Skip to contentSkip to conversation

ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC

PATCH New Chris Packham 2 participants 2 messages Jan 8, 2018 – Jan 10, 2018 Arm (32-bit)

lore
Share & tools
lore

Chris Packham

author
#0 lore raw

PATCH 1/1 ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC

The DB-88F6820-AMC connects ethernet at 34000 and ethernet at 70000 which are labeled as eth2 and eth0 in armada-38x.dts. The ethernet at 30000 (eth1) is not used on the AMC board.

This eliminates the following bootup message

Device 'ethernet at 70000': seq 0 is in use by 'ethernet at 34000'

Signed-off-by Chris Packham <[email protected]>

---

 arch/arm/dts/armada-385-amc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/armada-385-amc.dts +1 -1
index 5e1588d57438..d4d127fa024b 100644
@@ -53,7 +53,7 @@
 
 	aliases {
 		ethernet0 = &eth0;
-		ethernet1 = &eth1;
+		ethernet1 = &eth2;
 		i2c0 = &i2c0;
 		spi1 = &spi1;
 	};
Signature · 1 line
2.15.1
#1 lore raw

PATCH 1/1 ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC

Quoted 20 lines · Chris Packham

The DB-88F6820-AMC connects ethernet at 34000 and ethernet at 70000 which are labeled as eth2 and eth0 in armada-38x.dts. The ethernet at 30000 (eth1) is not used on the AMC board.

This eliminates the following bootup message

Device 'ethernet at 70000': seq 0 is in use by 'ethernet at 34000'

Signed-off-by Chris Packham <[email protected]>

---

  arch/arm/dts/armada-385-amc.dts | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/armada-385-amc.dts +0 -0
index 5e1588d57438..d4d127fa024b 100644

arch/arm/dts/armada-385-amc.dts line 59

Quoted 8 lines
arch/arm/dts/armada-385-amc.dts +1 -1
@@ -53,7 +53,7 @@
 
  	aliases {
  		ethernet0 = &eth0;
-		ethernet1 = &eth1;
+		ethernet1 = &eth2;
  		i2c0 = &i2c0;
  		spi1 = &spi1;
  	};

Applied to u-boot-marvell/master

Thanks,
Stefan