file changed, 2 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

drivers/usb/dwc2/gadget.c +2 -0
@@ -2467,6 +2467,8 @@ void dwc2_hsotg_disconnect(struct dwc2_h
 
 	call_gadget(hsotg, disconnect);
 	hsotg->lx_state = DWC2_L3;
+
+	usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
 }
 
 /**
author maintainer
#22 lore raw

PATCH 23/109 usb: dwc2: Error out of dwc2_hsotg_ep_disable() if were in host mode

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Stultz <[email protected]>

[ Upstream commit 9b481092c2a31a6b630aff9c28f0145bf6683787 ]

We've found that while in host mode, using Android, if one runs the command:
stop adbd

The existing usb devices being utilized in host mode are disconnected. This is most visible with usb networking devices.

This seems to be due to adbd closing the file:
/dev/usb-ffs/adb/ep0
Which calls ffs_ep0_release() and the following backtrace:

[<ffffff800875a430>] dwc2_hsotg_ep_disable+0x148/0x150
[<ffffff800875a498>] dwc2_hsotg_udc_stop+0x60/0x110
[<ffffff8008787950>] usb_gadget_remove_driver+0x58/0x78
[<ffffff80087879e4>] usb_gadget_unregister_driver+0x74/0xe8
[<ffffff80087850c0>] unregister_gadget+0x28/0x58
[<ffffff800878511c>] unregister_gadget_item+0x2c/0x40
[<ffffff8008790ea8>] ffs_data_clear+0xe8/0xf8
[<ffffff8008790ed8>] ffs_data_reset+0x20/0x58
[<ffffff8008793218>] ffs_data_closed+0x98/0xe8
[<ffffff80087932d8>] ffs_ep0_release+0x20/0x30

Then when dwc2_hsotg_ep_disable() is called, we call kill_all_requests() which causes a bunch of the following messages:

dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode
init: Service 'adbd' (pid 1915) killed by signal 9
init: Sending signal 9 to service 'adbd' (pid 1915) process group...
init: Successfully killed process cgroup uid 0 pid 1915 in 0ms
init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:15) dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 8 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 12 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 15 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029
dwc2 f72c0000.usb: dwc2_update_urb_state_abn(): trimming xfer length

And the usb devices connected are basically hung at this point.

It seems like if we're in host mode, we probably shouldn't run the dwc2_hostg_ep_disable logic, so this patch returns an error in that case.

With this patch (along with the previous patch in this set), we avoid the mismatched interrupts and connected usb devices continue to function.

I'm not sure if some other solution would be better here, but this seems to work, so I wanted to send it out for input on what the right approach should be.

---
 drivers/usb/dwc2/gadget.c |    5 +++++
 1 file changed, 5 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

drivers/usb/dwc2/gadget.c +5 -0
@@ -3117,6 +3117,11 @@ static int dwc2_hsotg_ep_disable(struct
 		return -EINVAL;
 	}
 
+	if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
+		dev_err(hsotg->dev, "%s: called in host mode?\n", __func__);
+		return -EINVAL;
+	}
+
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
 	spin_lock_irqsave(&hsotg->lock, flags);
author maintainer
#24 lore raw

PATCH 25/109 serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aaron Sierra <[email protected]>

[ Upstream commit 0ab84da2e076948c49d36197ee7d254125c53eab ]

The upper four bits of the XR17V35x fractional divisor register (DLD) control general chip function (RS-485 direction pin polarity, multidrop mode, XON/XOFF parity check, and fast IR mode). Don't allow these bits to be clobbered when setting the baudrate.

---
 drivers/tty/serial/8250/8250_port.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_port.c +4 -1
@@ -2526,8 +2526,11 @@ static void serial8250_set_divisor(struc
 	serial_dl_write(up, quot);
 
 	/* XR17V35x UARTs have an extra fractional divisor register (DLD) */
-	if (up->port.type == PORT_XR17V35X)
+	if (up->port.type == PORT_XR17V35X) {
+		/* Preserve bits not related to baudrate; DLD[7:4]. */
+		quot_frac |= serial_port_in(port, 0x2) & 0xf0;
 		serial_port_out(port, 0x2, quot_frac);
+	}
 }
 
 static unsigned int serial8250_get_baud_rate(struct uart_port *port,
author maintainer
#26 lore raw

PATCH 27/109 EDAC, sb_edac: Fix missing break in switch

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Gustavo A. R. Silva" <[email protected]>

[ Upstream commit a8e9b186f153a44690ad0363a56716e7077ad28c ]

Add missing break statement in order to prevent the code from falling through.

---
 drivers/edac/sb_edac.c |    1 +
 1 file changed, 1 insertion(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-edac" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

drivers/edac/sb_edac.c +1 -0
@@ -2510,6 +2510,7 @@ static int ibridge_mci_bind_devs(struct
 			break;
 		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA:
 			pvt->pci_ta = pdev;
+			break;
 		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS:
 			pvt->pci_ras = pdev;
 			break;
author maintainer
#29 lore raw

PATCH 30/109 perf test attr: Fix ignored test case result

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Richter <[email protected]>

[ Upstream commit 22905582f6dd4bbd0c370fe5732c607452010c04 ]

Command perf test -v 16 (Setup struct perf_event_attr test) always reports success even if the test case fails. It works correctly if you also specify -F (for don't fork).

root@s35lp76 perf]# ./perf test -v 16
15: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-record-no-delay'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data

     (1 samples) ]

expected task=0, got 1
expected precise_ip=0, got 3
expected wakeup_events=1, got 0
FAILED './tests/attr/test-record-no-delay' - match failure test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok

The reason for the wrong error reporting is the return value of the system() library call. It is called in run_dir() file tests/attr.c and returns the exit status, in above case 0xff00.

This value is given as parameter to the exit() function which can only handle values 0-0xff.

The child process terminates with exit value of 0 and the parent does not detect any error.

This patch corrects the error reporting and prints the correct test result.

Cc Heiko Carstens <[email protected]>
Cc Hendrik Brueckner <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Thomas-Mich Richter <[email protected]>

LPU-Reference: [email protected]

---
 tools/perf/tests/attr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/tests/attr.c +1 -1
@@ -150,7 +150,7 @@ static int run_dir(const char *d, const
 	snprintf(cmd, 3*PATH_MAX, PYTHON " %s/attr.py -d %s/attr/ -p %s %.*s",
 		 d, d, perf, vcnt, v);
 
-	return system(cmd);
+	return system(cmd) ? TEST_FAIL : TEST_OK;
 }
 
 int test__attr(int subtest __maybe_unused)
author maintainer
#30 lore raw

PATCH 31/109 kprobes/x86: Disable preemption in ftrace-based jprobes

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <[email protected]>

[ Upstream commit 5bb4fc2d8641219732eb2bb654206775a4219aca ]

Disable preemption in ftrace-based jprobe handlers as described in Documentation/kprobes.txt:

"Probe handlers are run with preemption disabled."

This will fix jprobes behavior when CONFIG_PREEMPT=y.

Cc Alexei Starovoitov <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Ananth N Mavinakayanahalli <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Paul E . McKenney <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Steven Rostedt <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/x86/kernel/kprobes/ftrace.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
arch/x86/kernel/kprobes/ftrace.c +14 -9
@@ -26,7 +26,7 @@
 #include "common.h"
 
 static nokprobe_inline
-int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+void __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
 		      struct kprobe_ctlblk *kcb, unsigned long orig_ip)
 {
 	/*
@@ -41,20 +41,21 @@ int __skip_singlestep(struct kprobe *p,
 	__this_cpu_write(current_kprobe, NULL);
 	if (orig_ip)
 		regs->ip = orig_ip;
-	return 1;
 }
 
 int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
 		    struct kprobe_ctlblk *kcb)
 {
-	if (kprobe_ftrace(p))
-		return __skip_singlestep(p, regs, kcb, 0);
-	else
-		return 0;
+	if (kprobe_ftrace(p)) {
+		__skip_singlestep(p, regs, kcb, 0);
+		preempt_enable_no_resched();
+		return 1;
+	}
+	return 0;
 }
 NOKPROBE_SYMBOL(skip_singlestep);
 
-/* Ftrace callback handler for kprobes */
+/* Ftrace callback handler for kprobes -- called under preepmt disabed */
 void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 			   struct ftrace_ops *ops, struct pt_regs *regs)
 {
@@ -77,13 +78,17 @@ void kprobe_ftrace_handler(unsigned long
 		/* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
 		regs->ip = ip + sizeof(kprobe_opcode_t);
 
+		/* To emulate trap based kprobes, preempt_disable here */
+		preempt_disable();
 		__this_cpu_write(current_kprobe, p);
 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-		if (!p->pre_handler || !p->pre_handler(p, regs))
+		if (!p->pre_handler || !p->pre_handler(p, regs)) {
 			__skip_singlestep(p, regs, kcb, orig_ip);
+			preempt_enable_no_resched();
+		}
 		/*
 		 * If pre_handler returns !0, it sets regs->ip and
-		 * resets current kprobe.
+		 * resets current kprobe, and keep preempt count +1.
 		 */
 	}
 end:
author maintainer
#31 lore raw

PATCH 34/109 dax: Avoid page invalidation races and unnecessary radix tree traversals

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

[ Upstream commit e3fce68cdbed297d927e993b3ea7b8b1cee545da ]

Currently dax_iomap_rw() takes care of invalidating page tables and evicting hole pages from the radix tree when write(2) to the file happens. This invalidation is only necessary when there is some block allocation resulting from write(2). Furthermore in current place the invalidation is racy wrt page fault instantiating a hole page just after we have invalidated it.

So perform the page invalidation inside dax_iomap_actor() where we can do it only when really necessary and after blocks have been allocated so nobody will be instantiating new hole pages anymore.

---
 fs/dax.c |   28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)
fs/dax.c +11 -17
@@ -1265,6 +1265,17 @@ iomap_dax_actor(struct inode *inode, lof
 	if (WARN_ON_ONCE(iomap->type != IOMAP_MAPPED))
 		return -EIO;
 
+	/*
+	 * Write can allocate block for an area which has a hole page mapped
+	 * into page tables. We have to tear down these mappings so that data
+	 * written by write(2) is visible in mmap.
+	 */
+	if ((iomap->flags & IOMAP_F_NEW) && inode->i_mapping->nrpages) {
+		invalidate_inode_pages2_range(inode->i_mapping,
+					      pos >> PAGE_SHIFT,
+					      (end - 1) >> PAGE_SHIFT);
+	}
+
 	while (pos < end) {
 		unsigned offset = pos & (PAGE_SIZE - 1);
 		struct blk_dax_ctl dax = { 0 };
@@ -1329,23 +1340,6 @@ iomap_dax_rw(struct kiocb *iocb, struct
 	if (iov_iter_rw(iter) == WRITE)
 		flags |= IOMAP_WRITE;
 
-	/*
-	 * Yes, even DAX files can have page cache attached to them:  A zeroed
-	 * page is inserted into the pagecache when we have to serve a write
-	 * fault on a hole.  It should never be dirtied and can simply be
-	 * dropped from the pagecache once we get real data for the page.
-	 *
-	 * XXX: This is racy against mmap, and there's nothing we can do about
-	 * it. We'll eventually need to shift this down even further so that
-	 * we can check if we allocated blocks over a hole first.
-	 */
-	if (mapping->nrpages) {
-		ret = invalidate_inode_pages2_range(mapping,
-				pos >> PAGE_SHIFT,
-				(pos + iov_iter_count(iter) - 1) >> PAGE_SHIFT);
-		WARN_ON_ONCE(ret);
-	}
-
 	while (iov_iter_count(iter)) {
 		ret = iomap_apply(inode, pos, iov_iter_count(iter), flags, ops,
 				iter, iomap_dax_actor);
author maintainer
#32 lore raw

PATCH 35/109 net/mlx4_en: Fix type mismatch for 32-bit systems

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Slava Shwartsman <[email protected]>

[ Upstream commit 61b6034c6cfdcb265bb453505c3d688e7567727a ]

is_power_of_2 expects unsigned long and we pass u64 max_val_cycles, this will be truncated on 32 bit systems, and the result is not what we were expecting.
div_u64 expects u32 as a second argument and we pass max_val_cycles_rounded which is u64 hence it will always be truncated. Fix was tested on both 64 and 32 bit systems and got same results for max_val_cycles and max_val_cycles_rounded.

Fixes 4850cf458157 ("net/mlx4_en: Resolve dividing by zero in 32-bit system")
---
 drivers/net/ethernet/mellanox/mlx4/en_clock.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx4/en_clock.c +2 -6
@@ -251,13 +251,9 @@ static u32 freq_to_shift(u16 freq)
 {
 	u32 freq_khz = freq * 1000;
 	u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
-	u64 tmp_rounded =
-		roundup_pow_of_two(max_val_cycles) > max_val_cycles ?
-		roundup_pow_of_two(max_val_cycles) - 1 : UINT_MAX;
-	u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ?
-		max_val_cycles : tmp_rounded;
+	u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1);
 	/* calculate max possible multiplier in order to fit in 64bit */
-	u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded);
+	u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded);
 
 	/* This comes from the reverse of clocksource_khz2mult */
 	return ilog2(div_u64(max_mul * freq_khz, 1000000));
author maintainer
#33 lore raw

PATCH 36/109 l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Guillaume Nault <[email protected]>

[ Upstream commit a9b2dff80be979432484afaf7f8d8e73f9e8838a ]

For connected sockets, __l2tp_ip{,6}_bind_lookup() needs to check the remote IP when looking for a matching socket. Otherwise a connected socket can receive traffic not originating from its peer.

Drop l2tp_ip_bind_lookup() and l2tp_ip6_bind_lookup() instead of updating their prototype, as these functions aren't used.

---
 net/l2tp/l2tp_ip.c  |   19 ++++++-------------
 net/l2tp/l2tp_ip6.c |   20 ++++++--------------
 2 files changed, 12 insertions(+), 27 deletions(-)
net/l2tp/l2tp_ip.c +6 -13
@@ -48,7 +48,8 @@ static inline struct l2tp_ip_sock *l2tp_
 	return (struct l2tp_ip_sock *)sk;
 }
 
-static struct sock *__l2tp_ip_bind_lookup(struct net *net, __be32 laddr, int dif, u32 tunnel_id)
+static struct sock *__l2tp_ip_bind_lookup(const struct net *net, __be32 laddr,
+					  __be32 raddr, int dif, u32 tunnel_id)
 {
 	struct sock *sk;
 
@@ -62,6 +63,7 @@ static struct sock *__l2tp_ip_bind_looku
 		if ((l2tp->conn_id == tunnel_id) &&
 		    net_eq(sock_net(sk), net) &&
 		    !(inet->inet_rcv_saddr && inet->inet_rcv_saddr != laddr) &&
+		    (!inet->inet_daddr || !raddr || inet->inet_daddr == raddr) &&
 		    (!sk->sk_bound_dev_if || !dif ||
 		     sk->sk_bound_dev_if == dif))
 			goto found;
@@ -72,15 +74,6 @@ found:
 	return sk;
 }
 
-static inline struct sock *l2tp_ip_bind_lookup(struct net *net, __be32 laddr, int dif, u32 tunnel_id)
-{
-	struct sock *sk = __l2tp_ip_bind_lookup(net, laddr, dif, tunnel_id);
-	if (sk)
-		sock_hold(sk);
-
-	return sk;
-}
-
 /* When processing receive frames, there are two cases to
  * consider. Data frames consist of a non-zero session-id and an
  * optional cookie. Control frames consist of a regular L2TP header
@@ -186,8 +179,8 @@ pass_up:
 		struct iphdr *iph = (struct iphdr *) skb_network_header(skb);
 
 		read_lock_bh(&l2tp_ip_lock);
-		sk = __l2tp_ip_bind_lookup(net, iph->daddr, inet_iif(skb),
-					   tunnel_id);
+		sk = __l2tp_ip_bind_lookup(net, iph->daddr, iph->saddr,
+					   inet_iif(skb), tunnel_id);
 		if (!sk) {
 			read_unlock_bh(&l2tp_ip_lock);
 			goto discard;
@@ -289,7 +282,7 @@ static int l2tp_ip_bind(struct sock *sk,
 		inet->inet_saddr = 0;  /* Use device */
 
 	write_lock_bh(&l2tp_ip_lock);
-	if (__l2tp_ip_bind_lookup(net, addr->l2tp_addr.s_addr,
+	if (__l2tp_ip_bind_lookup(net, addr->l2tp_addr.s_addr, 0,
 				  sk->sk_bound_dev_if, addr->l2tp_conn_id)) {
 		write_unlock_bh(&l2tp_ip_lock);
 		ret = -EADDRINUSE;
net/l2tp/l2tp_ip6.c +6 -14
@@ -59,12 +59,14 @@ static inline struct l2tp_ip6_sock *l2tp
 
 static struct sock *__l2tp_ip6_bind_lookup(struct net *net,
 					   struct in6_addr *laddr,
+					   const struct in6_addr *raddr,
 					   int dif, u32 tunnel_id)
 {
 	struct sock *sk;
 
 	sk_for_each_bound(sk, &l2tp_ip6_bind_table) {
 		const struct in6_addr *sk_laddr = inet6_rcv_saddr(sk);
+		const struct in6_addr *sk_raddr = &sk->sk_v6_daddr;
 		struct l2tp_ip6_sock *l2tp = l2tp_ip6_sk(sk);
 
 		if (l2tp == NULL)
@@ -73,6 +75,7 @@ static struct sock *__l2tp_ip6_bind_look
 		if ((l2tp->conn_id == tunnel_id) &&
 		    net_eq(sock_net(sk), net) &&
 		    (!sk_laddr || ipv6_addr_any(sk_laddr) || ipv6_addr_equal(sk_laddr, laddr)) &&
+		    (!raddr || ipv6_addr_any(sk_raddr) || ipv6_addr_equal(sk_raddr, raddr)) &&
 		    (!sk->sk_bound_dev_if || !dif ||
 		     sk->sk_bound_dev_if == dif))
 			goto found;
@@ -83,17 +86,6 @@ found:
 	return sk;
 }
 
-static inline struct sock *l2tp_ip6_bind_lookup(struct net *net,
-						struct in6_addr *laddr,
-						int dif, u32 tunnel_id)
-{
-	struct sock *sk = __l2tp_ip6_bind_lookup(net, laddr, dif, tunnel_id);
-	if (sk)
-		sock_hold(sk);
-
-	return sk;
-}
-
 /* When processing receive frames, there are two cases to
  * consider. Data frames consist of a non-zero session-id and an
  * optional cookie. Control frames consist of a regular L2TP header
@@ -200,8 +192,8 @@ pass_up:
 		struct ipv6hdr *iph = ipv6_hdr(skb);
 
 		read_lock_bh(&l2tp_ip6_lock);
-		sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, inet6_iif(skb),
-					    tunnel_id);
+		sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, &iph->saddr,
+					    inet6_iif(skb), tunnel_id);
 		if (!sk) {
 			read_unlock_bh(&l2tp_ip6_lock);
 			goto discard;
@@ -339,7 +331,7 @@ static int l2tp_ip6_bind(struct sock *sk
 	rcu_read_unlock();
 
 	write_lock_bh(&l2tp_ip6_lock);
-	if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, bound_dev_if,
+	if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, NULL, bound_dev_if,
 				   addr->l2tp_conn_id)) {
 		write_unlock_bh(&l2tp_ip6_lock);
 		err = -EADDRINUSE;
author maintainer
#50 lore raw

PATCH 42/109 net: systemport: Pad packet before inserting TSB

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <[email protected]>

[ Upstream commit 38e5a85562a6cd911fc26d951d576551a688574c ]

Inserting the TSB means adding an extra 8 bytes in front the of packet that is going to be used as metadata information by the TDMA engine, but stripped off, so it does not really help with the packet padding.

For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP) we can end-up padding them after the TSB insertion, thus making them 64 bytes, but with the TDMA stripping off the first 8 bytes, they could still be smaller than 64 bytes which is required to ingress the switch.

Fix this by swapping the padding and TSB insertion, guaranteeing that the packets have the right sizes.

Fixes 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
---
 drivers/net/ethernet/broadcom/bcmsysport.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/net/ethernet/broadcom/bcmsysport.c +9 -9
@@ -1023,15 +1023,6 @@ static netdev_tx_t bcm_sysport_xmit(stru
 		goto out;
 	}
 
-	/* Insert TSB and checksum infos */
-	if (priv->tsb_en) {
-		skb = bcm_sysport_insert_tsb(skb, dev);
-		if (!skb) {
-			ret = NETDEV_TX_OK;
-			goto out;
-		}
-	}
-
 	/* The Ethernet switch we are interfaced with needs packets to be at
 	 * least 64 bytes (including FCS) otherwise they will be discarded when
 	 * they enter the switch port logic. When Broadcom tags are enabled, we
@@ -1044,6 +1035,15 @@ static netdev_tx_t bcm_sysport_xmit(stru
 		goto out;
 	}
 
+	/* Insert TSB and checksum infos */
+	if (priv->tsb_en) {
+		skb = bcm_sysport_insert_tsb(skb, dev);
+		if (!skb) {
+			ret = NETDEV_TX_OK;
+			goto out;
+		}
+	}
+
 	skb_len = skb->len;
 
 	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
author maintainer
#51 lore raw

PATCH 43/109 ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adam Ford <[email protected]>

[ Upstream commit a3ac350793d90d1da631c8beeee9352387974ed5 ]

Commit 485fa1261f78 ("ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth") set the wrong baud rate for the UART. The Baud rate was 300,000 and it should be 3,000,000 for WL1283.

---
 arch/arm/mach-omap2/pdata-quirks.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/pdata-quirks.c +1 -1
@@ -147,7 +147,7 @@ static struct ti_st_plat_data wilink_pda
 	.nshutdown_gpio = 137,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
-	.baud_rate = 300000,
+	.baud_rate = 3000000,
 };
 
 static struct platform_device wl18xx_device = {
author maintainer
#52 lore raw

PATCH 44/109 ARM: OMAP1: DMA: Correct the number of logical channels

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 657279778af54f35e54b07b6687918f254a2992c ]

OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels. OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels available.

The wired 17 for the lch_count must have been used to cover the 16 + 1 dedicated LCD channel, in reality we can only use 9 or 16 channels.

The d->chan_count is not used by the omap-dma stack, so we can skip the setup. chan_count was configured to the number of logical channels and not the actual number of physical channels anyways.

---
 arch/arm/mach-omap1/dma.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
arch/arm/mach-omap1/dma.c +7 -9
@@ -32,7 +32,6 @@
 #include "soc.h"
 
 #define OMAP1_DMA_BASE			(0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
 
 static u32 enable_1510_mode;
 
@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(
 		goto exit_iounmap;
 	}
 
-	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
-
 	/* Valid attributes for omap1 plus processors */
 	if (cpu_is_omap15xx())
 		d->dev_caps = ENABLE_1510_MODE;
@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(
 	d->dev_caps		|= CLEAR_CSR_ON_READ;
 	d->dev_caps		|= IS_WORD_16;
 
-	if (cpu_is_omap15xx())
-		d->chan_count = 9;
-	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-		if (!(d->dev_caps & ENABLE_1510_MODE))
-			d->chan_count = 16;
+	/* available logical channels */
+	if (cpu_is_omap15xx()) {
+		d->lch_count = 9;
+	} else {
+		if (d->dev_caps & ENABLE_1510_MODE)
+			d->lch_count = 9;
 		else
-			d->chan_count = 9;
+			d->lch_count = 16;
 	}
 
 	p = dma_plat_info;
author maintainer
#53 lore raw

PATCH 45/109 vti6: fix device register to report IFLA_INFO_KIND

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Forster <[email protected]>

[ Upstream commit 93e246f783e6bd1bc64fdfbfe68b18161f69b28e ]

vti6 interface is registered before the rtnl_link_ops block is attached. As a result the resulting RTM_NEWLINK is missing IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix.

---
 net/ipv6/ip6_vti.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv6/ip6_vti.c +1 -1
@@ -189,12 +189,12 @@ static int vti6_tnl_create2(struct net_d
 	struct vti6_net *ip6n = net_generic(net, vti6_net_id);
 	int err;
 
+	dev->rtnl_link_ops = &vti6_link_ops;
 	err = register_netdevice(dev);
 	if (err < 0)
 		goto out;
 
 	strcpy(t->parms.name, dev->name);
-	dev->rtnl_link_ops = &vti6_link_ops;
 
 	dev_hold(dev);
 	vti6_tnl_link(ip6n, t);
author maintainer
#54 lore raw

PATCH 46/109 be2net: fix accesses to unicast list

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <[email protected]>

[ Upstream commit 1d0f110a2c6c4bca3dbcc4b0e27f1e3dc2d44a2c ]

Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken.

Cc Sathya Perla <[email protected]>
Cc Ajit Khaparde <[email protected]>
Cc Sriharsha Basavapatna <[email protected]>
Cc Somnath Kotur <[email protected]>
Fixes 988d44b be2net: Avoid redundant addition of mac address in HW
---
 drivers/net/ethernet/emulex/benet/be_main.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +3 -6
@@ -275,8 +275,7 @@ static int be_dev_mac_add(struct be_adap
 
 	/* Check if mac has already been added as part of uc-list */
 	for (i = 0; i < adapter->uc_macs; i++) {
-		if (ether_addr_equal((u8 *)&adapter->uc_list[i * ETH_ALEN],
-				     mac)) {
+		if (ether_addr_equal(adapter->uc_list[i].mac, mac)) {
 			/* mac already added, skip addition */
 			adapter->pmac_id[0] = adapter->pmac_id[i + 1];
 			return 0;
@@ -1679,14 +1678,12 @@ static void be_clear_mc_list(struct be_a
 
 static int be_uc_mac_add(struct be_adapter *adapter, int uc_idx)
 {
-	if (ether_addr_equal((u8 *)&adapter->uc_list[uc_idx * ETH_ALEN],
-			     adapter->dev_mac)) {
+	if (ether_addr_equal(adapter->uc_list[uc_idx].mac, adapter->dev_mac)) {
 		adapter->pmac_id[uc_idx + 1] = adapter->pmac_id[0];
 		return 0;
 	}
 
-	return be_cmd_pmac_add(adapter,
-			       (u8 *)&adapter->uc_list[uc_idx * ETH_ALEN],
+	return be_cmd_pmac_add(adapter, adapter->uc_list[uc_idx].mac,
 			       adapter->if_handle,
 			       &adapter->pmac_id[uc_idx + 1], 0);
 }
author maintainer
#57 lore raw

PATCH 49/109 libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <[email protected]>

[ Upstream commit 75422726b0f717d67db3283c2eb5bc14fa2619c5 ]

Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that even if called from a weird context the internal filesystem will be considered to be in the intial user namespace.

Luis Ressel reported that the the failure to pass MS_KERNMOUNT into mount_pseudo broke his in development graphics driver that uses the generic drm infrastructure. I am not certain the deriver was bug free in it's usage of that infrastructure but since mount_pseudo_xattr can never be triggered by userspace it is clearer and less error prone, and less problematic for the code to be explicit.

---
 fs/libfs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/libfs.c +2 -1
@@ -245,7 +245,8 @@ struct dentry *mount_pseudo_xattr(struct
 	struct inode *root;
 	struct qstr d_name = QSTR_INIT(name, strlen(name));
 
-	s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL);
+	s = sget_userns(fs_type, NULL, set_anon_super, MS_KERNMOUNT|MS_NOUSER,
+			&init_user_ns, NULL);
 	if (IS_ERR(s))
 		return ERR_CAST(s);
 
author maintainer
#58 lore raw

PATCH 50/109 net: qrtr: Mark buf as little endian

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <[email protected]>

[ Upstream commit 3512a1ad56174308a9fd3e10f4b1e3e152e9ec01 ]

Failure to mark this pointer as __le32 causes checkers like sparse to complain:

net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:274:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:274:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:275:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:275:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:276:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:276:16: got restricted __le32 [usertype] <noident>

Silence it.

---
 net/qrtr/qrtr.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/qrtr/qrtr.c +2 -2
@@ -252,7 +252,7 @@ static struct sk_buff *qrtr_alloc_resume
 	const int pkt_len = 20;
 	struct qrtr_hdr *hdr;
 	struct sk_buff *skb;
-	u32 *buf;
+	__le32 *buf;
 
 	skb = alloc_skb(QRTR_HDR_SIZE + pkt_len, GFP_KERNEL);
 	if (!skb)
@@ -269,7 +269,7 @@ static struct sk_buff *qrtr_alloc_resume
 	hdr->dst_node_id = cpu_to_le32(dst_node);
 	hdr->dst_port_id = cpu_to_le32(QRTR_PORT_CTRL);
 
-	buf = (u32 *)skb_put(skb, pkt_len);
+	buf = (__le32 *)skb_put(skb, pkt_len);
 	memset(buf, 0, pkt_len);
 	buf[0] = cpu_to_le32(QRTR_TYPE_RESUME_TX);
 	buf[1] = cpu_to_le32(src_node);
author maintainer
#61 lore raw

PATCH 53/109 ravb: Remove Rx overflow log messages

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kazuya Mizuguchi <[email protected]>

[ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ]

Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows.

Fixes c156633f1353 ("Renesas Ethernet AVB driver proper")
[simon: reworked changelog]
---
 drivers/net/ethernet/renesas/ravb_main.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/net/ethernet/renesas/ravb_main.c +2 -6
@@ -941,14 +941,10 @@ static int ravb_poll(struct napi_struct
 	/* Receive error message handling */
 	priv->rx_over_errors =  priv->stats[RAVB_BE].rx_over_errors;
 	priv->rx_over_errors += priv->stats[RAVB_NC].rx_over_errors;
-	if (priv->rx_over_errors != ndev->stats.rx_over_errors) {
+	if (priv->rx_over_errors != ndev->stats.rx_over_errors)
 		ndev->stats.rx_over_errors = priv->rx_over_errors;
-		netif_err(priv, rx_err, ndev, "Receive Descriptor Empty\n");
-	}
-	if (priv->rx_fifo_errors != ndev->stats.rx_fifo_errors) {
+	if (priv->rx_fifo_errors != ndev->stats.rx_fifo_errors)
 		ndev->stats.rx_fifo_errors = priv->rx_fifo_errors;
-		netif_err(priv, rx_err, ndev, "Receive FIFO Overflow\n");
-	}
 out:
 	return budget - quota;
 }
author maintainer
#63 lore raw

PATCH 55/109 drm/exynos/decon5433: update shadow registers iff there are active windows

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <[email protected]>

[ Upstream commit f65a7c9cb3770ed4d3e7c57c66d7032689081b5e ]

Improper usage of DECON_UPDATE register leads to subtle errors. If it set in decon_commit when there are no active windows it results in slow registry updates - all subsequent shadow registry updates takes more than full vblank. On the other side if it is not set when there are active windows it results in garbage on the screen after suspend/resume of FB console.

The patch hopefully fixes it.

---
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/exynos/exynos5433_drm_decon.c +3 -4
@@ -188,8 +188,6 @@ static void decon_commit(struct exynos_d
 
 	/* enable output and display signal */
 	decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0);
-
-	decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
 }
 
 static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
@@ -340,8 +338,9 @@ static void decon_atomic_flush(struct ex
 	for (i = ctx->first_win; i < WINDOWS_NR; i++)
 		decon_shadow_protect_win(ctx, i, false);
 
-	/* standalone update */
-	decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
+	/* update iff there are active windows */
+	if (crtc->base.state->plane_mask)
+		decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
 
 	if (ctx->out_type & IFTYPE_I80)
 		set_bit(BIT_WIN_UPDATED, &ctx->flags);
author maintainer
#64 lore raw

PATCH 56/109 drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <[email protected]>

[ Upstream commit 821b40b79db7dedbfe15ab330dfd181e661a533f ]

STANDALONE_UPDATE_F should be set if something changed in plane configurations, including plane disable.
The patch fixes page-faults bugs, caused by decon still using framebuffers of disabled planes.

v2: fixed clear-bit code (Thx Marek)
v3: use test_and_clear_bit (Thx Joonyoung)

---
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/gpu/drm/exynos/exynos5433_drm_decon.c +5 -3
@@ -46,7 +46,8 @@ enum decon_flag_bits {
 	BIT_CLKS_ENABLED,
 	BIT_IRQS_ENABLED,
 	BIT_WIN_UPDATED,
-	BIT_SUSPENDED
+	BIT_SUSPENDED,
+	BIT_REQUEST_UPDATE
 };
 
 struct decon_context {
@@ -313,6 +314,7 @@ static void decon_update_plane(struct ex
 
 	/* window enable */
 	decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, ~0);
+	set_bit(BIT_REQUEST_UPDATE, &ctx->flags);
 }
 
 static void decon_disable_plane(struct exynos_drm_crtc *crtc,
@@ -325,6 +327,7 @@ static void decon_disable_plane(struct e
 		return;
 
 	decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0);
+	set_bit(BIT_REQUEST_UPDATE, &ctx->flags);
 }
 
 static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
@@ -338,8 +341,7 @@ static void decon_atomic_flush(struct ex
 	for (i = ctx->first_win; i < WINDOWS_NR; i++)
 		decon_shadow_protect_win(ctx, i, false);
 
-	/* update iff there are active windows */
-	if (crtc->base.state->plane_mask)
+	if (test_and_clear_bit(BIT_REQUEST_UPDATE, &ctx->flags))
 		decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
 
 	if (ctx->out_type & IFTYPE_I80)
author maintainer
#68 lore raw

PATCH 60/109 perf/x86/intel: Account interrupts for PEBS errors

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <[email protected]>

[ Upstream commit 475113d937adfd150eb82b5e2c5507125a68e7af ]

It's possible to set up PEBS events to get only errors and not any data, like on SNB-X (model 45) and IVB-EP (model 62) via 2 perf commands running simultaneously:

taskset -c 1 ./perf record -c 4 -e branches:pp -j any -C 10

This leads to a soft lock up, because the error path of the intel_pmu_drain_pebs_nhm() does not account event->hw.interrupt for error PEBS interrupts, so in case you're getting ONLY errors you don't have a way to stop the event when it's over the max_samples_per_tick limit:

NMI watchdog: BUG: soft lockup - CPU#22 stuck for 22s! [perf_fuzzer:5816]
...

  RIP: 0010:[<ffffffff81159232>]  [<ffffffff81159232>] smp_call_function_single+0xe2/0x140
  ...
  Call Trace:
   ? trace_hardirqs_on_caller+0xf5/0x1b0
   ? perf_cgroup_attach+0x70/0x70
   perf_install_in_context+0x199/0x1b0
   ? ctx_resched+0x90/0x90
   SYSC_perf_event_open+0x641/0xf90
   SyS_perf_event_open+0x9/0x10
   do_syscall_64+0x6c/0x1f0
   entry_SYSCALL64_slow_path+0x25/0x25

Add perf_event_account_interrupt() which does the interrupt and frequency checks and call it from intel_pmu_drain_pebs_nhm()'s error path.

We keep the pending_kill and pending_wakeup logic only in the __perf_event_overflow() path, because they make sense only if there's any data to deliver.

Cc Alexander Shishkin <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vince Weaver <[email protected]>
Cc Vince Weaver <[email protected]>
---
 arch/x86/events/intel/ds.c |    6 ++++-
 include/linux/perf_event.h |    1 
 kernel/events/core.c       |   47 +++++++++++++++++++++++++++++----------------
 3 files changed, 37 insertions(+), 17 deletions(-)
arch/x86/events/intel/ds.c +5 -1
@@ -1389,9 +1389,13 @@ static void intel_pmu_drain_pebs_nhm(str
 			continue;
 
 		/* log dropped samples number */
-		if (error[bit])
+		if (error[bit]) {
 			perf_log_lost_samples(event, error[bit]);
 
+			if (perf_event_account_interrupt(event))
+				x86_pmu_stop(event, 0);
+		}
+
 		if (counts[bit]) {
 			__intel_pmu_pebs_event(event, iregs, base,
 					       top, bit, counts[bit]);
include/linux/perf_event.h +1 -0
@@ -1259,6 +1259,7 @@ extern void perf_event_disable(struct pe
 extern void perf_event_disable_local(struct perf_event *event);
 extern void perf_event_disable_inatomic(struct perf_event *event);
 extern void perf_event_task_tick(void);
+extern int perf_event_account_interrupt(struct perf_event *event);
 #else /* !CONFIG_PERF_EVENTS: */
 static inline void *
 perf_aux_output_begin(struct perf_output_handle *handle,
kernel/events/core.c +31 -16

62 lines not on this page · raw message

author maintainer
#71 lore raw

PATCH 64/109 drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <[email protected]>

[ Upstream commit 11d8bcef7a0399e1d2519f207fd575fc404306b4 ]

DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does not start. This change is neutral for DECON.

---
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/exynos/exynos5433_drm_decon.c +2 -0
@@ -189,6 +189,8 @@ static void decon_commit(struct exynos_d
 
 	/* enable output and display signal */
 	decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0);
+
+	decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
 }
 
 static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
author maintainer
#75 lore raw

PATCH 69/109 RDMA/qedr: Return success when not changing QP state

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ram Amrani <[email protected]>

[ Upstream commit 865cea40b69741c3da2574176876463233b2b67c ]

If the user is requesting us to change the QP state to the same state that it is already in, return success instead of failure.

---
 drivers/infiniband/hw/qedr/verbs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/qedr/verbs.c +1 -1
@@ -1653,7 +1653,7 @@ static int qedr_update_qp_state(struct q
 	int status = 0;
 
 	if (new_state == qp->state)
-		return 1;
+		return 0;
 
 	switch (qp->state) {
 	case QED_ROCE_QP_STATE_RESET:
author maintainer
#76 lore raw

PATCH 70/109 RDMA/qedr: Fix RDMA CM loopback

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ram Amrani <[email protected]>

[ Upstream commit af2b14b8b8ae21b0047a52c767ac8b44f435a280 ]

The loopback logic in RDMA CM packets compares Ethernet addresses and was accidently inverse.

---
 drivers/infiniband/hw/qedr/qedr_cm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/qedr/qedr_cm.c +2 -2
@@ -404,9 +404,9 @@ static inline int qedr_gsi_build_packet(
 	}
 
 	if (ether_addr_equal(udh.eth.smac_h, udh.eth.dmac_h))
-		packet->tx_dest = QED_ROCE_LL2_TX_DEST_NW;
-	else
 		packet->tx_dest = QED_ROCE_LL2_TX_DEST_LB;
+	else
+		packet->tx_dest = QED_ROCE_LL2_TX_DEST_NW;
 
 	packet->roce_mode = roce_mode;
 	memcpy(packet->header.vaddr, ud_header_buffer, header_size);
author maintainer
#77 lore raw

PATCH 71/109 tipc: fix nametbl_lock soft lockup at module exit

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Parthasarathy Bhuvaragan <[email protected]>

[ Upstream commit 9dc3abdd1f7ea524e8552e0a3ef01219892ed1f4 ]

Commit 333f796235a527 ("tipc: fix a race condition leading to subscriber refcnt bug") reveals a soft lockup while acquiring nametbl_lock.

Before commit 333f796235a527, we call tipc_conn_shutdown() from tipc_close_conn() in the context of tipc_topsrv_stop(). In that context, we are allowed to grab the nametbl_lock.

Commit 333f796235a527, moved tipc_conn_release (renamed from tipc_conn_shutdown) to the connection refcount cleanup. This allows either tipc_nametbl_withdraw() or tipc_topsrv_stop() to the cleanup.

Since tipc_exit_net() first calls tipc_topsrv_stop() and then tipc_nametble_withdraw() increases the chances for the later to perform the connection cleanup.

The soft lockup occurs in the call chain of tipc_nametbl_withdraw(), when it performs the tipc_conn_kref_release() as it tries to grab nametbl_lock again while holding it already. tipc_nametbl_withdraw() grabs nametbl_lock
tipc_nametbl_remove_publ()
tipc_subscrp_report_overlap()
tipc_subscrp_send_event()
tipc_conn_sendmsg()
<< if (con->flags != CF_CONNECTED) we do conn_put(),
triggering the cleanup as refcount=0. >>
tipc_conn_kref_release
tipc_sock_release
tipc_conn_release
tipc_subscrb_delete
tipc_subscrp_delete
tipc_nametbl_unsubscribe << Soft Lockup >>

The previous changes in this series fixes the race conditions fixed by commit 333f796235a527. Hence we can now revert the commit.

Fixes 333f796235a52727 ("tipc: fix a race condition leading to subscriber refcnt bug")
Reported-and-Tested-by John Thompson <[email protected]>
---
 net/tipc/server.c |   16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)
net/tipc/server.c +5 -11
@@ -86,7 +86,6 @@ struct outqueue_entry {
 static void tipc_recv_work(struct work_struct *work);
 static void tipc_send_work(struct work_struct *work);
 static void tipc_clean_outqueues(struct tipc_conn *con);
-static void tipc_sock_release(struct tipc_conn *con);
 
 static void tipc_conn_kref_release(struct kref *kref)
 {
@@ -104,7 +103,6 @@ static void tipc_conn_kref_release(struc
 		}
 		saddr->scope = -TIPC_NODE_SCOPE;
 		kernel_bind(sock, (struct sockaddr *)saddr, sizeof(*saddr));
-		tipc_sock_release(con);
 		sock_release(sock);
 		con->sock = NULL;
 
@@ -194,19 +192,15 @@ static void tipc_unregister_callbacks(st
 	write_unlock_bh(&sk->sk_callback_lock);
 }
 
-static void tipc_sock_release(struct tipc_conn *con)
+static void tipc_close_conn(struct tipc_conn *con)
 {
 	struct tipc_server *s = con->server;
 
-	if (con->conid)
-		s->tipc_conn_release(con->conid, con->usr_data);
-
-	tipc_unregister_callbacks(con);
-}
-
-static void tipc_close_conn(struct tipc_conn *con)
-{
 	if (test_and_clear_bit(CF_CONNECTED, &con->flags)) {
+		tipc_unregister_callbacks(con);
+
+		if (con->conid)
+			s->tipc_conn_release(con->conid, con->usr_data);
 
 		/* We shouldn't flush pending works as we may be in the
 		 * thread. In fact the races with pending rx/tx work structs
author maintainer
#78 lore raw

PATCH 72/109 tipc: fix cleanup at module unload

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Parthasarathy Bhuvaragan <[email protected]>

[ Upstream commit 35e22e49a5d6a741ebe7f2dd280b2052c3003ef7 ]

In tipc_server_stop(), we iterate over the connections with limiting factor as server's idr_in_use. We ignore the fact that this variable is decremented in tipc_close_conn(), leading to premature exit.

In this commit, we iterate until the we have no connections left.

---
 net/tipc/server.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
net/tipc/server.c +1 -3
@@ -619,14 +619,12 @@ int tipc_server_start(struct tipc_server
 void tipc_server_stop(struct tipc_server *s)
 {
 	struct tipc_conn *con;
-	int total = 0;
 	int id;
 
 	spin_lock_bh(&s->idr_lock);
-	for (id = 0; total < s->idr_in_use; id++) {
+	for (id = 0; s->idr_in_use; id++) {
 		con = idr_find(&s->conn_idr, id);
 		if (con) {
-			total++;
 			spin_unlock_bh(&s->idr_lock);
 			tipc_close_conn(con);
 			spin_lock_bh(&s->idr_lock);
author maintainer
#80 lore raw

PATCH 74/109 tcp: correct memory barrier usage in tcp_check_space()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jason Baron <[email protected]>

[ Upstream commit 56d806222ace4c3aeae516cd7a855340fb2839d8 ]

sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit(). Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.

Fixes 3c7151275c0c ("tcp: add memory barriers to write space paths")
Cc Eric Dumazet <[email protected]>
Cc Oleg Nesterov <[email protected]>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/tcp_input.c +1 -1
@@ -5081,7 +5081,7 @@ static void tcp_check_space(struct sock
 	if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) {
 		sock_reset_flag(sk, SOCK_QUEUE_SHRUNK);
 		/* pairs with tcp_poll() */
-		smp_mb__after_atomic();
+		smp_mb();
 		if (sk->sk_socket &&
 		    test_bit(SOCK_NOSPACE, &sk->sk_socket->flags))
 			tcp_new_space(sk);
author maintainer
#81 lore raw

PATCH 75/109 i2c: i2c-cadence: Initialize configuration before probing devices

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <[email protected]>

[ Upstream commit 0e1929dedea36781e25902118c93edd8d8f09af1 ]

The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround in the controller, but did so after calling i2c_add_adapter() which starts probing devices on the bus. Change the order so that the configuration is completely finished before using the adapter.

---
 drivers/i2c/busses/i2c-cadence.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-cadence.c +4 -4
@@ -962,10 +962,6 @@ static int cdns_i2c_probe(struct platfor
 		goto err_clk_dis;
 	}
 
-	ret = i2c_add_adapter(&id->adap);
-	if (ret < 0)
-		goto err_clk_dis;
-
 	/*
 	 * Cadence I2C controller has a bug wherein it generates
 	 * invalid read transaction after HW timeout in master receiver mode.
@@ -975,6 +971,10 @@ static int cdns_i2c_probe(struct platfor
 	 */
 	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
 
+	ret = i2c_add_adapter(&id->adap);
+	if (ret < 0)
+		goto err_clk_dis;
+
 	dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
 		 id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
 
author maintainer
#82 lore raw

PATCH 76/109 nvmet: cancel fatal error and flush async work before free controller

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sagi Grimberg <[email protected]>

[ Upstream commit 06406d81a2d7cfb8abcc4fa6cdfeb8e5897007c5 ]

Make sure they are not running and we can free the controller safely.

---
 drivers/nvme/target/core.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/nvme/target/core.c +3 -0
@@ -816,6 +816,9 @@ static void nvmet_ctrl_free(struct kref
 	list_del(&ctrl->subsys_entry);
 	mutex_unlock(&subsys->lock);
 
+	flush_work(&ctrl->async_event_work);
+	cancel_work_sync(&ctrl->fatal_err_work);
+
 	ida_simple_remove(&subsys->cntlid_ida, ctrl->cntlid);
 	nvmet_subsys_put(subsys);
 
author maintainer
#83 lore raw

PATCH 77/109 gtp: clear DF bit on GTP packet tx

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Schultz <[email protected]>

[ Upstream commit c6ce1d08eede4c2968ed08aafa3165e8e183c5a1 ]

3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2:

Quoted 2 lines

Backbone router: Any router in the backbone may fragment the GTP packet if needed, according to IPv4.

---
 drivers/net/gtp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/gtp.c +1 -1
@@ -612,7 +612,7 @@ static netdev_tx_t gtp_dev_xmit(struct s
 				    pktinfo.fl4.saddr, pktinfo.fl4.daddr,
 				    pktinfo.iph->tos,
 				    ip4_dst_hoplimit(&pktinfo.rt->dst),
-				    htons(IP_DF),
+				    0,
 				    pktinfo.gtph_port, pktinfo.gtph_port,
 				    true, false);
 		break;
author maintainer
#84 lore raw

PATCH 78/109 gtp: fix cross netns recv on gtp socket

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Schultz <[email protected]>

[ Upstream commit 3ab1b469e847ba425af3c5ad5068cc94b55b38d0 ]

The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation).

Remove the now obsolete net field from gtp_dev.

---
 drivers/net/gtp.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/net/gtp.c +4 -6
@@ -69,7 +69,6 @@ struct gtp_dev {
 	struct socket		*sock0;
 	struct socket		*sock1u;
 
-	struct net		*net;
 	struct net_device	*dev;
 
 	unsigned int		hash_size;
@@ -316,7 +315,7 @@ static int gtp_encap_recv(struct sock *s
 
 	netdev_dbg(gtp->dev, "encap_recv sk=%p\n", sk);
 
-	xnet = !net_eq(gtp->net, dev_net(gtp->dev));
+	xnet = !net_eq(sock_net(sk), dev_net(gtp->dev));
 
 	switch (udp_sk(sk)->encap_type) {
 	case UDP_ENCAP_GTP0:
@@ -658,7 +657,7 @@ static void gtp_link_setup(struct net_de
 static int gtp_hashtable_new(struct gtp_dev *gtp, int hsize);
 static void gtp_hashtable_free(struct gtp_dev *gtp);
 static int gtp_encap_enable(struct net_device *dev, struct gtp_dev *gtp,
-			    int fd_gtp0, int fd_gtp1, struct net *src_net);
+			    int fd_gtp0, int fd_gtp1);
 
 static int gtp_newlink(struct net *src_net, struct net_device *dev,
 			struct nlattr *tb[], struct nlattr *data[])
@@ -675,7 +674,7 @@ static int gtp_newlink(struct net *src_n
 	fd0 = nla_get_u32(data[IFLA_GTP_FD0]);
 	fd1 = nla_get_u32(data[IFLA_GTP_FD1]);
 
-	err = gtp_encap_enable(dev, gtp, fd0, fd1, src_net);
+	err = gtp_encap_enable(dev, gtp, fd0, fd1);
 	if (err < 0)
 		goto out_err;
 
@@ -821,7 +820,7 @@ static void gtp_hashtable_free(struct gt
 }
 
 static int gtp_encap_enable(struct net_device *dev, struct gtp_dev *gtp,
-			    int fd_gtp0, int fd_gtp1, struct net *src_net)
+			    int fd_gtp0, int fd_gtp1)
 {
 	struct udp_tunnel_sock_cfg tuncfg = {NULL};
 	struct socket *sock0, *sock1u;
@@ -858,7 +857,6 @@ static int gtp_encap_enable(struct net_d
 
 	gtp->sock0 = sock0;
 	gtp->sock1u = sock1u;
-	gtp->net = src_net;
 
 	tuncfg.sk_user_data = gtp;
 	tuncfg.encap_rcv = gtp_encap_recv;
author maintainer
#87 lore raw

PATCH 82/109 vfio/spapr: Fix missing mutex unlock when creating a window

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Kardashevskiy <[email protected]>

[ Upstream commit 2da64d20a0b20046d688e44f4033efd09157e29d ]

Commit d9c728949ddc ("vfio/spapr: Postpone default window creation") added an additional exit to the VFIO_IOMMU_SPAPR_TCE_CREATE case and made it possible to return from tce_iommu_ioctl() without unlocking container->lock; this fixes the issue.

Fixes d9c728949ddc ("vfio/spapr: Postpone default window creation")
---
 drivers/vfio/vfio_iommu_spapr_tce.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/vfio/vfio_iommu_spapr_tce.c +5 -6
@@ -1123,12 +1123,11 @@ static long tce_iommu_ioctl(void *iommu_
 		mutex_lock(&container->lock);
 
 		ret = tce_iommu_create_default_window(container);
-		if (ret)
-			return ret;
-
-		ret = tce_iommu_create_window(container, create.page_shift,
-				create.window_size, create.levels,
-				&create.start_addr);
+		if (!ret)
+			ret = tce_iommu_create_window(container,
+					create.page_shift,
+					create.window_size, create.levels,
+					&create.start_addr);
 
 		mutex_unlock(&container->lock);
 
author maintainer
#88 lore raw

PATCH 83/109 mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

[ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ]

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted.

---
 drivers/staging/lustre/lustre/llite/llite_mmap.c |    4 +---
 include/linux/buffer_head.h                      |    4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)
drivers/staging/lustre/lustre/llite/llite_mmap.c +1 -3
@@ -401,15 +401,13 @@ static int ll_page_mkwrite(struct vm_are
 		result = VM_FAULT_LOCKED;
 		break;
 	case -ENODATA:
+	case -EAGAIN:
 	case -EFAULT:
 		result = VM_FAULT_NOPAGE;
 		break;
 	case -ENOMEM:
 		result = VM_FAULT_OOM;
 		break;
-	case -EAGAIN:
-		result = VM_FAULT_RETRY;
-		break;
 	default:
 		result = VM_FAULT_SIGBUS;
 		break;
include/linux/buffer_head.h +1 -3
@@ -239,12 +239,10 @@ static inline int block_page_mkwrite_ret
 {
 	if (err == 0)
 		return VM_FAULT_LOCKED;
-	if (err == -EFAULT)
+	if (err == -EFAULT || err == -EAGAIN)
 		return VM_FAULT_NOPAGE;
 	if (err == -ENOMEM)
 		return VM_FAULT_OOM;
-	if (err == -EAGAIN)
-		return VM_FAULT_RETRY;
 	/* -ENOSPC, -EDQUOT, -EIO ... */
 	return VM_FAULT_SIGBUS;
 }
author maintainer
#89 lore raw

PATCH 84/109 xen-netfront: Improve error handling during initialization

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall <[email protected]>

[ Upstream commit e2e004acc7cbe3c531e752a270a74e95cde3ea48 ]

This fixes a crash when running out of grant refs when creating many queues across many netdevs.

* If creating queues fails (i.e. there are no grant refs available), call xenbus_dev_fatal() to ensure that the xenbus device is set to the closed state.
* If no queues are created, don't call xennet_disconnect_backend as netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid leaving around a half setup network device.

---
 drivers/net/xen-netfront.c |   29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)
drivers/net/xen-netfront.c +11 -18
@@ -1854,27 +1854,19 @@ static int talk_to_netback(struct xenbus
 		xennet_destroy_queues(info);
 
 	err = xennet_create_queues(info, &num_queues);
-	if (err < 0)
-		goto destroy_ring;
+	if (err < 0) {
+		xenbus_dev_fatal(dev, err, "creating queues");
+		kfree(info->queues);
+		info->queues = NULL;
+		goto out;
+	}
 
 	/* Create shared ring, alloc event channel -- for each queue */
 	for (i = 0; i < num_queues; ++i) {
 		queue = &info->queues[i];
 		err = setup_netfront(dev, queue, feature_split_evtchn);
-		if (err) {
-			/* setup_netfront() will tidy up the current
-			 * queue on error, but we need to clean up
-			 * those already allocated.
-			 */
-			if (i > 0) {
-				rtnl_lock();
-				netif_set_real_num_tx_queues(info->netdev, i);
-				rtnl_unlock();
-				goto destroy_ring;
-			} else {
-				goto out;
-			}
-		}
+		if (err)
+			goto destroy_ring;
 	}
 
 again:
@@ -1964,9 +1956,10 @@ abort_transaction_no_dev_fatal:
 	xenbus_transaction_end(xbt, 1);
  destroy_ring:
 	xennet_disconnect_backend(info);
-	kfree(info->queues);
-	info->queues = NULL;
+	xennet_destroy_queues(info);
  out:
+	unregister_netdev(info->netdev);
+	xennet_free_netdev(info->netdev);
 	return err;
 }
 
author maintainer
#93 lore raw

PATCH 88/109 dma-buf/dma-fence: Extract __dma_fence_is_later()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit 8111477663813caa1a4469cfe6afaae36cd04513 upstream.

Often we have the task of comparing two seqno known to be on the same context, so provide a common __dma_fence_is_later().

---
 include/linux/fence.h |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
include/linux/fence.h +14 -1
@@ -281,6 +281,19 @@ fence_is_signaled(struct fence *fence)
 }
 
 /**
+ * __fence_is_later - return if f1 is chronologically later than f2
+ * @f1:	[in]	the first fence's seqno
+ * @f2:	[in]	the second fence's seqno from the same context
+ *
+ * Returns true if f1 is chronologically later than f2. Both fences must be
+ * from the same context, since a seqno is not common across contexts.
+ */
+static inline bool __fence_is_later(u32 f1, u32 f2)
+{
+	return (int)(f1 - f2) > 0;
+}
+
+/**
  * fence_is_later - return if f1 is chronologically later than f2
  * @f1:	[in]	the first fence from the same context
  * @f2:	[in]	the second fence from the same context
@@ -293,7 +306,7 @@ static inline bool fence_is_later(struct
 	if (WARN_ON(f1->context != f2->context))
 		return false;
 
-	return (int)(f1->seqno - f2->seqno) > 0;
+	return __fence_is_later(f1->seqno, f2->seqno);
 }
 
 /**
author maintainer
#94 lore raw

PATCH 89/109 dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit 61894b02716f122dd7662d5d89f5b2245ca551e2 upstream.

Use the canonical __dma_fence_is_later() to compare the fence seqno against the timeline seqno to check if the fence is signaled.

---
 drivers/dma-buf/sw_sync.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma-buf/sw_sync.c +1 -1
@@ -219,7 +219,7 @@ static bool timeline_fence_signaled(stru
 {
 	struct sync_timeline *parent = fence_parent(fence);
 
-	return (fence->seqno > parent->value) ? false : true;
+	return !__fence_is_later(fence->seqno, parent->value);
 }
 
 static bool timeline_fence_enable_signaling(struct fence *fence)
author maintainer
#95 lore raw

PATCH 90/109 dma-buf/sw-sync: Prevent user overflow on timeline advance

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit 8f66d3aa1735bc95ae58d846a157357e8d41abb8 upstream.

The timeline is u32, which limits any single advance to INT_MAX so that we can detect all fences that need signaling.

---
 drivers/dma-buf/sw_sync.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/dma-buf/sw_sync.c +5 -0
@@ -345,6 +345,11 @@ static long sw_sync_ioctl_inc(struct syn
 	if (copy_from_user(&value, (void __user *)arg, sizeof(value)))
 		return -EFAULT;
 
+	while (value > INT_MAX)  {
+		sync_timeline_signal(obj, INT_MAX);
+		value -= INT_MAX;
+	}
+
 	sync_timeline_signal(obj, value);
 
 	return 0;
author maintainer
#96 lore raw

PATCH 91/109 dma-buf/sw-sync: Reduce irqsave/irqrestore from known context

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit a6aa8fca4d792c72947e341d7842d2f700534335 upstream.

If we know the context under which we are called, then we can use the simpler form of spin_lock_irq (saving the save/restore).

---
 drivers/dma-buf/sw_sync.c    |   15 +++++++++------
 drivers/dma-buf/sync_debug.c |   14 ++++++--------
 2 files changed, 15 insertions(+), 14 deletions(-)
drivers/dma-buf/sw_sync.c +9 -6
@@ -135,12 +135,11 @@ static void sync_timeline_put(struct syn
  */
 static void sync_timeline_signal(struct sync_timeline *obj, unsigned int inc)
 {
-	unsigned long flags;
 	struct sync_pt *pt, *next;
 
 	trace_sync_timeline(obj);
 
-	spin_lock_irqsave(&obj->child_list_lock, flags);
+	spin_lock_irq(&obj->child_list_lock);
 
 	obj->value += inc;
 
@@ -150,7 +149,7 @@ static void sync_timeline_signal(struct
 			list_del_init(&pt->active_list);
 	}
 
-	spin_unlock_irqrestore(&obj->child_list_lock, flags);
+	spin_unlock_irq(&obj->child_list_lock);
 }
 
 /**
@@ -167,7 +166,6 @@ static void sync_timeline_signal(struct
 static struct sync_pt *sync_pt_create(struct sync_timeline *obj, int size,
 			     unsigned int value)
 {
-	unsigned long flags;
 	struct sync_pt *pt;
 
 	if (size < sizeof(*pt))
@@ -177,13 +175,16 @@ static struct sync_pt *sync_pt_create(st
 	if (!pt)
 		return NULL;
 
-	spin_lock_irqsave(&obj->child_list_lock, flags);
+	spin_lock_irq(&obj->child_list_lock);
+
 	sync_timeline_get(obj);
 	fence_init(&pt->base, &timeline_fence_ops, &obj->child_list_lock,
 		   obj->context, value);
 	list_add_tail(&pt->child_list, &obj->child_list_head);
 	INIT_LIST_HEAD(&pt->active_list);
-	spin_unlock_irqrestore(&obj->child_list_lock, flags);
+
+	spin_unlock_irq(&obj->child_list_lock);
+
 	return pt;
 }
 
@@ -206,9 +207,11 @@ static void timeline_fence_release(struc
 	unsigned long flags;
 
 	spin_lock_irqsave(fence->lock, flags);
+
 	list_del(&pt->child_list);
 	if (!list_empty(&pt->active_list))
 		list_del(&pt->active_list);
+
 	spin_unlock_irqrestore(fence->lock, flags);
 
 	sync_timeline_put(parent);
drivers/dma-buf/sync_debug.c +6 -8
@@ -116,17 +116,16 @@ static void sync_print_fence(struct seq_
 static void sync_print_obj(struct seq_file *s, struct sync_timeline *obj)
 {
 	struct list_head *pos;
-	unsigned long flags;
 
 	seq_printf(s, "%s: %d\n", obj->name, obj->value);
 
-	spin_lock_irqsave(&obj->child_list_lock, flags);
+	spin_lock_irq(&obj->child_list_lock);
 	list_for_each(pos, &obj->child_list_head) {
 		struct sync_pt *pt =
 			container_of(pos, struct sync_pt, child_list);
 		sync_print_fence(s, &pt->base, false);
 	}
-	spin_unlock_irqrestore(&obj->child_list_lock, flags);
+	spin_unlock_irq(&obj->child_list_lock);
 }
 
 static void sync_print_sync_file(struct seq_file *s,
@@ -149,12 +148,11 @@ static void sync_print_sync_file(struct
 
 static int sync_debugfs_show(struct seq_file *s, void *unused)
 {
-	unsigned long flags;
 	struct list_head *pos;
 
 	seq_puts(s, "objs:\n--------------\n");
 
-	spin_lock_irqsave(&sync_timeline_list_lock, flags);
+	spin_lock_irq(&sync_timeline_list_lock);
 	list_for_each(pos, &sync_timeline_list_head) {
 		struct sync_timeline *obj =
 			container_of(pos, struct sync_timeline,
@@ -163,11 +161,11 @@ static int sync_debugfs_show(struct seq_
 		sync_print_obj(s, obj);
 		seq_puts(s, "\n");
 	}
-	spin_unlock_irqrestore(&sync_timeline_list_lock, flags);
+	spin_unlock_irq(&sync_timeline_list_lock);
 
 	seq_puts(s, "fences:\n--------------\n");
 
-	spin_lock_irqsave(&sync_file_list_lock, flags);
+	spin_lock_irq(&sync_file_list_lock);
 	list_for_each(pos, &sync_file_list_head) {
 		struct sync_file *sync_file =
 			container_of(pos, struct sync_file, sync_file_list);
@@ -175,7 +173,7 @@ static int sync_debugfs_show(struct seq_
 		sync_print_sync_file(s, sync_file);
 		seq_puts(s, "\n");
 	}
-	spin_unlock_irqrestore(&sync_file_list_lock, flags);
+	spin_unlock_irq(&sync_file_list_lock);
 	return 0;
 }
 
author maintainer
#97 lore raw

PATCH 92/109 dma-buf/sw-sync: sync_pt is private and of fixed size

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit 3b52ce44e720c240afc4c4b03140d7b7811b23bd upstream.

Since sync_pt is only allocated from a single location and is no longer the base class for fences (that is struct dma_fence) it no longer needs a generic unsized allocator.

---
 drivers/dma-buf/sw_sync.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/dma-buf/sw_sync.c +4 -8
@@ -155,7 +155,6 @@ static void sync_timeline_signal(struct
 /**
  * sync_pt_create() - creates a sync pt
  * @parent:	fence's parent sync_timeline
- * @size:	size to allocate for this pt
  * @inc:	value of the fence
  *
  * Creates a new sync_pt as a child of @parent.  @size bytes will be
@@ -163,15 +162,12 @@ static void sync_timeline_signal(struct
  * the generic sync_timeline struct. Returns the sync_pt object or
  * NULL in case of error.
  */
-static struct sync_pt *sync_pt_create(struct sync_timeline *obj, int size,
-			     unsigned int value)
+static struct sync_pt *sync_pt_create(struct sync_timeline *obj,
+				      unsigned int value)
 {
 	struct sync_pt *pt;
 
-	if (size < sizeof(*pt))
-		return NULL;
-
-	pt = kzalloc(size, GFP_KERNEL);
+	pt = kzalloc(sizeof(*pt), GFP_KERNEL);
 	if (!pt)
 		return NULL;
 
@@ -312,7 +308,7 @@ static long sw_sync_ioctl_create_fence(s
 		goto err;
 	}
 
-	pt = sync_pt_create(obj, sizeof(*pt), data.value);
+	pt = sync_pt_create(obj, data.value);
 	if (!pt) {
 		err = -ENOMEM;
 		goto err;
author maintainer
#98 lore raw

PATCH 93/109 dma-buf/sw-sync: Fix locking around sync_timeline lists

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit d3862e44daa7a0c94d2f6193502a8c49379acfce upstream.

The sync_pt were not adding themselves atomically to the timeline lists, corruption imminent. Only a single list is required to track the unsignaled sync_pt, so reduce it and rename the lock more appropriately along with using idiomatic names to distinguish a list from links along it.

v2: Prevent spinlock recursion on free during create (next patch) and fixup crossref in kerneldoc

---
 drivers/dma-buf/sw_sync.c    |   48 +++++++++++++++++--------------------------
 drivers/dma-buf/sync_debug.c |    9 +++-----
 drivers/dma-buf/sync_debug.h |   22 +++++++------------
 3 files changed, 31 insertions(+), 48 deletions(-)
drivers/dma-buf/sw_sync.c +19 -29
@@ -96,9 +96,8 @@ struct sync_timeline *sync_timeline_crea
 	obj->context = fence_context_alloc(1);
 	strlcpy(obj->name, name, sizeof(obj->name));
 
-	INIT_LIST_HEAD(&obj->child_list_head);
-	INIT_LIST_HEAD(&obj->active_list_head);
-	spin_lock_init(&obj->child_list_lock);
+	INIT_LIST_HEAD(&obj->pt_list);
+	spin_lock_init(&obj->lock);
 
 	sync_timeline_debug_add(obj);
 
@@ -139,17 +138,15 @@ static void sync_timeline_signal(struct
 
 	trace_sync_timeline(obj);
 
-	spin_lock_irq(&obj->child_list_lock);
+	spin_lock_irq(&obj->lock);
 
 	obj->value += inc;
 
-	list_for_each_entry_safe(pt, next, &obj->active_list_head,
-				 active_list) {
+	list_for_each_entry_safe(pt, next, &obj->pt_list, link)
 		if (fence_is_signaled_locked(&pt->base))
-			list_del_init(&pt->active_list);
-	}
+			list_del_init(&pt->link);
 
-	spin_unlock_irq(&obj->child_list_lock);
+	spin_unlock_irq(&obj->lock);
 }
 
 /**
@@ -171,15 +168,15 @@ static struct sync_pt *sync_pt_create(st
 	if (!pt)
 		return NULL;
 
-	spin_lock_irq(&obj->child_list_lock);
-
 	sync_timeline_get(obj);
-	fence_init(&pt->base, &timeline_fence_ops, &obj->child_list_lock,
+	fence_init(&pt->base, &timeline_fence_ops, &obj->lock,
 		   obj->context, value);
-	list_add_tail(&pt->child_list, &obj->child_list_head);
-	INIT_LIST_HEAD(&pt->active_list);
+	INIT_LIST_HEAD(&pt->link);
 
-	spin_unlock_irq(&obj->child_list_lock);
+	spin_lock_irq(&obj->lock);
+	if (!fence_is_signaled_locked(&pt->base))
+		list_add_tail(&pt->link, &obj->pt_list);
+	spin_unlock_irq(&obj->lock);
 
 	return pt;
 }
@@ -200,15 +197,15 @@ static void timeline_fence_release(struc
 {
 	struct sync_pt *pt = fence_to_sync_pt(fence);
 	struct sync_timeline *parent = fence_parent(fence);
-	unsigned long flags;
 
-	spin_lock_irqsave(fence->lock, flags);
+	if (!list_empty(&pt->link)) {
+		unsigned long flags;
 
-	list_del(&pt->child_list);
-	if (!list_empty(&pt->active_list))
-		list_del(&pt->active_list);
-
-	spin_unlock_irqrestore(fence->lock, flags);
+		spin_lock_irqsave(fence->lock, flags);
+		if (!list_empty(&pt->link))
+			list_del(&pt->link);
+		spin_unlock_irqrestore(fence->lock, flags);
+	}
 
 	sync_timeline_put(parent);
 	fence_free(fence);
@@ -223,13 +220,6 @@ static bool timeline_fence_signaled(stru
 
 static bool timeline_fence_enable_signaling(struct fence *fence)
 {
-	struct sync_pt *pt = fence_to_sync_pt(fence);
-	struct sync_timeline *parent = fence_parent(fence);
-
-	if (timeline_fence_signaled(fence))
-		return false;
-
-	list_add_tail(&pt->active_list, &parent->active_list_head);
 	return true;
 }
 
drivers/dma-buf/sync_debug.c +4 -5
@@ -119,13 +119,12 @@ static void sync_print_obj(struct seq_fi
 
 	seq_printf(s, "%s: %d\n", obj->name, obj->value);
 
-	spin_lock_irq(&obj->child_list_lock);
-	list_for_each(pos, &obj->child_list_head) {
-		struct sync_pt *pt =
-			container_of(pos, struct sync_pt, child_list);
+	spin_lock_irq(&obj->lock);
+	list_for_each(pos, &obj->pt_list) {
+		struct sync_pt *pt = container_of(pos, struct sync_pt, link);
 		sync_print_fence(s, &pt->base, false);
 	}
-	spin_unlock_irq(&obj->child_list_lock);
+	spin_unlock_irq(&obj->lock);
 }
 
 static void sync_print_sync_file(struct seq_file *s,
drivers/dma-buf/sync_debug.h +8 -14
@@ -24,43 +24,37 @@
  * struct sync_timeline - sync object
  * @kref:		reference count on fence.
  * @name:		name of the sync_timeline. Useful for debugging
- * @child_list_head:	list of children sync_pts for this sync_timeline
- * @child_list_lock:	lock protecting @child_list_head and fence.status
- * @active_list_head:	list of active (unsignaled/errored) sync_pts
+ * @lock:		lock protecting @pt_list and @value
+ * @pt_list:		list of active (unsignaled/errored) sync_pts
  * @sync_timeline_list:	membership in global sync_timeline_list
  */
 struct sync_timeline {
 	struct kref		kref;
 	char			name[32];
 
-	/* protected by child_list_lock */
+	/* protected by lock */
 	u64			context;
 	int			value;
 
-	struct list_head	child_list_head;
-	spinlock_t		child_list_lock;
-
-	struct list_head	active_list_head;
+	struct list_head	pt_list;
+	spinlock_t		lock;
 
 	struct list_head	sync_timeline_list;
 };
 
 static inline struct sync_timeline *fence_parent(struct fence *fence)
 {
-	return container_of(fence->lock, struct sync_timeline,
-			    child_list_lock);
+	return container_of(fence->lock, struct sync_timeline, lock);
 }
 
 /**
  * struct sync_pt - sync_pt object
  * @base: base fence object
- * @child_list: sync timeline child's list
- * @active_list: sync timeline active child's list
+ * @link: link on the sync timeline's list
  */
 struct sync_pt {
 	struct fence base;
-	struct list_head child_list;
-	struct list_head active_list;
+	struct list_head link;
 };
 
 #ifdef CONFIG_SW_SYNC
author maintainer
#99 lore raw

PATCH 94/109 dma-buf/sw-sync: Use an rbtree to sort fences in the timeline

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit f1e8c67123cf171e2b0357e885e426328b241d7d upstream.

Reduce the list iteration when incrementing the timeline by storing the fences in increasing order.

v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.

---
 drivers/dma-buf/sw_sync.c    |   49 +++++++++++++++++++++++++++++++++++++------
 drivers/dma-buf/sync_debug.h |    5 ++++
 2 files changed, 48 insertions(+), 6 deletions(-)
drivers/dma-buf/sw_sync.c +43 -6
@@ -96,6 +96,7 @@ struct sync_timeline *sync_timeline_crea
 	obj->context = fence_context_alloc(1);
 	strlcpy(obj->name, name, sizeof(obj->name));
 
+	obj->pt_tree = RB_ROOT;
 	INIT_LIST_HEAD(&obj->pt_list);
 	spin_lock_init(&obj->lock);
 
@@ -142,9 +143,13 @@ static void sync_timeline_signal(struct
 
 	obj->value += inc;
 
-	list_for_each_entry_safe(pt, next, &obj->pt_list, link)
-		if (fence_is_signaled_locked(&pt->base))
-			list_del_init(&pt->link);
+	list_for_each_entry_safe(pt, next, &obj->pt_list, link) {
+		if (!fence_is_signaled_locked(&pt->base))
+			break;
+
+		list_del_init(&pt->link);
+		rb_erase(&pt->node, &obj->pt_tree);
+	}
 
 	spin_unlock_irq(&obj->lock);
 }
@@ -174,8 +179,38 @@ static struct sync_pt *sync_pt_create(st
 	INIT_LIST_HEAD(&pt->link);
 
 	spin_lock_irq(&obj->lock);
-	if (!fence_is_signaled_locked(&pt->base))
-		list_add_tail(&pt->link, &obj->pt_list);
+	if (!fence_is_signaled_locked(&pt->base)) {
+		struct rb_node **p = &obj->pt_tree.rb_node;
+		struct rb_node *parent = NULL;
+
+		while (*p) {
+			struct sync_pt *other;
+			int cmp;
+
+			parent = *p;
+			other = rb_entry(parent, typeof(*pt), node);
+			cmp = value - other->base.seqno;
+			if (cmp > 0) {
+				p = &parent->rb_right;
+			} else if (cmp < 0) {
+				p = &parent->rb_left;
+			} else {
+				if (fence_get_rcu(&other->base)) {
+					fence_put(&pt->base);
+					pt = other;
+					goto unlock;
+				}
+				p = &parent->rb_left;
+			}
+		}
+		rb_link_node(&pt->node, parent, p);
+		rb_insert_color(&pt->node, &obj->pt_tree);
+
+		parent = rb_next(&pt->node);
+		list_add_tail(&pt->link,
+			      parent ? &rb_entry(parent, typeof(*pt), node)->link : &obj->pt_list);
+	}
+unlock:
 	spin_unlock_irq(&obj->lock);
 
 	return pt;
@@ -202,8 +237,10 @@ static void timeline_fence_release(struc
 		unsigned long flags;
 
 		spin_lock_irqsave(fence->lock, flags);
-		if (!list_empty(&pt->link))
+		if (!list_empty(&pt->link)) {
 			list_del(&pt->link);
+			rb_erase(&pt->node, &parent->pt_tree);
+		}
 		spin_unlock_irqrestore(fence->lock, flags);
 	}
 
drivers/dma-buf/sync_debug.h +5 -0
@@ -14,6 +14,7 @@
 #define _LINUX_SYNC_H
 
 #include <linux/list.h>
+#include <linux/rbtree.h>
 #include <linux/spinlock.h>
 #include <linux/fence.h>
 
@@ -25,6 +26,7 @@
  * @kref:		reference count on fence.
  * @name:		name of the sync_timeline. Useful for debugging
  * @lock:		lock protecting @pt_list and @value
+ * @pt_tree:		rbtree of active (unsignaled/errored) sync_pts
  * @pt_list:		list of active (unsignaled/errored) sync_pts
  * @sync_timeline_list:	membership in global sync_timeline_list
  */
@@ -36,6 +38,7 @@ struct sync_timeline {
 	u64			context;
 	int			value;
 
+	struct rb_root		pt_tree;
 	struct list_head	pt_list;
 	spinlock_t		lock;
 
@@ -51,10 +54,12 @@ static inline struct sync_timeline *fenc
  * struct sync_pt - sync_pt object
  * @base: base fence object
  * @link: link on the sync timeline's list
+ * @node: node in the sync timeline's tree
  */
 struct sync_pt {
 	struct fence base;
 	struct list_head link;
+	struct rb_node node;
 };
 
 #ifdef CONFIG_SW_SYNC
author maintainer
#100 lore raw

PATCH 95/109 dma-buf/sw_sync: move timeline_fence_ops around

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo Padovan <[email protected]>

commit 150b6a9d7d6fffb95c0a5349960a10569e8218b5 upstream.

We are going to use timeline_fence_signaled() in a internal function in the next commit.

---
 drivers/dma-buf/sw_sync.c |  138 +++++++++++++++++++++++-----------------------
 1 file changed, 69 insertions(+), 69 deletions(-)
drivers/dma-buf/sw_sync.c +69 -69
@@ -125,6 +125,75 @@ static void sync_timeline_put(struct syn
 	kref_put(&obj->kref, sync_timeline_free);
 }
 
+static const char *timeline_fence_get_driver_name(struct fence *fence)
+{
+	return "sw_sync";
+}
+
+static const char *timeline_fence_get_timeline_name(struct fence *fence)
+{
+	struct sync_timeline *parent = fence_parent(fence);
+
+	return parent->name;
+}
+
+static void timeline_fence_release(struct fence *fence)
+{
+	struct sync_pt *pt = fence_to_sync_pt(fence);
+	struct sync_timeline *parent = fence_parent(fence);
+
+	if (!list_empty(&pt->link)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(fence->lock, flags);
+		if (!list_empty(&pt->link)) {
+			list_del(&pt->link);
+			rb_erase(&pt->node, &parent->pt_tree);
+		}
+		spin_unlock_irqrestore(fence->lock, flags);
+	}
+
+	sync_timeline_put(parent);
+	fence_free(fence);
+}
+
+static bool timeline_fence_signaled(struct fence *fence)
+{
+	struct sync_timeline *parent = fence_parent(fence);
+
+	return !__fence_is_later(fence->seqno, parent->value);
+}
+
+static bool timeline_fence_enable_signaling(struct fence *fence)
+{
+	return true;
+}
+
+static void timeline_fence_value_str(struct fence *fence,
+				    char *str, int size)
+{
+	snprintf(str, size, "%d", fence->seqno);
+}
+
+static void timeline_fence_timeline_value_str(struct fence *fence,
+					     char *str, int size)
+{
+	struct sync_timeline *parent = fence_parent(fence);
+
+	snprintf(str, size, "%d", parent->value);
+}
+
+static const struct fence_ops timeline_fence_ops = {
+	.get_driver_name = timeline_fence_get_driver_name,
+	.get_timeline_name = timeline_fence_get_timeline_name,
+	.enable_signaling = timeline_fence_enable_signaling,
+	.signaled = timeline_fence_signaled,
+	.wait = fence_default_wait,
+	.release = timeline_fence_release,
+	.fence_value_str = timeline_fence_value_str,
+	.timeline_value_str = timeline_fence_timeline_value_str,
+};
+
 /**
  * sync_timeline_signal() - signal a status change on a sync_timeline
  * @obj:	sync_timeline to signal
@@ -216,75 +285,6 @@ unlock:
 	return pt;
 }
 
-static const char *timeline_fence_get_driver_name(struct fence *fence)
-{
-	return "sw_sync";
-}
-
-static const char *timeline_fence_get_timeline_name(struct fence *fence)
-{
-	struct sync_timeline *parent = fence_parent(fence);
-
-	return parent->name;
-}
-
-static void timeline_fence_release(struct fence *fence)
-{
-	struct sync_pt *pt = fence_to_sync_pt(fence);
-	struct sync_timeline *parent = fence_parent(fence);
-
-	if (!list_empty(&pt->link)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(fence->lock, flags);
-		if (!list_empty(&pt->link)) {
-			list_del(&pt->link);
-			rb_erase(&pt->node, &parent->pt_tree);
-		}
-		spin_unlock_irqrestore(fence->lock, flags);
-	}
-
-	sync_timeline_put(parent);
-	fence_free(fence);
-}
-
-static bool timeline_fence_signaled(struct fence *fence)
-{
-	struct sync_timeline *parent = fence_parent(fence);
-
-	return !__fence_is_later(fence->seqno, parent->value);
-}
-
-static bool timeline_fence_enable_signaling(struct fence *fence)
-{
-	return true;
-}
-
-static void timeline_fence_value_str(struct fence *fence,
-				    char *str, int size)
-{
-	snprintf(str, size, "%d", fence->seqno);
-}
-
-static void timeline_fence_timeline_value_str(struct fence *fence,
-					     char *str, int size)
-{
-	struct sync_timeline *parent = fence_parent(fence);
-
-	snprintf(str, size, "%d", parent->value);
-}
-
-static const struct fence_ops timeline_fence_ops = {
-	.get_driver_name = timeline_fence_get_driver_name,
-	.get_timeline_name = timeline_fence_get_timeline_name,
-	.enable_signaling = timeline_fence_enable_signaling,
-	.signaled = timeline_fence_signaled,
-	.wait = fence_default_wait,
-	.release = timeline_fence_release,
-	.fence_value_str = timeline_fence_value_str,
-	.timeline_value_str = timeline_fence_timeline_value_str,
-};
-
 /*
  * *WARNING*
  *
author maintainer
#101 lore raw

PATCH 96/109 dma-buf/sw_sync: clean up list before signaling the fence

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo Padovan <[email protected]>

commit 3792b7c1a70815fe4e954221c096f9278638fd21 upstream.

If userspace already dropped its own reference by closing the sw_sync fence fd we might end up in a deadlock where dma_fence_is_signaled_locked() will trigger the release of the fence and thus try to hold the lock to remove the fence from the list.

dma_fence_is_signaled_locked() tries to release/free the fence and hold the lock in the process.

We fix that by changing the order operation and clean up the list and rb-tree first.

v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)

---
 drivers/dma-buf/sw_sync.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/dma-buf/sw_sync.c +11 -1
@@ -213,11 +213,21 @@ static void sync_timeline_signal(struct
 	obj->value += inc;
 
 	list_for_each_entry_safe(pt, next, &obj->pt_list, link) {
-		if (!fence_is_signaled_locked(&pt->base))
+		if (!timeline_fence_signaled(&pt->base))
 			break;
 
 		list_del_init(&pt->link);
 		rb_erase(&pt->node, &obj->pt_tree);
+
+		/*
+		 * A signal callback may release the last reference to this
+		 * fence, causing it to be freed. That operation has to be
+		 * last to avoid a use after free inside this loop, and must
+		 * be after we remove the fence from the timeline in order to
+		 * prevent deadlocking on timeline->lock inside
+		 * timeline_fence_release().
+		 */
+		fence_signal_locked(&pt->base);
 	}
 
 	spin_unlock_irq(&obj->lock);
author maintainer
#102 lore raw

PATCH 97/109 dma-fence: Clear fence->status during dma_fence_init()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit 83dd1376fd92f33bdeca9e83d479534a4e7f870b upstream.

As the fence->status is an optional field that may be set before dma_fence_signal() is called to convey that the fence completed with an error, we have to ensure that it is always set to zero on initialisation so that the typical use (i.e. unset) always flags a successful completion.

---
 drivers/dma-buf/fence.c |    1 +
 1 file changed, 1 insertion(+)
drivers/dma-buf/fence.c +1 -0
@@ -526,6 +526,7 @@ fence_init(struct fence *fence, const st
 	fence->context = context;
 	fence->seqno = seqno;
 	fence->flags = 0UL;
+	fence->status = 0;
 
 	trace_fence_init(fence);
 }
author maintainer
#104 lore raw

PATCH 99/109 dma-fence: Introduce drm_fence_set_error() helper

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit a009e975da5c7d42a7f5eaadc54946eb5f76c9af upstream.

The dma_fence.error field (formerly known as dma_fence.status) is an optional field that may be set by drivers before calling dma_fence_signal(). The field can be used to indicate that the fence was completed in err rather than with success, and is visible to other consumers of the fence and to userspace via sync_file.

This patch renames the field from status to error so that its meaning is hopefully more clear (and distinct from dma_fence_get_status() which is a composite between the error state and signal state) and adds a helper that validates the preconditions of when it is suitable to adjust the error field.

---
 drivers/dma-buf/fence.c |    2 +-
 include/linux/fence.h   |   30 +++++++++++++++++++++++++-----
 2 files changed, 26 insertions(+), 6 deletions(-)
drivers/dma-buf/fence.c +1 -1
@@ -551,7 +551,7 @@ fence_init(struct fence *fence, const st
 	fence->context = context;
 	fence->seqno = seqno;
 	fence->flags = 0UL;
-	fence->status = 0;
+	fence->error = 0;
 
 	trace_fence_init(fence);
 }
include/linux/fence.h +25 -5
@@ -47,7 +47,7 @@ struct fence_cb;
  * can be compared to decide which fence would be signaled later.
  * @flags: A mask of FENCE_FLAG_* defined below
  * @timestamp: Timestamp when the fence was signaled.
- * @status: Optional, only valid if < 0, must be set before calling
+ * @error: Optional, only valid if < 0, must be set before calling
  * fence_signal, indicates that the fence has completed with an error.
  *
  * the flags member must be manipulated and read using the appropriate
@@ -79,7 +79,7 @@ struct fence {
 	unsigned seqno;
 	unsigned long flags;
 	ktime_t timestamp;
-	int status;
+	int error;
 };
 
 enum fence_flag_bits {
@@ -132,7 +132,7 @@ struct fence_cb {
  * or some failure occurred that made it impossible to enable
  * signaling. True indicates successful enabling.
  *
- * fence->status may be set in enable_signaling, but only when false is
+ * fence->error may be set in enable_signaling, but only when false is
  * returned.
  *
  * Calling fence_signal before enable_signaling is called allows
@@ -144,7 +144,7 @@ struct fence_cb {
  * the second time will be a noop since it was already signaled.
  *
  * Notes on signaled:
- * May set fence->status if returning true.
+ * May set fence->error if returning true.
  *
  * Notes on wait:
  * Must not be NULL, set to fence_default_wait for default implementation.
@@ -351,13 +351,33 @@ static inline struct fence *fence_later(
 static inline int fence_get_status_locked(struct fence *fence)
 {
 	if (fence_is_signaled_locked(fence))
-		return fence->status < 0 ? fence->status : 1;
+		return fence->error ?: 1;
 	else
 		return 0;
 }
 
 int fence_get_status(struct fence *fence);
 
+/**
+ * fence_set_error - flag an error condition on the fence
+ * @fence: [in]	the fence
+ * @error: [in]	the error to store
+ *
+ * Drivers can supply an optional error status condition before they signal
+ * the fence, to indicate that the fence was completed due to an error
+ * rather than success. This must be set before signaling (so that the value
+ * is visible before any waiters on the signal callback are woken). This
+ * helper exists to help catching erroneous setting of #fence.error.
+ */
+static inline void fence_set_error(struct fence *fence,
+				       int error)
+{
+	BUG_ON(test_bit(FENCE_FLAG_SIGNALED_BIT, &fence->flags));
+	BUG_ON(error >= 0 || error < -MAX_ERRNO);
+
+	fence->error = error;
+}
+
 signed long fence_wait_timeout(struct fence *, bool intr, signed long timeout);
 signed long fence_wait_any_timeout(struct fence **fences, uint32_t count,
 				   bool intr, signed long timeout);
author maintainer
#105 lore raw

PATCH 100/109 dma-buf/sw_sync: force signal all unsignaled fences on dying timeline

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Behr <[email protected]>

commit ea4d5a270b57fa8d4871f372ca9b97b7697fdfda upstream.

To avoid hanging userspace components that might have been waiting on the active fences of the destroyed timeline we need to signal with error all remaining fences on such timeline.

This restore the default behaviour of the Android sw_sync framework, which Android still relies on. It was broken on the dma fence conversion a few years ago and never fixed.

v2: Do not bother with cleanup do the list (Chris Wilson)

---
 drivers/dma-buf/sw_sync.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/dma-buf/sw_sync.c +9 -1
@@ -321,8 +321,16 @@ static int sw_sync_debugfs_open(struct i
 static int sw_sync_debugfs_release(struct inode *inode, struct file *file)
 {
 	struct sync_timeline *obj = file->private_data;
+	struct sync_pt *pt, *next;
 
-	smp_wmb();
+	spin_lock_irq(&obj->lock);
+
+	list_for_each_entry_safe(pt, next, &obj->pt_list, link) {
+		fence_set_error(&pt->base, -ENOENT);
+		fence_signal_locked(&pt->base);
+	}
+
+	spin_unlock_irq(&obj->lock);
 
 	sync_timeline_put(obj);
 	return 0;
author maintainer
#106 lore raw

PATCH 101/109 dma-buf/sync_file: hold reference to fence when creating sync_file

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo Padovan <[email protected]>

commit 30cd85dd6edc86ea8d8589efb813f1fad41ef233 upstream.

fence referencing was out of balance. It was not taking any ref to the fence at creating time, but it was putting a reference when freeing the sync file.

This patch fixes the balancing issue by getting a reference for the fence when creating the sync_file.

---
 drivers/dma-buf/sync_file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma-buf/sync_file.c +1 -1
@@ -79,7 +79,7 @@ struct sync_file *sync_file_create(struc
 	if (!sync_file)
 		return NULL;
 
-	sync_file->fence = fence;
+	sync_file->fence = fence_get(fence);
 
 	snprintf(sync_file->name, sizeof(sync_file->name), "%s-%s%llu-%d",
 		 fence->ops->get_driver_name(fence),

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.9.68-stable review

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.68-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.68-rc1

Colin Ian King <[email protected]>
usb: host: fix incorrect updating of offset

Oliver Neukum <[email protected]>
USB: usbfs: Filter flags passed in from user space

Dan Carpenter <[email protected]>
USB: devio: Prevent integer overflow in proc_do_submiturb()

Mateusz Berezecki <[email protected]>
USB: Increase usbfs transfer limit

Masakazu Mokuno <[email protected]>
USB: core: Add type-specific length check of BOS descriptors

Yu Chen <[email protected]>
usb: xhci: fix panic in xhci_free_virt_devices_depth_first

Mike Looijmans <[email protected]>
usb: hub: Cycle HUB power when initialization fails

Daniel Vetter <[email protected]>
dma-buf: Update kerneldoc for sync_file_create

Gustavo Padovan <[email protected]>
dma-buf/sync_file: hold reference to fence when creating sync_file

Dominik Behr <[email protected]>
dma-buf/sw_sync: force signal all unsignaled fences on dying timeline

Chris Wilson <[email protected]>
dma-fence: Introduce drm_fence_set_error() helper

Chris Wilson <[email protected]>

    dma-fence: Wrap querying the fence->status

Chris Wilson <[email protected]>

    dma-fence: Clear fence->status during dma_fence_init()

Gustavo Padovan <[email protected]>
dma-buf/sw_sync: clean up list before signaling the fence

Gustavo Padovan <[email protected]>
dma-buf/sw_sync: move timeline_fence_ops around

Chris Wilson <[email protected]>
dma-buf/sw-sync: Use an rbtree to sort fences in the timeline

Chris Wilson <[email protected]>
dma-buf/sw-sync: Fix locking around sync_timeline lists

Chris Wilson <[email protected]>
dma-buf/sw-sync: sync_pt is private and of fixed size

Chris Wilson <[email protected]>
dma-buf/sw-sync: Reduce irqsave/irqrestore from known context

Chris Wilson <[email protected]>
dma-buf/sw-sync: Prevent user overflow on timeline advance

Chris Wilson <[email protected]>
dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound

Chris Wilson <[email protected]>
dma-buf/dma-fence: Extract __dma_fence_is_later()

Rui Sousa <[email protected]>
net: fec: fix multicast filtering hardware setup

Mart van Santen <[email protected]>
xen-netback: vif counters from int/long to u64

Hans Verkuil <[email protected]>
cec: initiator should be the same as the destination for, poll

Ross Lagerwall <[email protected]>
xen-netfront: Improve error handling during initialization

Jan Kara <[email protected]>

    mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

Alexey Kardashevskiy <[email protected]>
vfio/spapr: Fix missing mutex unlock when creating a window

Ivan Vecera <[email protected]>
be2net: fix initial MAC setting

Vincent <[email protected]>
net: thunderx: avoid dereferencing xcv when NULL

Sean Nyekjaer <[email protected]>
net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause

Andreas Schultz <[email protected]>
gtp: fix cross netns recv on gtp socket

Andreas Schultz <[email protected]>
gtp: clear DF bit on GTP packet tx

Sagi Grimberg <[email protected]>
nvmet: cancel fatal error and flush async work before free controller

Mike Looijmans <[email protected]>
i2c: i2c-cadence: Initialize configuration before probing devices

Jason Baron <[email protected]>
tcp: correct memory barrier usage in tcp_check_space()

Iago Abal <[email protected]>
dmaengine: pl330: fix double lock

Parthasarathy Bhuvaragan <[email protected]>
tipc: fix cleanup at module unload

Parthasarathy Bhuvaragan <[email protected]>
tipc: fix nametbl_lock soft lockup at module exit

Ram Amrani <[email protected]>
RDMA/qedr: Fix RDMA CM loopback

Ram Amrani <[email protected]>
RDMA/qedr: Return success when not changing QP state

Johannes Berg <[email protected]>
mac80211: don't try to sleep in rate_control_rate_init()

Xiangliang Yu <[email protected]>
drm/amdgpu: fix unload driver issue for virtual display

Kevin Hao <[email protected]>
x86/fpu: Set the xcomp_bv when we fake up a XSAVES area

Colin Ian King <[email protected]>
net: sctp: fix array overrun read on sctp_timer_tbl

Andrzej Hajda <[email protected]>
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement

Rex Zhu <[email protected]>
drm/amdgpu: fix bug set incorrect value to vce register

Quinn Tran <[email protected]>
qla2xxx: Fix wrong IOCB type assumption

Reza Arbab <[email protected]>
powerpc/mm: Fix memory hotplug BUG() on radix

Jiri Olsa <[email protected]>
perf/x86/intel: Account interrupts for PEBS errors

Trond Myklebust <[email protected]>
NFSv4: Fix client recovery when server reboots multiple times

Michal Kazior <[email protected]>
mac80211: prevent skb/txq mismatch

Christoffer Dall <[email protected]>
KVM: arm/arm64: Fix occasional warning from the timer work function

Andrzej Hajda <[email protected]>
drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled

Andrzej Hajda <[email protected]>
drm/exynos/decon5433: update shadow registers iff there are active windows

Benjamin Coddington <[email protected]>

    nfs: Don't take a reference on fl->fl_file for LOCK operation

Kazuya Mizuguchi <[email protected]>
ravb: Remove Rx overflow log messages

Johannes Berg <[email protected]>
mac80211: calculate min channel width correctly

Michal Hocko <[email protected]>
mm: fix remote numa hits statistics

Stephen Boyd <[email protected]>
net: qrtr: Mark 'buf' as little endian

Eric W. Biederman <[email protected]>
libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount

Vlad Tsyrklevich <[email protected]>
net/appletalk: Fix kernel memory disclosure

Ivan Vecera <[email protected]>
be2net: fix unicast list filling

Ivan Vecera <[email protected]>
be2net: fix accesses to unicast list

David Forster <[email protected]>
vti6: fix device register to report IFLA_INFO_KIND

Peter Ujfalusi <[email protected]>
ARM: OMAP1: DMA: Correct the number of logical channels

Adam Ford <[email protected]>
ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate

Florian Fainelli <[email protected]>
net: systemport: Pad packet before inserting TSB

Florian Fainelli <[email protected]>
net: systemport: Utilize skb_put_padto()

Varun Prakash <[email protected]>
libcxgb: fix error check for ip6_route_output()

Vincent Pelletier <[email protected]>
usb: gadget: f_fs: Fix ExtCompat descriptor validation

M'boumba Cedric Madianga <[email protected]>
dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

M'boumba Cedric Madianga <[email protected]>
dmaengine: stm32-dma: Set correct args number for DMA request from DT

Guillaume Nault <[email protected]>
l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups

Slava Shwartsman <[email protected]>
net/mlx4_en: Fix type mismatch for 32-bit systems

Jan Kara <[email protected]>
dax: Avoid page invalidation races and unnecessary radix tree traversals

Ladislav Michl <[email protected]>
iio: adc: ti-ads1015: add 10% to conversion wait time

Arnaldo Carvalho de Melo <[email protected]>
tools include: Do not use poison with C++

Masami Hiramatsu <[email protected]>
kprobes/x86: Disable preemption in ftrace-based jprobes

Thomas Richter <[email protected]>
perf test attr: Fix ignored test case result

Ben Hutchings <[email protected]>
usbip: tools: Install all headers needed for libusbip development

Jibin Xu <[email protected]>
sysrq : fix Show Regs call trace on ARM

Gustavo A. R. Silva <[email protected]>
EDAC, sb_edac: Fix missing break in switch

Dave Hansen <[email protected]>
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()

Aaron Sierra <[email protected]>

    serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X

Alexey Khoroshilov <[email protected]>
usb: phy: tahvo: fix error handling in tahvo_usb_probe()

John Stultz <[email protected]>
usb: dwc2: Error out of dwc2_hsotg_ep_disable() if we're in host mode

John Stultz <[email protected]>
usb: dwc2: Fix UDC state tracking

Subhash Jadavani <[email protected]>
mmc: sdhci-msm: fix issue with power irq

Johan Hovold <[email protected]>
spi: spi-axi: fix potential use-after-free after deregistration

Hiromitsu Yamasaki <[email protected]>
spi: sh-msiof: Fix DMA transfer size check

Colin Ian King <[email protected]>
staging: rtl8188eu: avoid a null dereference on pmlmepriv

Lukas Wunner <[email protected]>
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()

Greg Ungerer <[email protected]>
m68k: fix ColdFire node shift size calculation

Bryan O'Donoghue <[email protected]>
staging: greybus: loopback: Fix iteration count on async path

Andy Lutomirski <[email protected]>
selftests/x86/ldt_get: Add a few additional tests for limits

Christian Borntraeger <[email protected]>
s390/pci: do not require AIS facility

Boshi Wang <[email protected]>
ima: fix hash algorithm initialization

Sebastian Sjoholm <[email protected]>
USB: serial: option: add Quectel BG96 id

Heiko Carstens <[email protected]>
s390/runtime instrumentation: simplify task exit handling

Matt Wilson <[email protected]>
serial: 8250_pci: Add Amazon PCI serial device ID

Kai-Heng Feng <[email protected]>
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub

Hans de Goede <[email protected]>
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices

Wang Nan <[email protected]>
mm, oom_reaper: gather each vma to prevent leaking TLB entry

Horia Geantă <[email protected]>
Revert "crypto: caam - get rid of tasklet"

Stefan Agner <[email protected]>
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()

Stefan Agner <[email protected]>
drm/fsl-dcu: avoid disabling pixel clock twice on suspend

Rui Hua <[email protected]>
bcache: recover data from backing when data is clean

Coly Li <[email protected]>
bcache: only permit to recovery read error when cache device is clean

-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/arm/mach-omap1/dma.c                         |  16 +-
 arch/arm/mach-omap2/pdata-quirks.c                |   2 +-
 arch/m68k/mm/mcfmmu.c                             |   2 +-
 arch/powerpc/include/asm/book3s/64/hash.h         |   4 +
 arch/powerpc/mm/hash_utils_64.c                   |   4 +-
 arch/powerpc/mm/pgtable-book3s64.c                |  18 ++
 arch/s390/include/asm/pci_insn.h                  |   2 +-
 arch/s390/include/asm/runtime_instr.h             |   4 +-
 arch/s390/kernel/process.c                        |   3 +-
 arch/s390/kernel/runtime_instr.c                  |  30 +--
 arch/s390/pci/pci.c                               |   5 +-
 arch/s390/pci/pci_insn.c                          |   6 +-
 arch/x86/events/intel/ds.c                        |   6 +-
 arch/x86/include/asm/syscalls.h                   |   2 +-
 arch/x86/kernel/fpu/xstate.c                      |   1 +
 arch/x86/kernel/kprobes/ftrace.c                  |  23 ++-
 arch/x86/kernel/ldt.c                             |  16 +-
 arch/x86/um/ldt.c                                 |   7 +-
 drivers/crypto/caam/intern.h                      |   1 +
 drivers/crypto/caam/jr.c                          |  25 ++-
 drivers/dma-buf/fence.c                           |  26 +++
 drivers/dma-buf/sw_sync.c                         | 211 +++++++++++++---------
 drivers/dma-buf/sync_debug.c                      |  39 ++--
 drivers/dma-buf/sync_debug.h                      |  27 ++-
 drivers/dma-buf/sync_file.c                       |  22 +--
 drivers/dma/pl330.c                               |  19 +-
 drivers/dma/stm32-dma.c                           |  17 +-
 drivers/edac/sb_edac.c                            |   1 +
 drivers/gpu/drm/amd/amdgpu/dce_virtual.c          |   5 +-
 drivers/gpu/drm/amd/amdgpu/vce_v3_0.c             |   2 +-
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c     |   9 +-
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c         |   3 +-
 drivers/i2c/busses/i2c-cadence.c                  |   8 +-
 drivers/iio/adc/ti-ads1015.c                      |   1 +
 drivers/infiniband/hw/qedr/qedr_cm.c              |   4 +-
 drivers/infiniband/hw/qedr/verbs.c                |   2 +-
 drivers/md/bcache/request.c                       |   9 +-
 drivers/mmc/host/sdhci-msm.c                      |  18 ++
 drivers/net/appletalk/ipddp.c                     |   2 +-
 drivers/net/ethernet/broadcom/bcmsysport.c        |  23 ++-
 drivers/net/ethernet/cavium/thunder/thunder_xcv.c |   3 +-
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c |  12 +-
 drivers/net/ethernet/emulex/benet/be_main.c       |  45 +++--
 drivers/net/ethernet/freescale/fec_main.c         |  23 +--
 drivers/net/ethernet/mellanox/mlx4/en_clock.c     |   8 +-
 drivers/net/ethernet/renesas/ravb_main.c          |   8 +-
 drivers/net/gtp.c                                 |  12 +-
 drivers/net/phy/micrel.c                          |   2 +-
 drivers/net/xen-netback/common.h                  |   8 +-
 drivers/net/xen-netback/interface.c               |   8 +-
 drivers/net/xen-netfront.c                        |  29 ++-
 drivers/nvme/target/core.c                        |   3 +
 drivers/scsi/qla2xxx/qla_target.c                 |   8 +-
 drivers/spi/spi-axi-spi-engine.c                  |   4 +-
 drivers/spi/spi-sh-msiof.c                        |   2 +-
 drivers/staging/greybus/loopback.c                |   4 +-
 drivers/staging/lustre/lustre/llite/llite_mmap.c  |   4 +-
 drivers/staging/media/cec/cec-adap.c              |   7 +-
 drivers/staging/rtl8188eu/core/rtw_mlme.c         |   6 +-
 drivers/tty/serial/8250/8250_fintek.c             |   2 +-
 drivers/tty/serial/8250/8250_pci.c                |   3 +
 drivers/tty/serial/8250/8250_port.c               |   5 +-
 drivers/tty/sysrq.c                               |   9 +-
 drivers/usb/core/config.c                         |  28 ++-
 drivers/usb/core/devio.c                          |  56 +++---
 drivers/usb/core/hub.c                            |   9 +
 drivers/usb/core/quirks.c                         |   3 +
 drivers/usb/dwc2/gadget.c                         |   7 +
 drivers/usb/gadget/function/f_fs.c                |   2 +-
 drivers/usb/host/ehci-dbg.c                       |   2 +-
 drivers/usb/host/xhci-mem.c                       |   7 +
 drivers/usb/phy/phy-tahvo.c                       |   3 +-
 drivers/usb/serial/option.c                       |   3 +
 drivers/usb/storage/uas-detect.h                  |   4 +
 drivers/vfio/vfio_iommu_spapr_tce.c               |  11 +-
 fs/dax.c                                          |  28 ++-
 fs/libfs.c                                        |   3 +-
 fs/nfs/nfs4proc.c                                 |   3 -
 fs/nfs/nfs4state.c                                |   1 -
 include/linux/buffer_head.h                       |   4 +-
 include/linux/fence.h                             |  67 ++++++-
 include/linux/perf_event.h                        |   1 +
 include/uapi/linux/usb/ch9.h                      |   3 +
 kernel/events/core.c                              |  47 +++--
 mm/oom_kill.c                                     |   7 +-
 mm/page_alloc.c                                   |  15 +-
 net/ipv4/tcp_input.c                              |   2 +-
 net/ipv6/ip6_vti.c                                |   2 +-
 net/l2tp/l2tp_ip.c                                |  19 +-
 net/l2tp/l2tp_ip6.c                               |  20 +-
 net/mac80211/chan.c                               |   3 -
 net/mac80211/tx.c                                 |  17 +-
 net/qrtr/qrtr.c                                   |   4 +-
 net/sctp/debug.c                                  |   2 +-
 net/tipc/server.c                                 |  20 +-
 security/integrity/ima/ima_main.c                 |   4 +
 tools/include/linux/poison.h                      |   5 +
 tools/perf/tests/attr.c                           |   2 +-
 tools/testing/selftests/x86/ldt_gdt.c             |  17 +-
 tools/usb/usbip/Makefile.am                       |   3 +-
 virt/kvm/arm/arch_timer.c                         |   3 -
 102 files changed, 759 insertions(+), 522 deletions(-)
author maintainer
#108 lore raw

PATCH 103/109 usb: hub: Cycle HUB power when initialization fails

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <[email protected]>

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and the connection fails. In particular, the device thinks that it's already set up and running while the host thinks the device still needs to be configured. To work around this issue, power-cycle the hub's output to issue a sort of "reset" to the device. This makes the device restart its state machine and then the initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc usb 1-1.3: device not accepting address 18, error -71 usb 1-1.3: new high-speed USB device number 19 using ci_hdrc usb 1-1.3: device not accepting address 19, error -71 usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc usb-storage 1-1.3:1.2: USB Mass Storage device detected

---
 drivers/usb/core/hub.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/usb/core/hub.c +9 -0
@@ -4925,6 +4925,15 @@ loop:
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
+
+		/* When halfway through our retry count, power-cycle the port */
+		if (i == (SET_CONFIG_TRIES / 2) - 1) {
+			dev_info(&port_dev->dev, "attempt power cycle\n");
+			usb_hub_set_port_power(hdev, hub, port1, false);
+			msleep(2 * hub_power_on_good_delay(hub));
+			usb_hub_set_port_power(hdev, hub, port1, true);
+			msleep(hub_power_on_good_delay(hub));
+		}
 	}
 	if (hub->hdev->parent ||
 			!hcd->driver->port_handed_over ||
author maintainer
#109 lore raw

PATCH 104/109 usb: xhci: fix panic in xhci_free_virt_devices_depth_first

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Chen <[email protected]>

commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream.

Check vdev->real_port 0 to avoid panic

[    9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108
[    9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570
[    9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8
[    9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0
[    9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8
[    9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70
[    9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108
[    9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40
[    9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120
[    9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210
[    9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0
[    9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488
[    9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8
[    9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490
[    9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0
[    9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100
[    9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50

The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4.

Fixes ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first")
Cc Guenter Roeck <[email protected]>
---
 drivers/usb/host/xhci-mem.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/usb/host/xhci-mem.c +7 -0
@@ -996,6 +996,12 @@ void xhci_free_virt_devices_depth_first(
 	if (!vdev)
 		return;
 
+	if (vdev->real_port == 0 ||
+			vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "Bad vdev->real_port.\n");
+		goto out;
+	}
+
 	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
 	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
 		/* is this a hub device that added a tt_info to the tts list */
@@ -1009,6 +1015,7 @@ void xhci_free_virt_devices_depth_first(
 			}
 		}
 	}
+out:
 	/* we are now at a leaf device */
 	xhci_free_virt_device(xhci, slot_id);
 }
author maintainer
#110 lore raw

PATCH 105/109 USB: core: Add type-specific length check of BOS descriptors

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masakazu Mokuno <[email protected]>

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.

As most of BOS descriptors are longer in length than their header 'struct usb_dev_cap_header', comparing solely with it is not sufficient to avoid out-of-bounds access to BOS descriptors.

This patch adds descriptor type specific length check in usb_get_bos_descriptor() to fix the issue.

---
 drivers/usb/core/config.c    |   28 ++++++++++++++++++++++++----
 include/uapi/linux/usb/ch9.h |    3 +++
 2 files changed, 27 insertions(+), 4 deletions(-)
drivers/usb/core/config.c +24 -4
@@ -900,14 +900,25 @@ void usb_release_bos_descriptor(struct u
 	}
 }
 
+static const __u8 bos_desc_len[256] = {
+	[USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE,
+	[USB_CAP_TYPE_EXT]          = USB_DT_USB_EXT_CAP_SIZE,
+	[USB_SS_CAP_TYPE]           = USB_DT_USB_SS_CAP_SIZE,
+	[USB_SSP_CAP_TYPE]          = USB_DT_USB_SSP_CAP_SIZE(1),
+	[CONTAINER_ID_TYPE]         = USB_DT_USB_SS_CONTN_ID_SIZE,
+	[USB_PTM_CAP_TYPE]          = USB_DT_USB_PTM_ID_SIZE,
+};
+
 /* Get BOS descriptor set */
 int usb_get_bos_descriptor(struct usb_device *dev)
 {
 	struct device *ddev = &dev->dev;
 	struct usb_bos_descriptor *bos;
 	struct usb_dev_cap_header *cap;
+	struct usb_ssp_cap_descriptor *ssp_cap;
 	unsigned char *buffer;
-	int length, total_len, num, i;
+	int length, total_len, num, i, ssac;
+	__u8 cap_type;
 	int ret;
 
 	bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
@@ -960,7 +971,13 @@ int usb_get_bos_descriptor(struct usb_de
 			dev->bos->desc->bNumDeviceCaps = i;
 			break;
 		}
+		cap_type = cap->bDevCapabilityType;
 		length = cap->bLength;
+		if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) {
+			dev->bos->desc->bNumDeviceCaps = i;
+			break;
+		}
+
 		total_len -= length;
 
 		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
@@ -968,7 +985,7 @@ int usb_get_bos_descriptor(struct usb_de
 			continue;
 		}
 
-		switch (cap->bDevCapabilityType) {
+		switch (cap_type) {
 		case USB_CAP_TYPE_WIRELESS_USB:
 			/* Wireless USB cap descriptor is handled by wusb */
 			break;
@@ -981,8 +998,11 @@ int usb_get_bos_descriptor(struct usb_de
 				(struct usb_ss_cap_descriptor *)buffer;
 			break;
 		case USB_SSP_CAP_TYPE:
-			dev->bos->ssp_cap =
-				(struct usb_ssp_cap_descriptor *)buffer;
+			ssp_cap = (struct usb_ssp_cap_descriptor *)buffer;
+			ssac = (le32_to_cpu(ssp_cap->bmAttributes) &
+				USB_SSP_SUBLINK_SPEED_ATTRIBS) + 1;
+			if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac))
+				dev->bos->ssp_cap = ssp_cap;
 			break;
 		case CONTAINER_ID_TYPE:
 			dev->bos->ss_id =
include/uapi/linux/usb/ch9.h +3 -0
@@ -854,6 +854,8 @@ struct usb_wireless_cap_descriptor {	/*
 	__u8  bReserved;
 } __attribute__((packed));
 
+#define USB_DT_USB_WIRELESS_CAP_SIZE	11
+
 /* USB 2.0 Extension descriptor */
 #define	USB_CAP_TYPE_EXT		2
 
@@ -1046,6 +1048,7 @@ struct usb_ptm_cap_descriptor {
 	__u8  bDevCapabilityType;
 } __attribute__((packed));
 
+#define USB_DT_USB_PTM_ID_SIZE		3
 /*
  * The size of the descriptor for the Sublink Speed Attribute Count
  * (SSAC) specified in bmAttributes[4:0].
author maintainer
#112 lore raw

PATCH 107/109 USB: devio: Prevent integer overflow in proc_do_submiturb()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but we removed it. It turns out that it's still required. The uurb->buffer_length variable is a signed integer and it's controlled by the user. It can lead to an integer overflow when we do:

	num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

	num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

It's the first addition which can overflow.

Fixes 1129d270cbfb ("USB: Increase usbfs transfer limit")
---
 drivers/usb/core/devio.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/usb/core/devio.c +5 -0
@@ -139,6 +139,9 @@ module_param(usbfs_memory_mb, uint, 0644
 MODULE_PARM_DESC(usbfs_memory_mb,
 		"maximum MB allowed for usbfs buffers (0 = no limit)");
 
+/* Hard limit, necessary to avoid arithmetic overflow */
+#define USBFS_XFER_MAX         (UINT_MAX / 2 - 1000000)
+
 static atomic64_t usbfs_memory_usage;	/* Total memory currently allocated */
 
 /* Check whether it's okay to allocate more memory for a transfer */
@@ -1459,6 +1462,8 @@ static int proc_do_submiturb(struct usb_
 				USBDEVFS_URB_ZERO_PACKET |
 				USBDEVFS_URB_NO_INTERRUPT))
 		return -EINVAL;
+	if ((unsigned int)uurb->buffer_length >= USBFS_XFER_MAX)
+		return -EINVAL;
 	if (uurb->buffer_length > 0 && !uurb->buffer)
 		return -EINVAL;
 	if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
author maintainer
#113 lore raw

PATCH 108/109 USB: usbfs: Filter flags passed in from user space

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <[email protected]>

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints. Improve sanity checking.

---
 drivers/usb/core/devio.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/usb/core/devio.c +9 -5
@@ -1454,14 +1454,18 @@ static int proc_do_submiturb(struct usb_
 	int number_of_packets = 0;
 	unsigned int stream_id = 0;
 	void *buf;
-
-	if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP |
-				USBDEVFS_URB_SHORT_NOT_OK |
+	unsigned long mask =	USBDEVFS_URB_SHORT_NOT_OK |
 				USBDEVFS_URB_BULK_CONTINUATION |
 				USBDEVFS_URB_NO_FSBR |
 				USBDEVFS_URB_ZERO_PACKET |
-				USBDEVFS_URB_NO_INTERRUPT))
-		return -EINVAL;
+				USBDEVFS_URB_NO_INTERRUPT;
+	/* USBDEVFS_URB_ISO_ASAP is a special case */
+	if (uurb->type == USBDEVFS_URB_TYPE_ISO)
+		mask |= USBDEVFS_URB_ISO_ASAP;
+
+	if (uurb->flags & ~mask)
+			return -EINVAL;
+
 	if ((unsigned int)uurb->buffer_length >= USBFS_XFER_MAX)
 		return -EINVAL;
 	if (uurb->buffer_length > 0 && !uurb->buffer)
author maintainer
#114 lore raw

PATCH 109/109 usb: host: fix incorrect updating of offset

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Colin Ian King <[email protected]>

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should be offset otherwise the loop just reads the same capability value and loops forever. Thanks to Alan Stern for pointing out the correct fix to my original fix. Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp' is never read

Fixes d49d43174400 ("USB: misc ehci updates")
---
 drivers/usb/host/ehci-dbg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/ehci-dbg.c +1 -1
@@ -837,7 +837,7 @@ static ssize_t fill_registers_buffer(str
 			default:		/* unknown */
 				break;
 			}
-			temp = (cap >> 8) & 0xff;
+			offset = (cap >> 8) & 0xff;
 		}
 	}
 #endif
author maintainer
#10 lore raw

PATCH 11/109 USB: serial: option: add Quectel BG96 id

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sebastian Sjoholm <[email protected]>

commit c654b21ede93845863597de9ad774fd30db5f2ab upstream.

Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96.

---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/serial/option.c +3 -0
@@ -241,6 +241,7 @@ static void option_instat_callback(struc
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
 #define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_BG96			0x0296
 
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001
@@ -1185,6 +1186,8 @@ static const struct usb_device_id option
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
author maintainer
#2 lore raw

PATCH 2/109 bcache: recover data from backing when data is clean

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rui Hua <[email protected]>

commit e393aa2446150536929140739f09c6ecbcbea7f0 upstream.

When we send a read request and hit the clean data in cache device, there is a situation called cache read race in bcache(see the commit in the tail of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight, and we could then end up reading the wrong data. We guard against this by checking (in bch_cache_read_endio()) if the pointer is stale again; if so, we treat it as an error (s->iop.error = -EINTR) and reread from the backing device (but we don't pass that error up anywhere)

It should be noted that cache read race happened under normal circumstances, not the circumstance when SSD failed, it was counted and shown in /sys/fs/bcache/XXX/internal/cache_read_races.

Without this patch, when we use writeback mode, we will never reread from the backing device when cache read race happened, until the whole cache device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR) will be passed up, at last, user will receive -EINTR when it's bio end, this is not suitable, and wield to up-application.

In this patch, we use s->read_dirty_data to judge whether the read request hit dirty data in cache device, it is safe to reread data from the backing device when the read request hit clean data. This can not only handle cache read race, but also recover data when failed read request from cache device.

[edited by mlyle to fix up whitespace, commit log title, comment spelling]

Fixes d59b23795933 ("bcache: only permit to recovery read error when cache device is clean")
---
 drivers/md/bcache/request.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/md/bcache/request.c +6 -7
@@ -702,16 +702,15 @@ static void cached_dev_read_error(struct
 {
 	struct search *s = container_of(cl, struct search, cl);
 	struct bio *bio = &s->bio.bio;
-	struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
 
 	/*
-	 * If cache device is dirty (dc->has_dirty is non-zero), then
-	 * recovery a failed read request from cached device may get a
-	 * stale data back. So read failure recovery is only permitted
-	 * when cache device is clean.
+	 * If read request hit dirty data (s->read_dirty_data is true),
+	 * then recovery a failed read request from cached device may
+	 * get a stale data back. So read failure recovery is only
+	 * permitted when read request hit clean data in cache device,
+	 * or when cache read race happened.
 	 */
-	if (s->recoverable &&
-	    (dc && !atomic_read(&dc->has_dirty))) {
+	if (s->recoverable && !s->read_dirty_data) {
 		/* Retry from the backing device: */
 		trace_bcache_read_retry(s->orig_bio);
 
author maintainer
#3 lore raw

PATCH 3/109 drm/fsl-dcu: avoid disabling pixel clock twice on suspend

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Agner <[email protected]>

commit 9306e996574f7f57136a62e49cd0075f85713623 upstream.

With commit 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") the pixel clock is controlled by the CRTC code. Disabling the pixel clock in suspend leads to a warning due to the second clk_disable_unprepare call:

  WARNING: CPU: 0 PID: 359 at drivers/clk/clk.c:594 clk_core_disable+0x8c/0x90

Remove clk_disable_unprepare call for pixel clock to avoid unbalanced clock disable on suspend.

Fixes 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC")
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c |    1 -
 1 file changed, 1 deletion(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +0 -1
@@ -243,7 +243,6 @@ static int fsl_dcu_drm_pm_suspend(struct
 		return PTR_ERR(fsl_dev->state);
 	}
 
-	clk_disable_unprepare(fsl_dev->pix_clk);
 	clk_disable_unprepare(fsl_dev->clk);
 
 	return 0;
author maintainer
#4 lore raw

PATCH 4/109 drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Agner <[email protected]>

commit 9fd99f4f3f5e13ce959900ae57d64b1bdb51d823 upstream.

The resume helpers wait for a vblank to occurre hence IRQ need to be enabled. This avoids a warning as follows during resume:

  WARNING: CPU: 0 PID: 314 at drivers/gpu/drm/drm_atomic_helper.c:1249 drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288
  [CRTC:28:crtc-0] vblank wait timed out
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +1 -1
@@ -265,6 +265,7 @@ static int fsl_dcu_drm_pm_resume(struct
 	if (fsl_dev->tcon)
 		fsl_tcon_bypass_enable(fsl_dev->tcon);
 	fsl_dcu_drm_init_planes(fsl_dev->drm);
+	enable_irq(fsl_dev->irq);
 	drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
 
 	console_lock();
@@ -272,7 +273,6 @@ static int fsl_dcu_drm_pm_resume(struct
 	console_unlock();
 
 	drm_kms_helper_poll_enable(fsl_dev->drm);
-	enable_irq(fsl_dev->irq);
 
 	return 0;
 }
author maintainer
#6 lore raw

PATCH 7/109 uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede <[email protected]>

commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream.

We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices.

---
 drivers/usb/storage/uas-detect.h |    4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/storage/uas-detect.h +4 -0
@@ -111,6 +111,10 @@ static int uas_use_uas_driver(struct usb
 		}
 	}
 
+	/* All Seagate disk enclosures have broken ATA pass-through support */
+	if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2)
+		flags |= US_FL_NO_ATA_1X;
+
 	usb_stor_adjust_quirks(udev, &flags);
 
 	if (flags & US_FL_IGNORE_UAS) {
author maintainer
#7 lore raw

PATCH 8/109 usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <[email protected]>

commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream.

KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153.

Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work.

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/core/quirks.c +3 -0
@@ -151,6 +151,9 @@ static const struct usb_device_id usb_qu
 	/* appletouch */
 	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */
+	{ USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
 	{ USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
 
author maintainer
#8 lore raw

PATCH 9/109 serial: 8250_pci: Add Amazon PCI serial device ID

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matt Wilson <[email protected]>

commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream.

This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API).

[1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html

---
 drivers/tty/serial/8250/8250_pci.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/tty/serial/8250/8250_pci.c +3 -0
@@ -5568,6 +5568,9 @@ static struct pci_device_id serial_pci_t
 	{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
 	{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
 
+	/* Amazon PCI serial device */
+	{ PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
author maintainer
#13 lore raw

PATCH 14/109 selftests/x86/ldt_get: Add a few additional tests for limits

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <[email protected]>

[ Upstream commit fec8f5ae1715a01c72ad52cb2ecd8aacaf142302 ]

We weren't testing the .limit and .limit_in_pages fields very well. Add more tests.

This addition seems to trigger the "bits 16:19 are undefined" issue that was fixed in an earlier patch. I think that, at least on my CPU, the high nibble of the limit ends in LAR bits 16:19.

---
 tools/testing/selftests/x86/ldt_gdt.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
tools/testing/selftests/x86/ldt_gdt.c +16 -1
@@ -360,9 +360,24 @@ static void do_simple_tests(void)
 	install_invalid(&desc, false);
 
 	desc.seg_not_present = 0;
-	desc.read_exec_only = 0;
 	desc.seg_32bit = 1;
+	desc.read_exec_only = 0;
+	desc.limit = 0xfffff;
+
 	install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S | AR_P | AR_DB);
+
+	desc.limit_in_pages = 1;
+
+	install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA | AR_S | AR_P | AR_DB | AR_G);
+	desc.read_exec_only = 1;
+	install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA | AR_S | AR_P | AR_DB | AR_G);
+	desc.contents = 1;
+	desc.read_exec_only = 0;
+	install_valid(&desc, AR_DPL3 | AR_TYPE_RWDATA_EXPDOWN | AR_S | AR_P | AR_DB | AR_G);
+	desc.read_exec_only = 1;
+	install_valid(&desc, AR_DPL3 | AR_TYPE_RODATA_EXPDOWN | AR_S | AR_P | AR_DB | AR_G);
+
+	desc.limit = 0;
 	install_invalid(&desc, true);
 }
 
author maintainer
#23 lore raw

PATCH 24/109 usb: phy: tahvo: fix error handling in tahvo_usb_probe()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <[email protected]>

[ Upstream commit ce035409bfa892a2fabb89720b542e1b335c3426 ]

If devm_extcon_dev_allocate() fails, we should disable clk before return.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes 860d2686fda7 ("usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace deprecated API")
---
 drivers/usb/phy/phy-tahvo.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/phy/phy-tahvo.c +2 -1
@@ -368,7 +368,8 @@ static int tahvo_usb_probe(struct platfo
 	tu->extcon = devm_extcon_dev_allocate(&pdev->dev, tahvo_cable);
 	if (IS_ERR(tu->extcon)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		return -ENOMEM;
+		ret = PTR_ERR(tu->extcon);
+		goto err_disable_clk;
 	}
 
 	ret = devm_extcon_dev_register(&pdev->dev, tu->extcon);
author maintainer
#14 lore raw

PATCH 15/109 staging: greybus: loopback: Fix iteration count on async path

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <[email protected]>

[ Upstream commit 44b02da39210e6dd67e39ff1f48d30c56d384240 ]

Commit 12927835d211 ("greybus: loopback: Add asynchronous bi-directional support") does what it says on the tin - namely, adds support for asynchronous bi-directional loopback operations.

What it neglects to do though is increment the per-connection gb->iteration_count on an asynchronous operation error. This patch fixes that omission.

Fixes 12927835d211 ("greybus: loopback: Add asynchronous bi-directional support")
---
 drivers/staging/greybus/loopback.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/staging/greybus/loopback.c +3 -1
@@ -1034,8 +1034,10 @@ static int gb_loopback_fn(void *data)
 				error = gb_loopback_async_sink(gb, size);
 			}
 
-			if (error)
+			if (error) {
 				gb->error++;
+				gb->iteration_count++;
+			}
 		} else {
 			/* We are effectively single threaded here */
 			if (type == GB_LOOPBACK_TYPE_PING)
author maintainer
#15 lore raw

PATCH 16/109 m68k: fix ColdFire node shift size calculation

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Ungerer <[email protected]>

[ Upstream commit f55ab8f27548ff3431a6567d400c6757c49fd520 ]

The m68k pg_data_table is a fix size array defined in arch/m68k/mm/init.c. Index numbers within it are defined based on memory size. But for Coldfire these don't take into account a non-zero physical RAM base address, and this causes us to access past the end of this array at system start time.

Change the node shift calculation so that we keep the index inside its range.

---
 arch/m68k/mm/mcfmmu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/m68k/mm/mcfmmu.c +1 -1
@@ -169,7 +169,7 @@ void __init cf_bootmem_alloc(void)
 	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
 	high_memory = (void *)_ramend;
 
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+	m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 
 	/* setup bootmem data */
author maintainer
#16 lore raw

PATCH 17/109 serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukas Wunner <[email protected]>

[ Upstream commit 3236a965486ba0c6043cf2c7b51943d8b382ae29 ]

This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening.

Fixes 28e3fb6c4dce ("serial: Add support for Fintek F81216A LPC to 4 UART")
Cc Ricardo Ribalda Delgado <[email protected]>
Cc "Ji-Ze Hong (Peter Hong)" <[email protected]>
---
 drivers/tty/serial/8250/8250_fintek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/8250/8250_fintek.c +1 -1
@@ -121,7 +121,7 @@ static int fintek_8250_rs485_config(stru
 
 	if ((!!(rs485->flags & SER_RS485_RTS_ON_SEND)) ==
 			(!!(rs485->flags & SER_RS485_RTS_AFTER_SEND)))
-		rs485->flags &= SER_RS485_ENABLED;
+		rs485->flags &= ~SER_RS485_ENABLED;
 	else
 		config |= RS485_URA;
 
author maintainer
#17 lore raw

PATCH 18/109 staging: rtl8188eu: avoid a null dereference on pmlmepriv

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Colin Ian King <[email protected]>

[ Upstream commit 123c0aab0050cd0e07ce18e453389fbbb0a5a425 ]

There is a check on pmlmepriv before dereferencing it when vfree'ing pmlmepriv->free_bss_buf however the previous call to rtw_free_mlme_priv_ie_data deferences pmlmepriv causing a null pointer deference if it is null. Avoid this by also calling rtw_free_mlme_priv_ie_data if the pointer is non-null.

Detected by CoverityScan, CID#1230262 ("Dereference before null check")

Fixes 7b464c9fa5cc ("staging: r8188eu: Add files for new driver - part 4")
---
 drivers/staging/rtl8188eu/core/rtw_mlme.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8188eu/core/rtw_mlme.c +3 -3
@@ -107,10 +107,10 @@ void rtw_free_mlme_priv_ie_data(struct m
 
 void rtw_free_mlme_priv(struct mlme_priv *pmlmepriv)
 {
-	rtw_free_mlme_priv_ie_data(pmlmepriv);
-
-	if (pmlmepriv)
+	if (pmlmepriv) {
+		rtw_free_mlme_priv_ie_data(pmlmepriv);
 		vfree(pmlmepriv->free_bss_buf);
+	}
 }
 
 struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv)
author maintainer
#18 lore raw

PATCH 19/109 spi: sh-msiof: Fix DMA transfer size check

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hiromitsu Yamasaki <[email protected]>

[ Upstream commit 36735783fdb599c94b9c86824583df367c65900b ]

DMA supports 32-bit words only,
even if BITLEN1 of SITMDR2 register is 16bit.

---
 drivers/spi/spi-sh-msiof.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-sh-msiof.c +1 -1
@@ -862,7 +862,7 @@ static int sh_msiof_transfer_one(struct
 				break;
 			copy32 = copy_bswap32;
 		} else if (bits <= 16) {
-			if (l & 1)
+			if (l & 3)
 				break;
 			copy32 = copy_wswap32;
 		} else {
author maintainer
#19 lore raw

PATCH 20/109 spi: spi-axi: fix potential use-after-free after deregistration

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

[ Upstream commit 4d5e0689dc9d5640ad46cdfbe1896b74d8df1661 ]

Take an extra reference to the controller before deregistering it to prevent use-after-free in the interrupt handler in case an interrupt fires before the line is disabled.

Fixes b1353d1c1d45 ("spi: Add Analog Devices AXI SPI Engine controller support")
---
 drivers/spi/spi-axi-spi-engine.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-axi-spi-engine.c +3 -1
@@ -553,7 +553,7 @@ err_put_master:
 
 static int spi_engine_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct spi_engine *spi_engine = spi_master_get_devdata(master);
 	int irq = platform_get_irq(pdev, 0);
 
@@ -561,6 +561,8 @@ static int spi_engine_remove(struct plat
 
 	free_irq(irq, master);
 
+	spi_master_put(master);
+
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
 	writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
author maintainer
#20 lore raw

PATCH 21/109 mmc: sdhci-msm: fix issue with power irq

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Subhash Jadavani <[email protected]>

[ Upstream commit c7ccee224d2d551f712752c4a16947f6529d6506 ]

SDCC controller reset (SW_RST) during probe may trigger power irq if previous status of PWRCTL was either BUS_ON or IO_HIGH_V. So before we enable the power irq interrupt in GIC (by registering the interrupt handler), we need to ensure that any pending power irq interrupt status is acknowledged otherwise power irq interrupt handler would be fired prematurely.

---
 drivers/mmc/host/sdhci-msm.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/mmc/host/sdhci-msm.c +18 -0
@@ -642,6 +642,21 @@ static int sdhci_msm_probe(struct platfo
 			       CORE_VENDOR_SPEC_CAPABILITIES0);
 	}
 
+	/*
+	 * Power on reset state may trigger power irq if previous status of
+	 * PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq
+	 * interrupt in GIC, any pending power irq interrupt should be
+	 * acknowledged. Otherwise power irq interrupt handler would be
+	 * fired prematurely.
+	 */
+	sdhci_msm_voltage_switch(host);
+
+	/*
+	 * Ensure that above writes are propogated before interrupt enablement
+	 * in GIC.
+	 */
+	mb();
+
 	/* Setup IRQ for handling power/voltage tasks with PMIC */
 	msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
 	if (msm_host->pwr_irq < 0) {
@@ -651,6 +666,9 @@ static int sdhci_msm_probe(struct platfo
 		goto clk_disable;
 	}
 
+	/* Enable pwr irq interrupts */
+	writel_relaxed(INT_MASK, msm_host->core_mem + CORE_PWRCTL_MASK);
+
 	ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
 					sdhci_msm_pwr_irq, IRQF_ONESHOT,
 					dev_name(&pdev->dev), host);
author maintainer
#34 lore raw

PATCH 37/109 dmaengine: stm32-dma: Set correct args number for DMA request from DT

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 7e96304d99477de1f70db42035071e56439da817 ]

This patch sets the right number of arguments to be used for DMA clients which request channels from DT.

---
 drivers/dma/stm32-dma.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/dma/stm32-dma.c +2 -5
@@ -976,21 +976,18 @@ static struct dma_chan *stm32_dma_of_xla
 	struct stm32_dma_chan *chan;
 	struct dma_chan *c;
 
-	if (dma_spec->args_count < 3)
+	if (dma_spec->args_count < 4)
 		return NULL;
 
 	cfg.channel_id = dma_spec->args[0];
 	cfg.request_line = dma_spec->args[1];
 	cfg.stream_config = dma_spec->args[2];
-	cfg.threshold = 0;
+	cfg.threshold = dma_spec->args[3];
 
 	if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >=
 				STM32_DMA_MAX_REQUEST_ID))
 		return NULL;
 
-	if (dma_spec->args_count > 3)
-		cfg.threshold = dma_spec->args[3];
-
 	chan = &dmadev->chan[cfg.channel_id];
 
 	c = dma_get_slave_channel(&chan->vchan.chan);
author maintainer
#41 lore raw

PATCH 38/109 dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 57b5a32135c813f2ab669039fb4ec16b30cb3305 ]

chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status, we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue.

---
 drivers/dma/stm32-dma.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/dma/stm32-dma.c +3 -7
@@ -884,7 +884,7 @@ static enum dma_status stm32_dma_tx_stat
 	struct virt_dma_desc *vdesc;
 	enum dma_status status;
 	unsigned long flags;
-	u32 residue;
+	u32 residue = 0;
 
 	status = dma_cookie_status(c, cookie, state);
 	if ((status == DMA_COMPLETE) || (!state))
@@ -892,16 +892,12 @@ static enum dma_status stm32_dma_tx_stat
 
 	spin_lock_irqsave(&chan->vchan.lock, flags);
 	vdesc = vchan_find_desc(&chan->vchan, cookie);
-	if (cookie == chan->desc->vdesc.tx.cookie) {
+	if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
 		residue = stm32_dma_desc_residue(chan, chan->desc,
 						 chan->next_sg);
-	} else if (vdesc) {
+	else if (vdesc)
 		residue = stm32_dma_desc_residue(chan,
 						 to_stm32_dma_desc(vdesc), 0);
-	} else {
-		residue = 0;
-	}
-
 	dma_set_residue(state, residue);
 
 	spin_unlock_irqrestore(&chan->vchan.lock, flags);
author maintainer
#47 lore raw

PATCH 39/109 usb: gadget: f_fs: Fix ExtCompat descriptor validation

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vincent Pelletier <[email protected]>

[ Upstream commit 354bc45bf329494ef6051f3229ef50b9e2a7ea2a ]

Reserved1 is documented as expected to be set to 0, but this test fails when it it set to 0. Reverse the condition.

---
 drivers/usb/gadget/function/f_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/function/f_fs.c +1 -1
@@ -2263,7 +2263,7 @@ static int __ffs_data_do_os_desc(enum ff
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    !d->Reserved1)
+		    d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])
author maintainer
#27 lore raw

PATCH 28/109 sysrq : fix Show Regs call trace on ARM

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jibin Xu <[email protected]>

[ Upstream commit b00bebbc301c8e1f74f230dc82282e56b7e7a6db ]

When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled, echo 1 >/proc/sys/kernel/sysrq
echo p >/proc/sysrq-trigger
kernel will print call trace as below:

sysrq: SysRq : Show Regs

BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435
caller is __this_cpu_preempt_check+0x18/0x20
Call trace:
[<ffffff8008088e80>] dump_backtrace+0x0/0x1d0
[<ffffff8008089074>] show_stack+0x24/0x30
[<ffffff8008447970>] dump_stack+0x90/0xb0
[<ffffff8008463950>] check_preemption_disabled+0x100/0x108
[<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20
[<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40
[<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0
[<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70
[<ffffff8008251e00>] proc_reg_write+0x90/0xd0
[<ffffff80081f1788>] __vfs_write+0x48/0x90
[<ffffff80081f241c>] vfs_write+0xa4/0x190
[<ffffff80081f3354>] SyS_write+0x54/0xb0
[<ffffff80080833f0>] el0_svc_naked+0x24/0x28

This can be seen on a common board like an r-pi3. This happens because when echo p >/proc/sysrq-trigger, get_irq_regs() is called outside of IRQ context, if preemption is enabled in this situation,kernel will print the call trace. Since many prior discussions on the mailing lists have made it clear that get_irq_regs either just returns NULL or stale data when used outside of IRQ context,we simply avoid calling it outside of IRQ context.

---
 drivers/tty/sysrq.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/tty/sysrq.c +7 -2
@@ -243,8 +243,10 @@ static void sysrq_handle_showallcpus(int
 	 * architecture has no support for it:
 	 */
 	if (!trigger_all_cpu_backtrace()) {
-		struct pt_regs *regs = get_irq_regs();
+		struct pt_regs *regs = NULL;
 
+		if (in_irq())
+			regs = get_irq_regs();
 		if (regs) {
 			pr_info("CPU%d:\n", smp_processor_id());
 			show_regs(regs);
@@ -263,7 +265,10 @@ static struct sysrq_key_op sysrq_showall
 
 static void sysrq_handle_showregs(int key)
 {
-	struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = NULL;
+
+	if (in_irq())
+		regs = get_irq_regs();
 	if (regs)
 		show_regs(regs);
 	perf_event_print_debug();
author maintainer
#28 lore raw

PATCH 29/109 usbip: tools: Install all headers needed for libusbip development

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

[ Upstream commit c15562c0dcb2c7f26e891923b784cf1926b8c833 ]

usbip_host_driver.h now depends on several additional headers, which need to be installed along with it.

Fixes 021aed845303 ("staging: usbip: userspace: migrate usbip_host_driver ...")
Fixes 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with ...")
---
 tools/usb/usbip/Makefile.am |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/usb/usbip/Makefile.am +2 -1
@@ -1,6 +1,7 @@
 SUBDIRS := libsrc src
 includedir = @includedir@/usbip
 include_HEADERS := $(addprefix libsrc/, \
-		     usbip_common.h vhci_driver.h usbip_host_driver.h)
+		     usbip_common.h vhci_driver.h usbip_host_driver.h \
+		     list.h sysfs_utils.h usbip_host_common.h)
 
 dist_man_MANS := $(addprefix doc/, usbip.8 usbipd.8)
author maintainer
#25 lore raw

PATCH 26/109 x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Hansen <[email protected]>

[ Upstream commit da20ab35180780e4a6eadc804544f1fa967f3567 ]

We do not have tracepoints for sys_modify_ldt() because we define it directly instead of using the normal SYSCALL_DEFINEx() macros.

However, there is a reason sys_modify_ldt() does not use the macros:
it has an 'int' return type instead of 'unsigned long'. This is a bug, but it's a bug cemented in the ABI.

What does this mean? If we return -EINVAL from a function that returns 'int', we have 0x00000000ffffffea in %rax. But, if we return -EINVAL from a function returning 'unsigned long', we end up with 0xffffffffffffffea in %rax, which is wrong.

To work around this and maintain the 'int' behavior while using the SYSCALL_DEFINEx() macros, so we add a cast to 'unsigned int' in both implementations of sys_modify_ldt().

---
 arch/x86/include/asm/syscalls.h |    2 +-
 arch/x86/kernel/ldt.c           |   16 +++++++++++++---
 arch/x86/um/ldt.c               |    7 +++++--
 3 files changed, 19 insertions(+), 6 deletions(-)
arch/x86/include/asm/syscalls.h +1 -1
@@ -21,7 +21,7 @@ asmlinkage long sys_ioperm(unsigned long
 asmlinkage long sys_iopl(unsigned int);
 
 /* kernel/ldt.c */
-asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
+asmlinkage long sys_modify_ldt(int, void __user *, unsigned long);
 
 /* kernel/signal.c */
 asmlinkage long sys_rt_sigreturn(void);
arch/x86/kernel/ldt.c +13 -3
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/syscalls.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
@@ -271,8 +272,8 @@ out:
 	return error;
 }
 
-asmlinkage int sys_modify_ldt(int func, void __user *ptr,
-			      unsigned long bytecount)
+SYSCALL_DEFINE3(modify_ldt, int , func , void __user * , ptr ,
+		unsigned long , bytecount)
 {
 	int ret = -ENOSYS;
 
@@ -290,5 +291,14 @@ asmlinkage int sys_modify_ldt(int func,
 		ret = write_ldt(ptr, bytecount, 0);
 		break;
 	}
-	return ret;
+	/*
+	 * The SYSCALL_DEFINE() macros give us an 'unsigned long'
+	 * return type, but tht ABI for sys_modify_ldt() expects
+	 * 'int'.  This cast gives us an int-sized value in %rax
+	 * for the return code.  The 'unsigned' is necessary so
+	 * the compiler does not try to sign-extend the negative
+	 * return codes into the high half of the register when
+	 * taking the value from int->long.
+	 */
+	return (unsigned int)ret;
 }
arch/x86/um/ldt.c +5 -2
@@ -6,6 +6,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <asm/unistd.h>
 #include <os.h>
@@ -369,7 +370,9 @@ void free_ldt(struct mm_context *mm)
 	mm->arch.ldt.entry_count = 0;
 }
 
-int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+SYSCALL_DEFINE3(modify_ldt, int , func , void __user * , ptr ,
+		unsigned long , bytecount)
 {
-	return do_modify_ldt_skas(func, ptr, bytecount);
+	/* See non-um modify_ldt() for why we do this cast */
+	return (unsigned int)do_modify_ldt_skas(func, ptr, bytecount);
 }
author maintainer
#49 lore raw

PATCH 41/109 net: systemport: Utilize skb_put_padto()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <[email protected]>

[ Upstream commit bb7da333d0a9f3bddc08f84187b7579a3f68fd24 ]

Since we need to pad our packets, utilize skb_put_padto() which increases skb->len by how much we need to pad, allowing us to eliminate the test on skb->len right below.

---
 drivers/net/ethernet/broadcom/bcmsysport.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bcmsysport.c +2 -3
@@ -1039,13 +1039,12 @@ static netdev_tx_t bcm_sysport_xmit(stru
 	 * (including FCS and tag) because the length verification is done after
 	 * the Broadcom tag is stripped off the ingress packet.
 	 */
-	if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+	if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
 		ret = NETDEV_TX_OK;
 		goto out;
 	}
 
-	skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
-			ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+	skb_len = skb->len;
 
 	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(kdev, mapping)) {
author maintainer
#59 lore raw

PATCH 51/109 mm: fix remote numa hits statistics

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Hocko <[email protected]>

[ Upstream commit 2df26639e708a88dcc22171949da638a9998f3bc ]

Jia He has noticed that commit b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics") has an unintentional side effect that remote node allocation requests are accounted as NUMA_MISS rathat than NUMA_HIT and NUMA_OTHER if such a request doesn't use __GFP_OTHER_NODE.

There are many of these potentially because the flag is used very rarely while we have many users of __alloc_pages_node.

Fix this by simply ignoring __GFP_OTHER_NODE (it can be removed in a follow up patch) and treat all allocations that were satisfied from the preferred zone's node as NUMA_HITS because this is the same node we requested the allocation from in most cases. If this is not the local node then we just account it as NUMA_OTHER rather than NUMA_LOCAL.

One downsize would be that an allocation request for a node which is outside of the mempolicy nodemask would be reported as a hit which is a bit weird but that was the case before b9f00e147f27 already.

---
 mm/page_alloc.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)
mm/page_alloc.c +4 -11
@@ -2592,30 +2592,23 @@ int __isolate_free_page(struct page *pag
  * Update NUMA hit/miss statistics
  *
  * Must be called with interrupts disabled.
- *
- * When __GFP_OTHER_NODE is set assume the node of the preferred
- * zone is the local node. This is useful for daemons who allocate
- * memory on behalf of other processes.
  */
 static inline void zone_statistics(struct zone *preferred_zone, struct zone *z,
 								gfp_t flags)
 {
 #ifdef CONFIG_NUMA
-	int local_nid = numa_node_id();
 	enum zone_stat_item local_stat = NUMA_LOCAL;
 
-	if (unlikely(flags & __GFP_OTHER_NODE)) {
+	if (z->node != numa_node_id())
 		local_stat = NUMA_OTHER;
-		local_nid = preferred_zone->node;
-	}
 
-	if (z->node == local_nid) {
+	if (z->node == preferred_zone->node)
 		__inc_zone_state(z, NUMA_HIT);
-		__inc_zone_state(z, local_stat);
-	} else {
+	else {
 		__inc_zone_state(z, NUMA_MISS);
 		__inc_zone_state(preferred_zone, NUMA_FOREIGN);
 	}
+	__inc_zone_state(z, local_stat);
 #endif
 }
 
author maintainer
#60 lore raw

PATCH 52/109 mac80211: calculate min channel width correctly

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 96aa2e7cf126773b16c6c19b7474a8a38d3c707e ]

In the current minimum chandef code there's an issue in that the recalculation can happen after rate control is initialized for a station that has a wider bandwidth than the current chanctx, and then rate control can immediately start using those higher rates which could cause problems.

Observe that first of all that this problem is because we don't take non-associated and non-uploaded stations into account. The restriction to non-associated is quite pointless and is one of the causes for the problem described above, since the rate init will happen before the station is set to associated; no frames could actually be sent until associated, but the rate table can already contain higher rates and that might cause problems.

Also, rejecting non-uploaded stations is wrong, since the rate control can select higher rates for those as well.

Secondly, it's then necessary to recalculate the minimal config before initializing rate control, so that when rate control is initialized, the higher rates are already available. This can be done easily by adding the necessary function call in rate init.

Change-Id Ib9bc02d34797078db55459d196993f39dcd43070
---
 net/mac80211/chan.c |    3 ---
 net/mac80211/rate.c |    2 ++
 2 files changed, 2 insertions(+), 3 deletions(-)
net/mac80211/chan.c +0 -3
@@ -231,9 +231,6 @@ ieee80211_get_max_required_bw(struct iee
 		    !(sta->sdata->bss && sta->sdata->bss == sdata->bss))
 			continue;
 
-		if (!sta->uploaded || !test_sta_flag(sta, WLAN_STA_ASSOC))
-			continue;
-
 		max_bw = max(max_bw, ieee80211_get_sta_bw(&sta->sta));
 	}
 	rcu_read_unlock();
net/mac80211/rate.c +2 -0
@@ -40,6 +40,8 @@ void rate_control_rate_init(struct sta_i
 
 	ieee80211_sta_set_rx_nss(sta);
 
+	ieee80211_recalc_min_chandef(sta->sdata);
+
 	if (!ref)
 		return;
 
author maintainer
#55 lore raw

PATCH 47/109 be2net: fix unicast list filling

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <[email protected]>

[ Upstream commit 6052cd1af86f9833b6b0b60d5d4787c4a06d65ea ]

The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead.

Cc Sathya Perla <[email protected]>
Cc Ajit Khaparde <[email protected]>
Cc Sriharsha Basavapatna <[email protected]>
Cc Somnath Kotur <[email protected]>
Fixes b717241 be2net: replace polling with sleeping in the FW completion path
---
 drivers/net/ethernet/emulex/benet/be_main.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +1 -2
@@ -1719,9 +1719,8 @@ static void be_set_uc_list(struct be_ada
 	}
 
 	if (adapter->update_uc_list) {
-		i = 1; /* First slot is claimed by the Primary MAC */
-
 		/* cache the uc-list in adapter array */
+		i = 0;
 		netdev_for_each_uc_addr(ha, netdev) {
 			ether_addr_copy(adapter->uc_list[i].mac, ha->addr);
 			i++;
author maintainer
#56 lore raw

PATCH 48/109 net/appletalk: Fix kernel memory disclosure

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Tsyrklevich <[email protected]>

[ Upstream commit ce7e40c432ba84da104438f6799d460a4cad41bc ]

ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory.

---
 drivers/net/appletalk/ipddp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/appletalk/ipddp.c +1 -1
@@ -191,7 +191,7 @@ static netdev_tx_t ipddp_xmit(struct sk_
  */
 static int ipddp_create(struct ipddp_route *new_rt)
 {
-        struct ipddp_route *rt = kmalloc(sizeof(*rt), GFP_KERNEL);
+        struct ipddp_route *rt = kzalloc(sizeof(*rt), GFP_KERNEL);
 
         if (rt == NULL)
                 return -ENOMEM;
author maintainer
#48 lore raw

PATCH 40/109 libcxgb: fix error check for ip6_route_output()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Varun Prakash <[email protected]>

[ Upstream commit a9a8cdb368d99bb655b5cdabea560446db0527cc ]

ip6_route_output() never returns NULL so
check dst->error instead of !dst.

---
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c +5 -7
@@ -133,17 +133,15 @@ cxgb_find_route6(struct cxgb4_lld_info *
 		if (ipv6_addr_type(&fl6.daddr) & IPV6_ADDR_LINKLOCAL)
 			fl6.flowi6_oif = sin6_scope_id;
 		dst = ip6_route_output(&init_net, NULL, &fl6);
-		if (!dst)
-			goto out;
-		if (!cxgb_our_interface(lldi, get_real_dev,
-					ip6_dst_idev(dst)->dev) &&
-		    !(ip6_dst_idev(dst)->dev->flags & IFF_LOOPBACK)) {
+		if (dst->error ||
+		    (!cxgb_our_interface(lldi, get_real_dev,
+					 ip6_dst_idev(dst)->dev) &&
+		     !(ip6_dst_idev(dst)->dev->flags & IFF_LOOPBACK))) {
 			dst_release(dst);
-			dst = NULL;
+			return NULL;
 		}
 	}
 
-out:
 	return dst;
 }
 EXPORT_SYMBOL(cxgb_find_route6);
author maintainer
#72 lore raw

PATCH 65/109 net: sctp: fix array overrun read on sctp_timer_tbl

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Colin Ian King <[email protected]>

[ Upstream commit 0e73fc9a56f22f2eec4d2b2910c649f7af67b74d ]

The comparison on the timeout can lead to an array overrun read on sctp_timer_tbl because of an off-by-one error. Fix this by using < instead of <= and also compare to the array size rather than SCTP_EVENT_TIMEOUT_MAX.

Fixes CoverityScan CID#1397639 ("Out-of-bounds read")

---
 net/sctp/debug.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sctp/debug.c +1 -1
@@ -166,7 +166,7 @@ static const char *const sctp_timer_tbl[
 /* Lookup timer debug name. */
 const char *sctp_tname(const sctp_subtype_t id)
 {
-	if (id.timeout <= SCTP_EVENT_TIMEOUT_MAX)
+	if (id.timeout < ARRAY_SIZE(sctp_timer_tbl))
 		return sctp_timer_tbl[id.timeout];
 	return "unknown_timer";
 }
author maintainer
#73 lore raw

PATCH 66/109 x86/fpu: Set the xcomp_bv when we fake up a XSAVES area

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kevin Hao <[email protected]>

[ Upstream commit 4c833368f0bf748d4147bf301b1f95bc8eccb3c0 ]

I got the following calltrace on a Apollo Lake SoC with 32-bit kernel:

  WARNING: CPU: 2 PID: 261 at arch/x86/include/asm/fpu/internal.h:363 fpu__restore+0x1f5/0x260
  [...]
  Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLIRVPA.X64.0138.B35.1608091058 08/09/2016
  Call Trace:
   dump_stack()
   __warn()
   ? fpu__restore()
   warn_slowpath_null()
   fpu__restore()
   __fpu__restore_sig()
   fpu__restore_sig()
   restore_sigcontext.isra.9()
   sys_sigreturn()
   do_int80_syscall_32()
   entry_INT80_32()

The reason is that a #GP occurs when executing XRSTORS. The root cause is that we forget to set the xcomp_bv when we fake up the XSAVES area in the copyin_to_xsaves() function.

Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc Fenghua Yu <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Oleg Nesterov <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Quentin Casasnovas <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Yu-cheng Yu <[email protected]>
---
 arch/x86/kernel/fpu/xstate.c |    1 +
 1 file changed, 1 insertion(+)
arch/x86/kernel/fpu/xstate.c +1 -0
@@ -1077,6 +1077,7 @@ int copyin_to_xsaves(const void *kbuf, c
 	 * Add back in the features that came in from userspace:
 	 */
 	xsave->header.xfeatures |= xfeatures;
+	xsave->header.xcomp_bv = XCOMP_BV_COMPACTED_FORMAT | xsave->header.xfeatures;
 
 	return 0;
 }
author maintainer
#65 lore raw

PATCH 57/109 KVM: arm/arm64: Fix occasional warning from the timer work function

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoffer Dall <[email protected]>

[ Upstream commit 63e41226afc3f7a044b70325566fa86ac3142538 ]

When a VCPU blocks (WFI) and has programmed the vtimer, we program a soft timer to expire in the future to wake up the vcpu thread when appropriate. Because such as wake up involves a vcpu kick, and the timer expire function can get called from interrupt context, and the kick may sleep, we have to schedule the kick in the work function.

The work function currently has a warning that gets raised if it turns out that the timer shouldn't fire when it's run, which was added because the idea was that in that case the work should never have been cancelled.

However, it turns out that this whole thing is racy and we can get spurious warnings. The problem is that we clear the armed flag in the work function, which may run in parallel with the kvm_timer_unschedule->timer_disarm() call. This results in a possible situation where the timer_disarm() call does not call cancel_work_sync(), which effectively synchronizes the completion of the work function with running the VCPU. As a result, the VCPU thread proceeds before the work function completees, causing changes to the timer state such that kvm_timer_should_fire(vcpu) returns false in the work function.

All we do in the work function is to kick the VCPU, and an occasional rare extra kick never harmed anyone. Since the race above is extremely rare, we don't bother checking if the race happens but simply remove the check and the clearing of the armed flag from the work function.

---
 virt/kvm/arm/arch_timer.c |    3 ---
 1 file changed, 3 deletions(-)
virt/kvm/arm/arch_timer.c +0 -3
@@ -89,9 +89,6 @@ static void kvm_timer_inject_irq_work(st
 	struct kvm_vcpu *vcpu;
 
 	vcpu = container_of(work, struct kvm_vcpu, arch.timer_cpu.expired);
-	vcpu->arch.timer_cpu.armed = false;
-
-	WARN_ON(!kvm_timer_should_fire(vcpu));
 
 	/*
 	 * If the vcpu is blocked we want to wake it up so that it will see
author maintainer
#66 lore raw

PATCH 58/109 mac80211: prevent skb/txq mismatch

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Kazior <[email protected]>

[ Upstream commit dbef53621116474bb883f76f0ba6b7640bc42332 ]

Station structure is considered as not uploaded (to driver) until drv_sta_state() finishes. This call is however done after the structure is attached to mac80211 internal lists and hashes. This means mac80211 can lookup (and use) station structure before it is uploaded to a driver.

If this happens (structure exists, but sta->uploaded is false) fast_tx path can still be taken. Deep in the fastpath call the sta->uploaded is checked against to derive "pubsta" argument for ieee80211_get_txq(). If sta->uploaded is false (and sta is actually non-NULL) ieee80211_get_txq() effectively downgraded to vif->txq.

At first glance this may look innocent but coerces mac80211 into a state that is almost guaranteed (codel may drop offending skb) to crash because a station-oriented skb gets queued up on vif-oriented txq. The ieee80211_tx_dequeue() ends up looking at info->control.flags and tries to use txq->sta which in the fail case is NULL.

It's probably pointless to pretend one can downgrade skb from sta-txq to vif-txq.

Since downgrading unicast traffic to vif->txq must not be done there's no txq to put a frame on if sta->uploaded is false. Therefore the code is made to fall back to regular tx() op path if the described condition is hit.

Only drivers using wake_tx_queue were affected.

Example crash dump before fix:

 Unable to handle kernel paging request at virtual address ffffe26c
 PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211]
 [<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from
 [<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core])
 [<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from
 [<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core])
 [<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core])
 [<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci])
 [<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from
 [<c0572e90>] (net_rx_action+0xac/0x160)
---
 net/mac80211/tx.c |   17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
net/mac80211/tx.c +7 -10
@@ -1244,7 +1244,7 @@ ieee80211_tx_prepare(struct ieee80211_su
 
 static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
 					  struct ieee80211_vif *vif,
-					  struct ieee80211_sta *pubsta,
+					  struct sta_info *sta,
 					  struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -1258,10 +1258,13 @@ static struct txq_info *ieee80211_get_tx
 	if (!ieee80211_is_data(hdr->frame_control))
 		return NULL;
 
-	if (pubsta) {
+	if (sta) {
 		u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 
-		txq = pubsta->txq[tid];
+		if (!sta->uploaded)
+			return NULL;
+
+		txq = sta->sta.txq[tid];
 	} else if (vif) {
 		txq = vif->txq;
 	}
@@ -1499,23 +1502,17 @@ static bool ieee80211_queue_skb(struct i
 	struct fq *fq = &local->fq;
 	struct ieee80211_vif *vif;
 	struct txq_info *txqi;
-	struct ieee80211_sta *pubsta;
 
 	if (!local->ops->wake_tx_queue ||
 	    sdata->vif.type == NL80211_IFTYPE_MONITOR)
 		return false;
 
-	if (sta && sta->uploaded)
-		pubsta = &sta->sta;
-	else
-		pubsta = NULL;
-
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		sdata = container_of(sdata->bss,
 				     struct ieee80211_sub_if_data, u.ap);
 
 	vif = &sdata->vif;
-	txqi = ieee80211_get_txq(local, vif, pubsta, skb);
+	txqi = ieee80211_get_txq(local, vif, sta, skb);
 
 	if (!txqi)
 		return false;
author maintainer
#67 lore raw

PATCH 59/109 NFSv4: Fix client recovery when server reboots multiple times

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

[ Upstream commit c6180a6237174f481dc856ed6e890d8196b6f0fb ]

If the server reboots multiple times, the client should rely on the server to tell it that it cannot reclaim state as per section 9.6.3.4 in RFC7530 and section 8.4.2.1 in RFC5661.
Currently, the client is being to conservative, and is assuming that if the server reboots while state recovery is in progress, then it must ignore state that was not recovered before the reboot.

---
 fs/nfs/nfs4state.c |    1 -
 1 file changed, 1 deletion(-)
fs/nfs/nfs4state.c +0 -1
@@ -1718,7 +1718,6 @@ static int nfs4_recovery_handle_error(st
 			break;
 		case -NFS4ERR_STALE_CLIENTID:
 			set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
-			nfs4_state_clear_reclaim_reboot(clp);
 			nfs4_state_start_reclaim_reboot(clp);
 			break;
 		case -NFS4ERR_EXPIRED:
author maintainer
#69 lore raw

PATCH 61/109 powerpc/mm: Fix memory hotplug BUG() on radix

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Reza Arbab <[email protected]>

[ Upstream commit 32b53c012e0bfe20b2745962a89db0dc72ef3270 ]

Memory hotplug is leading to hash page table calls, even on radix:

  arch_add_memory
    create_section_mapping
      htab_bolt_mapping
        BUG_ON(!ppc_md.hpte_insert);

To fix, refactor {create,remove}_section_mapping() into hash__ and radix__ variants. Leave the radix versions stubbed for now.

---
 arch/powerpc/include/asm/book3s/64/hash.h |    4 ++++
 arch/powerpc/mm/hash_utils_64.c           |    4 ++--
 arch/powerpc/mm/pgtable-book3s64.c        |   18 ++++++++++++++++++
 3 files changed, 24 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/book3s/64/hash.h +4 -0
@@ -201,6 +201,10 @@ extern int __meminit hash__vmemmap_creat
 					      unsigned long phys);
 extern void hash__vmemmap_remove_mapping(unsigned long start,
 				     unsigned long page_size);
+
+int hash__create_section_mapping(unsigned long start, unsigned long end);
+int hash__remove_section_mapping(unsigned long start, unsigned long end);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */
arch/powerpc/mm/hash_utils_64.c +2 -2
@@ -747,7 +747,7 @@ static unsigned long __init htab_get_tab
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-int create_section_mapping(unsigned long start, unsigned long end)
+int hash__create_section_mapping(unsigned long start, unsigned long end)
 {
 	int rc = htab_bolt_mapping(start, end, __pa(start),
 				   pgprot_val(PAGE_KERNEL), mmu_linear_psize,
@@ -761,7 +761,7 @@ int create_section_mapping(unsigned long
 	return rc;
 }
 
-int remove_section_mapping(unsigned long start, unsigned long end)
+int hash__remove_section_mapping(unsigned long start, unsigned long end)
 {
 	int rc = htab_remove_mapping(start, end, mmu_linear_psize,
 				     mmu_kernel_ssize);
arch/powerpc/mm/pgtable-book3s64.c +18 -0
@@ -125,3 +125,21 @@ void mmu_cleanup_all(void)
 	else if (mmu_hash_ops.hpte_clear_all)
 		mmu_hash_ops.hpte_clear_all();
 }
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int create_section_mapping(unsigned long start, unsigned long end)
+{
+	if (radix_enabled())
+		return -ENODEV;
+
+	return hash__create_section_mapping(start, end);
+}
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+	if (radix_enabled())
+		return -ENODEV;
+
+	return hash__remove_section_mapping(start, end);
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
author maintainer
#70 lore raw

PATCH 62/109 qla2xxx: Fix wrong IOCB type assumption

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Quinn Tran <[email protected]>

[ Upstream commit bb1181c9a8b46b6f10e749d9ed94480336445d7f ]

qlt_reset is called with Immedidate Notify IOCB only. Current code wrongly cast it as ATIO IOCB.

---
 drivers/scsi/qla2xxx/qla_target.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/scsi/qla2xxx/qla_target.c +1 -7
@@ -668,11 +668,9 @@ static int qlt_reset(struct scsi_qla_hos
 {
 	struct qla_hw_data *ha = vha->hw;
 	struct qla_tgt_sess *sess = NULL;
-	uint32_t unpacked_lun, lun = 0;
 	uint16_t loop_id;
 	int res = 0;
 	struct imm_ntfy_from_isp *n = (struct imm_ntfy_from_isp *)iocb;
-	struct atio_from_isp *a = (struct atio_from_isp *)iocb;
 	unsigned long flags;
 
 	loop_id = le16_to_cpu(n->u.isp24.nport_handle);
@@ -725,11 +723,7 @@ static int qlt_reset(struct scsi_qla_hos
 	    "loop_id %d)\n", vha->host_no, sess, sess->port_name,
 	    mcmd, loop_id);
 
-	lun = a->u.isp24.fcp_cmnd.lun;
-	unpacked_lun = scsilun_to_int((struct scsi_lun *)&lun);
-
-	return qlt_issue_task_mgmt(sess, unpacked_lun, mcmd,
-	    iocb, QLA24XX_MGMT_SEND_NACK);
+	return qlt_issue_task_mgmt(sess, 0, mcmd, iocb, QLA24XX_MGMT_SEND_NACK);
 }
 
 /* ha->tgt.sess_lock supposed to be held on entry */
author maintainer
#62 lore raw

PATCH 54/109 nfs: Dont take a reference on fl->fl_file for LOCK operation

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Coddington <[email protected]>

[ Upstream commit 4b09ec4b14a168bf2c687e1f598140c3c11e9222 ]

I have reports of a crash that look like __fput() was called twice for a NFSv4.0 file. It seems possible that the state manager could try to reclaim a lock and take a reference on the fl->fl_file at the same time the file is being released if, during the close(), a signal interrupts the wait for outstanding IO while removing locks which then skips the removal of that lock.

Since 83bfff23e9ed ("nfs4: have do_vfs_lock take an inode pointer") has removed the need to traverse fl->fl_file->f_inode in nfs4_lock_done(), taking that reference is no longer necessary.

---
 fs/nfs/nfs4proc.c |    3 ---
 1 file changed, 3 deletions(-)
fs/nfs/nfs4proc.c +0 -3
@@ -38,7 +38,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
-#include <linux/file.h>
 #include <linux/string.h>
 #include <linux/ratelimit.h>
 #include <linux/printk.h>
@@ -6006,7 +6005,6 @@ static struct nfs4_lockdata *nfs4_alloc_
 	p->server = server;
 	atomic_inc(&lsp->ls_count);
 	p->ctx = get_nfs_open_context(ctx);
-	get_file(fl->fl_file);
 	memcpy(&p->fl, fl, sizeof(p->fl));
 	return p;
 out_free_seqid:
@@ -6119,7 +6117,6 @@ static void nfs4_lock_release(void *call
 		nfs_free_seqid(data->arg.lock_seqid);
 	nfs4_put_lock_state(data->lsp);
 	put_nfs_open_context(data->ctx);
-	fput(data->fl.fl_file);
 	kfree(data);
 	dprintk("%s: done!\n", __func__);
 }
author maintainer
#74 lore raw

PATCH 68/109 mac80211: dont try to sleep in rate_control_rate_init()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 115865fa0826ed18ca04717cf72d0fe874c0fe7f ]

In my previous patch, I missed that rate_control_rate_init() is called from some places that cannot sleep, so it cannot call ieee80211_recalc_min_chandef(). Remove that call for now to fix the context bug, we'll have to find a different way to fix the minimum channel width issue.

Fixes 96aa2e7cf126 ("mac80211: calculate min channel width correctly")
---
 net/mac80211/rate.c |    2 --
 1 file changed, 2 deletions(-)
net/mac80211/rate.c +0 -2
@@ -40,8 +40,6 @@ void rate_control_rate_init(struct sta_i
 
 	ieee80211_sta_set_rx_nss(sta);
 
-	ieee80211_recalc_min_chandef(sta->sdata);
-
 	if (!ref)
 		return;
 
author maintainer
#85 lore raw

PATCH 79/109 net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Nyekjaer <[email protected]>

[ Upstream commit cf626c3b252b2c9d131be0dd66096ec3bf729e54 ]

As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits.

Fixes 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
---
 drivers/net/phy/micrel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/micrel.c +1 -1
@@ -1020,7 +1020,7 @@ static struct phy_driver ksphy_driver[]
 	.phy_id		= PHY_ID_KSZ8795,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8795",
-	.features	= (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
+	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
author maintainer
#86 lore raw

PATCH 81/109 be2net: fix initial MAC setting

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <[email protected]>

[ Upstream commit 4993b39ab04b083ff6ee1147e7e7f120feb6bf7f ]

Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail.

The MAC should be initialized only when:
1) no MAC is programmed (always except BE3 VFs during first init)
2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted.

The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case.

Example of failure without the fix (immediately after fresh boot):

# ip link set eth0 up  <- eth0 is BE3 PF
be2net 0000:01:00.0 eth0: Link is Up
# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create 1 VF
...
be2net 0000:01:04.0: Emulex OneConnect(be3): VF  port 0
# ip link set eth8 up  <- eth8 is created privileged VF
be2net 0000:01:04.0: opcode 59-1 failed:status 1-76
RTNETLINK answers: Input/output error
# echo 0 > /sys/class/net/eth0/device/sriov_numvfs  <- Delete VF
iommu: Removing device 0000:01:04.0 from group 33
...
# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create it again
iommu: Removing device 0000:01:04.0 from group 33
...
# ip link set eth8 up
be2net 0000:01:04.0 eth8: Link is Up

Initialization is now OK.

v2 - Corrected the comment and condition check suggested by Suresh & Harsha

Fixes 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs")
Cc Sathya Perla <[email protected]>
Cc Ajit Khaparde <[email protected]>
Cc Sriharsha Basavapatna <[email protected]>
Cc Somnath Kotur <[email protected]>
---
 drivers/net/ethernet/emulex/benet/be_main.c |   33 +++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +28 -5
@@ -362,8 +362,10 @@ static int be_mac_addr_set(struct net_de
 		status = -EPERM;
 		goto err;
 	}
-done:
+
+	/* Remember currently programmed MAC */
 	ether_addr_copy(adapter->dev_mac, addr->sa_data);
+done:
 	ether_addr_copy(netdev->dev_addr, addr->sa_data);
 	dev_info(dev, "MAC address changed to %pM\n", addr->sa_data);
 	return 0;
@@ -3635,8 +3637,10 @@ static void be_disable_if_filters(struct
 {
 	/* Don't delete MAC on BE3 VFs without FILTMGMT privilege  */
 	if (!BEx_chip(adapter) || !be_virtfn(adapter) ||
-	    check_privilege(adapter, BE_PRIV_FILTMGMT))
+	    check_privilege(adapter, BE_PRIV_FILTMGMT)) {
 		be_dev_mac_del(adapter, adapter->pmac_id[0]);
+		eth_zero_addr(adapter->dev_mac);
+	}
 
 	be_clear_uc_list(adapter);
 	be_clear_mc_list(adapter);
@@ -3790,12 +3794,27 @@ static int be_enable_if_filters(struct b
 	if (status)
 		return status;
 
-	/* Don't add MAC on BE3 VFs without FILTMGMT privilege */
-	if (!BEx_chip(adapter) || !be_virtfn(adapter) ||
-	    check_privilege(adapter, BE_PRIV_FILTMGMT)) {
+	/* Normally this condition usually true as the ->dev_mac is zeroed.
+	 * But on BE3 VFs the initial MAC is pre-programmed by PF and
+	 * subsequent be_dev_mac_add() can fail (after fresh boot)
+	 */
+	if (!ether_addr_equal(adapter->dev_mac, adapter->netdev->dev_addr)) {
+		int old_pmac_id = -1;
+
+		/* Remember old programmed MAC if any - can happen on BE3 VF */
+		if (!is_zero_ether_addr(adapter->dev_mac))
+			old_pmac_id = adapter->pmac_id[0];
+
 		status = be_dev_mac_add(adapter, adapter->netdev->dev_addr);
 		if (status)
 			return status;
+
+		/* Delete the old programmed MAC as we successfully programmed
+		 * a new MAC
+		 */
+		if (old_pmac_id >= 0 && old_pmac_id != adapter->pmac_id[0])
+			be_dev_mac_del(adapter, old_pmac_id);
+
 		ether_addr_copy(adapter->dev_mac, adapter->netdev->dev_addr);
 	}
 
@@ -4569,6 +4588,10 @@ static int be_mac_setup(struct be_adapte
 
 		memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
 		memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
+
+		/* Initial MAC for BE3 VFs is already programmed by PF */
+		if (BEx_chip(adapter) && be_virtfn(adapter))
+			memcpy(adapter->dev_mac, mac, ETH_ALEN);
 	}
 
 	return 0;
author maintainer
#79 lore raw

PATCH 73/109 dmaengine: pl330: fix double lock

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Iago Abal <[email protected]>

[ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ]

The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the following double-lock bug:

Double lock:
1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236;
2. call to function `pl330_release_channel' immediately after;
3. call to function `dma_pl330_rqcb' in line 1753;
4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505.

I have fixed it as suggested by Marek Szyprowski.

First, I have replaced pch->lock' with pl330->lock' in functions pl330_alloc_chan_resources' and pl330_free_chan_resources'. This avoids the double-lock by acquiring a different lock than `dma_pl330_rqcb'.

NOTE that, as a result, pl330_free_chan_resources' executes list_splice_tail_init' on pch->work_list' under lock pl330->lock', whereas in the rest of the code pch->work_list' is protected by pch->lock'. I don't know if this may cause race conditions. Similarly pch->cyclic' is written by pl330_alloc_chan_resources' under pl330->lock' but read by pl330_tx_submit' under `pch->lock'.

Second, I have removed locking from pl330_request_channel' and pl330_release_channel' functions. Function pl330_request_channel' is only called from pl330_alloc_chan_resources', so the lock is already held. Function pl330_release_channel' is called from pl330_free_chan_resources', which already holds the lock, and from pl330_del'. Function pl330_del' is called in an error path of pl330_probe' and at the end of pl330_remove', but I assume that there cannot be concurrent accesses to the protected data at those points.

---
 drivers/dma/pl330.c |   19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/dma/pl330.c +6 -13
@@ -1694,7 +1694,6 @@ static bool _chan_ns(const struct pl330_
 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
 {
 	struct pl330_thread *thrd = NULL;
-	unsigned long flags;
 	int chans, i;
 
 	if (pl330->state == DYING)
@@ -1702,8 +1701,6 @@ static struct pl330_thread *pl330_reques
 
 	chans = pl330->pcfg.num_chan;
 
-	spin_lock_irqsave(&pl330->lock, flags);
-
 	for (i = 0; i < chans; i++) {
 		thrd = &pl330->channels[i];
 		if ((thrd->free) && (!_manager_ns(thrd) ||
@@ -1721,8 +1718,6 @@ static struct pl330_thread *pl330_reques
 		thrd = NULL;
 	}
 
-	spin_unlock_irqrestore(&pl330->lock, flags);
-
 	return thrd;
 }
 
@@ -1740,7 +1735,6 @@ static inline void _free_event(struct pl
 static void pl330_release_channel(struct pl330_thread *thrd)
 {
 	struct pl330_dmac *pl330;
-	unsigned long flags;
 
 	if (!thrd || thrd->free)
 		return;
@@ -1752,10 +1746,8 @@ static void pl330_release_channel(struct
 
 	pl330 = thrd->dmac;
 
-	spin_lock_irqsave(&pl330->lock, flags);
 	_free_event(thrd, thrd->ev);
 	thrd->free = true;
-	spin_unlock_irqrestore(&pl330->lock, flags);
 }
 
 /* Initialize the structure for PL330 configuration, that can be used
@@ -2120,20 +2112,20 @@ static int pl330_alloc_chan_resources(st
 	struct pl330_dmac *pl330 = pch->dmac;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pch->lock, flags);
+	spin_lock_irqsave(&pl330->lock, flags);
 
 	dma_cookie_init(chan);
 	pch->cyclic = false;
 
 	pch->thread = pl330_request_channel(pl330);
 	if (!pch->thread) {
-		spin_unlock_irqrestore(&pch->lock, flags);
+		spin_unlock_irqrestore(&pl330->lock, flags);
 		return -ENOMEM;
 	}
 
 	tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
 
-	spin_unlock_irqrestore(&pch->lock, flags);
+	spin_unlock_irqrestore(&pl330->lock, flags);
 
 	return 1;
 }
@@ -2236,12 +2228,13 @@ static int pl330_pause(struct dma_chan *
 static void pl330_free_chan_resources(struct dma_chan *chan)
 {
 	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330 = pch->dmac;
 	unsigned long flags;
 
 	tasklet_kill(&pch->task);
 
 	pm_runtime_get_sync(pch->dmac->ddma.dev);
-	spin_lock_irqsave(&pch->lock, flags);
+	spin_lock_irqsave(&pl330->lock, flags);
 
 	pl330_release_channel(pch->thread);
 	pch->thread = NULL;
@@ -2249,7 +2242,7 @@ static void pl330_free_chan_resources(st
 	if (pch->cyclic)
 		list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
 
-	spin_unlock_irqrestore(&pch->lock, flags);
+	spin_unlock_irqrestore(&pl330->lock, flags);
 	pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
 	pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
 }
author maintainer
#90 lore raw

PATCH 85/109 cec: initiator should be the same as the destination for, poll

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <[email protected]>

[ Upstream commit 42980da2eb7eb9695d8efc0c0ef145cbbb993b2c ]

Poll messages that are used to allocate a logical address should use the same initiator as the destination. Instead, it expected that the initiator was 0xf which is not according to the standard.

This also had consequences for the message checks in cec_transmit_msg_fh that incorrectly rejected poll messages with the same initiator and destination.

---
 drivers/staging/media/cec/cec-adap.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/staging/media/cec/cec-adap.c +3 -4
@@ -608,8 +608,7 @@ int cec_transmit_msg_fh(struct cec_adapt
 	}
 	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
 	if (msg->len == 1) {
-		if (cec_msg_initiator(msg) != 0xf ||
-		    cec_msg_destination(msg) == 0xf) {
+		if (cec_msg_destination(msg) == 0xf) {
 			dprintk(1, "cec_transmit_msg: invalid poll message\n");
 			return -EINVAL;
 		}
@@ -634,7 +633,7 @@ int cec_transmit_msg_fh(struct cec_adapt
 		dprintk(1, "cec_transmit_msg: destination is the adapter itself\n");
 		return -EINVAL;
 	}
-	if (cec_msg_initiator(msg) != 0xf &&
+	if (msg->len > 1 && adap->is_configured &&
 	    !cec_has_log_addr(adap, cec_msg_initiator(msg))) {
 		dprintk(1, "cec_transmit_msg: initiator has unknown logical address %d\n",
 			cec_msg_initiator(msg));
@@ -883,7 +882,7 @@ static int cec_config_log_addr(struct ce
 
 	/* Send poll message */
 	msg.len = 1;
-	msg.msg[0] = 0xf0 | log_addr;
+	msg.msg[0] = (log_addr << 4) | log_addr;
 	err = cec_transmit_msg_fh(adap, &msg, NULL, true);
 
 	/*
author maintainer
#91 lore raw

PATCH 86/109 xen-netback: vif counters from int/long to u64

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mart van Santen <[email protected]>

[ Upstream commit ebf692f85ff78092cd238166d8d7ec51419f9c02 ]

This patch fixes an issue where the type of counters in the queue(s) and interface are not in sync (queue counters are int, interface counters are long), causing incorrect reporting of tx/rx values of the vif interface and unclear counter overflows.
This patch sets both counters to the u64 type.

---
 drivers/net/xen-netback/common.h    |    8 ++++----
 drivers/net/xen-netback/interface.c |    8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/net/xen-netback/common.h +4 -4
@@ -113,10 +113,10 @@ struct xenvif_stats {
 	 * A subset of struct net_device_stats that contains only the
 	 * fields that are updated in netback.c for each queue.
 	 */
-	unsigned int rx_bytes;
-	unsigned int rx_packets;
-	unsigned int tx_bytes;
-	unsigned int tx_packets;
+	u64 rx_bytes;
+	u64 rx_packets;
+	u64 tx_bytes;
+	u64 tx_packets;
 
 	/* Additional stats used by xenvif */
 	unsigned long rx_gso_checksum_fixup;
drivers/net/xen-netback/interface.c +4 -4
@@ -225,10 +225,10 @@ static struct net_device_stats *xenvif_g
 {
 	struct xenvif *vif = netdev_priv(dev);
 	struct xenvif_queue *queue = NULL;
-	unsigned long rx_bytes = 0;
-	unsigned long rx_packets = 0;
-	unsigned long tx_bytes = 0;
-	unsigned long tx_packets = 0;
+	u64 rx_bytes = 0;
+	u64 rx_packets = 0;
+	u64 tx_bytes = 0;
+	u64 tx_packets = 0;
 	unsigned int index;
 
 	spin_lock(&vif->lock);
author maintainer
#92 lore raw

PATCH 87/109 net: fec: fix multicast filtering hardware setup

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rui Sousa <[email protected]>

[ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ]

Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once to hardware

---
 drivers/net/ethernet/freescale/fec_main.c |   23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)
drivers/net/ethernet/freescale/fec_main.c +9 -14
@@ -2923,6 +2923,7 @@ static void set_multicast_list(struct ne
 	struct netdev_hw_addr *ha;
 	unsigned int i, bit, data, crc, tmp;
 	unsigned char hash;
+	unsigned int hash_high = 0, hash_low = 0;
 
 	if (ndev->flags & IFF_PROMISC) {
 		tmp = readl(fep->hwp + FEC_R_CNTRL);
@@ -2945,11 +2946,7 @@ static void set_multicast_list(struct ne
 		return;
 	}
 
-	/* Clear filter and add the addresses in hash register
-	 */
-	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-
+	/* Add the addresses in hash register */
 	netdev_for_each_mc_addr(ha, ndev) {
 		/* calculate crc32 value of mac address */
 		crc = 0xffffffff;
@@ -2967,16 +2964,14 @@ static void set_multicast_list(struct ne
 		 */
 		hash = (crc >> (32 - FEC_HASH_BITS)) & 0x3f;
 
-		if (hash > 31) {
-			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-			tmp |= 1 << (hash - 32);
-			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
-		} else {
-			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-			tmp |= 1 << hash;
-			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
-		}
+		if (hash > 31)
+			hash_high |= 1 << (hash - 32);
+		else
+			hash_low |= 1 << hash;
 	}
+
+	writel(hash_high, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+	writel(hash_low, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
 }
 
 /* Set a MAC change in hardware. */
author maintainer
#111 lore raw

PATCH 106/109 USB: Increase usbfs transfer limit

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mateusz Berezecki <[email protected]>

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a wider data type and allow for higher bandwidth transfers from a large number of USB devices connected to a single host.

---
 drivers/usb/core/devio.c |   43 ++++++++++++++++---------------------------
 1 file changed, 16 insertions(+), 27 deletions(-)
drivers/usb/core/devio.c +16 -27
@@ -134,42 +134,35 @@ enum snoop_when {
 #define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
 
 /* Limit on the total amount of memory we can allocate for transfers */
-static unsigned usbfs_memory_mb = 16;
+static u32 usbfs_memory_mb = 16;
 module_param(usbfs_memory_mb, uint, 0644);
 MODULE_PARM_DESC(usbfs_memory_mb,
 		"maximum MB allowed for usbfs buffers (0 = no limit)");
 
-/* Hard limit, necessary to avoid arithmetic overflow */
-#define USBFS_XFER_MAX		(UINT_MAX / 2 - 1000000)
-
-static atomic_t usbfs_memory_usage;	/* Total memory currently allocated */
+static atomic64_t usbfs_memory_usage;	/* Total memory currently allocated */
 
 /* Check whether it's okay to allocate more memory for a transfer */
-static int usbfs_increase_memory_usage(unsigned amount)
+static int usbfs_increase_memory_usage(u64 amount)
 {
-	unsigned lim;
+	u64 lim;
 
-	/*
-	 * Convert usbfs_memory_mb to bytes, avoiding overflows.
-	 * 0 means use the hard limit (effectively unlimited).
-	 */
 	lim = ACCESS_ONCE(usbfs_memory_mb);
-	if (lim == 0 || lim > (USBFS_XFER_MAX >> 20))
-		lim = USBFS_XFER_MAX;
-	else
-		lim <<= 20;
+	lim <<= 20;
 
-	atomic_add(amount, &usbfs_memory_usage);
-	if (atomic_read(&usbfs_memory_usage) <= lim)
-		return 0;
-	atomic_sub(amount, &usbfs_memory_usage);
-	return -ENOMEM;
+	atomic64_add(amount, &usbfs_memory_usage);
+
+	if (lim > 0 && atomic64_read(&usbfs_memory_usage) > lim) {
+		atomic64_sub(amount, &usbfs_memory_usage);
+		return -ENOMEM;
+	}
+
+	return 0;
 }
 
 /* Memory for a transfer is being deallocated */
-static void usbfs_decrease_memory_usage(unsigned amount)
+static void usbfs_decrease_memory_usage(u64 amount)
 {
-	atomic_sub(amount, &usbfs_memory_usage);
+	atomic64_sub(amount, &usbfs_memory_usage);
 }
 
 static int connected(struct usb_dev_state *ps)
@@ -1191,7 +1184,7 @@ static int proc_bulk(struct usb_dev_stat
 	if (!usb_maxpacket(dev, pipe, !(bulk.ep & USB_DIR_IN)))
 		return -EINVAL;
 	len1 = bulk.len;
-	if (len1 >= USBFS_XFER_MAX)
+	if (len1 >= (INT_MAX - sizeof(struct urb)))
 		return -EINVAL;
 	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
 	if (ret)
@@ -1584,10 +1577,6 @@ static int proc_do_submiturb(struct usb_
 		return -EINVAL;
 	}
 
-	if (uurb->buffer_length >= USBFS_XFER_MAX) {
-		ret = -EINVAL;
-		goto error;
-	}
 	if (uurb->buffer_length > 0 &&
 			!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
 				uurb->buffer, uurb->buffer_length)) {
author maintainer
#103 lore raw

PATCH 98/109 dma-fence: Wrap querying the fence->status

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit d6c99f4bf093a58d3ab47caaec74b81f18bc4e3f upstream.

The fence->status is an optional field that is only valid once the fence has been signaled. (Driver may fill the fence->status with an error code prior to calling dma_fence_signal().) Given the restriction upon its validity, wrap querying of the fence->status into a helper dma_fence_get_status().

---
 drivers/dma-buf/fence.c      |   25 +++++++++++++++++++++++++
 drivers/dma-buf/sync_debug.c |   20 ++++++++++----------
 drivers/dma-buf/sync_file.c  |    6 ++----
 include/linux/fence.h        |   24 ++++++++++++++++++++++++
 4 files changed, 61 insertions(+), 14 deletions(-)
drivers/dma-buf/fence.c +25 -0
@@ -281,6 +281,31 @@ int fence_add_callback(struct fence *fen
 EXPORT_SYMBOL(fence_add_callback);
 
 /**
+ * fence_get_status - returns the status upon completion
+ * @fence: [in]	the fence to query
+ *
+ * This wraps fence_get_status_locked() to return the error status
+ * condition on a signaled fence. See fence_get_status_locked() for more
+ * details.
+ *
+ * Returns 0 if the fence has not yet been signaled, 1 if the fence has
+ * been signaled without an error condition, or a negative error code
+ * if the fence has been completed in err.
+ */
+int fence_get_status(struct fence *fence)
+{
+	unsigned long flags;
+	int status;
+
+	spin_lock_irqsave(fence->lock, flags);
+	status = fence_get_status_locked(fence);
+	spin_unlock_irqrestore(fence->lock, flags);
+
+	return status;
+}
+EXPORT_SYMBOL(fence_get_status);
+
+/**
  * fence_remove_callback - remove a callback from the signaling list
  * @fence:	[in]	the fence to wait on
  * @cb:		[in]	the callback to remove
drivers/dma-buf/sync_debug.c +10 -10
@@ -62,29 +62,29 @@ void sync_file_debug_remove(struct sync_
 
 static const char *sync_status_str(int status)
 {
-	if (status == 0)
-		return "signaled";
+	if (status < 0)
+		return "error";
 
 	if (status > 0)
-		return "active";
+		return "signaled";
 
-	return "error";
+	return "active";
 }
 
-static void sync_print_fence(struct seq_file *s, struct fence *fence, bool show)
+static void sync_print_fence(struct seq_file *s,
+			     struct fence *fence, bool show)
 {
-	int status = 1;
 	struct sync_timeline *parent = fence_parent(fence);
+	int status;
 
-	if (fence_is_signaled_locked(fence))
-		status = fence->status;
+	status = fence_get_status_locked(fence);
 
 	seq_printf(s, "  %s%sfence %s",
 		   show ? parent->name : "",
 		   show ? "_" : "",
 		   sync_status_str(status));
 
-	if (status <= 0) {
+	if (status) {
 		struct timespec64 ts64 =
 			ktime_to_timespec64(fence->timestamp);
 
@@ -133,7 +133,7 @@ static void sync_print_sync_file(struct
 	int i;
 
 	seq_printf(s, "[%p] %s: %s\n", sync_file, sync_file->name,
-		   sync_status_str(!fence_is_signaled(sync_file->fence)));
+		   sync_status_str(fence_get_status(sync_file->fence)));
 
 	if (fence_is_array(sync_file->fence)) {
 		struct fence_array *array = to_fence_array(sync_file->fence);
drivers/dma-buf/sync_file.c +2 -4
@@ -377,10 +377,8 @@ static void sync_fill_fence_info(struct
 		sizeof(info->obj_name));
 	strlcpy(info->driver_name, fence->ops->get_driver_name(fence),
 		sizeof(info->driver_name));
-	if (fence_is_signaled(fence))
-		info->status = fence->status >= 0 ? 1 : fence->status;
-	else
-		info->status = 0;
+
+	info->status = fence_get_status(fence);
 	info->timestamp_ns = ktime_to_ns(fence->timestamp);
 }
 
include/linux/fence.h +24 -0
@@ -334,6 +334,30 @@ static inline struct fence *fence_later(
 		return fence_is_signaled(f2) ? NULL : f2;
 }
 
+/**
+ * fence_get_status_locked - returns the status upon completion
+ * @fence: [in]	the fence to query
+ *
+ * Drivers can supply an optional error status condition before they signal
+ * the fence (to indicate whether the fence was completed due to an error
+ * rather than success). The value of the status condition is only valid
+ * if the fence has been signaled, fence_get_status_locked() first checks
+ * the signal state before reporting the error status.
+ *
+ * Returns 0 if the fence has not yet been signaled, 1 if the fence has
+ * been signaled without an error condition, or a negative error code
+ * if the fence has been completed in err.
+ */
+static inline int fence_get_status_locked(struct fence *fence)
+{
+	if (fence_is_signaled_locked(fence))
+		return fence->status < 0 ? fence->status : 1;
+	else
+		return 0;
+}
+
+int fence_get_status(struct fence *fence);
+
 signed long fence_wait_timeout(struct fence *, bool intr, signed long timeout);
 signed long fence_wait_any_timeout(struct fence **fences, uint32_t count,
 				   bool intr, signed long timeout);
author maintainer
#107 lore raw

PATCH 102/109 dma-buf: Update kerneldoc for sync_file_create

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <[email protected]>

commit 24a367348a017555f982a9ee137070a7a821fa97 upstream.

This was missed when adding a dma_fence_get call. While at it also remove the kerneldoc for the static inline helper - no point documenting internals down to every detail.

Fixes 30cd85dd6edc ("dma-buf/sync_file: hold reference to fence when creating sync_file")
Cc Gustavo Padovan <[email protected]>
Cc Sean Paul <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Sumit Semwal <[email protected]>
---
 drivers/dma-buf/sync_file.c |   14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/dma-buf/sync_file.c +4 -10
@@ -67,9 +67,10 @@ static void fence_check_cb_func(struct f
  * sync_file_create() - creates a sync file
  * @fence:	fence to add to the sync_fence
  *
- * Creates a sync_file containg @fence. Once this is called, the sync_file
- * takes ownership of @fence. The sync_file can be released with
- * fput(sync_file->file). Returns the sync_file or NULL in case of error.
+ * Creates a sync_file containg @fence. This function acquires and additional
+ * reference of @fence for the newly-created &sync_file, if it succeeds. The
+ * sync_file can be released with fput(sync_file->file). Returns the
+ * sync_file or NULL in case of error.
  */
 struct sync_file *sync_file_create(struct fence *fence)
 {
@@ -90,13 +91,6 @@ struct sync_file *sync_file_create(struc
 }
 EXPORT_SYMBOL(sync_file_create);
 
-/**
- * sync_file_fdget() - get a sync_file from an fd
- * @fd:		fd referencing a fence
- *
- * Ensures @fd references a valid sync_file, increments the refcount of the
- * backing file. Returns the sync_file or NULL in case of error.
- */
 static struct sync_file *sync_file_fdget(int fd)
 {
 	struct file *file = fget(fd);
Acked-by on v1 37/109
#35 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

In reply to Greg Kroah-Hartman

add Pierre-yves Mordret

Quoted 49 lines · Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 7e96304d99477de1f70db42035071e56439da817 ]

This patch sets the right number of arguments to be used for DMA clients which request channels from DT.

---
  drivers/dma/stm32-dma.c |    7 ++-----
  1 file changed, 2 insertions(+), 5 deletions(-)
drivers/dma/stm32-dma.c +2 -5
@@ -976,21 +976,18 @@ static struct dma_chan *stm32_dma_of_xla
  	struct stm32_dma_chan *chan;
  	struct dma_chan *c;
 
-	if (dma_spec->args_count < 3)
+	if (dma_spec->args_count < 4)
  		return NULL;
 
  	cfg.channel_id = dma_spec->args[0];
  	cfg.request_line = dma_spec->args[1];
  	cfg.stream_config = dma_spec->args[2];
-	cfg.threshold = 0;
+	cfg.threshold = dma_spec->args[3];
 
  	if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >=
  				STM32_DMA_MAX_REQUEST_ID))
  		return NULL;
 
-	if (dma_spec->args_count > 3)
-		cfg.threshold = dma_spec->args[3];
-
  	chan = &dmadev->chan[cfg.channel_id];
 
  	c = dma_get_slave_channel(&chan->vchan.chan);
Acked-by on v1 38/109
#42 lore raw

Re: [PATCH 4.9 038/109] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

In reply to Greg Kroah-Hartman

add Pierre-yves Mordret

Quoted 55 lines · Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 57b5a32135c813f2ab669039fb4ec16b30cb3305 ]

chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status, we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue.

---
  drivers/dma/stm32-dma.c |   10 +++-------
  1 file changed, 3 insertions(+), 7 deletions(-)
drivers/dma/stm32-dma.c +3 -7
@@ -884,7 +884,7 @@ static enum dma_status stm32_dma_tx_stat
  	struct virt_dma_desc *vdesc;
  	enum dma_status status;
  	unsigned long flags;
-	u32 residue;
+	u32 residue = 0;
 
  	status = dma_cookie_status(c, cookie, state);
  	if ((status == DMA_COMPLETE) || (!state))
@@ -892,16 +892,12 @@ static enum dma_status stm32_dma_tx_stat
 
  	spin_lock_irqsave(&chan->vchan.lock, flags);
  	vdesc = vchan_find_desc(&chan->vchan, cookie);
-	if (cookie == chan->desc->vdesc.tx.cookie) {
+	if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
  		residue = stm32_dma_desc_residue(chan, chan->desc,
  						 chan->next_sg);
-	} else if (vdesc) {
+	else if (vdesc)
  		residue = stm32_dma_desc_residue(chan,
  						 to_stm32_dma_desc(vdesc), 0);
-	} else {
-		residue = 0;
-	}
-
  	dma_set_residue(state, residue);
 
  	spin_unlock_irqrestore(&chan->vchan.lock, flags);
#36 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

In reply to Ludovic BARRE

Hi,

I may ack this patch but what about dt-bindings and DT ?

~PYM~

Quoted 54 lines · Ludovic BARRE

add Pierre-yves Mordret

Quoted 49 lines · Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 7e96304d99477de1f70db42035071e56439da817 ]

This patch sets the right number of arguments to be used for DMA clients which request channels from DT.

---
  drivers/dma/stm32-dma.c |    7 ++-----
  1 file changed, 2 insertions(+), 5 deletions(-)
drivers/dma/stm32-dma.c +2 -5
@@ -976,21 +976,18 @@ static struct dma_chan *stm32_dma_of_xla
  	struct stm32_dma_chan *chan;
  	struct dma_chan *c;
 
-	if (dma_spec->args_count < 3)
+	if (dma_spec->args_count < 4)
  		return NULL;
 
  	cfg.channel_id = dma_spec->args[0];
  	cfg.request_line = dma_spec->args[1];
  	cfg.stream_config = dma_spec->args[2];
-	cfg.threshold = 0;
+	cfg.threshold = dma_spec->args[3];
 
  	if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >=
  				STM32_DMA_MAX_REQUEST_ID))
  		return NULL;
 
-	if (dma_spec->args_count > 3)
-		cfg.threshold = dma_spec->args[3];
-
  	chan = &dmadev->chan[cfg.channel_id];
 
  	c = dma_get_slave_channel(&chan->vchan.chan);
#43 lore raw

Re: [PATCH 4.9 038/109] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

In reply to Ludovic BARRE

with Pierre Yves mail it's better ;-)

Quoted 57 lines · Ludovic BARRE

add Pierre-yves Mordret

Quoted 52 lines · Greg Kroah-Hartman

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 57b5a32135c813f2ab669039fb4ec16b30cb3305 ]

chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status, we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue.

---
  drivers/dma/stm32-dma.c |   10 +++-------

  1 file changed, 3 insertions(+), 7 deletions(-)
drivers/dma/stm32-dma.c +3 -7
@@ -884,7 +884,7 @@ static enum dma_status stm32_dma_tx_stat
       struct virt_dma_desc *vdesc;
       enum dma_status status;
       unsigned long flags;
-    u32 residue;
+    u32 residue = 0;
       status = dma_cookie_status(c, cookie, state);
       if ((status == DMA_COMPLETE) || (!state))
@@ -892,16 +892,12 @@ static enum dma_status stm32_dma_tx_stat
       spin_lock_irqsave(&chan->vchan.lock, flags);
       vdesc = vchan_find_desc(&chan->vchan, cookie);
-    if (cookie == chan->desc->vdesc.tx.cookie) {
+    if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
           residue = stm32_dma_desc_residue(chan, chan->desc,
                            chan->next_sg);
-    } else if (vdesc) {
+    else if (vdesc)
           residue = stm32_dma_desc_residue(chan,
                            to_stm32_dma_desc(vdesc), 0);
-    } else {
-        residue = 0;
-    }
-
       dma_set_residue(state, residue);
       spin_unlock_irqrestore(&chan->vchan.lock, flags);
 
 
#44 lore raw

Re: [PATCH 4.9 038/109] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

~PYM~

Quoted 62 lines · Ludovic BARRE

with Pierre Yves mail it's better ;-)

Quoted 59 lines · Ludovic BARRE

add Pierre-yves Mordret

Quoted 54 lines · Greg Kroah-Hartman

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 57b5a32135c813f2ab669039fb4ec16b30cb3305 ]

chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status,
we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue.

---
  drivers/dma/stm32-dma.c |   10 +++-------

  1 file changed, 3 insertions(+), 7 deletions(-)
drivers/dma/stm32-dma.c +3 -7
@@ -884,7 +884,7 @@ static enum dma_status stm32_dma_tx_stat
       struct virt_dma_desc *vdesc;
       enum dma_status status;
       unsigned long flags;
-    u32 residue;
+    u32 residue = 0;
       status = dma_cookie_status(c, cookie, state);
       if ((status == DMA_COMPLETE) || (!state))
@@ -892,16 +892,12 @@ static enum dma_status stm32_dma_tx_stat
       spin_lock_irqsave(&chan->vchan.lock, flags);
       vdesc = vchan_find_desc(&chan->vchan, cookie);
-    if (cookie == chan->desc->vdesc.tx.cookie) {
+    if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
           residue = stm32_dma_desc_residue(chan, chan->desc,
                            chan->next_sg);
-    } else if (vdesc) {
+    else if (vdesc)
           residue = stm32_dma_desc_residue(chan,
                            to_stm32_dma_desc(vdesc), 0);
-    } else {
-        residue = 0;
-    }
-
       dma_set_residue(state, residue);
       spin_unlock_irqrestore(&chan->vchan.lock, flags);
 
 
#45 lore raw

Re: [PATCH 4.9 038/109] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status

In reply to Ludovic BARRE

~PYM~

Quoted 62 lines · Ludovic BARRE

with Pierre Yves mail it's better ;-)

Quoted 59 lines · Ludovic BARRE

add Pierre-yves Mordret

Quoted 54 lines · Greg Kroah-Hartman

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: M'boumba Cedric Madianga <[email protected]>

[ Upstream commit 57b5a32135c813f2ab669039fb4ec16b30cb3305 ]

chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status,
we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue.

---
  drivers/dma/stm32-dma.c |   10 +++-------

  1 file changed, 3 insertions(+), 7 deletions(-)
drivers/dma/stm32-dma.c +3 -7
@@ -884,7 +884,7 @@ static enum dma_status stm32_dma_tx_stat
       struct virt_dma_desc *vdesc;
       enum dma_status status;
       unsigned long flags;
-    u32 residue;
+    u32 residue = 0;
       status = dma_cookie_status(c, cookie, state);
       if ((status == DMA_COMPLETE) || (!state))
@@ -892,16 +892,12 @@ static enum dma_status stm32_dma_tx_stat
       spin_lock_irqsave(&chan->vchan.lock, flags);
       vdesc = vchan_find_desc(&chan->vchan, cookie);
-    if (cookie == chan->desc->vdesc.tx.cookie) {
+    if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
           residue = stm32_dma_desc_residue(chan, chan->desc,
                            chan->next_sg);
-    } else if (vdesc) {
+    else if (vdesc)
           residue = stm32_dma_desc_residue(chan,
                            to_stm32_dma_desc(vdesc), 0);
-    } else {
-        residue = 0;
-    }
-
       dma_set_residue(state, residue);
       spin_unlock_irqrestore(&chan->vchan.lock, flags);
 
 
author maintainer
#37 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

In reply to Pierre Yves MORDRET
Quoted 3 lines · Pierre Yves MORDRET

Hi,

I may ack this patch but what about dt-bindings and DT ?

And what commit id would that be?

thanks,

greg k-h

#38 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

In reply to Greg Kroah-Hartman

I did check. DT Bindings are aligned with the patch. In fact the patch was an alignment with DT Bindings.

For DT :
47c8a5035b68 ARM: dts: stm32: Add DMA support for STM32F746 SoC 01d281b6e4a2 ARM: dts: stm32: Add DMA support for STM32H743 SoC

Nonetheless I can ack the patch

~PYM~

Quoted 11 lines · Greg Kroah-Hartman
Quoted 3 lines · Pierre Yves MORDRET

Hi,

I may ack this patch but what about dt-bindings and DT ?

And what commit id would that be?

thanks,

greg k-h

#39 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

Quoted 7 lines · Pierre Yves MORDRET

I did check. DT Bindings are aligned with the patch. In fact the patch was an alignment with DT Bindings.

For DT :
47c8a5035b68 ARM: dts: stm32: Add DMA support for STM32F746 SoC 01d281b6e4a2 ARM: dts: stm32: Add DMA support for STM32H743 SoC

Quoted 18 lines

Nonetheless I can ack the patch

~PYM~

Quoted 11 lines · Greg Kroah-Hartman
Quoted 3 lines · Pierre Yves MORDRET

Hi,

I may ack this patch but what about dt-bindings and DT ?

And what commit id would that be?

thanks,

greg k-h

Greg, I'll queue these up with my next pull request.

Signature · 2 lines
Thanks,
Sasha
author maintainer
#40 lore raw

Re: [PATCH 4.9 037/109] dmaengine: stm32-dma: Set correct args number for DMA request from DT

Quoted 20 lines · On Thu, Dec 07, 2017 at 03:40:10PM +0000, [email protected] wrote:
Quoted 19 lines · Pierre Yves MORDRET

I did check. DT Bindings are aligned with the patch. In fact the patch was an alignment with DT Bindings.

For DT :
47c8a5035b68 ARM: dts: stm32: Add DMA support for STM32F746 SoC 01d281b6e4a2 ARM: dts: stm32: Add DMA support for STM32H743 SoC

Nonetheless I can ack the patch

~PYM~

Quoted 5 lines · Greg Kroah-Hartman
Quoted 3 lines · Pierre Yves MORDRET

Hi,

I may ack this patch but what about dt-bindings and DT ?

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines

And what commit id would that be?

thanks,

greg k-h

Greg, I'll queue these up with my next pull request.

Great, thanks for doing that.

greg k-h

#115 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

Build results:

	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 124 pass: 124 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

#116 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.68-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by on the v1 series
#117 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.68-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.68-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 3a6db4ce4b0f2b2c70dcc5d5bb8fabe98df744ff
git describe: v4.9.67-110-g3a6db4ce4b0f
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.67-110-g3a6db4ce4b0f

No regressions (compared to build v4.9.67-89-gbaa2108672eb)

Boards, architectures and test suites:
-------------------------------------

hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 33, skip: 21
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 982, skip: 121
* ltp-timers-tests - pass: 12,

juno-r2 - arm64
* boot - pass: 20,
* kselftest - pass: 33, skip: 19
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 985, skip: 121
* ltp-timers-tests - pass: 12,

x15 - arm
* boot - pass: 20,
* kselftest - pass: 30, skip: 24
* libhugetlbfs - pass: 87, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1036, skip: 66
* ltp-timers-tests - pass: 12,

x86_64
* boot - pass: 20,
* kselftest - pass: 46, skip: 22
* libhugetlbfs - pass: 76, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 18,
* ltp-fsx-tests - pass: 1,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 8,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 9,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 957, skip: 163
* ltp-timers-tests - pass: 12,

Documentation - https://collaborate.linaro.org/display/LKFT/Email+Reports

author maintainer
#118 lore raw
Quoted 16 lines · Naresh Kamboju
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.68-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Really? Any chance you all could run some graphics tests as well if you happen to have any? There were some big sync changes in here to resolve some reported issues...

Anyway, if not, no big deal, thanks for the testing of these and letting me know.

greg k-h

#119 lore raw
Quoted 17 lines · Greg Kroah-Hartman
Quoted 16 lines · Naresh Kamboju
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.68 release. There are 109 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Dec 9 12:56:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.68-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Really? Any chance you all could run some graphics tests as well if you

Based on the set of tests we've been running for some time.

Quoted 2 lines

happen to have any? There were some big sync changes in here to resolve some reported issues...

We'll add more tests some day (I hope). But right now, the set is limited to what we have.

milosz

Quoted 5 lines

Anyway, if not, no big deal, thanks for the testing of these and letting me know.

greg k-h